Input readiness when "Local calculations" on key figure changes

Hi all,
i have a planning query with a key figure, posting period and fiscal year (just naming the important chars). the query is input ready but calculates the wrong result. so i wanted to change the way it calculates the result in the query designer, under the "calculations" tab i changed the "Local calculations" - "Calculate the result as" into e.g. "Last Value" (or average, or anything). The key figure then ceases to be input ready in a given workbook.
any ideas why this happens? what is the connection between the results calculation and input readiness?
Another line of thought for the same problem:
for a given year i need this key figure to be the same for all 12 posting periods and the calculated result to be that same number. I do not want to use fiscal year/period (0fiscper) characteristic since i then can not make a flexible tool able to work always for the same 12 periods but for different years.
is there maybe a way to make the aggregation level to derive the 0fiscper automatically from posting period and fiscal year so that when i include all three into the agg level, the query is input ready even when i don't restrict the 0fiscper?
thanks in advance,
K.

Hi friends,
Even we are facing the same problem...
Can anyone tel me why this is happening or Is it an artifact of the 7.1 GUI ?
Regards...
Balaji

Similar Messages

How to create Calculated/Restricted Key Figures in AO

All,
In our project we are consuming Bex Queries for AO Analysis. In these we have lot of calculated/restricted key figures. In bex we can restrict 2 characterstics to one Keyfigure, So can we able to create calculated/restricted KF in AO
Regards,
John

Hello Tammy,
We are having a reqauirement in which we have 5 Bex queries built on the same infoporvider and we are trying to consolidate all the 5 queries to one single generic Bex query or two. So in AO we would like to consume this query and build different AO workbooks to meet all the old 5 queries requirement.
So as part of this process, I would like to know can we create calculate/restricted KF's in AO , that way i can make a better decision to create them in Bex VS AO.
Thanks for your inputs in advance.
Regards,
John
Message was edited by: sunny johnson

Calculated & restricted key figures

can any body give me the defination of calculated & restricted key figure

Hi Leela gopal,
Calculated Keyfigure and Restricted Keyfigure both are Global Keyfigures in the Query, since we define them at infoprovider level.
Calculated Keyfigure: When you want to do calculations on Keyfigures we go for Calculated keyfigures, and this one we can use for all the queries defiend on that infoprovider.
Restricted Keyfigure: When you want restrict the keyfigures values with reference to some characterisrtics we will go for Restricted keyfigures. For example, you want to display sales for Jan in one columns and Feb in one column, then we have to create two restricted keyfigure on Sales objects one should be restricted with 0calmonth on Jan and other should be with 0calmonth on Feb.
Hope you understand.
Veerendra.

APO DP - use of key figure change mode 'Redisaggregate'

I am using the macrobuilder in APO DP V5.
Here one can use a 'redisaggregate' change mode for a key figure.
But what is a practical example where this could be relevant and useful?
Thanks,
Bob Austin, Atos Origin

Srinivas,
Thanks for this.
I now understand the concept.
But what does the 'redisaggregate macro' look like?
Suppose I have key figure X with disaggregate key figure APODPDANT.
I have a fcst run at high level, and I recalculate APODPDANT.
What is the structure of the macro to now apply the new APODPDANT values?
Is it something like key figure Y (change mode = redisagg) = key figure X?
Thanks,
Bob.

Calculations for Key Figure at CUBE Level or REPORTING Level

Hi Folks,
What are the conditions to decide whether we need to go for keyfigure calculations at infocube level or at reporting level.
How to achieve them if done at cube level.
Could anyone provide some KT with examples?
Regards
Kittu

Hi,
I got your point.
Could you tell me how to use below mentioned formula at transformation time?
In brief the formula calculates the number of policies using field " s endorsement type".
Formula is as below:
SUM(CASE WHEN S Endorsementtype IN ('004','015') THEN -1 WHEN S Endorsementtype IS NULL AND S Gross IS NOT NULL THEN 1 ELSE 0 END)
No of policies is a calculated keyfigure.I dont have this field in my datasource.
could you tell me the steps ?
Regards
kittu

Calculation of key figure

hi
in BI 7.0 i want to calculate 'Revenue' using formulae in Transformation like
Revenue = sale qty * unit price
where can i give the formulae whether in start routine or transfer routine.
pls give the steps.
and also i used formulae in BEx like Revenue =saleqty * unit price.
but in the result it is showing BOTH CURRENCY&UNITS like Ex: 20,000 INR KG.
SO PLS give me steps to solve it
thanks
regards
venkat

Hi,
Here in this case youn give a simple formula inspite of routine.If you give any routine it 'll degrate your loading and query performance.
Just creat anew info object and assign this to cube and activate it.After that go for Transformations map t he Price nad Quantity to newly created info object and double click on that new object ther you can find new window ther under "Rule Type" click the mouse here you can find the 'Formul',select that.It 'll opens a formula window ther give the formuls as price*quatity.save it and activate the transformations.
I hope this 'll help you.
assign points if this helps
Regards
JT Goud

Syntax error when creating input-ready query

Hi,
When creating an input-ready query, I set the key-figure to 'Data can be changed by user entries or Planning Functions' in the Planning Properties in the query designer.
When I execute the query, I get the following error:
Syntax Error in : CL_RSR_RRK0_KEYFIGURE
In se24, the class has a syntax error in its Constructor method.
The error is not occuring when I change the Planning property to 'Data Cannot be changed' or 'Data can be changed via Planning Functions'.
Has anyone encountered such an error. If yes, how to proceed further?
Anything do with the the ABAP Patches. Currently I am in Patch13.
Thanks,
Balaji

Hi,
Plz apply the notes 1042924 and 1043103.After appling the notes regenerate the
query.
This should solve the error.
Regards,
Srikanth.

Input ready Query - Issue No data available

Hi Gurus
Part of the sand box build I created a real time cube and an aggregation level. I have created an Input ready query and ensured the key figures are having the option of Data Can be changed . Chars are selected with only Master data option.
Query is checked to be started in change mode and extyernal access allowed.
I have run the filter and restricted the master data on company code and business area.
When I execute the query I get a No Data Available . I dont even see the formatted struicture of Master data of selected chars and then Key figure ready to input.
We are on latest SPS . Please advice if I am missing some thing or give tips on how to build a successful Input Ready Query.
Points will be awarded.
Thanks & Regards
Edited by: IASIPS on Feb 7, 2008 3:33 PM

Hi,
there is an easy example in the documentation
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
In this examply you may set 'access mode for result values' to 'master data' or 'characteristic relationships' and use a reasonalbe filter on product. Then the query will also show non-posted values.
Regards,
Gregor

Characteristics to be input ready in column like keyfigure

Hi,
I'm working on IP and the requirement is that, user wants to enter free text per line item in Excel based layouts.
I have created an input ready query on an Aggregation level and set the key figure as Input ready.
Now i want the characteristic "free-text" to be input ready as in case of Key-figure so that i can enter text data per line item.
For new row i'm able to enter values for "free-text" ; but it should be column-wise rather than row wise
Characteristics : Material, Plant ,Comp Code, Material-Grp free-text
Keyfigure : Net price
Thanks
pratyush

Hi,
for entering free text please use documents. They allow you e.g. to store comments.
If you want to enter the free text in a certain characteristic this is called "Master Data Planning", because what you try is creating new master data. "Master Data Planning" is not supported. Nevertheless you may search this forum to find some interesting information about this topic.
So you see using documents (e.g. as comments) and Master Data Planning are two different things. Please check, what you want.
Hope this helps.
Matthias Nutt
SAP Consulting Switzerland

Problems when removing reference of a key-figure structure

Dear All,
While working in the query designer, when I remove the reference from a globally used key-figure structure (using the context menu of the structure) for some editing, the query output is then not the same as it use to be when the reference was not removed.
Do we need to maintain any setting or activate/generate the KF structure once it is changed from its initial state (like in the above case I discussed).
My Exact problem : - I have a input ready key figure (for planning) that remains input ready when the query is executed without removing the reference from the structure, however when i remove the reference from the structure, it becomes non-input ready.
Please suggest.

Dear All,
While working in the query designer, when I remove the reference from a globally used key-figure structure (using the context menu of the structure) for some editing, the query output is then not the same as it use to be when the reference was not removed.
Do we need to maintain any setting or activate/generate the KF structure once it is changed from its initial state (like in the above case I discussed).
My Exact problem : - I have a input ready key figure (for planning) that remains input ready when the query is executed without removing the reference from the structure, however when i remove the reference from the structure, it becomes non-input ready.
Please suggest.

Key Figure doubles in value when loaded to data target

I have added a key figure to a copy of the standard inventory cube 0IC_C03. When I load the key figure it has the correct value in PSA but doubles in value when loaded to the cube. The mapping is one to one, why is this and how can I resolve? Thanks

Hi,
You might have done compression for BX and BF LOADS with MArker update
or
you have not yet done compression at any request.
With rgds,
Anil Kumar Sharma .P

Using Explorer with Calculated Key Figures from BEx (BW 7.31 / BI 4.1)

I'm looking for suggestions on how to leverage data from calculated and restricted key figures in BEx (from a BW 7.31 system) with Business Objects Explorer (from a BI 4.1 system). Our current process involves some complicated workarounds and with the implementation of BI 4.1 and I'm hoping to streamline things a bit.
Here is what I had in mind...
An information space (indexed daily) sitting on a universe (hopefully UNX) that referred to a BEx query on a multiprovider in BW. My understanding was that universes would be able to consume BEx queries (including their restricted and calculated key figures) in 4.1. Based on a recent post (http://scn.sap.com/thread/3417905), it appears that the feature that I was hoping for may have not made it into the GA release. Obviously, I could move the calculations and restrictions into BW ETL or maybe into the universe, but since that work has already been done and lives in the queries, I'm hoping to use them! Also, we could use a different tool such as WebI, but at this point the user base is comfortable with Explorer and we would like to continue to use it.
Suggestions?
Thanks!
-S

Hi McDowell,
Regarding to the BEx connection in Explorer, SAP provide two solution
1. BWA connection
2. Unv on top of connection
For the UNV situation, you could use the calculated / restricted key figure in the system but please assgin the aggregation level for them (Database delegate is not supported if I am not wrong)
Also plese consider two points
1. Data size (UNV cannot support large data size)
2. Scheduling (Explorer does not support event trigger? correct me if I am wrong)
Best regards
Alex yang

Filter by Key Figure or Calculated Key Figure?

Hi,
Is it possible to filter a report on key figure or calculated/restricted key figures? If yes, then how?
Here is an example of my problem:
I have a restricted key figure for invoice that picks out the last invoice value between two dates (variable), for instance 2004-01-01 and 2004-12-31. Now, in my query I would like to EXCLUDE materials which dont have any invoice values between those dates:
Now:
Material A 1000 USD
Material B
Wanted:
Material A 1000 USD
Best Regards
/Daniel

Hi Daniel,
you would use Conditions to achieve this! You can create them in the Bex Query designer.
Regards,
michael

How to display the single characterstics (top one) wrt key figure

Hi,
I have got a reporting issue like::
Values in Cube-
GL     Fiscal year/period     Doc no    Amount
1         2004.006                 1              10000
1          2004.006                2               15000
1          2004.007                3                20000
i want to show in my report as--
1      2004.006                  1               10000
1       2004.007                 3                20000
i.e it should pick only the first line from cube corresponding to the 2004.006 period..

Hi,
You have 2 options
1. you can create a transformation and write a starteroutine so that it takes the first record of the document number. but in practical it is not advisable because the cube contains inconsistant data and you cant develope any other reports on it.
2. Next option is
Step1
You need to write the user-exit to populate Reporting related variables in the Enhancement assignment RSR00001 and select the FM EXIT_SAPLRRS0_001 and then in the include ZXRSRU01 we need to write the code. These are helpful especially we need to derive any varible. (here in your case you can create a customer exit variable for Document number not ready for input)
Along with that:
BEx User Exit allows the creation and population of variables and calculations for key figures and variables on a runtime basis.
Step2
After creating the variable , For populating the values use the Function module RSDPL_CUBE_DATA_READ to read the data for the cube and populate the same into the internal table.
Step3
For the internal table you need to sort the document number and the date so that it picks the top most record in displaying the data. and in the out you will get as you requirement is
1 2004.006 1 10000
1 2004.007 3 20000
Last option but looks silly
Develop one more Cube which is above your existing cube . and develope a start routine which takes the first record from the cube. and now you can develop the report based on the new cube ( in this new cube the data will be there for the first record)
hope this helps
Santosh

Assigning a Key Figure in a Multi provider

In a multi provider if I have a key figure which is assigned from more than one part providers. What does this exactly mean? For example:
Let's say I have a key figure Number of Sales which is present in two part providers and assigned from both the providers, if I build a query say Country | Number of Sales what happens with the assignment
Thanks

Good point.
My scenario is as follows.
1. We are building a query which uses a base query as a template.
2. Our query is built off a seperate multiprovider which replaces one of the part cubes with a cube that has consolidated set of data from SAP and Non SAP systems
3. In the original multi provider one of the key figures is assigned from two part providers, one of which is that which we are replacing - this key figure is used extensively in the definition of other query level key figures
4. The key figure does not exist in the consolidated cube but we have a key figure that we will use instead of.
5. The original query does not have info provider restrictions at the query or local key figure levels
I believe I can sum the two figures when I define the Key figures in the new query but just needed clarity on if this is a solution hence wanted to confirm the values are being summed up assuming no restrictions etc
Sorry guys,
before I close this message I just wanted to confirm the following, do not want to save/activate the change on the system
I have carried out a check after I removed the assignment from one of the part providers it seems that this is possible - this is correct. If this is the case it seems that the business requirement is to sum the values from the two part providers
I
Edited by: Niten Shah on Jul 9, 2008 6:44 PM

Input readiness when "Local calculations" on key figure changes

Similar Messages

Maybe you are looking for