Input variables not displayed in bex analyzer

Hello Experts ,
I am facing a problem .I am displaying a report on bex analyser 7.0 and i am entering some input variables.
But my problem is when the result is displayed in the analyser and i am trying to take a print out everythg is coming in the print preview except the input variable values which i have used.
And i have to show this printout to the client and i am clueless how to make those variables visible in my analyser so that i can take printouts.
Pls help me on this.
I will be greatfull.
Regards,
Suyash
Edited by: sarang bhalerao on Mar 20, 2009 11:05 AM
Edited by: sarang bhalerao on Mar 20, 2009 11:05 AM
Edited by: sarang bhalerao on Mar 20, 2009 11:05 AM

Please do not raise same posts across forums..
/thread/1278673 [original link is broken]
The above post is being deleted as duplicate..

Similar Messages

Chinese characters not displayed in Bex Analyzer

Chinese characters in a BI report display fine in Bex Web, but not in Bex Analyzer (Excel). Not sure if this is a NW2004s issue, or just an excel config issue. Is this a known issue?

The problem is fonts. Are you setting a specific font for your dialog? If not, this is a JRE bug. Regardless, you can display the Chinese if you set the font for the dialog using a font that you know contains Chinese glyphs.
John O'Conner

Roles not displayed in BEx Analyzer for NW2004s

We are evaluating a technical upgrade only from BW 3.5 to Netweaver2004s. Under this plan, the 3.5 security will not be migrated to 7.0. We are using SAPGui Frontend 6.40 for BI. The existing BW 3.5 roles are not display in the Role Menu of SAP NetWeaver BEx.
Any ideas on this?
Isbell

Got the following response from SAP and this resolved the issue
please add the parameter
DELETE_DOUBLE_TCODES with PATH = 'NO'
into the table: ssm_cust (via tx: se16)
The settings in SSM_CUST defines a compress mechanism for the user menu
known as "Redundancy avoidance" and described in notes 357877 and 357693
Redundancy avoidance deletes easy access menu entries for doubled
transaction codes whenever SSM_CUST contains
1. an entry CONDENSE_MENU with PATH = 'YES' and
2. either an entry DELETE_DOUBLE_TCODE with PATH = 'YES' or no entry
DELETE_DOUBLE_TCODES, at all.
If you don't want doubled transaction codes to be deleted, then simply
add an entry DELETE_DOUBLE_TCODES with PATH = 'NO' into table SSM_CUST.
Suresh

Variable Screen Does Not Display in Bex Web Analyzer after first time

We recently upgraded from BW 3.1 to BW 7.0 (without upgrading specifically to 3.5). We are having a problem with our Web Bex Analyzer not showing the variable screen although the variable screen is displayed successfully when running the same query from the Bex Analyzer. Based on feedback from other posts regarding similar topics, we modified the 0analysis_pattern template to ensure that Display Variable Screen was checked on. We are finding that when we open the Web Bex Analyzer and do a New Analysis, the first query we try to run will always have the variable screen displayed successfully. Any susbsequent queries we try to run by clicking on New Analysis in that same open window will not show the variable screen and will start executing open ended. This is occurring regardless of whether the query has mandatory or optional variables and we have confirmed that there is no personalization set for the variables being used. We have tried it with several different queries and the results are consistent. The first query you run shows the variable screen successfully and any queries run after that do not. Any help in resolving this would be greatly appreciated as we have exhausted our resources researching and troubleshooting this problem.

We did open an OSS note and heard back from SAP. We made the recommended setting, see their response below, but as they stated, it will only show variable screens for queries that have at least one mandatory variable entry after the first query is opened.
Response from SAP:
Please check if the following setting is made within your template --
In the 'Standard Actions' of the Web Template, do you have the setting
'Action Before First Display' set to OPEN_VARIABLE_DIALOG
The behaviour of the variable screen is different if you use mandatory
variables and optional variables. If you have only optional variables,
the Display Variable does not force the variable screen.
Also, using the parameter VARIABLE_SCREEN=X only influences the
web application at STARTUP. This would not come into affect when you
use the 'New Analysis' button. This button resets the dataprovider so
this would not affect the variable screen and would not redisplay the
variable screen as you require.

Variable window not showing through BEx analyzer

HI Experts,
I am facing a weired situation with one of the variable.
I have a Customer Exit variable which is Input Ready and entry is Mandatory, i wrote some code in CMOD to fetch default values through I_STEP=1 and my requirement is that user should able to change the values if needed.
now, the problem is, I can able to get the variable input screen when i execute the query through RSRT with Query display mode as HTML. But when i execute the same query in BEx analyzer or through RSRT with different Query Display modes like List/Bex Analyzer am not getting the variable input screen.
The variable is taking the default value generated through CMOD code and the same values are being used in determining the query output..
Please suggest me what do i need to do inorder to view the Variable input screen in BEx analyzer.
I am using BEx Analyzer 3.x for the queries and working with
SAP Version   -
   SAP EHP 1 for SAP NetWeaver 7.0
DB:                  -
   ORACLE 11.2.0.2.0
OS                   -
    AIX

I found the solution in one of the SAP notes and the issue is resolved.
We used Note: "1609237" to resolve the issue. Hope this might help anyone who faces this same problem..

User Variables values are not showing in Bex analyzer

Dear Friends,
I created a report in Bex analyzer ( Excel).
Now i want to show the variables values in the report.
i put text item there and click on it but in filter tab there is no variable is exist.
Any help will be highly appricated.
Regards
Naeem

dear i know how to display the variable values.
But unfortunatilly there is nothing appear in filter tab.
my variables are not in filter tab its empty.
i already choose the data provider.
regards
Malik

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

How to remove Variables Personalization in the BEx Analyzer?

Hi All, Help us. Say please:
1. How to remove personal Variables Personalization for query/user in the BEx Analyzer with standart tools?
2. How to disable personalization button on varible screen?
Our users very often click this "bad" button and after that can't to find required criteria on selection criteria screen. We've studied BW Guides and Forum materials (may be not very thoroughly), but search usefull information only for Web Reporting. We've search corresponding table /BI0/APERS_VAR00 but fear to edit it directly.
Best regards, Igor

Hi All,
I think that best way to remove personalization of any var or infoobject could be done through the next logic.
we have ODS 0PERS_VAR.
we need to remove line from this ODS with specific parameters like USERNAME and VAR_NAME or IOBJ_NAME.
Step by step instruction:
1. Create update rule from ODS 0PERS_VAR to the same ODS.
2. Write 'Start routing' to update ODS with the next ABAP-code
LOOP AT DATA_PACKAGE.
 DELETE FROM /bi0/apers_var00
 WHERE tctusernm = DATA_PACKAGE-tctusernm AND
 ( tctvarnm = DATA_PACKAGE-tctvarnm OR
 tctiobjnm = DATA_PACKAGE-tctiobjnm ).
 DELETE DATA_PACKAGE.
ENDLOOP.
3. Activate update rule.
4. Update ODS Data in Data Target with 'full update' !
5. At the selection screen of info-package specify fields
 < 'TCTUSERNM' - username > AND
 < 'TCTVARNM' - var name > OR < 'TCTIOBJNM' - infoobject name >
PS:\ As result personalisation will be reseted selectively.
if it help you, it is a chance to donate some points to me
best regards

Macro not working in BEx Analyzer

Can you please explain why my Macro is not working?
We're on BI 7 with Excel 2007. I have done the following:
1) Open Workbook from BEx Analyzer and the result display on the worksheet. The was inserted in C10 and therefore, the result was display from C10 onwards.
2) I have created a Macro with the following code:
Sub Macro1()
' Macro1 Macro
    Range("C5").Select
    With Selection.Interior
        .Pattern = xlSolid
        .PatternColorIndex = xlAutomatic
        .Color = 65535
        .TintAndShade = 0
        .PatternTintAndShade = 0
    End With
End Sub
3) When click to run the Macro manually, I can see the color of C5 is changed.
4) Now I have include this Marcro in Workbook Setting ->Exits tab, Run Macro on Refresh. Here I enter my Marco name.
5) In Workbook Setting ->General tab, I also set the Refresh Workbook on Open option.
6) I have also set the Trust Center setting: select Trust access to the VBA project and Enable all macros.
7) Then I save the Workbook.
8) when I re-open the Workbook, the color of C5 is not change!!!
Can you please help.

Aglukas,
Thanks again. I understand the name of the Macro can be anything and this is how to create the Macro:
1) Run workbook, the query result display on the screen.
2) In Excel 2007, I click on Developer tab ->Macro.
3) Enter Macro name (Macro1) and click on Create button.
4) I have VB editor open with following:
Sub Macro1()
End Sub
5) So added the following code to Macro routine in VBA Module:
Sub Macro1()
With ThisWorkbook.Sheets("Sheet1")
Stop
.Activate
.Cells(15, 1).Interior.Color = RGB(220, 254, 250)
End With
End Sub
6) I then added the Macro1 to Workbook Setting ->Exit tab, and click on Add Macro button.
When I run/refresh the workbook, I didn't get into debug mode at all!!!
What is wrong in above steps?
Please advice, thanks.

Conversion of characteristic values before displaying in Bex Analyzer

Dear all,
does anybody know whether it's possible to get influence on the manner in which a characteristic is embedded into an BEx Analyzer sheet (may be via user exit, function module exits or something else) .
In our project we have characteristics (describing production parameters) with numeric values which can't be used successfully with EXCEL AutoFilter functions because they are strings in EXCEL. Due to our data warehaouse design koncept it is not all right for us to store these values as key figures. So we are searching for methods to convert these string values into numeric values before we give them into the EXCEL sheet.
Lot of thanks for you in advance!
Dorothea Gebauer.

High Leo Gillian,
at first thank you very much for your answer. Unfortunately your information is not practicable for us. There are hundreds of characteristics, in the future there may be mor than two thousend, which have to be converted before they are embedded into the sheets. Therefore we need an automatically done conversion.
with best regards Dorothea Gebauer

KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

Hello Experts,
I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
I am in confusion where the exact issue will be.
If any body faced this kind of scenario is your project, kindly reply me.
For any more clarifications i will respond you immediately.
Thanks,
SN

Hi,
check aggregates,index etc for cube
check key figure selection as well in Multiprovider for respective Infoprovider
just create test query on Infoprovider and then on Multiprovider and see..
Check RSRT - regenerate the query
also see there are various options like execute+debug has ....just check them
Thanks and regards
Kiran

Formula variable not displayed in proper format

Hai,
I used a keyfigure formula variable, that gets current date, in a query (In columns, key figure structure to calculate no. of days). The no. of days are calculated peoperly and everything is just perfect.
But after executing the query, when I display text element=> variables, the system is displaying the variable as 20,060,803 as opposed to date format like 8/3/2006.
Question: Is it how the date formula variable is displayed or there is a system error?
I remember seeing it in date format.
Can somebody comment on this or suggest a solution.
I couldn't find notes on this too!

In the restricted key figure formula definition, use the Data function "Process Value as Date DATE" and enclose your restricted key figure calculation inside the date parenthesis.
I have another related problem. I am trying to use dates to calculate 30 days before a (date formula variable), 60 days after, etc. Some of the dates are calculating correctly, but some are just returning an X. All appear to be extracting with the same format.
Anyone have a similar problem?

System Variable not display properly

when i go sales>sales report> backorder report there is a feild for an example custoer name and i
need to fetch this feild on PLD report but when i want to see the varible name it is not showing
properly .
screen short is attached for ur reference ecen it is happing for all the feild on any document.
some document it shows but some document some data is hide .
not showing properly.
i need to resolution on this and need system varible list.
Could you please let me know the area that shows table name .
i am going to explain in detail like if i need to see some table name then my
first step will be go to>view>system information-->then move the
mouse on value from which i want to see table name then the table name
display down area near by task bar.
i just wanted to say sometimes table name not display prpperly ,its hide so
can i see the hide table name this is my questation.
please let me know the workaround only so that i can developed my report.
awating for your reply.
Regard,
Divya

Divya,
I don't think there are table names on this back order form. All variables are calculated results by system.
Thanks,
Gordon

Local formula created in web analyzer not reflected in bex analyzer.

Hello all,
I had created a Local formula in the web analyzer and saved the query as a view. Now, when I open the same view in
bex analyzer then I cannot find the local formula column; i.e. it is not reflected in the bex analyzer.
Is this an error or this is not possible?
Thanks in advance,
Sandy.

Hello Sandy,
If you create the formulo at the web analyzer you will not be able to see it at the bex analyzer. Only if you create at the query designer, so you will be able to see it at the web and bex analyzer.
Thanks,
Diego Ferrary

Query Description not displaying in Bex Template

Hi all,
I have created a Template in Bex Analyser in the Design mode of a Workbook. I have assigned this workbook template as the Default Template for all the Queries by selecting it in Global Settings. I closed this workbook template and opened a query. I am getting the template embedded in the query as i designed but the problem is the Query Description is not displaying correctly. In the Query, it is showing the Workbook Description in the header instead of Query Description.
Where should i change it? Help me in fixing this. Thanks.
Regards,
Murali

Hi,
you should use an Info Field WebItem to display the query name or description in your Webtemplate.
Parameter in InfoField: General Text Elements for a Data Provider (GENERIC_TEXT_ELEMENT).
You use this parameter to choose the generic text element that is to be displayed:
● Query Name (QUERY)
● Query Description (QUERY_DESCRIPTION)
http://help.sap.com/saphelp_nw04s/helpdata/en/47/96784226d1d242e10000000a1550b0/frameset.htm
Regards
Andreas

Input variables not displayed in bex analyzer

Similar Messages

Maybe you are looking for