Inputs for Gaming?

is there any way of connecting my xbox to my imac i know they have tv converters and stuff but im curious if those would work to connect my xbox? please help thank you.

The iMac does not have any direct video input.
You would need to use one of the devices made by Elgato.

Similar Messages

Insignia TVs For Gaming (Input Lag Question)

I am considering either the 40 inch or 42 inch Insignia.
NS-42D510NA15
NS-40D510NA15
This TV will only be used for gaming. Does anyone have this TV and can comment on whether or not it has input lag? It is detrimental to the experience that input lag be at a minimum.
Thanks in advance for any responses.

Hi there NeoZatan-
Just as a FYI, we also have a great Insignia community forum as well that may be able to help answer your question.
You can find that forum here.
Thanks for posting!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

IMAC Displayport HDMI INPUT for Wii, PS3, XBOX360 etc

The iMAC supports to use its 27" monitor as an external monitor for other devices through its Mini Displayport that supports both output AND input.
There are many HDMI adapters for the Mini Display adapter but I want to know if a special adapter is required for input and what are the specifications/standards/name for the adapters, contacts and cables that are required?
Specifically I am going to use the 27" display for gaming consoles mentioned above (Wii with the Wii2HDMI adapter).
What do I need to know to write down on my shopping list? Thanks!

At this point I think that you are all wishing & hoping, but are perhaps operating on hype. Yes the 27" iMac is the first iMac with a video import. It has a bi-directional mini-DisplayPort. Various models of Macs have had mini-DisplayPorts for video output since 2008. It is not a new port on Macs.
There are a number of adapters for this port, some made by Apple, some made by a number of 3rd party Mac accessory manufacturers. Currently you can buy the following adapters; mini-DisplayPort to DVI (D), mini-DisplayPort to VGA, mini-DisplayPort to Dual-link DVI (D), and mini-DisplayPort to HDMI. There is also a mini-DisplayPort to mini-DisplayPort cable. The other thing to remember is that the mini-DisplayPort does not carry audio.
However, if you go to the Apple iMac webpages you will find that Apple is very specific about how you can use the mini-DisplayPort at this time. This is what it says;
Mini DisplayPort.
The Mini DisplayPort lets you connect an external display, including the Apple LED Cinema Display, to your iMac. On the 27-inch iMac, the same port offers input, too. So you can connect any external source that has DisplayPort output — including a MacBook or MacBook Pro — and use your iMac as a display. (emphasis mine)
So Apple is saying that currently you can use the 27" iMac as a display for devices with mini-DisplayPort output, such as another Mac, like one of the notebooks. Meaning that you can use the 27" as an external monitor for a MacBook Pro with a mini-DisplayPort to mini-DisplayPort cable.
Anything that you have read at outside websites with reviews about the new iMac and hooking up a Wii, a PlayStation, a Blu-Ray DVD, etc is pure speculation at this point and there is no guarantee that patching mini-DisplayPort adapters to other technology standard cables, such as DVI or HDMI, will provide the proper input to use the 27" as a display.

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Can not select external input for sound

can not select external input for sound

Hey there RoosterMonkey,
It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
Soundtrack Pro 3: Troubleshooting Basics
http://support.apple.com/kb/ht3659
Update to the latest software versions
From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
Check compatibility and driver versions for third-party devices
If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
Try a different Multitrack Project or Audio File Project
Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, choose Go > Go to Folder from the menu bar.
Type ~/Library/Preferences in the "Go to the folder" field.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro in the "Go to the folder" field.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro/Layouts in the "Go to folder" field.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to folder" field.
Remove the "com.apple.audiounits.cache" from the Caches folder.
Remove receipts and reinstall Soundtrack Pro 3 and Compressor
Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
In Mac OS X v10.6 Snow Leopard or OS X Lion
Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
sudo pkgutil --forget com.apple.pkg.Compressor
sudo pkgutil --forget com.apple.pkg.Qmaster
sudo pkgutil --forget com.apple.pkg.VideoOutSupport
sudo pkgutil --forget com.apple.pkg.PSTSharedA
sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
sudo pkgutil --forget com.apple.pkg.DSPPublishing
sudo pkgutil --forget com.apple.pkg.SoundtrackPro
sudo pkgutil --forget com.apple.pkg.Uncompressed422
Then, reinstall Soundtrack Pro and Compressor using the following steps:
Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
Open Soundtrack Pro to verify that the issue has been resolved.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Which Imac would be better for gaming?

So i've got a choice between these two models -
£1329.60
3.1GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
TB Serial ATA Drive @ 5400 rpm
8gb Ram
NVIDIA GeForce GT 750M 1GB GDDR5
Apple care
27 inch model
3.2GHz quad-core Intel Core i5
Turbo Boost up to 3.6GHz
8GB (two 4GB) memory
1TB hard drive1
NVIDIA GeForce GT 755M with 1GB video memory
Apple care
£1407.60
Basically, the decision is down to, do I want a slightly better graphics card and bigger screen, or a smaller screen and better processer?
I just want to gauge opinions, i'll be using it as my day to day computer as well, some video editing, but nothing too strenuous. How big is the difference in graphic and processing powers.
Thanks for your help

With all due respect the question was "which iMac would be better for gaming?". Key word here is 'better', not 'perfect', not 'ideal'; just 'better'. Unqualified answers and/or sweeping statements do very little to contribute to a discussion, let alone answer the question under consideration.

New Macbook Pro 2014 for Gaming / casual use

Hello there! I currently have a 2011 13" Macbook Pro with
Intel HD Graphics 3000 512 MB
16GB RAM
500GB Harddrive
and a 2.4 GHz Intel Core i5
I really like to play video games but with this current setup ^ its very sluggish and I get very low FPS
I'm considering getting the 13-inch MacBook Pro with Retina display and with the 3.0GHz Dual-core Intel Core i7, Turbo Boost up to 3.5GHz
My questions:
Will this computer be able to handle a constant 60fps in most games? (Borderlands 2, portal 2, Bioshock Infinite)
And I've heard other places that this computer also has a Nividia graphics card that it switches over to when you play anything that requires more than the Intel 4000 that it comes with.
Thanks for the help!

Hi there!
No it wont.
Macbook Pro's hardware are mediocre for gaming. In your specific case, the 13" does not offer the possibility of a dedicated graphics card, only comes with Intel Iris. The 15" one does, the NVIDIA GT 750M with 2gb, yet it's weak for gaming above 40-50 fps, also dual-core processors are not very powerful these days either and you will most likely experience heating issues on intensive gaming sessions. If you like gaming Mac is not very efficient for it, unless you get a mac pro, but of course you would loose portability. The 27" iMac can be set with the GT 780m, it has 4gb but its still weak since its a mobile graphic chip as well, even the 5k iMac uses almost identical hardware setup than the regular iMac but with an AMD chip (also 4gb ram), while the 5k looks great with such hardware it is unable to handle smooth gaming on that resolution as well.
Dont get me wrong, I'm not here to trash Apple, at the office we work with around 8 to 10 macbook pros but none of them, not even high end ones are able to game smoothly, in fact, some games run better on windows via bootcamp than OS X.
Hope it helps.

Get input for 100 dynamic fields in a single screen

Hi all
I got one requirement wherein i need to accept input for around 100 dynamic fields in a single screen. screen can scroll down if possible.
Can anyone tell me whether it is possible. if yes please let me have the sample code.
Thanks
Ravindra Suvarna

Ravi,
Probably a TAB STRIP might help you.
Seggregate your 100 fields logically, say 5 groups.
Have a TAB STRIP CONTROL, with 5 tab strips and place 20 fields in each of the tabs. Each tab strip will have a sub screen.
Regards,
Ravi
Note : Please mark the helpful answers.

Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

Hello,
I wrote a batch input for a transaction (IQ02) and all works fine except one thing:
-when all data is entered and SAVE button is pressed, there is an additional pop-up, from an user exit which needs an YES/NO answer.
The function module used to display the popup is: 'POPUP_TO_CONFIRM'
I do not manage to press the YES button. This is the data I receive when pressing F1 on YES button:
Program SAPLSPO1
Function OPT1
Normally, in batch input, this is the way I pass user-commands:
PERFORM bdc_dynpro USING 'SAPMIEQ0' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
But it's not working for this particular situation.
Any ideas?
Thank you.
Edited by: Julius Bussche on Jan 5, 2009 2:07 PM
Quality of subject title improved.

Hi
Find out under which condition popups appears.
for that condition you have to put the following code
PERFORM bdc_dynpro USING 'SAPLSPO1' ''<SCREEN_NUMBER>'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OPT1' .
Hope this helps,
Rajat

Thank youbfor optimizing the touch input for scrolling on my HP Slate 500, why wont the others do the horizontal scrolling feature enables?

After testing all other available browsers the past month I have arrived at the conclusion that the Firefox browser is the only one that enables touch input for scrolling. Trying to navigate pages without this function using IE, Opera, Safari & Chrome is just tedious. I'm using the Slate as it was intended, business functions especially day to day charting for my patients in an online system.
The larger tabs for opening new searches & sites. If Microsoft plans on making W8 truly touch enabled they need to take note of what FF has done here. The touch input is limited on W7 but you've succeeded where others have failed.
3 cheers for FF! I couldn't do my job and document patient progress w/o your intuitive design. Brendan S. - Latham, NY
I guess the question is why are the others not developing these key features for Windows based slates...are they ignorant or is FF that much further ahead.

After testing all other available browsers the past month I have arrived at the conclusion that the Firefox browser is the only one that enables touch input for scrolling. Trying to navigate pages without this function using IE, Opera, Safari & Chrome is just tedious. I'm using the Slate as it was intended, business functions especially day to day charting for my patients in an online system.
The larger tabs for opening new searches & sites. If Microsoft plans on making W8 truly touch enabled they need to take note of what FF has done here. The touch input is limited on W7 but you've succeeded where others have failed.
3 cheers for FF! I couldn't do my job and document patient progress w/o your intuitive design. Brendan S. - Latham, NY
I guess the question is why are the others not developing these key features for Windows based slates...are they ignorant or is FF that much further ahead.

Disabling the Qty field for Input for Sub items in Sales Order and Delivery

Hi..
I have a requirement, where by we need to disable the qty field vbap-kwmeng for input for sub items of the BOM.
I am planning to use the user exit USEREXIT_FIELD_MODIFICATION...in the include MV45AFZZ for sales orders.
But i need to disable the input only after the BOM Explosion and item category determination in the sales order.
Can i Use the same exit ?? what additional conditions i need to take into account.
also we need to disable the delivery quantity field also for the sub items of this sales bom.
I see that this User exit is not available in delivery procesing. How to acheive the required functionality in the delivery processing...
your advice is much appreciated in this matter.
Regards
Srini

hi,
Route is determined
1.Country of Departure & Departure Zone taken from Shipping Point
2.Country of Destination & receiving Zone from Ship to party
3.Shipping condition from CMR
4.Transportation Group from MMR
5.Weight Group which is optional.
Check the above.
Route is determined in delivery.
ASHA

Help needed in mapping BI query output to use as input for BAPI

Hi,
After wrestling with it for quite some time I choose to ask yet another question here. I want to use the output of a BI query I use as input for a BAPI. I just can not get the mapping correctly:
The query delivers: 104908BA092F7501F5E1008000829000AC
I need: 104908BA092F7501F5E1008000829000AC
How can I lose the two first digits? Thanks in advance!
Best regards,
Jan

Nevermind. I found out myself. I am now using the statement MID(@GUID,2,32) in the connection.

I want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

"At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
Personally I would double these amounts and add to that the diskspace needed for your Windows games.
Stefan

IMac for Gaming using Win XP Pro

Early 2006 I purchased an iMac 2.0 w/ 2G RAM using x1600 ATI card w/ beta boot camp using XP Pro for gaming purposes.
Now I want to expand my horizons a bit to a new iMac with the same idea as above.
My gaming includes Battlefield 2, COD4, and soon Crysis. So here is the system I want:
iMac 3.06 w/ nvidia 8800 GS which I read is NOT the 8800 but some other nvidia card. I want to expand to 4G RAM, BUT replacing all the RAM with either Crucial or Kingston for Dual Channel. Will XP Pro be stable w/ 4G dual channel? Will this system utilize DX 10. w/ the nvidia card on this Mac? If I get Crysis, I want to be able to set everything on HIGH. Are there any Driver problems that I should be aware of?

Firefox has no built-in sounds. The following Extension offers a few.
*Navigational Sounds: https://addons.mozilla.org/en-US/firefox/addon/1030/

How to pass the ObjectType as input for search Criteria

Hi All,
I have search function that takes the input parameters and returns all the matching rows. this is straight forward only. My problem is having multiple types as a input parameter. that is the reason i am not able to pass the input value for these types.
My Input Type table looks like this.
CREATE OR REPLACE TYPE T_T_PARTY_REQUEST_CRITERIA
AS TABLE OF T_O_PARTY_REQUEST_CRITERIA;
CREATE OR REPLACE TYPE T_O_PARTY_REQUEST_CRITERIA
AS OBJECT
SYSTEM_IDENTIFER VARCHAR2(50),
PROCESS_TYPE VARCHAR2(50),
UPDATED_BY VARCHAR2(50),
STATUS VARCHAR2(50),
CHILD_REQUEST_INDICATOR VARCHAR2(25),
TRACKING_REQUEST_INDICATOR VARCHAR2(25),
REQUEST_TYPE VARCHAR2(50),
REQUEST_TYPE_CLASS_NAME VARCHAR2(50),
PARTY_KEY_IDENTIFIER T_T_PARTY_KEY_IDENTIFIER,
ADDTN_IDENTIFIER_INFO T_T_ADDTN_IDENTIFIER_INFO
Last two inputs are type again.my question here is how to pass the values for these two T_T_PARTY_KEY_IDENTIFIER and T_T_ADDTN_IDENTIFIER_INFO. I have defined the the last two types following.
CREATE OR REPLACE TYPE T_T_PARTY_KEY_IDENTIFIER
AS TABLE OF T_O_PARTY_KEY_IDENTIFIER;
CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_INFO
AS TABLE OF T_O_ADDTN_IDENTIFIER_INFO;
CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_VALUES
AS TABLE OF T_O_ADDTN_IDENTIFIER_VALUES;
CREATE OR REPLACE TYPE T_O_PARTY_KEY_IDENTIFIER
AS OBJECT
PARTY_KEY_TYP_NM VARCHAR2(50),
PARTY_KEY_VALUE VARCHAR2(50)
CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_INFO
AS OBJECT
ADDTN_INFO_KEY_TYP_NM VARCHAR2(50),
     ADDTN_IDENTIFIER_VALUES T_T_ADDTN_IDENTIFIER_VALUES
CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_VALUES
AS OBJECT
ADDTN_RQST_VALUE VARCHAR2(50),
ADDTN_RQST_VAL_DT TIMESTAMP(6),
ADDTN_RQST_VAL_NUM NUMBER(19, 2)
I have pasted the query here from my function. when i pass the null as part of input for these 2 types my query is working. otherwise it is saying invalid Identifier.First I tried with first Type.
I am passing the value as
(PRKYTP.PRTY_KEY_TYP_NM = ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM IS NULL);
Error is Error(34,147): PL/SQL: ORA-00904: "ITTPRC"."PARTY_KEY_IDENTIFIER"."PARTY_KEY_TYP_NM": invalid identifier
SELECT DISTINCT T_O_PARTY_REQUEST_IDENTIFIER(PR.PRTY_RQST_ID) BULK COLLECT INTO T_T_P_R_CRITERIA
FROM TABLE(CAST(I_T_T_PARTY_REQUEST_CRITERIA AS T_T_PARTY_REQUEST_CRITERIA)) ITTPRC,
PRTY_RQST PR
JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
WHERE (BIAP.BUSN_APPLC_NM = ITTPRC.SYSTEM_IDENTIFER OR ITTPRC.SYSTEM_IDENTIFER = 'ALL' OR ITTPRC.SYSTEM_IDENTIFER IS NULL)
AND (INTPTY.INTN_PROCES_TYP_NM = ITTPRC.PROCESS_TYPE OR ITTPRC.PROCESS_TYPE = 'ALL' OR ITTPRC.PROCESS_TYPE IS NULL)
AND (PR.UPDT_BY = ITTPRC.UPDATED_BY OR ITTPRC.UPDATED_BY = 'ALL' OR ITTPRC.UPDATED_BY IS NULL)
AND (INSTS.INTN_STATS_NM = ITTPRC.STATUS OR ITTPRC.STATUS = 'ALL' OR ITTPRC.STATUS IS NULL)
AND (PR.CHLD_RQST_IND = ITTPRC.CHILD_REQUEST_INDICATOR OR ITTPRC.CHILD_REQUEST_INDICATOR = 'ALL' OR ITTPRC.CHILD_REQUEST_INDICATOR IS NULL)
AND (PR.TRACK_RQST_IND = ITTPRC.TRACKING_REQUEST_INDICATOR OR ITTPRC.TRACKING_REQUEST_INDICATOR = 'ALL' OR ITTPRC.TRACKING_REQUEST_INDICATOR IS NULL)
AND (RQSTYP.RQST_TYP_NM = ITTPRC.REQUEST_TYPE OR ITTPRC.REQUEST_TYPE = 'ALL' OR ITTPRC.REQUEST_TYPE IS NULL)
AND (RQSTYP.RQST_CLASS_NM = ITTPRC.REQUEST_TYPE_CLASS_NAME OR ITTPRC.REQUEST_TYPE_CLASS_NAME = 'ALL' OR ITTPRC.REQUEST_TYPE_CLASS_NAME IS NULL)
-- AND (ITTPRC.PARTY_KEY_IDENTIFIER IS NULL);
-- AND (ITTPRC.ADDTN_IDENTIFIER_INFO IS NULL);
AND (PRKYTP.PRTY_KEY_TYP_NM = ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM IS NULL);
can some one tell is this approach is correct. if not suggest me.

I am passing the value as
(PRKYTP.PRTY_KEY_TYP_NM = ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM OR Here PART_KEY_IDENTIFIER is a Nested table. So you cant join it like that.
Try like this
prkytp.prty_key_typ_nm in (select party_key_typ_nm from table(ittprc.party_key_identifier)) orHere is a example based on EMP table.
I have created following nested table.
SQL> create or replace type my_emp_list as table of number(10)
2 /
Type created.
SQL> create or replace type my_dept_obj as object(deptno number(10), emp_list my_emp_list)
2 /
Type created.
SQL> create or replace type my_dept_tbl as table of my_dept_obj
2 /
Type created.I am going to use the below nested table data in a query to get value from emp table
my_dept_tbl
   my_dept_obj
     10, my_emp_list(1,2,3,4,5)
   my_dept_obj
     20, my_emp_list(6,7,8,9)
)The query would be like this
SQL> select e.*
2    from emp e
3    join table
4         (
5           my_dept_tbl
6           (
7             my_dept_obj
8             (
9               10, my_emp_list(7839,7782)
10             ),
11             my_dept_obj
12             (
13               20, my_emp_list(7566,7369)
14             )
15           )
16         ) t
17      on e.deptno = t.deptno
18     and e.empno in (select column_value from table(t.emp_list))
19 /
     EMPNO ENAME JOB              MGR HIREDATE         SAL        COM     DEPTNO
      7839 KING   PRESIDENT            17-NOV-81       5000          0         10
      7782 CLARK MANAGER         7839 09-JUN-81       2450          0         10
      7566 JONES MANAGER         7839 02-APR-81       2975          0         20
      7369 SMITH CLERK           7902 02-APR-81       2975          0         20
SQL>

Inputs for Gaming?

Similar Messages

Maybe you are looking for