Input values for CONVERT_OTF_2_PDF function module

Hi All ,
I am using this function module 'CONVERT_OTF_2_PDF ' in my report(which will convert smartform to PDF) .
Can anyone please let me knw what are the input value should I pass to test
this function .('CONVERT_OTF_2_PDF)
OTF
DOCTAB_ARCHIVE
LINES
Thanks in advance

Hi,
TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
data: l_otf TYPE STANDARD TABLE OF itcoo.
DATA: l_objbin TYPE l_ty_tab_objbin.
DATA: l_docs TYPE STANDARD TABLE OF docs.
data: i_line TYPE STANDARD TABLE OF tline.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE =
TABLES
otf = l_otf
doctab_archive = l_docs
lines = i_line
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
Regards

Similar Messages

Input Parameter Details on Function Module PHIE_HIERARCHY_TRANSFER

I was trying to find some documentation on how to populate the input parameters when using Function Module "PHIE_HIERARCHY_TRANSFER". But could not locate any documentation on this...
Would appreciate if anyone can shed some light on this...?
Thanks in advance.
RK.

Did some research, but could not get any good documentation on the input parameters for the Function Module PHIE_HIERARCHY_TRANSFER...
Input Parameters:
I_S_HIEBAS TYPE RSAP_S_HIEBAS
I_S_HIEFLAG TYPE RSAP_S_HIEFLAG
I_S_HIERSEL TYPE RSAP_S_HIER_LIST
Any additional information on the above parameters is appreciated.
Thanks.

Usage problem: BI Query results as input for CRM Function module

Hi all,
In my VC model I have maintained a dataservice (BI query) which delivers a customer key to me. I would like to use this specific customer key output as an input parameter in a function module from my CRM system.
I have implemented both data services and mapped the fields. However, the problem is as follows:
The query gives an output customer number: 001044082163. The customer_id in CRM is 44082163, so the output from BW needs to be changed to 0044082163 (as we need to input 10 characters).
So the question is: How can we change the output from BI query 001044082163 to 0044082163 within the VC model?
Best regards,
Jan Laros

Hi
try this expression
'00'&MID(@BI_CUST_NO,4,8)
Good luck
Ola

Getting values from a function module called in a WDA method

Friends,
I am trying to execute a function module from WDA.
I have created a service call for the function module. The function module takes values from the user, looks up the corresponding values of another field and returns the values in an internal table.
I am using the "Method Call in Used Controller" of WD Code wizard to call the function module.
When the event handler method containing the call to the function module is executed, nothing happens.
I am not sure how to pass values to the function module and to get the return values from the function module.
I am new to using function modules from WDA. Please help me out.
Thanks and Regards.

Rashmi,
Is the function module intended to collect input data from the UI and process it? - Yes
If yes, then the input (importing parameter) to the Function Module is a table of values (which should be ideally from the context mapped to the Table UI Element). - The importing parameter is a single value NOT a table and is mapped to the view context.
Now this table UI Element is bound to the view controller context , which in turn is mapped to the component controller context. And you are indeed being able to read the value of this internal table in the component controller method where the function module is being called by means of get_static_attributes_table (Is this right? - Yes, I am able to read the table of values that is passed from the component controller view to form view context by using get_static_attributes_table.
Or are you being able to read it in the event handler method of the view controller and not being able to read it in the component controller method) -
The function module takes a single value as import parameter and returns a table of values as return value.
It works fine when no importing parameter is being used and returns the table of values that is getting passed from component controller context to form view context when i am able to read it using get_static_attributes_table.
Now the question is: how to pass the import parameter value to the function module. I assumed since the importing parameter is a context node (like the return values are), i should set the value ( captured when the user enters the value in the form) to the importing parameter context attribute using set_attribute method. Since it is mapped to the component controller context, i assumed it will get passed and the method will take it as input parameter.
Let me know if my assumptions are correct regarding passing the import parameters and what is missing here.
Thanks and Regards.

Need help for the Function Module 'PFL_GET_PARAMETER_INFO'

Hi Experts,
The FM 'PFL_GET_PARAMETER_INFO' returns the value for Profile Parameters for a system .
The inputs required for this FM are :
1. Parameter name : ( eg . login/min_password_lng etc. )
2 . Parameter Type
I am not sure about what the value of Parameter Type should be .
Its a mandatory field.
I have tried to search but could not find anything.
Can you please help me on this?
Thanks in Advance,
Harshit Rungta
Edited by: harshit rungta on May 27, 2011 8:15 AM

What exactly is the use-case for this?
Many developers "c-call" the params and neglect this feature of the type - also whether it is static or dynamic. Some params are even dynamic as system profiles in one direction but static as instance parameters in the other direction when changing the value.
As you cannot create your own system profile parameters, I do not see the use-case for why you are wanting to check it in advance, because the application APIs should do this.
What you are possibly looking for is function module SUSR_GENERATE_PASSWORD in this case. It will respect "the rules" in the params.
Do not use the legacy function RSEC_GENERATE_PASSWORD directly.
Cheers,
Julius

How to define null or empty value in BAPI function modules?

Hi,
I have problem with BAPI functions, where some parameters are mandatory.
For example: when I try to use HR BAPI's(BAPI_PERSDATA_CHANGE, etc.) I have to insert parameters like SUBTYPE,OBJECTID,LOCKINDICATOR. The PA0002 table that is used from this BAPI doesn't have SUBTYPE, OBJECTID, LOCKINDICATOR, for any of the records that I would like to select.
So what I tried, was to put a ' ', to indicate that is empty. It returned an error message saying "Make an entry in all required fields". Next tried to put in some values for these fields -- and it returned an error message saying "No data selected from 0002 for this period".
I also tried to run BAPI_FAMILY_CHANGE that uses data from table PA0021. Here I found some records with SUBTYPE, OBJECTID fields that were not empty, but LOCKINDICATOR was still missing. So I tried to put LOCINDICATOR value directly in to database (with MS SQL Enterprise Manager). After that I was able to use BAPI_FAMILY_CHANGE.
I think that manually inserting data in database is not normal procedure.
Is there something that I have missed out?
I mean -- how can I get this to work without inserting data directly in database?
How can I define null or empty value in BAPI function modules?
Thank you in advance.
Best regards,
Mihail

Defining an empty value for a parm in a table is easy.
First get the function's definition from the SAP system
Second only populate the fields for which you have a value to set
Third execute the function.
The JCO takes care of the rest.
Enjoy

Test web service for a function module

Hello,
I have created web service for a functiona module. I can see the same service in SE80 in Enterprise Services.
How do I test this service?
I can see the URL in WSDL tab but when I try to execute it give me following error,
What has happened?
URL http://emhbssap15.domain.local:8027/sap/bc/srt/wsdl/sdef_service_name/wsdl11/ws_policy/document call was terminated because the corresponding service is not available.
Note
The termination occurred in system BDV with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:EMHBSSAP15_BDV_27-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
The URL I am trying is
http://emhbssap15.domainname:8027/sap/bc/srt/wsdl/sdef_servicename/wsdl11/ws_policy/document?sap-client=400
Can anyone help me?
Regards,,,
Sunil Joyous
Edited by: Sunil Joyous on Dec 2, 2009 1:52 PM

Thanks Venu for your input.
Unfortunetly we do not have Java stack on our development system. You said we can test it by SOAP UI tool. Where do I see the WSDL file for the service?
I used WSDL from SE80 --> Service --> WSDL tab, but SOAP UI does not accept this format ?
What are the other ways I can test this web service? I think about SAP PI, importing RFC & creating web service or creating ABAP proxies... Which is the best way to go forward in case you do not have Java stck.
Regards,,,
Sunil Joyous

VPD: Column Level Masking - Error: ORA-28104: input value for sec_relevant_cols is not valid

Hi Gurus,
I am trying to mask the secured column from the table for one specified user, Here is the detail of DB and code which I am using to apply the security:
DB Version: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
Security Function:
create or replace function kr_sec_function_papf(p_object_schema IN VARCHAR2,
p_object_name VARCHAR2)
return varchar2
as
p_nid varchar2(200);
whoami varchar2(100);
begin
if SYS_CONTEXT('USERENV', 'SESSION_USER') = 'VPDTEST'
then
p_nid := 'national_identifier = national_identifier';
return (p_nid);
else
p_nid := '1=2';
return (p_nid);
end if;
end kr_sec_function_papf;
Code to Add Policy:
BEGIN
DBMS_RLS.ADD_POLICY(
object_schema => 'APPS',
object_name => 'PER_ALL_PEOPLE_F',
policy_name => 'secure_emp',
policy_function => 'kr_sec_function_papf',
statement_types => 'SELECT',
sec_relevant_cols=>'NATIONAL_IDENTIFIER',
sec_relevant_cols_opt=>DBMS_RLS.ALL_ROWS);
END;
I am getting error while executing the above plsql block, Error is:
ORA-28104: input value for sec_relevant_cols is not valid
ORA-06512: at "SYS.DBMS_RLS", line 20
ORA-06512: at line 2
Any one please help me to resolve the issue.
Thanks in Advance.
~Krishna Nand Singh

Hi Every one,
I got this issue resolved.
The issue is with parameter object_schema => 'APPS' , the object schema name is 'HR' and APPS has synonym with the same name.
The Correct code should be:
BEGIN
DBMS_RLS.ADD_POLICY(
object_schema => 'HR',
object_name => 'PER_ALL_PEOPLE_F',
policy_name => 'secure_emp',
policy_function => 'kr_sec_function_papf',
statement_types => 'SELECT',
sec_relevant_cols=>'NATIONAL_IDENTIFIER',
sec_relevant_cols_opt=>DBMS_RLS.ALL_ROWS);
END;
Thanks,
Krishna Nand Singh

Alternative for STRING_CENTER function module

Hi,
Can any one give me the Alternative for STRING_CENTER function module.
it is there in 4.7 when i am using the same in ecc 6.0 it is giving as absolute statement .
Please give the solution for this.

Hi,
C147_STRING_SPLIT_AT_POSITION
STRING_SPLIT
STRING_SPLIT_AT_POSITION
check this sample code
DATA: text(10) TYPE c VALUE '0123456789',
text1(6) TYPE c,
text2(6) TYPE c.
PARAMETERS position TYPE i.
CALL FUNCTION 'STRING_SPLIT_AT_POSITION'
EXPORTING
string = text
pos = position
IMPORTING
string1 = text1
string2 = text2
EXCEPTIONS
string1_too_small = 1
string2_too_small = 2
pos_not_valid = 3
OTHERS = 4.
Regards

Select options values pass to function module

Hi all,
I want to pass the values entered in the select options to the function module. How should my function module interface be declared for passing the select options
I tried declaring like
t_range type data in the tables tab. But this throws error.
Please let me know how to pass select option values back to function modules.
Thanks,

Hi,
Check this code.
data: node_flights type ref to if_wd_context_node.
data: rt_carrid type ref to data.
data: rt_connid type ref to data.
data: isflight type table of sflight.
data: wsflight type sflight.
field-symbols: <fs_carrid> type table,
<fs_connid> type table.
Retrieve the data from the select option
rt_carrid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CARR_ID' ).
if rs_carrid is not initial. Here you can check that if rs_carrid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_carrid->* to <fs_carrid>.
endif.
Retrieve the data from the select option
rt_connid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CONN_ID' ).
if rt_connid is not initial. Here you can check that if rt_connid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_connid->* to <fs_connid>.
endif.
if <fs_connid> is not initial and <fs_carrid> is not initial.
Retrieve that data from the database. Normally it is suggested to
encapsulate the data retrieval in a separate class.
For simplicity, the SELECT statement has been implemented here.
clear isflight. refresh isflight.
select * into corresponding fields of table isflight from sflight
where carrid in <fs_carrid>
and connid in <fs_connid>.
endif.
Bind the data to the context
node_flights = wd_context->get_child_node( name = `FLIGHTS` ).
node_flights->bind_elements( isflight ).
Hopes this will helps you.
Regard
Manoj Kumar
Edited by: Manoj Kumar on Mar 16, 2009 10:41 AM

How to execute Se30(performance check) for a function module

can anyone please let me know hot to execute perofrmance check for a function module.

In SE30 below the program option you have Function Module option.
Give the FM name there >execute, It will lead to the SE37 for Function Module execution screen, enter the values>Execute.
The ctrl will return back to SE30.
Press Evaluate to know the analysis.
Hope this answers.
Regards
Vinayak

How to insert a code for a function module into a Customer Exit Variable?

I have two Key Figures viz., Net Prchs Rtl, and Net Prchs Unt. Both these Key figures have This Week (TW) and Last Week (LW). There is a variable for This week but there is no variable defined for Last week.
I need to get data in the column LW (Last Week) for both the key figures.
In function module EXIT_SAPLRRS0_001 one of the functions I have is:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
I need to create a new variable to get values in the Last week column for different key figures and use function 'DATE_TO_PERIOD_CONVERT' in that variable.
Can anyone please explain me the steps as to how to use a function module in a variable so that when the variable is used in a key figure it shows the output.
In other words what I want to know is after creating a Customer exit variable of type Characteristic value how do I refer the above mentioned function moduel and insert the code for the function module into the Customer exit variable that I created.
Thank you.
TR.

Hi Wond,
Thanks a lot for your reply. I understand what you mean but I have never done this before so can you please explain it in a detailed manner. I have the following code:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
            EXPORTING
              i_date         = ld_date
              i_periv        = lc_periv
            IMPORTING
              e_buper        = ln_poper
              e_gjahr        = ln_bdatj
            EXCEPTIONS
              input_false    = 1
              t009_notfound = 2
              t009b_notfound = 3
              OTHERS         = 4.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            lc_poper = ln_poper.
            CONCATENATE ln_bdatj lc_poper+1(2) INTO wa_e_t_range-low.
            wa_e_t_range-sign = 'I'.
            wa_e_t_range-opt = 'EQ'.
            APPEND wa_e_t_range TO e_t_range.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
I believe I should now use the above code in my customer exit variable. If that's right can you please explain me the steps as to how should I do this so that the variable gets populated.
Thank you.
Regards,
TR.

Performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA)

Hi Friends
I am having performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA) and one my client got over 8 thousend employees . This function-module taking forever to read the data. is there any other function-module to read the absences data IT2001 .
I did use like this .if i take out this F.M 'HR_TIM_REPORT_ABSENCE_DATA_INI' its not working other Function-module.please Suggest me .
call function 'HR_TIM_REPORT_ABSENCE_DATA_INI'
exporting "Publishing to global memory
option_string = option_s "string of sel org fields
trig_string = trig_s "string of req data
alemp_flag = sw_alemp "all employee req
infot_flag = space "split per IT neccessary
sel_modus = sw_apa
importing
org_num = fdpos_lines "number of sel org fields
tables
fieldtab = fdtab "all org fields
field_sel = fieldnametab_m. "sel org fields
To Read all infotypes from Absences type.
RP_READ_ALL_TIME_ITY PN-BEGDA PN-ENDDA.
central function unit to provide internal tables: abse orgs empl
call function 'HR_TIM_REPORT_ABSENCE_DATA'
exporting
pernr = pernr-pernr
begda = pn-begda
endda = pn-endda
IMPORTING
SUBRC = SUBRC_RTA
tables
absences = absences_01
org_fields = orgs
emp_fields = empl
REFTAB =
APLTAB =
awart_sel_p = awart_s[]
awart_sel_a = awart_s[]
abstp_sel = abstp_s[]
i0000 = p0000
i0001 = p0001
i0002 = p0002
i0007 = p0007
i2001 = p2001
i2002 = p2002
i2003 = p2003.
Thanks & Regards
Reddy

guessing will not help you much, check with SE30 to get a better insight
SE30
The ABAP Runtime Trace (SE30) - Quick and Easy
what is the total time, what are the Top 10 in the hitlist.
Siegfried

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

Required to get class Charateristics and values for an functional location

Hi ,
   As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
Regards
Arun T

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

Input values for CONVERT_OTF_2_PDF function module

Similar Messages

Maybe you are looking for