Input specs for new pouch and nano

I have a question regarding the new record app that has finally arrived on the touch and the nano. Does anybody know what quality the recordings are? Are the usable for radio interviews is it more like the mic from Belkon that is ok for simple notes.

Well if the new Touch does support voice memos then someone should tell Apple. I just downloaded the manuals for the new Touch and new Nanos and whereas the nano manual includes a section on voice memo recording there is no mention of voice or memo or recording in the manual for the new Touch!!!!
What gives?

Similar Messages

Power input specs for the zen x

i need to know the power input specs for the zen xtra, since i need to buy a new charger ASAP. Can anyone help me?

You might want to ask this in the MacBook Pro forums… you're in the MacBook forums.

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

How do I turn on my wireless keyboard and make it 'discoverable'? I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!

Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

Create Separate Views for New,Edit and Display forms in Infopath

Hi,
I need to create a separate views for New, Edit and Display forms in infopath.
For ex : I need a Submit Button on Display form and not in New/Edit forms.
I tried, but i amnot able to get the changes.
Regards, Shreyas R S

I just validated my approach in a 2013 farm, this is precisely how it's done!
Step 1) List > Display Form
Step 2) Change the View within the Web Part Properties. In your screenshot it looks like you simply went to View Item on the single item, which is not the direction I gave =P.
**Assuming you've already created the multiple views within InfoPath, this allows you to set them up as distinct defaults for New, Edit and Display, let's make that clear. If you are not even to the point of having separate views, that is just in InfoPath,
Page Design tab, far left, New View button

F.Spec for new excise invoice format development

Dear Friends
Can anyone pls tell, what are the details/info to be included for drafting an F.Spec,required for new excise invoice development?
The new format is given in an XL sheet. Any guidance on how to prepare an FSpec for the same?
Any guidance/help will surely be appreciated.
Rgds
Sumanth.G

Dear Sumanth,
As part of creating a FS, you have to do the following steps.
1) List of details to be printed (you can get the same from the XLS heading)
2) Now you might have already reached a conclusion as to whether you are going to print excise invoice in J1IP or
any Z transaction.
3) Based on the above choice,your ABAP-er will be doing the SMARTFORM or SCRIPT.
4) All you have to do is to write down a logic to fetch the required details to be printed , based on the input.
Assuming your input will be the excise invoice number, and you need to print the details of the corresponding delivery/invoice/item/price/qty/ etc..
You can get the same from tables related to excise ( J_1IEXCHDR
J_1IEXCDTL )
The REF DOC1/ REF DOC2 will provide the details of the Billing.
Now more details on the billing can be got from VBRK/VBRP
If you need the details of delivery , you can make use of table VBFA and input your invoice number as subsequent document and get delivery number (type=j) which is the preceding document.
Now more details on delivery can be got from tables LIKP/LIPS.
Hence kindly understand what are the details to be displayed.
If there is any trouble in writing the logic, kindly revert back.
Thanks & Regards,
Hegal K Charles

Correct ITunes version for Windows 2000 and Nano

My daughter just got a Nano for x-mas and is not recognized by old I-tunes software. I assume I need a newer version. However, 8.x that is advertised as latest version does not mention Windows 2000. I can't find any info on what version of ITunes I need or if there is one even compatible with both 2000 and the Nano. Can anyone tell me? I am incredibly frustrated by the lack of info on this and the lack of info in the user's manual. I see there are several different versions/generations of Nano, but have no idea how I am supposed to know what I have. I am not computer illiterate, but find this site poor at explaining questions like; how to tell what generation of Nano one owns, what version of I Tunes is necessary to synch with that version of Nanao, and is that version of ITunes compatible with ones operating system.
Can someone tell me what version of ITUNES I need (or if it is even possible)and where I can find it? Thank you if anyone can provide this info that Apple chooses not to make easily accessible.

So does this mean the IPOD is useless unless I get a whole new operating system so I can get the latest ITUNES?
I also found a fact sheet about what to do to re-install USB drivers if the IPOD isn't recognized by the computer (which it isn't), followed the instructions and it still is not recognized! Is there a place those drivers can be downloaded so I could try something other than ITUNES for putting music on?
I still contend that MAC does a horrible job of explaining these issues to people when they are buying. I've spent about 4 hours looking at help pages and have yet to see one that mentions minimum system requirements (ie Windows 2000 is not supported) and what, if anything can be done about it. I spent about a half hour trying to locate an e-mail help/customer service address to ask these questions and let them know about my frustration, but all I could find was the phone number, for which I only get one call! I don't have time to spend this much time trying to track this info down. My first computer was a MAC and talked for years about how great they were, but this lack of easy access to basic info/customer service has soured me on them. Sorry about the rant. Thanks for any help. While I am not a computer nerd, I work with them enough to know how to get around.

Specs for new iMac for X

Looking to do full upgrade and get a new iMac and also FCPX. Would this computer serve me well? Any quick thoughts would be appreciated.
Still on FCP 6 and an old Macbook Pro, but taking the plunge next week.... Thanks for any advice!
3.4GHz Intel Core i5 Quad-Core (Haswell)
8GB of 1600Hz DDR3 RAM
1TB 7200rpm Hard Drive
NVIDIA GeForce GTX 775M Graphics (2GB)
27" LED-Backlit IPS Display
2560 x 1440 Native Resolution
Thunderbolt, USB 3.0, SDXC Card Reader
Includes Mac OS X 10.10 or OS X 10.9

If you can, bump up the RAM to 16GB. Otherwise the spec looks good for FCPX.
http://www.apple.com/final-cut-pro/specs/

Power input specs for MacBook Pro

Anyone know if Apple have (or are going to) released information on the actual power input requirements for the MacBook Pro ? I specifically mean for the machine, NOT it's AC adapter.
They came tantalisingly close for the 17" PowerBook with this :
http://developer.apple.com/qa/qa2001/qa1266.html
I suspect the answer is going to be NO, if so then I would suggest they reconsider their policy - making up new proprietry connectors and restricting the supply of third party products like this is really having an effect on their image. People DO notice this sort of thing, and suggest they've been taking lessons from Microsoft in how to restrict people/force them to buy more than they intended.
Given that I've a box full of dead Apple supplies for PowerBooks, some of which have already been repaired and given a second life, then I'd rather put off buying a MacBook until I know I can either make, buy, or adapt a third party supply (at a reasonable cost). I'm powering my PowerBoook now off a third party supply that seems better built and was half the price of an Apple supply. Plus I need three, one to live under the desk at home, another to live under the desk at work, and a third to go around in my case - it makes life so much easier. I've no intention of shelling out for three extra Apple supplies (two extras and a spare for WHEN one packs in).

You might want to ask this in the MacBook Pro forums… you're in the MacBook forums.

OSX requirements for new 7th gen Nano?

I bought a new iPod Nano using the the system requirements listed on Apples home page as a guide. It states 'OSX10.6.8 or later' and 'iTunes 10.7 or later'.
I have an older iMac and can not upgrade my OS past 10.6.8. I also have iTunes 11.4 and don't think I can go any higher with iTunes & OSX 10.6.8
The potential problem is in the Apple Nano manual. In system requirements is states 'OSX10.7.5 or later' and "iTunes 12.1.1 or later'
I spoke with Apple tech today and they said the manual was new (Sept. 2014) and they list higher OSX and iTunes system requirements but only because it was a newer manual??? WHAT!
If the Nano STILL only requires OSX 10.6.8 or higher then why does it now list a newer OX10.7.5? The person in Apple support could not answer that question. She thought it should work, but it will be rather difficult to return to Best Buy after removing the OEM packaging and trying to transfer music from iTunes on my iMac.
I know this iMac is getting old and will replace it at some point with a new OS, but don't want to buy a new computer just to load music onto a $150 music player!

Thanks, deggie.........
I did use the Apple online store for my info and based my buying decision on this info, correct or not. I then got into the manual to get familiar with the Nano features and saw these conflicting minimum requirements for both OSX as well as iTunes versions.
I bought it from Best Buy, not the Apple store, and I have a feeling they might not be as easy to deal with for a return of a open / used iPod Nano that didn't work for me.
Hopefully the Apple Stores info is accurate and I will have no OSX or iTunes issues.
If anyone IS using OSX 10.6.8 & iTunes 11.4 with their 7th gen Nano I'd love to hear that!

Computer specs for crafting Videos and Sanyo Xaxti camera

I have been battling computers and a "big box store" for 3 months now. All computers are have been under warranty so I am on my third machine:
Now I have my third machine and I was told I needed to purchase all new software so with that I upgraded to PsE & PE 10. PE 10 works just fine - as far as I can tell. On my old machine - PsE lagged - but I knew that when I purchased it.
This machine and the one previous, were replacements and I was told that these would "more than run" my programs.
Asus
2nd Gen Intel® Core™ i5-2450M processor;
Intel® Core™ i5 processor
Intel® Turbo Boost Technology
6GB DDR3 memory; expandable to 8GB.
750GB hard drive (5400 rpm).
UMA graphics
For lush images and vivid detail. HDMI output for flexible connectivity options.
Microsoft Windows 7 Home Premium 64-bit operating system preinstalled
Sooooo, then I stumble upon this thread http://forums.adobe.com/message/4287391#4287391 only to find that my camera poses an issue as well
If all of my software is oudated then it stands to reason my camera is too?
I have a Sanyo Xacti VPC-CG10
HD-SHQ: 1280 x 720 (30 fps/ 9Mbps)
Videos: ISO standard MPEG-4 AVC/H.264 (.MP4)
Audio: 48kHZ sampling, 16bit, 2ch, AAC
http://sanyo.com/xacti/english/products/vpc_cg10/spec.html
Basically I have the same issues as I have had before but slightly different. Before I had hours to wait for rendering - now I have no redering issues at all, and with my old machine and programs it lagged quite a bit. PsE10 also tells me if my videos that I am importing need different settings which is nice.
When I edit for long periods of time PsE10 wants to quit on me. Sometimes it decides to give me these white vertical bars or lines then if I just click over to something else, when I come back, they are gone (like in the second photo)
Sometimes I also get what I call "confetti" from previous pages - but this is not just in PsE it is in Office 2010 and even on the internet. I have more than likely been in PsE10 prior to each external incident happening.
So, today, I took the same raw video, edited in Movie Maker (never have an issue there - just limited); saved the files; imported into PsE10 and now I don't seem to have any issues - so far. I don't even have lag time which does not bother me since I have dealt with that issue for years
All of this for this question - and "no" - I will not trade in for a desktop machine (already have one - this one is portable and I take it with me so I can work)
Would adding 2 g RAM to this machine solve some of the "white lines" and "confetti" issues I get? Also, from what I have read here, am I correct in assuming my video camera is out of date?
Thanks guys!
(Tammy aka PKGlitz)
Just talked with my husband and he made a good point, all of these hand held cameras were probably designed to take video, edit on screen, and then upload to YouTube or blog. Is that a correct assumption?

When you start your Premiere Elements project, do you select the project settings for AVCHD Lite?
If that doesn't work, try the settings for Flip Mino HD.
Unfortunately, the Xacti is not well supported by Premiere Elements, which is probably at the root of your problems. But, if you're sure you've got the latest version of Quicktime and you're using the best possible project settings, you should be okay with that computer.
Just makes sure to go to either the nVidia or ATI site and get the latest drivers for your graphics card. And go to Windows Update and ensure you have even the non-critical updates for Windows. You may also want to swap Microsoft Security Essentials for your current antivirus and remove any Norton software. Security Essentials is very efficient and non-intrusive -- it's also free, of course, and at least as good as any antivirus out there.
And, for good measure, run a Deep Care tune-up with Advanced System Care Free.
http://www.iobit.com/advancedsystemcareper.html
The weakest link in the chain seems to be your hard drive. It's only 5400 rpm -- which is rather slow for today's computers. Is this a laptop, by any chance? Laptops are usually built for portability, not speed, so slower hard drives are pretty common with them.

I want the cursor to be in the address bar when creating a new window; it works for new tabs and in a new private window, but not in safe mode.

I have tried following the advice offered in the few different threads I have found on this but nothing fixes it. I want the cursor to be in the address bar when I open a new window and/or when firefox opens without restoring a previous session. I fixed the issue for new tabs via about:config but this doesn't work for new windows. I tried safe mode and the problem persists. In new private windows the cursor is in the address bar.

The search box in about:home steals the cursor. Changing your home page to something else will cause the cursor to start in the address bar for new windows.

"more info" in Get Info showing "--" instead of actual infos for newer videos and images

I've just noticed that when I click on "Get Info" on my newer pictures and videos, the "more info" section is now showing "--" instead of the dimensions of the images and videos. However when I go to my older files, the info is showing. Also if I search any of the newer files (those with the missing info) in Spotlight, it doesn't show up. I've done some research and some people suggest reindexing Spotlight, but that never worked for me. In fact, even if I exclude a folder in my Privacy list, it's still showing as a result when I search them. I'm sure this is a problem with Spotlight as it stores the dimensions info, but since reindexing it is not a solution, can it be solved in some other way?

It takes time on newer things, but might have to be opened first or something.
If you want, you can clear the caches with OnyX (#12) and that would rebuild and repair the entire sub-system.
..Step by Step to fix your Mac
Mac maintainence steps

Suggestions for new features and improvements for Garageband

Hi,
I posted this to iCompositions but don't know who would be exposed to it as far as Apple goes. Just thought I would list a sort of wish list for GB that would make a huge difference for me.
Most are just basic interface improvements and changes. Some you may already be able to do and I'm unaware.
1. A click track option would be nice.
2. A space to write production notes as in guitar used and pickup used.
3. A Telecaster and Strat icon for the track icons.
4. When you duplicate a track it also duplicates the region(s) of the track.
5. An edit (highlight) button on a region to mark where editing needs to happen. This could be saved for future reference and quick navigation to.
6. More control over the loop button on tracks. If you want to move it to another section it ***** to get at both ends and drag it to where it needs to be.
7. Audio Interface volume booster. I don't get the same input from my M-Audio Ozone as I do via input of my guitar through a direct box. Not even close. Maybe it's my interface?
8. More than one effect(s) on the same track.
This is my wish list.
ej
G5 Mac OS X (10.4.9) PowerPC G5 Dual 2 GHz 1GB SDRAM

First of all, if you want Apple to listen to your suggestions, you better use the feedback forms, since this is a user forum and is very rarely visited by Apple employees.
As for your list: People in this forum have put together a huge wishlist which somehow differs from yours (see this thread, for example). Top of the list are midi export, variable tempo and volume and effect automation.
As for your no.8:
8. More than one effect(s) on the same track.
You can have up to 4 effects on each track (plus the not very effective compression slider), 2 of them are restricted to echo and reverb.

Input specs for new pouch and nano

Similar Messages

Maybe you are looking for