INPUT SOUND PROBLEM

HI...
I am using compaq presario notebook laptop CQ43-300TU , Serial number: {Personal Information Removed}, Product number: QG455PA#ACJ IN Windows 7 Ultimate 32-bit ...,
I AM FACING PROBLEM FROM INPUT AUDIO RECOGNITION...MY LAPTOP IS NOT ABLE TO HEAR MY VOICE...WHENEVER I USED TO VIDEO CONFERENCE WITH OTHERS...I AM NOT ABLE TO SEND MY VOICE TO THE RECIEPIENT...BUT I CAN LISTEN THEM VERY WELL...
please problem best solution for it.
Thanks
Regards
NITESH KUMAR

Hi NITESH1960,
With the issue of not being able to be heard from the internal microphone of your computer, I have included the document 'Resolving Microphone and Line-in Problems (Windows 7)'. Please follow through the troubleshooting steps in order for the best results.
To clarify as well all Windows updates have been completed? Have you tried using an external microphone? If, so does it work?
If the above steps fail to resolve the issue, or you need more specific steps, please provide me with the full model number of your notebook. I have included the document 'Guide to finding your product number'.
Thank you.
I worked on behalf of HP

Similar Messages

Sound Problem Plus Memory Problem

I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
Windows 7 64 bit Home Edition
EVGA P55 FTW Intel P55 Socket LGA56
Intel Core i5-750 2.66Ghz 8M LGA56 CPU
Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
Ultra LSP750 750w Power Supply
Seagate TB Serial ATA HD 7200/32MB
Cooler Master HAF 932 Full Tower Black Case
Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
PROBLEM ONE:
This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
PROBLEM TWO:
The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
ps.
This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

Hello,
cannot help with the sound problem.
For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
Make a clear cmos. Then boot the computer with only one stick of ram in the port .
If everything is fine, turn off and add the other port of the same color for dual channel.
If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

Sound problem with my iPod touch! Need urgent help!

I have an iPod Touch 8gb 3rd gen (2nd gen) and have owned it for a couple years. Recently I've been noticing some sound problems when I listen to music with earbuds/headphones. One of the earbuds will lose sound and won't produce music but if I twist the input plug it produce little or full sound but if it moves out of a certain position it won't produce sound out of that bud. I'm using Skullcandy Ink'd earbuds so I thought maybe since they arn't great it might be a manufacturer defect but I used them with my iPod Nano 2gb 1st gen and I could hear out of both earbuds perfectly. I even plugged in my iPod Touch into a car adapter so I could listen to my music through the car stereo and it went in and out of sound so I realize now it is my iPod and not 3rd party equipment I've been using with it that is the problem. Since its the iPod what is the exact problem and how do I fix it? I really don't want to use my old iPod since it doesn't have enough storage for my music now and I'm already getting something else for Christmas that I've been wanting for a while. Please help!

If your car adapter works thru the headphone jack, the problem could just be dirt inside the jack.
Try just putting in and out the headphone plug a few times. You can also try cleaning the jack, just don't use anything wet. Cotton swabs are also not advisable as they might leave lint and make things worse.
To make sure it's not a oft ware issue, try to Reset your device.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

Massive sound problems in Yosemite

Hi,
I have been experiencing massive sound problems with Yosemite. It basically effects everything except the sound control in the control centre.
What happens:
I can't control the sound volume anymore. Key board sound control does not respond (sound symbol is struck out), sound bar in menu bar in greyed out.
If sound symbols are not greyed out, the sound will stay on the level it currently is. Neither key board nor menu bar icon can change the volume.
When it happens:
When I plug/un-plug headphones.
When I use iTunes. iTunes will even stop playback... the only chance to get iTunes back to normal is restarting the app.
When I use Skype.
Occasionally on any incident... there is no app in particular linked to this.
What I do to get around it:
Restarting the mac... this will help until I sent my Mac to sleep or do any of the things above.
Accessing sound control via the control centre (which is work around, yet very annoying).
Killing sound via terminal does not do anything.
Btw. there is only one thing listed in the sound input/output menu.
This problem is very annoying and occurs several times daily, especially since I work a lot with sound and music. I know this an weary argument, but considering what I paid for this machine ... bla bla bla... I need a fix.
Thanks for any advice.
Andy

Hi,
Thanks for your reply.
Yes, I have. It works pretty much like any re-start does. As soon I use headphones or send my Mac to sleep, it goes back to unresponsive sound control.
Edit: Just tried it again and it didn't do anything. Key board sound control is still greyed out...
Any other suggestions?

Inspire 5.1 P5800 Sound problem...

Hello Everyone
I have a Sound problem with my 5.1 speaker system. When I turn it on,(playing music or not)I hear a terrible loud/high background noise, like a constant interferance. It's a very unpleasant sound. The noise come from all satelites speaker(Speacially the center speaker.)
I'm sure that all conections is ok.
Please help me to solve this problem.
PD.: If it's help I have a Compaq Presario SR602LS Desktop PC.

1 Identify which component causes it; plug headphones to your computer to see if that has noise, try all three connections. Then, connect all speaker inputs to a different source, like a mp3-player.
2 If both are noise-free, it has to be some kind of interference. The cables to the satellites are coaxial so they are not likely to be the cause, but the 3,5mm jacks to the sub might be. To find out if they are, try moving your sub around your room to see if the noise changes (both decrease or increase).
3 If the problem cannot be traced to either or 2, it might be a groundloop: that the signal fed from, for instance, your computer, to the ground connection of your electricity-plug is picked up by your speaker set. To check this, try connecting your set to a different electrical group or at least a different plug.
In case 1: if it's the pc, try grounding it if it's not already. If it's the speakerset it will not be so easy to solve.
In case 2: see if you can connect the sub to your pc using coaxial wires (or perhaps even optical, I am not familiar with the set), you might need some 3,5mm-to-RCA-plugs for that, or if you can somehow shield the inputcables by wrapping it in aluminum-foil or anything.

Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM) Options

I have been trying for 3 days to fix this issue & I even had Bicrosft tech support on line remote PC acces take control of my PC, and still can't get the sound to work!
Does any one know how to fix this issue? DEFINITIVELY?
IDT High Definition Audio CODEC (NO SOUND PROBLEM)
‎03-20-2013 05:24 AM
My PC info is:
Manufacture: Hewlett-Packard
Model: HP EliteBook 8460p
Rating: 5.3 Windows Experience Index
Processor: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz 2.50GHz
Installed memory (RAM): 4.00 GB (2.98 GB usable)
System type: 64-bit Operating System
Pen and Touch: No Pen or Touch Input is available for this Display
Windows 7 Professional
Product ID: 00371-OEM-8992671-00008
Problem: I was watching a movie a night before, and I muted and forgot to turn off my laptop, today I found out the sound did not work, so I tried restarting and still no hope, i tried disabling and enabling the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly, but oviously its not I really need help, I dont know anything advanced about technology yet, so im helpless.
T
Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
‎03-20-2013 05:28 AM
I also tried leaving the Laptop to cooldown for about 3 hours and still no sound.
DavidPK
Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
s
‎03-20-2013 05:40 AM
Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
ftp://ftp.hp.com/pub/softpaq/sp59001-59500/sp59291.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow thisand then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Start the notebook and let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K

Hello DesertWildcat,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having and issue with your HP EliteBook 8460p's audio not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Sound Problems using Windows Vista.

Hello everybody!
I have a problem with the sound in Windows Vista with my iMac. I install BootCamp Drivers (last version) and the sound system works with this drivers, but, when it's playing music, I always listen to a very strong noise. I don't have any microphone active (actually I desactivate all about input sound in control panel, to considerate where is the problem)
So, please, Can someone help me?
Thank you so much...
Rafa
Madrid, SPAIN

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP & Vista.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP or Vista, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

Input sound

Hi
I have a problem with the input sound I can't hear anything.

are you using the internal microphone?

SB X-Fi Titanium and SPDIF Optical input: no input sound

I'm attempting to use my SPDIF Optical input for the first time on my Windows 7 PC. Audio input works fine. No sound appears to be coming in through the optical input. Sound Properties in Control Panel shows everything is OK.
I am using a Converter box to convert a Coax optical output of my Boss GT-6 Guitar efx unit into a Toslink cable input. Everything is plugged in correctly. So assuming that the converter box and cable are doing their job, what subtle issue should I be looking for regarding input sound on the SB card? Everything looks OK, but still no sound.
I do get a low-level hum from my speakers when I turn on my GT-6 and it goes away when the GT-6 is powered off. At least something is being detected. I'm unclear how to proceed troubleshooting this
Thanks for any assistance...Mark

I've been going through the same headaches with my extreme gamer. I wanted the quality of an optical connection and was impressed with the improved clarity and gain, but as frustrated that no 5. seemed possible on anything other then dvd's.
A extreme GAMER card should have GAME support one would think. Then I read about the Dolby Digital Li've Pack, avalible here at the web site, For a fee of course ^&%$&(.
It convert ALL sound from your card, even stereo if you use the CMSS-3D settings, to Dolby so any reciever can now decode them via an optical cable.
The only issue I'm having is that with Dolby Digital Li've enabled I'm getting a few millisecond delay that is slightly throwing off the lip syncing while playing video, I can't seem to find out why, with the DDL unticked the delay is gone, but so is the 5..
I'm not sure if it is because the DDL works in real-time and that causes the slight delay, or not. It isn't a huge problem just a annoying one.
It seems that Creative sucks at digital, lol. Or just doesn't care very much about it.

I have sound problem in My Cq40-144TU Laptop

Hi,
I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing.
But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
Please help me sir

What sound problem - no sound on anything, no sound on some apps ?
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
And for future info typing in all capitals is considered to be SHOUTING

Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
I thought that was odd...but then the problems really started.....
After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
(and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

HT3983 i have a sound problem when i install windows 7 32 bit on my imac

i have a sound problem when i install windows 7 32 bit on my imac

Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
Hope it helps.
Regards,
Waseem,
I work for HP.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Any resolution to the sound problem?

I have been having the same sound problem with my Mid 2010 Mac Pro tower ever since I got it. I have been in touch with Apple and have been told that they are familiar with the problem, but that they are still working on a fix. The problem is that I have external speakers, and every time I shut down and then start up again, I have to go to preferences and physically change the sound output to go to the speakers. I have also been tole that the Mac is supposed to sense the external speakers and go directly to them.
Is there anybody else out there with this problem, and has been able to resolve it?
Thank you.

I have a 2010 Mac Pro and use the stereo line out jack in the back of my machine for my speakers with no problem. I don't recall any problems setting it up. But check the Audio MIDI Setup (in your utilities folder) to see if you can set it from there (should be able to). Not sure why the preference wouldn't stick. And I don't believe there is automatic detection of an attached sound output device where the sound preference switches to that (unless maybe the front jack which I never use).

INPUT SOUND PROBLEM

Similar Messages

Maybe you are looking for