Input ready field

I have a query with three key figures, one is not input ready(amount) and the other two are input ready fields(budget1 and budget2).
I am able to enter the budgets in input ready fields and save the data, but the amount field is not showing the data from the cube.
Any help is appreciated!
Edited by: RamyaAshok on Sep 11, 2009 2:52 AM

Hi
Please cf note : 1337901
Regards, Hyma

Similar Messages

  • Prevent entry of negative number in input ready field

    Hello,
    In layout, in quantity input-ready fields, planner should not enter any negative number, if he tries to do so or by mistake, system should give error message.
    is this possible in BI-IP planning layout for input-ready fields ??
    thanks,

    Hi Jasmi;
    Sorry the late answer...
    Regarding your first question... you can built a function module to do the same. However, in this area I don't have ABAP knowhow to help you.
    There is no standard way to do it. This means definitions on the query or a formula.
    second question... in SE91 you had create a class message (like my example ZBI_IP) and a message number (in my example 004). Don't forget to add the text "no negative values allowed" to the message.
    I forgot to add (sorry again) the E of E004 means Error. If you want you can put W as warning. If Error the sequence of formulas stops. If Warning it continues (but it's better you double check).
    Reading the code...
    FOREACH ECON, FUND,PROJ.
    IF { YORCINIC, ECON, C_PL,NP_AC} < 0.
    MESSAGE E004(ZBI_IP).
    ENDIF.
    If I have a combination of ECON, FUND and PROJ for KF YORCINIC where the value is less than 0, the system presents the Error message 004 of the class message ZBI_IP.
    Tell me if this is good for you;
    Kind regards;
    Ricardo

  • Focus for the input ready field in table

    Hi,
    i have few questions
    1. i have table with tool bar button "add row" when i click that it will add a row with input ready field,  but here i need scroll down for that, but what i need is it should automatically put the focus on it. please suggest how can i do that.
    2.  I have save button, when ever user enters improper input in the above input ready fields, i am giving error message, problem is it is clearing my table data at the same time, Please suggest where should i raise the error message.
    3. i need two columns to be fixed in the table, while scrolling horizontally.
    Please give your suggestions.

    Hi,
    Check the component for example wdr_test_table for COLUMN SCROLLING.
    If you have 15 columns to be shown. Set the first 2 columns as (LEFT as fixed) and scrol count as 4.
    For the first 2 columns set the property FIXED POSITION as LEFT and for table property scrollable colcount as 5.
    Then you will get the scrolling adn also columns as fixed.
    Regards,
    Lekha.

  • How to use Query-views as input-ready

    I have a input-ready query working fine saying the IP field is input-ready, and a value can be entered.
    If I save the query as a query-view and want to use the view instead, the input-ready field change to 'not input-ready'.
    Hence, can query views not be used in IP ?
    Thanks in advance, Mikkel

    Hello,
    My first question is can Apex 3.1 work with 9.2 - 10.1 - 10.2 and 11.1?Correct. That's said in the installation guide.
    My second question is how can I open the Query Builder inside the Create Region>SQL Report wizard to my users inside a custom user defined form?This does not yet exist out of the box. You can have a look how Oracle did it and try to mimic it in your own application.
    My third question is if the answer of second question is it is not possible, then anyone can advice on alternatives for this kind of a need with Apex?Import app 4500 in your own workspace. On page 1002 you should find the query builder.
    Again you can't just run this, you would need to make customizations to it. Alternatively you can add just a textarea on a page where you can run SQL statements from. But I guess you want to have the graphical display?
    My last question is how Apex can handle a distributed database environment, like Java applications can it open several database connections as needed?APEX is living in the Oracle database. So everything inside that database you can potentially work with. If you need data from other sources you can use a database link or hytrogenous connectivity. Basically if you can do it from the Oracle database, you can also do it from within APEX.
    Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://www.apex-evangelists.com/
    -- http://www.apexblogs.info/

  • Input Ready Query without unit / currency

    HI ,
    In my input ready query, it is enabling along with the unit / currency. How to show the input ready query without unit / currency
    if I use NODIM() function, it is not possible to creating input ready field.
    Please suggest me is there any way to create input ready field without unit / currency.
    Thanks and regards
    Rajesh

    HI Hyma,
    1.use the currency / unit field in the filter or drilldown
    In this case if the query may have more than 2 fileds which are input ready having differnt unit/ currency, for Ex: Amount = Quantity * Rate
    Currency for amount and Rate is INR and for Quantity is Tonnes. if I restrict both INR & TO in filter, in the system it will store both currency and unit for amount, rate and quantity.
    HI Andrey,
    2. 0CURRENCY or any currency IO that you use in ROWS of query
    In this case also, if I use only one type of currency/unit as input ready then it is fine,, but in my query I want to use more then one currency/unit at a time.(As above Example)
    Please suggest me how to solve this...
    Regards
    Rajesh

  • Fields in Input Ready Query and Aggregation Level

    Hi All - New to IP. What if we dont include all the fields of Aggregation level in Input Ready Query.
    Supose there are 4 fields in Aggregation level and we are including only two in Input Ready Query.

    Hi Harry,
    For a Keyfigure to be input ready, all the characteristics of the Aggregation should be filled with some values at the time of input.
    The characteristics should be either in Static Filter, Dynamic Filter, Row, Column. New Selection.
    If a characteristic is not there in any of the above area then it is considered to be null and query will not be input ready.
    Regards,
    Gopi R

  • Date field in Input ready query

    Hi Folks,
    I have created a input ready query on transactional infocube.
    Its working fine and able to input for keyfigures except one keyfigure it is Date Keyfigure.
    I just created one more keyfigure with Datatype as Date so that user will able to enter date aswell in input ready query.
    but problem here is  I have done same changes/enable for the date keyfigure like remaining keyfigures.
    in query anylazer i cannot see input enable for the particual date keyfigure.
    please let me know what are the steps need to do extra for the particular date keyfigure to make enable for input..
    Thanks.

    Hi,
    Thanks for your response.
    if it not happened by IP is there any other option available to update changes in to DSO/Infocube.
    one more thing.I have a created one Multiprovider on the transactional DSO then i created query on the multiprovider,but in query designer i cannot change the option to change mode for the keyfigures.its in display mode only.
    why it is not enabled.is there anythying missing to do..
    Thanks..

  • How to allow users to record new lines in an input ready query?

    Dear All,
    I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
    I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
    In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
    Is it possible to create an input ready qurey in such a way?
    Thanks in Advance,
    Dezso

    Hi Dezso,
    Yes,
    If you want the query to work like a "from transaction data" layout.  Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values"  Then only lines with posted values will appear.
    M.

  • IP: Use of input-ready variable in planning function

    Dear all,
    I'm using an input-ready variable for fiscal year (0P_FYEAR) in my input ready query. It's used for restricting my columns.
    I'd like to use the value of this variable in my planning function and I use VARV for that in the FOX.
    However, when implementing the pl.function as a button in the BEx Analyzer I need to fill in the static parameters the VAR_VALUE_1 with a value.
    If I delete this line from the static parameters my plfunction end swith an error.
    I like this value of course to be filled with value of fiscal year entered by the user when starting the query.
    Does anybody know how to solve this?
    Kind regards, Harjan

    Hi Johannes,
    Thanks for all the useful information!
    Another thing on using PF.
    I've got two workbooks with different queries but using <u>same</u> filter.
    Queries differ in keyfigures, but are on same cubes in MultiProvider.
    I can run the workbooks simultaneously: no locks occur.
    I've got two planning functions that make calculations on the keyfigures entered in the workbook.
    However when I inplement the PF's in both workbooks and assign the dataprovider as filter, i do get locks!
    So, the PF also uses the same filter, but doesn't take into account the different keyfigures.
    In the fox-formula i don't have the option to make conditions on keyfigure values (field keyfigname), neither to enter them in the filter.
    Do you have any thoughts on this?
    <u>Second</u> point:
    When i filter on a navigational attribute and execute the pf, i get errors on my pf.
    It states it can't find the value of the characteristic to which the navigational attr belongs. F.i. when i filter on nav attr 'customer group'  (attr of char 'customer') and execute pf, the system gives an error on the value of char 'customer'.
    It states: value of characteristic customer is notincluded in the selection.
    Any thoughts on this one?
    Thanks in advance!
    Kind regards, Harjan

  • Can we enable Info Objects as input in the Input Ready Query...

    Hi Folks,
    As I wanted to implement Input Ready Query for Planning in which User has to enter Charactersitc Values apart from Keyfigures.
    Per Example:-
    Project Number and Budget are Fields in Input ready query. Here user wanted to enter Project Number and Budget values Manually.
    Is it possiable, if yes, can you give me your idea how to implement this scanario in IP by creating Aggregation level or Input ready query.
    Thanks,
    Venkat

    Dear Snehith,
    Thank you very much for your quick responce, Since Thursday and Friday are weekend holidays for me that is the reason i didn't respond your answer. Sorry for the my delay responce.
    In my business case is here only one time selection only not for every row selection.
    Before post this i was created One Planning Cube>on top of this i created 4 Aggregations Levels>created Planning Filter with respective aggregation Levels > Created 4 Input Ready Queries with respective 4 aggregation levels>Created one web template>used Tab Strip Container Web item and assign 4 Input ready queries to 4 data providers>Created Variables for Exe Department in Inputready queiry and assigined to Data Providers in WAD.
    Now my Web template is asking user input and giving Exe Department values and then entering to out put where user can able to give values and save plan values. But Exe Department characterstic is also displying in Coloum area which should not be displyed in my case. becase of whater characterstics assigned to Dropdown they should not appereard in Coloum area.
    How can i do this.? Can you provide your views...
    I hope you clear what i am mean here..

  • Problem when Entering Decimal Values at Input Ready Query

    Hi Everyone,
    I have created Input ready query but when I am going to enter decimal values in input cell it takes as a round of value.
    Example:- If I enter 1.234 value at input cell it takes as a 1 or if I enter 1.789 value then it takes as a 2 at cell.
    The technical properties of Key Figure at Info object level is,
    Radio Button :- Decimal
    Drop Down :- FLTP (Floating Point)
    But we want to whatever value will enter at input cell, the same value will save at real time info cube level.
    Requirement :- If I enter 1.234 value at input cell it needs to take as a 1.234
    Please suggest your comments/views.
    Thanks
    Kind Regards
    Anukul

    Hi Giradkar,
    Check the setting of the UOM you are using in table 'T006' there are 2 fields that indicate how to display and how to store the values with respective UOM.
    Regards,
    Eitan.

  • Copy Input Ready Query Variables into Planning Sequence

    Hi all,
           We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
           We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
          I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
    1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
    2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
    3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
       when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
        Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
    Thanks for your time,
    Ram.

    This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

  • Restriction data entry for input ready query

    Dear All,
    I have an input ready query with two structures for rows and columns.
    However, I have set one of columns' structure's member as "data can be changed with planning functions", i'm able to enter data for that column. When i execute save function, entered valus are being disapperaed.(not benig written to the cube)
    But i want to restrict data entrance for that column. (Like display functionality in BPS)
    I know i can protect fields with excel functionality, but we are using web environment.
    How can i resolve mentioned issue?
    Thanks
    Alkan

    Hi Bindu,
    Thanks for your quich answer.
    In web environment, i think i need to use WEB API.
    Do i need to write java script? Or is there any particular class to manage the properties of the cells?
    BR
    Alkan

  • Input ready query input help

    Hello gurus,
    I have a requisit to have 0COMP_CODE on F4 input help of 0COSTCENTER. I've changed the attributes of char 0COSTCENTER to display this field.
    However, when i do F4 on input ready query, this field is not showed. I have to change Value Help Attributes, but this settings is only for user that has changed thos field.
    My question is, can i make this settings as standard?
    Thanks in advance,
    Vitor Ramalho

    Dezso,
    We looked into using Navigational Attributes in SP7 and found that Input Queries were unable to process them. Unless there has been some specific enhancements I do not believe that anything has changed here.
    I recommend raising an OSS and getting clarification from Waldorf. The SAP Help page on input queries in IP also provides some clarification in this respect.
    Hope this helps.

  • Locking Keyfigures in input ready queries based on characteristic conditions

    Hi All
    I have a input ready report in WAD where I have to lock the fields according to a particular status. Basically we have different users accessing the report and only certain rows based on status should be input ready and others should be locked for input.
    Please let me know how this can be implements and steps to do this if possible
    Thanks
    Preethi

    Hi,
    you can use data slices to achieve your requirement
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/1c3d3f31b70701e10000000a422035/content.htm
    hope it helps.

Maybe you are looking for