Input settings Change when I Stop recording

I got this issue since a long time, and its very weird...I select an input, i start recording, I stop..then the input changes suddenly..Any Hint?
Thanks

re: Apple reading this forum....
"never heard of that happening before either "
LOL!
For what it's worth, I just experienced a very similar issue, but mine was mono. input 2 would switch to input 1 after I was done recording.....don't know what to tell you.
X

Similar Messages

Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?

Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?
It's a dean markley acoustic pick up with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.

Watts100woo wrote:
with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.
you appear to already know the answer, however...
GB is not recording it in stereo, nor could it
the short story:
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)
the long story:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqstereovsmono
(Let the page FULLY load. The link to your answer is at the top of your screen)

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

When I stop recording, tracks delete themselves

They'll be red and recording, but then when I hit stop, it disappears. I'm recording multiple tracks.

Are you recording the instruments to the right kind of tracks? This problem is very typical for trying to record an audio input signal to a software instrument track. Then the recorded region will simply vanish, when you stop recording.
What is your GarageBand version?

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

Settings changing when adding to another movie

Each time I attach a new chapter (mini movie) PROJECT to the already existing main movie PROJECT the settings change. I have tried adding on the front with the new chapter as well as trying to add the main movie to the mini movie. Is there a way to lock all settings on a movie so when it is added to another movie the setting won't change oon either clip. The chapter movie is approximately 1 1/2 minutes long and the main clip is approximately 9 Minutes long. There are several transitions, and scrolls included in both clips.
Message was edited by: jimfromdenver

Hi Luis, thanks for the reply. I first made a video approximately 8 minutes long. I used digitized video, still images, sound tracks, titles and numerous transitions between the clips. I then opened a new project and made a movie of one of the last letters sent home by the veteran prior to his death. I also used transitions, movie clips, titles and various images. So far I have three of these last letters completed. I was able to copy and pasted two of the letter clips in front of the main generic movie. However, when I attempted to paste the third clip at the beginning of the main movie and two letters - it causes some of the titles, scrolls to overlap.

Screen color settings changes when certain software is launched.

Since today I noticed the screen color settings of my Macbook Pro 17" (beginning 2011 model — Running OSX 10.8.4) is changing when certain software is launched. In this case, Indesign CS6.0 gives a strange blue hue over my screen, but when I check my screen color settings, nothing has changed, everything is set the same as when I don't run the softwares that change my screen color settings. I don't recall changing any settings that could have triggered this action. I didn't change any settings in Indesign CS6.0. I do regularly use CleanMyMac 2 to clean out my computer, maybe this has changed some settings? How can I change this back to normal? Google didn't help me neither.

Ah right, don;t use laptops much and always forget about that one, good catch. Switching graphics cards would definitely have an effect.
Just remember with that unchecked you will decrease battery run time so you might want to switch it back on when you are not doing graphics and you are on battery.
regards

My settings change when I change sim card?

Hi,
I am going to go to Croatia for a holiday. I would like to buy there some prepaid sim-card. Does Blackberry's settings will change or it would be all the same when I will change simicard?
Solved!
Go to Solution.

Hi and Welcome to the Community!
Nothing should change when you do this. With legacy BB devices, there could be some changes...but with BB10, nothing should change.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Printer Settings change when switching between printers

First time in the forum, so please be gentle. I know little about Adobe.
I am working with Windows XP (SP 2) machines (I know - should be at least on Windows 7, but can't change what my company has) and have Adobe Reader 8.1.2. We have run into a "bug" of sorts.
Many of our locations (these are PCs all off-site) print labels (pdfs) with a Zebra brand printer where the labels are 2.25 by 4.00 inches. The Zebra printers are always attached directly to the PCs where they create these labels. Sometimes, they want to send the labels to a Lexmark printer that is attached at a Primary Server elsewhere. When they do that, they make sure to choose "Fit To Printable Area" under Page Scaling when the Print Box comes up so that the 2.25x4.00 label is enlarged to fit on 8.5x11 inch paper. The problem we run into is that right now, the default settings for these Zebra printers is 2x3 inches and Portrait. We need them to be 2.25x4 and Landscape. The user makes those settings changes and saves them and it used to be those settings hold once they save them. We also have to change our Lexmark settings to "Letter - 8.5x11", otherwise it defaults to "Custom-4.88x21". Recently, there's been this bug where if they save the settings for Zebra, print something, it's fine. They switch to Lexmark, print to it with "Fit to Printable Area" it's also fine. When they go back to the Zebra printer, suddenly the saved settings are gone and it's back to default.
This also is happening in the reverse - if the user usually uses the Lexmark, but switches once to the Zebra, then back to the Lexmark, the settings have defaulted again. Someone here said they remember seeing something like this before in regards to Adobe Reader. Does anyone have any ideas?
PS - I am creating a new image which will have the correct default settings for our needs so that hopefully this will not be an issue in the future.

Hi BigRedEO,
Thank you for posting on the forums. This seems more like a printer issue as it is not retaining the settings.
Kindly try updating the drivers for the printer and check.
Thanks,
Vikrantt Singh

Security settings change when rendered from third party Windows 2008 R2 server

We created a fillable PDF form in Adobe Acrobat and made it Reader extended. Opening the form on a local hard drive the security settings show that Signing: is Allowed. We can sign documents in the form with a signature pad.
After we upload it to a third party Windows server 2008 R2, and we later go to access the form, the server renders it back to us in Adobe Reader. We are unable to digitally sign documents in the form with a Topaz signature pad. We notice that although the form was originally created with the form being Reader extended the security settings change to Signing: Not Allowed.
How can we get the server to render the document back to us where we can digitally sign documents in the form?

The second file still shows the extended rights header is present (it's warning you about restrictions at the top of the dialog while also reporting the method is "no security") but the digital signature which grants those extended rights will be invalidated if *anything* in the file structure is changed. I suspect in this case that the server software is doing something to your file; it may be trivial such as adding an XMP tag, but it's enough to break the hash check.

Input language changes when searching

samsung galaxy s2
android 4.1.2
firefox 21
when searching using the address bar
changing input language to hebrew
enter characters
at some point usualy after tapping space the input language is changed back to english
thanx

Did you change the '''Character encoding'''?
Firefox Menu > Settings > Content > Character Encoding
*Choose > Show Menu
Firefox Menu > Character Encoding
*Choose > Unicode (UTF-8)
Firefox Menu > Settings > Content > Character Encoding
*Choose >Don't Show Menu

How to make signature field work for reader users? Security settings change when doc is extended???

I've been struggling to correct a problem all week and am at my wits end. Customer service was no help as the person I spoke with could barely speak english let alone understand the problem as I explained it to him. Hoping someone here can provide some insight, here's the issue:
I'm using a Windows 7 Professional OS. I created a Microsoft Word doc and used Adobe Acrobat XI Standard to create a form from it. It automatically detected the fields, which includes a signature field. I went through fixed it all up how it needed to be and did "save as other - reader extended pdf - enable forms fill in & save in reader".
The document is a report that will be sent to a small number of people that have to fill it out, digitally sign and return and I'm assuming that most if not all of them will open the document using the free Adobe Reader. So I thought extending it is what I needed to do to make sure they could fill it out, save it to their computer if need be, and also sign digitally. The signature field was automatically added in by acrobat for me and I did not change the properties of it at all except to add a border.
When I open the form in Reader (also XI) I can fill out all the fields, save it... but not sign it. The security settings say signing is not allowed even though I went back to the original pdf form and the security settings on it say allowed for everything. I don't know how to fix this... please help!!!
I've attached some screen shots but can include more if needed...

I don't have the Enable More Tools option under Reader Extended PDF. I just tried to download the XI Pro trial version and it won't complete installation because of the standard version I already have. Any advice or workarounds you know of? Going to the boss for $$ to upgrade to Pro is what I'll consider my last resort if the issue is truly that I have to use Pro to enable more tools for reader.... I appreciate your reply though. I sat here all day yesterday fingers crossed that SOMEONE would give it a go!

Lost recording when I stopped recording

I'm recording my shows multi-track with my macbook pro running Lion using logic Pro 9 and a Tascam sound card. Will recording the first set, everything was fine.I pressed space bar to stop so I wouldn't record between sets. When I came back and pressed record, I lost all sounds in all tracks and a straight line appeared. What happened and can I get my work back…?

Thank you, SteveG -- I had tried that and it didn't work; tried it
again, it worked. You're a genius.
On Mon, Jan 20, 2014 at 4:12 PM, SteveG(AudioMasters) <

Microphone settings change when switching between a

Hi all,?After much fun trying to get my mic working with my Xfi Elite Pro i am now having problems with the sound properties changing the settings when i switch between ap
ps.
If i sit with the audio properties open and set the mic to the line in 2/mic port it works, then if i fire up skype, msn, guild wars, bf2 or any other app in which i want to use the mic the setting switches back to the "microphone", i then have to minimise the app and force the setting back again.How can i get this setting to be permanently set to line in 2/mic?HELP!!

Some applications will do this, check out this thread for a little tool that might be of some use to you:
http://forums.creative.com/creativel...ssage.id=44236
Cat

View Settings change when message is selected

When I select a message to view all of the other messages's view order changes. I go to VIEW in toolbar and the SORT BY selection has changed from ORDER RECEIVED to SUBJECT and the order has changed from DESENDING to ASCENDING. This happens about every time I go to INBOX. What do I have to do to keep the settings permanent?

are you perhaps clicking on the column headings instead of the actual mail item? clicking a heading sorts by that item and clicking again reverses the sort.

Input settings Change when I Stop recording

Similar Messages

Maybe you are looking for