Input Ready Query does'nt work

Hi Experts,
Thanks for your time ..Input query does'nt allow input data through Web application...
Following steps that I have done
1) Created a Real time cube.
2) Created Aggregation level .
3) Included all characteristics that are'nt required as Free characteristics in the plan query and placed material in Row and Amount in Column with restriction with version,Value type .
4)Had Set the property for Planning "Start query in Change Mode" for the query.
5) Set the 'Key Figure' Planning Property to "Input ready" for the Restricted Keyfigure in Column.
I dont know where I'm missing but cells are'nt for Input . I would appreciate if some one can help .
Thanks n Regards
Sri

Hi,
You can check if that query is input ready in RSRT2 (or RSRT with display as html mode), but you cannot insert new rows there. To do that you have to use bex analyser or web.
check if you have at least one characteristic as lock relevant. Also you can find some notes about input query problems. Search by "new rows" or "new lines" in notes. I am sorry I don't have those note number right now to send you.
I hope this helps
Regards
Lucimar

Similar Messages

BI IP input ready query not working

Hello,
I have created an input ready query on a aggregation level and am trying to create a planing application using analyzer.
However the query is not opening in inout ready mode at all. I have checked the setting in Querry design and it is ready for input.
Please help.
Regards,
Vijay

Hello,
I think problem with the buffer. I have two option for you. Please check it and let me know if you need any further help.
1) Check the notes 1136163, 1138864, 1146957, 1179076.
In case of no other solution, You can use program RSR_GEN_DIRECT_ALL_QUERIES with proper variant for query generation. You can automate this process using a process chain.
2)please check the below;
Delta buffer query in RSRT for BI-IP ("<infoprovider>/!!1<infoprovider>)
Planning query donu2019t show the current data
Thanks.
With regards,
Anand

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

Data from an Input ready query back into BW

Hi All,
One of the reports I am working on should allow users to write comments for each characteristic value (i.e in each row). I have toyed with different ways of doing it, but based on our company specific requirements, I have finally arrived at this design - Users enter comments in a column in an input ready query and the data is sent back to a real time cube.
However, I have never done this kind of stuff before. Can anyone please give me a step by step procedure of how to achieve this?
The most informative answer will be rewarded with the highest points.
Thank you.

I had already tried the document property in BI, but unfortunately it did not seem to work. This is the error I got when I did a right click on a characteristic value -> Documents -> Create new comment
u201CCannot determine the KM folder for storing documents with these types of propertiesu201D
u201CError while launching new document dialogu201D
http://img184.imageshack.us/img184/6505/docproperror1wg8.jpg
When I asked my basis team about this error, they had no clue what it meant and they thought it had to do with KM, and currently we do not have KM enabled in BI portal. Thats the reason why I had look for an alternative. However, I am pretty sure its not a KM issue because I believe "Characteristic is a Document Property" is a standard out-of-box BI property.
Do you know what that means and how to fix it?

Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

Chars in columns for Input Ready query

Hi
Hope every body is just doing fine. I am puzzled with following doubt when compare BPS layout builder to IP input ready report. Please help me to clear some smoke here.
We have a simple input ready query to enter some values in the key figure for given combination of characteristics for 12 fiscal year periods in the year.
BPS >>> In BPS manual planning layout we would have selected the Key figure and Fiscal Year Period in data column and profit center and Plan Year in Header and Other characteristics like GL account,cost center in lead column so that we can hide the Fiscal year period by restricting the values of key figure for particular fiscal year period value while creating columns in Data columns like Jan 07. etc
IP>>> So in IP, I have fiscal year period in aggregation level with all other chars and key figure. In input ready report, I have used the structure to pull the key figure and fiscal year period value to come up with column and not included the key figure in rows or columns of report but when I was executing the query system is automatically including the fiscal year period as free char. I am puzzled on how this is going to work. Is fiscal year period not populated automatically based on column.
Your inputs are highly appreciated with point.
Thanks,
Raj.

Hi Raj,
Experiencing similar problems. Which GUI are you on ?
thanks
Ian

*****Can we make charcterstics as a Input ready in the input ready query.**

Hi experts,
Our business requirement as follows.
the existing business scenerio is, Master data ( say Product list ) )will comes from CRM , By using the input ready query , we will plan against to that master data by using IP.
But my requiment is " though the master data is not avilable( say new product came into the market which is not avilable in CRM) in the CRM end, user wants to enter the that product name directly in the input ready and also user wants to plan against that product.
As per our requirement , user wants to enter charcterstics directly in the query like entering the key figure values directly in the input ready query.
As per as my knowledge concern , this functionality is not avilable in IP.
so can you please suggest if any other work around solutions for this to fix this issue.
Thanks,
Subhratha benargeee.

Hi Subhrata,
As I said, its not possible in IP at all. If we talk technically, IP infrastructure needs SID's. Meaning it communicates through SID values.
Once you enter characteristic value in the query, the system automatically sends the SID values to OLAP when the round trip happens. There was a certain period of time, when system automatically used to create sid's if there does not exist that value in master data for the characteristic. I dont remember the exact support pack, But that was a bug and has been fixed. Its not possible in any form web, bsp or bex analyzer on OLAP write infrastructure. As long as you dont find some RFC which can write this value to the master data table of the characteristic before the OLAP is triggered.
I understand you are writing transaction data only, But OLAP works through SID's when it gets data from infoproviders. So due to the same reason without an entry into sid and master table of the characteristic there can not exist an entry in the infoprovider. OLAP simply can not communicate without SID's.
Now coming to the scenario I explained earlier, its Business Planning & Simulation. If you design your planning application on BPS, you can design web interfaces which is a BSP application can achieve what I said.
Its not the speciality of BSP(business server pages) which is making it possible, But the BPS interfaces are designed such a way that it communicates directly through master data and text table of charcteristics.
As of now, I do not have a solution for your scenario on IP, If I find or come across one I will surely let you know.
All the best.
Best regards,
ravi.

Disconnect when I open Input-Ready query

Hi
I've added a new infoobject to my aggregation level in Integrated Planning and updated my input-ready query. But when I try to open the query it just disconnect from the server.
Does anyone have an idea why?

Hi Srinath
I hv activated the agg. level.
I've also deleted all data from the rt-cube to be sure that the problem isn't related to the data.
Furthermore I've tried to remove the new infoobject from the agg. level - and then the input ready query works again. But as soon as I add the infoobject it disconnect when try to open the query

Key Figure in a Input Ready Query

I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE MODE turned off. But once I turn it on it is not showing any data for the key figure. This is happening only wiht that key figure, all the other key figures are working fine. Could someone help fixing this
Thanks
Rashmi.

Hi,
I do face this type problem during my BI IP implemenation project. Pls chk thoroughly the following points.
1.The planning mode of your real-time infocube should be on always on( you need change from load to planning mode, while inputting data).
2.The START QUERY IN THE CHANGE MODE , should be on.
3.In the planning tab of key figures, ensure you enable the button : Data can be changed using planning functions.
4.In the advanced tab of key figures, pls make sure to enable the right button( Master data).
5.Pls make sure , the real time infocube, aggregation levels, filters etc, should be refreshed & active,if make any changes in planning model in between, in Aggregation levels,filters etc.
6. Pls chk the locks( SM12) always, and delete all of them, if any.
7. Log-off the Server (BEX/DWWB) and restart the BEX ,then open your Input query, it should work .
Regards
CSM Reddy

How to create an Input Ready Query in Bex Excel with no transact data

Hi
We created a query where we want the user to put in NEW LINES. This query has in general no data when user starts planning.
We have 2 front-ends for this, Bex Web and Excel. Both shows initial 'no data available
BexWeb': Implementing the command set_data_entry_mode we get all the relevant columns for the input
Excel: Command set_data_entry_mode or set_input_mode does not allow the users to insert new lines. Still error message pops up 'no data available'
Do you have a solution for that ?
Regards,
Thomas

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

Problems with Input Ready Query

Hello All,
I'm facing problems with input ready query for BI IP.
I've created the input query on aggregation level and maintianed all the planning settings. It is not allowing me to edit, when i'm attaching in the web template.
I also attached a button copy function, and i'm able to execute it and save it, but it not allowing me to change manually.
I also enabled the 3rd option for keyfigures...data can be changed with planning functions and user input.
Please help me in this regard.
We have just started the development of BI-IP, please suggest me if there are any notes to be applied.
Regards
Kumar

Hello Johannes,
Yes I've set to the finest granularity...even if it is Only one characteristic and one key figure without any restrictions...
I've checked even planning tab page under properties...it is also fine..
But still it is not allaowing me to go to edit mode...this is a fresh instalation and the query i'm working is the first one...
Please suggest me if there are any notes to be applied, we are on Support Pack 10.
Regards
Jeevan Kumar

Show last data 0 in an Input-ready query - Bex

Hi experts,
I have an Input-ready query working ok with IP (Integrated Planning).
The infocube contains information about date/material/stock_quantity (via DTP, date and material, and real-time introduced stock-quantity), the user (via Bex) only introduce the stock quantity.
This is an example of the real-time cube data:
Date Material Quantity
02/03/2011    M1     1000 (input via Input-ready-query)
03/03/2011    M1     0   (planned via DTP)
04/03/2011    M1     0    (planned via DTP)
05/03/2011    M1     200 (input via Input-ready-query)
06/03/2011    M1     50    (input via Input-ready-query)
07/03/2011    M1     0    (planned via DTP)
I want to create a query-workwook that displays: if stock_quant.=0, show the last value <>0 of this material, if stock_quant<>0 it's ok:
Example workbook desired,
02/03/2011    M1     1000
03/03/2011    M1     1000
04/03/2011    M1     1000
05/03/2011    M1     200
06/03/2011    M1     50
07/03/2011    M1     50
Do you know how could I show it via Bex-workbook or other loading way ?
Thanks!!

Hi Marcel,
an idea could be to create a virtual key figure and then to use it in the desired bex query. You will need also a way to create an mdx (pre-) query on the fly in order to have the quantity history of the material(s). This is a better approach than reading directly the infocube.
Take a look at the how to guide "How to ... Realize summarized display of stock values on storage location level". The specific scenario is quite similar with your own requirements. You can find the document on URL http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/eb9faa90-0201-0010-cc9c-cd2e6c0a549a
Kind Regards,
Theodoros

Input-Ready Query

Hey everybody,
I have a problem with designing my input-ready query.
I know that I have to restrict the data that every record can uniquely be identified.
If I define a very strict filter, I can enter plan data.
But if I add only one characteristic to the columns area and execute the query, I get the message:
"The selection on the characteristic XY is to complex for the default value".
What does that mean?
Why can´t I add characteristics to the columns ares?
Thanks in advance,
Philipp

hi,
Beacuse as the message says its too complex.
If you have 2000 characteristics values or for eg. 0material,
and if you try to take it in columns imagine what will happen.
for that reason if you want to use characteristics in column
you need to restrict it.
as we usally do with time characteristics which are widely
used in columns to restrict the key figs.
hope it helps

Problem with input ready query with structure in Rows

Hi,
First I have created an input ready query without a structure where I have GL accounts in rows and key figures in column. It works and I can see that the cells are ready for input when I launch it in web through query designer.
Later, I am replacing the GL accounts in rows with a structure. Each line in the structure is combination of GL acctUoMChart of Acct (all restrcited to single values). Here comes the issue. When I run the query again (launching thru query designer) it dumps. Any idea?
Also, please let me know whether the planning applications can be made using BEX analyser OR WAD ?
Thanks a lot in advance.
Regards,
SSC
Edited by: sapsem con on Feb 19, 2009 2:38 PM

Hi,
Can you check ST22 for the dump analysis.
Also, planning applications can be built using BEx analyzer or WAD.
Check this link for example and step-by-step procedure to do the same.
http://help.sap.com/saphelp_nw70/helpdata/en/43/a18462c8291d9be10000000a1553f7/frameset.htm
Regards,
Deepti

Input Ready Query does'nt work

Similar Messages

Maybe you are looking for