Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

Similar Messages

Variable "read mode setting" Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query:
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query;
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
Could someone explain me why it doesn't work correctly?
Thank in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

How to set input ready query to display mode and set edit mode in WAD?

when I create A input ready query but not set query propery start query in change mode ,but I want to set this query in input ready mode ,how to set this in WAD?
hope anyone can help me
regard by
wenlong

Hi,
      You can get all the info from this thread , try it out
       WAD - set data entry mode
       Hope it helps.
Regards,
Priya.

How to set input ready query to display mode as default when open workbook?

Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a million

in Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save

Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

ADF 11g - Query Component - How to set default values for search criteria

I have defined a VO with named query (with 2 search criteria). I created a page and drop a query with table. It works just fine until this point. My requirement is to set a default values for the two search criteria. For example, I have release and category criteria where they are set to use a drop down. I would like to default the values for the drop down when the page is shown up the first time and query the result right away. Is there a way declaratively or I have to create a custom query?
Thanks.

I figured this out. Thanks.

How to read and set Pane value for new adding folder

Hi Experts,
I tried to add a new folder in to a system form as below
Itm = form.Items.Add("UserFolder"), SAPbouiCOM.BoFormItemTypes.it_FOLDER)
form.DataSources.UserDataSources.Add("F_new", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 1)
Dim oFolder As SAPbouiCOM.Folder
oFolder.DataBind.SetBound(True, "", "F_new")
oFolder.GroupWith("138")
My quester is what is the panelevel for this new folder? And how to set value to panelevel for this folder.
If we design a folder from Screen Painter, we can set the pane value manually, can we do this from code?
Thanks a lot
Tim

Hello,
You do not have to set any panelevel for your folder, if you would like to display it all the panelevels. (Let's see an example on Item Master data form).
Sales, Purchase, Inventory etc tabs (folders) are always visible, there is no panelevel set for them.
To change between panelevels, you can trigger et item pressed event, and before_action = false, then you may change the panelevel of the form poperly.
For initially you may use the Folder.Select() command to show the default panelevel
>The problem is here, it looks like oFrom.Panelevel property can only accept integer value, so how can I know what's the pane level number for my folder?
Do not set panelevel for your folders, you should drive your form's panelevel based on a selection tree:
To see clear, please check the following code in the help sample: CompexForm
C:Program FilesSAPMásolat - SAP Business One SDKSamplesCOM UIVB.NET07.ComplexForm2003
to make it clear:
        '// Adding Folder items
        For i = 1 To 2
            oItem = oForm.Items.Add("Folder" & i, SAPbouiCOM.BoFormItemTypes.it_FOLDER)
            oItem.Left = (i - 1) * 100
            oItem.Width = 100
            oItem.Top = 6
            oItem.Height = 19
            oFolder = oItem.Specific
            '// set the caption
            oFolder.Caption = "Folder" & i
            oFolder.DataBind.SetBound(True, "", "FolderDS")
            If i = 1 Then
                oFolder.Select()
            Else
                oFolder.GroupWith(("Folder" & i - 1))
            End If
        Next i
This code add 2 folders to the form: and the first (i = 1) is selected.
IN itemevent, the panelevel property of the form is depending from the item you have clicked:
Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
                    '// Check if the event was raised by one of the Folder items
                    '// and change the form's pane level
                    If pVal.ItemUID = "Folder1" Then
                        oForm.PaneLevel = 1
                    End If
                    If pVal.ItemUID = "Folder2" Then
                        oForm.PaneLevel = 2
                    End If
Regards
János

How to set input ready query cell is different color?

Dear All
Hi, everyone, hereby i have a IP question.
i would like to know, how to set the input ready query's cell different color between those cell which is unable to change value one in workbook..?
Example :
For my workbook which have a input ready query,
i have 4 rows for my input ready query report.
For the first row which is not input ready cell and unable to change any value for the cell, then following rows's cell can be change value,
so, i would like to make first row's color cell different with following row's cell.
In additional, all value of cell is initial zero.
therefore, is there any mehtod to make different color between able cell and unable cell?
Thanks a million.
Regards,
WenLong.

Cells in the input ready query result have different styles given by SAP. All rows will have one style, column headings will have one style whereas input ready cells will have one style. If you are in Excel 2003, put cursor in the input ready cell, goto format -> style, you can see one BeX style attached to that cell, apply watever color you want for that style, save the workbook. If you do this for one cell, it will be applied to all the input ready cells by default. In the same way you can give different color to the non input ready cell styles. In Excel 2007, Cell styles are available in Home -> Cell styles. Here you can see all Bex related styles.

How to create an Input Ready Query in Bex Excel with no transact data

Hi
We created a query where we want the user to put in NEW LINES. This query has in general no data when user starts planning.
We have 2 front-ends for this, Bex Web and Excel. Both shows initial 'no data available
BexWeb': Implementing the command set_data_entry_mode we get all the relevant columns for the input
Excel: Command set_data_entry_mode or set_input_mode does not allow the users to insert new lines. Still error message pops up 'no data available'
Do you have a solution for that ?
Regards,
Thomas

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

Input Ready query based on aggregation level

I have an input ready query that reads data from an aggregation level, based on a multiprovider that contains a cube for planning and a cube with real data.
There are two columns of data, two of them for read-only and another for input.
I´m selecting different fiscal year/periods for each column.
The problem is that, when I select fiscal year/periods and the real data cube doesn´t contain any data for this filter, it doesn´t show me a line to input data anyway..
how do I configure the query so that it understands that eventhough I don´t have data for the selected period, I still want to be able to perform the planning?
Thanks,
Cris.

Hi Christina,
Even though there is no Data in the Real time Cube the Query must allow you to Input values. I guess the Query you have designed is not enabled for input yet.
Kindly check the following Points before proceeding.
1. In the Query properties under Planning tab, make sure the Start Query in change mode is turned On.
2. Make sure you have used all of the characteristic in the aggregation level in the Query and is restricted to single value.
3. make sure the columns are Input ready under the Planning tab in its properties
Hope this Helps.
Regards.
Shafi.

Input ready query and display only rows

I am trying to replicate scenario which is equivalent to creating manual layout in SEM-BPS with settings for layout category - Key Figures in Data columns, and rows defined individually. In this version it is possible to restrict certain rows as comparision only.
How can I acheive this using Input ready query? In my query I have created a strucure for Planning Items, but I am not able to show certain planning item selections as display only.
Any thoughts?

Hello Gregor,
Thanks for you answer.
I already have two structures as mentioned by you.
Can you please let me know what exactly you meant by set the input flag on the cell level? What settings I have to change to set the flag, do I have to use any formula? In my example I have three rows for Planning item row structure and I want only one row to be selected as display only row.
Regards,
Sachin

IP: input-ready query shows data in Load mode but not in Plan mode

Hello experts,
we're currently experiencing a very strange issue regarding an input-ready query which consists of a single lead column (read from the cube) and an input-ready plan column. The issue is as follows:
When the cube is in Load mode the lead column shows its data perfectly. However, when switching to Plan mode the data is not shown.
The cube is indexed by a BIA which may be part of the problem.
We're on BW 7.00 SP 21. I've read that this may be related to the OLAP cache, but haven't been able to find any notes relevant for 7.00 SP 21.
Thanks in advance for any suggestions.
Regards, Dirk

Hi Dirk,
I think that the problem comes from the cache used in the plan buffer query. Delete the cache via RSRCACHE. The query name is
IC/!!1IC if you have a query on an aggregation level on an InfoCube IC
MPRO/!!1MPRO if you have a query on an aggregation level on a multiprovider MPRO or directly on the multiprovider MPRO
You might search for note using 'cache' and component pattern BW-BEX-OT*, e.g. 1408959, 1528191, 1560036.
Regards,
Gregor

Input-ready query; Layout dependant on variable value

Hello,
I need to create an input-ready query where I have months Jan-Dec in colums. If the planner gives a variable value for the planning period for example April, he should get a layout where he can plan for April-Dec and view the values for Jan-March. How can I create this kind of input-ready-query? Thanks in advance. Points will be assigned.
Regards,
Marika

Hi Marika,
Step1: You need to create a variable (with user restriction), you can provide fixed values for all months of the year, perhaps on 0CALMONTH. You will get the text displayed when you select the month number in the planning folder where u use it. Say WM1 is the name you gave.
Step2: Create 2 exit variables. 1st one would check the entry by the user from WM1. If the period is > January, store all the months starting from January to the month preceeding to one selected in WM1. Set this as WM2.
In the second exit variable, the code must check for which month user has selected to start planning from and store all months starting from and ending December in it. Set this as WM3. You will have to create these 2 variables on 0CALMONTH again.
Step3: Now, in the Layout builder, 1st screen, for the additional settings, in the data columns tab, select 0CALMONTH for dynamic.
Step4: In the second screen of Layout builder, create 2 rows for the data column settings. First row would be set for comparison. Check dynamic box. Assign WM2 as the variable for 0CALMONTH here.
Second row would be for planning, but check dynamic box here again and assign WM3 as the variable for 0CALMONTH here.
You must be having WM1 as the variable in header.
In the 3rd screen you will find just 2 data columns displayed.
When you run the layout, user prompt will insist you input the desired month and layout on further opening, will bring in the desired data as you require from the Cube.
I hope you have ur actuals and plan data both in the same cube. Else you have to assign separate cubes for plng area in comparison and plan settings in the 2nd screen of builder.
Hope this will help solve ur problem.
Regards,
Aby

WAD template for INPUT READY Query

Gurus,
I have created a real time cube and did al steps correctly in terms of Input ready Query Design. ( Set the Query to Change Mode , changed Key figures to accept Data from Users and Plan functions).
I get the out put in read only mode . I mean the key figures does not allow me to plan .
I am clueless as I seem to do all correclty. We are on latest Service pack .
I discovered we are uisng the webtemplate 0ANALYSIS_PATTERN . DOes this need to be changed?
ANy suggestions please ....

Hi,
Suggest check if you are able to enter data using the input enabled query in BEx just to make sure that the query is correctly developed.

How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Similar Messages

Maybe you are looking for