Input ready query text field

As per previous posts, I have enabled the document property for a char that references the keyfigure and added a field to store the comments.Also added Single Document web item along with the analysis web item.
But I couldnt find HTML code to make it work .
Can anyone please provide me the HTML code that is used for this requirement.
Thanks in advance!

Similar Messages

Input ready query input help

Hello gurus,
I have a requisit to have 0COMP_CODE on F4 input help of 0COSTCENTER. I've changed the attributes of char 0COSTCENTER to display this field.
However, when i do F4 on input ready query, this field is not showed. I have to change Value Help Attributes, but this settings is only for user that has changed thos field.
My question is, can i make this settings as standard?
Thanks in advance,
Vitor Ramalho

Dezso,
We looked into using Navigational Attributes in SP7 and found that Input Queries were unable to process them. Unless there has been some specific enhancements I do not believe that anything has changed here.
I recommend raising an OSS and getting clarification from Waldorf. The SAP Help page on input queries in IP also provides some clarification in this respect.
Hope this helps.

Fields in Input Ready Query and Aggregation Level

Hi All - New to IP. What if we dont include all the fields of Aggregation level in Input Ready Query.
Supose there are 4 fields in Aggregation level and we are including only two in Input Ready Query.

Hi Harry,
For a Keyfigure to be input ready, all the characteristics of the Aggregation should be filled with some values at the time of input.
The characteristics should be either in Static Filter, Dynamic Filter, Row, Column. New Selection.
If a characteristic is not there in any of the above area then it is considered to be null and query will not be input ready.
Regards,
Gopi R

Date field in Input ready query

Hi Folks,
I have created a input ready query on transactional infocube.
Its working fine and able to input for keyfigures except one keyfigure it is Date Keyfigure.
I just created one more keyfigure with Datatype as Date so that user will able to enter date aswell in input ready query.
but problem here is I have done same changes/enable for the date keyfigure like remaining keyfigures.
in query anylazer i cannot see input enable for the particual date keyfigure.
please let me know what are the steps need to do extra for the particular date keyfigure to make enable for input..
Thanks.

Hi,
Thanks for your response.
if it not happened by IP is there any other option available to update changes in to DSO/Infocube.
one more thing.I have a created one Multiprovider on the transactional DSO then i created query on the multiprovider,but in query designer i cannot change the option to change mode for the keyfigures.its in display mode only.
why it is not enabled.is there anythying missing to do..
Thanks..

How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

Error on a input ready query

Hello SAP Gurus,
Can anybody advise on the following error of an input ready query?
u2022 Error reading the data of InfoProvider ZIPNA002 - Notification Number DBMAN 305
u2022 Error while reading data; navigation is possible - Notification Number BRAIN 289
u2022 System error in program CL_RSPLS_PLAN_DATA and form GETREQ_FREE-01- (see long text ) - Notification Number BRAIN 299
The query is based on an aggregation level (integrated planning)
The filter has a navigation attribute variable for the characteristic 0WBS_ELEMT__0PROJECT Project definition and in the line a list of 0WBS_ELEMT PEP elements should be displayed for planning.
We are with support package SAPKW70017 SAP NetWeaver BI 7.0
Thanks and best regards,
Patrícia

Hi Patrícia
first check in transaction SNOTE that there are no inconsistent notes (no lightning icons). If not, tell your basis team to fix it.
Then check in transaction SPAU that there are no inconsistent objects (everything must be green). If not, tell your basis team to fix it.
Next implement all notes that are listed as "side effects" in note SAP note 1101187 .
Finally, generate the plan query again in transaction RSRT. b
Regards,
Marc
SAP NetWeaver RIG

Can we enable Info Objects as input in the Input Ready Query...

Hi Folks,
As I wanted to implement Input Ready Query for Planning in which User has to enter Charactersitc Values apart from Keyfigures.
Per Example:-
Project Number and Budget are Fields in Input ready query. Here user wanted to enter Project Number and Budget values Manually.
Is it possiable, if yes, can you give me your idea how to implement this scanario in IP by creating Aggregation level or Input ready query.
Thanks,
Venkat

Dear Snehith,
Thank you very much for your quick responce, Since Thursday and Friday are weekend holidays for me that is the reason i didn't respond your answer. Sorry for the my delay responce.
In my business case is here only one time selection only not for every row selection.
Before post this i was created One Planning Cube>on top of this i created 4 Aggregations Levels>created Planning Filter with respective aggregation Levels > Created 4 Input Ready Queries with respective 4 aggregation levels>Created one web template>used Tab Strip Container Web item and assign 4 Input ready queries to 4 data providers>Created Variables for Exe Department in Inputready queiry and assigined to Data Providers in WAD.
Now my Web template is asking user input and giving Exe Department values and then entering to out put where user can able to give values and save plan values. But Exe Department characterstic is also displying in Coloum area which should not be displyed in my case. becase of whater characterstics assigned to Dropdown they should not appereard in Coloum area.
How can i do this.? Can you provide your views...
I hope you clear what i am mean here..

Problem when Entering Decimal Values at Input Ready Query

Hi Everyone,
I have created Input ready query but when I am going to enter decimal values in input cell it takes as a round of value.
Example:- If I enter 1.234 value at input cell it takes as a 1 or if I enter 1.789 value then it takes as a 2 at cell.
The technical properties of Key Figure at Info object level is,
Radio Button :- Decimal
Drop Down :- FLTP (Floating Point)
But we want to whatever value will enter at input cell, the same value will save at real time info cube level.
Requirement :- If I enter 1.234 value at input cell it needs to take as a 1.234
Please suggest your comments/views.
Thanks
Kind Regards
Anukul

Hi Giradkar,
Check the setting of the UOM you are using in table 'T006' there are 2 fields that indicate how to display and how to store the values with respective UOM.
Regards,
Eitan.

Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

Restriction data entry for input ready query

Dear All,
I have an input ready query with two structures for rows and columns.
However, I have set one of columns' structure's member as "data can be changed with planning functions", i'm able to enter data for that column. When i execute save function, entered valus are being disapperaed.(not benig written to the cube)
But i want to restrict data entrance for that column. (Like display functionality in BPS)
I know i can protect fields with excel functionality, but we are using web environment.
How can i resolve mentioned issue?
Thanks
Alkan

Hi Bindu,
Thanks for your quich answer.
In web environment, i think i need to use WEB API.
Do i need to write java script? Or is there any particular class to manage the properties of the cells?
BR
Alkan

*****Can we make charcterstics as a Input ready in the input ready query.**

Hi experts,
Our business requirement as follows.
the existing business scenerio is, Master data ( say Product list ) )will comes from CRM , By using the input ready query , we will plan against to that master data by using IP.
But my requiment is " though the master data is not avilable( say new product came into the market which is not avilable in CRM) in the CRM end, user wants to enter the that product name directly in the input ready and also user wants to plan against that product.
As per our requirement , user wants to enter charcterstics directly in the query like entering the key figure values directly in the input ready query.
As per as my knowledge concern , this functionality is not avilable in IP.
so can you please suggest if any other work around solutions for this to fix this issue.
Thanks,
Subhratha benargeee.

Hi Subhrata,
As I said, its not possible in IP at all. If we talk technically, IP infrastructure needs SID's. Meaning it communicates through SID values.
Once you enter characteristic value in the query, the system automatically sends the SID values to OLAP when the round trip happens. There was a certain period of time, when system automatically used to create sid's if there does not exist that value in master data for the characteristic. I dont remember the exact support pack, But that was a bug and has been fixed. Its not possible in any form web, bsp or bex analyzer on OLAP write infrastructure. As long as you dont find some RFC which can write this value to the master data table of the characteristic before the OLAP is triggered.
I understand you are writing transaction data only, But OLAP works through SID's when it gets data from infoproviders. So due to the same reason without an entry into sid and master table of the characteristic there can not exist an entry in the infoprovider. OLAP simply can not communicate without SID's.
Now coming to the scenario I explained earlier, its Business Planning & Simulation. If you design your planning application on BPS, you can design web interfaces which is a BSP application can achieve what I said.
Its not the speciality of BSP(business server pages) which is making it possible, But the BPS interfaces are designed such a way that it communicates directly through master data and text table of charcteristics.
As of now, I do not have a solution for your scenario on IP, If I find or come across one I will surely let you know.
All the best.
Best regards,
ravi.

WAD input ready query with new blank rows

Hi all,
İ need to make an input ready query in wad with new blank rows under report.
in mu query i can see posted values where i need blank rows as well.
i have set number of new rows in analysis item.
what else i should do.
when i run my query, it gives warning that i have no columns that i can enter manually.
Any help?
thanks

Hi,
A few points that you should check:
1) Whether all characteristics of the Aggregation level are restricted to one single value except for characteristics included in the rows;
2) Whether all the characteristics included in the rows are displayed with the Key (with or without text);
3) If you have a Unit characteristic in the row, it still has to be restricted to a single value in the filter.
These are some of the typical reasons why I have encountered the same problem!
Regards
Sriram

Determining Current Month Yr 0CALMONTH automatically in Input Ready Query

Hi,
Is there a standard way of Determining 0CALMONTH in an Input ready query so that when the user enters a line into the Infocube the current Month is stored into the 0CALMONTH field.
Regards,
Arun

Hi.
You can achive this by using characteristics relationship.
Plz refer following [link|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0e3df0c-c370-2910-a696-96f5f38574d7&overridelayout=true].
Regards.

Input ready query error

Dear all,
New to planning world, i have done everything told in the book in query designer to have an input ready query.
When i run that query in query designer, what should i expect?i have no data in the cube, so it says no data found .
However i am trying to make query have blank fields that i can edit with planning data.
any help ?
thanks

You can search for this too :-). Also, for new questions, it is generally better to open new threads.
For saving data, buttons need to be created with relevant commands. If you are executing the query in BI analyser (excel), you can also right click on the query and select 'save data'.

Input ready query with default data

hi expert
How do I make input ready query to have a default value when signing in using WAD?
thanks.

Hi,
Use the following document for your query. If found useful do grant me number!
Revaluating Planning Functions (with Analysis Web Item)
Use
You want to build a planning application with which you can enter turnover amounts for certain account numbers and revaluate them using a factor that can be set. If you select a row of the table, only the amount in this row is to be revaluated. If you do not select any rows, all values are to be revaluated. The planning application is to look roughly as follows on execution:
This example serves in particular to clarify the interaction between a planning function and an Analysis Web item. Special properties here are:
●      Variable handling in the planning function
●      Row selection in the Analysis Web item
Prerequisites
In the planning modeler, you have created an aggregation level that contains the following InfoObjects: unit Currency Key, time characteristics Quarter and Calendar Year, key figure Amount, characteristics Version, Account Number, Cost Center.
The planning function and the query are to use the same data of this aggregation level.
Procedure
Planning Modeler: Creating Planning Functions, Variables, and Filters
       1.      Choose the Planning Functions tab page and create a planning function of the type Revaluate with technical name REVALUATE and description Revaluate for your aggregation level.
       2.      On the To the Parameters tab page, use the input help for the revaluation factor to create the REVAL_FACTOR variable with the Revaluation Factor description. The variable is to be specified in detail as follows: The variable is to be a required variable and is to be input ready; it is to be of type Number, but is not to contain a standard default value.
       3.      Choose the Filter tab page and create a filter with technical name ACCOUNT_FILT and description Revaluation Selection for your aggregation level.
Select the characteristics one after another and choose the input help icon in the column after Characteristic Restrictions. The dialog box for specifying characteristic restriction appears. Specify the required restrictions (in our example, Version = VERSION 1, Quarter = QUARTER 1, Calendar Year = 2007; Cost Center = 100002, Currency = Euro; for Account Number, all values are taken over), choose Add, and save the selections by clicking OK.
Choose Show Extended Settings and ensure that the Version characteristic cannot be changed on execution. (It must be possible to change the Amount key figure).
More information about creating planning functions, variables, and filters: Modeling Planning Scenarios
BEx Query Designer: Creating Queries
       1.      In the BEx Query Designer, create a query Revaluate (technical name: QUERY_REVALUATION) for your aggregation level.
       2.      Drag and drop the ACCOUNT_FILT filter into the Characteristic Restrictions area for filter values. In doing so, all characteristics are restricted to single values.
Drag and drop the Account Number characteristic into the area for default values.
       3.      Specify that the Account Number characteristic is in the rows. The values for this come from the master data.
Specify that the Amount key figure is in the columns. The values for this can be changed; on the Planning tab page, choose the Data Can be Changed Using User Input or Planning Functions option.
       4.      Save your query definition.
BEx Web Application Designer: Creating Web Templates
       1.      In the BEx Web Application Designer, create a Web template with technical name REVALUATION.
       2.      Create the following data providers:
○       DP_PLAN_DATA of the type Query View Data Provider, based on query QUERY_REVALUATION
○       DP_FILT_REVALUATION_FUNCTION of the type Filter. The data binding should come from the ACCOUNT_FILT filter.
       3.      Create the following Web items:
○       INPUT_FIELD_REVALUATION_FACTOR. Specify 10 as the default value (Internal Display ® Text: 10).
○       BUTTON_GROUP_ REVALUATION. Using Internal Display, create pushbutton1 with label Revaluation and, as Action, use the command wizard to assign the following commands (INSTRUCTION):
Table of Commands
Command
Parameters
Data provider-specific command: SET_SELECTION_STATE BY BINDING (Set Filter Values According to Different Sources)
●      Command target: target data provider DP_FILT_REVALUATION_FUNCTION
●      Data binding: selection binding using the Account Number (ZD_ACCNT) characteristic, where the value of the Web Item Selection binding type is to come from the ANALYSIS_ITEM_1 Web item, characteristic Account Number (ZD_ACCNT).
Planning-specific command EXEC_PLANNING_FUNCTION_SIMPLE (Execute Planning Function )
●      Data binding: Reference to data providers of type Filter DP_FILT_REVALUATE_FUNCTION, where the value from variable REVAL_FACTOR of connection type Web Item with Manual Input (ITEM_INPUT) is to come from INPUT_FIELD_REVALUATION_FACTOR.
●      Command-specific parameter: planning function REVALUATE
○       ANALYSIS_ITEM_1. Data provider DP_PLAN_DATA is assigned to the analysis grid as the (source) data provider.
Choose Behavior ® Row Selection ® Multiple (MULTIPLE).
In this case, it must be possible to select multiple rows and to execute the revaluation command on all selected rows. It is not therefore possible to give the command along with the row selection; the command must instead be given using pushbuttons.
       4.      Create a CONTAINER_LAYOUT_ITEM_1 (Web Items ® Enhanced ® Container).
Divide the container into columns, choose the With Tray display option, and enter label Revaluation under Tray Settings.
Add the following Web items to the container:
○       1st row, 1st column: INPUT_FIELD_REVALUATION_FACTOR
1st row, 2nd column BUTTON_GROUP_ REVALUATION
○       2nd row, 1st column (with option Colspan=2, that is, with a merge of columns 1 and 2): ANALYSIS_ITEM_1
The following figure illustrates the layout of the REVALUATION Web template:
Execution on the Web
       1.      Execute the Web template on the Web.
       2.      For testing, extend the URL to include parameter &debug=X.
If you have set this parameter, the selection is shown in the Executing Planning Function section.
       3.      Enter amounts for one or more account numbers, change the revaluation factor if necessary (default value = 10), select the required rows, and choose Revaluation.
For example, enter amount 100 in the first row, retain revaluation factor 10, and choose Revaluation. The query outputs an amount of 110 in both the selected row as well as in the overall result (as long as you have not entered any other values).
Regards,
SUbha

Input ready query text field

Similar Messages

Maybe you are looking for