Inquiring minds may find this error code helpful: 0x207

Hopefully I'm asking this in the right forum. I just downloaded the update for Microsoft Remote Desktop for Windows Phone 8.1 (I am actually running Denim on a 1520 but that may not matter). The version is 8.1.8.13 released 3/4/2015. I am trying to connect
to a RemoteApp application but I am receiving the following error message shortly after it tries the redirection process (I think it fails at the securing remote connection part after it attemps the redirction to the RemoteApp application collection server):
Connection error
We couldn't connect to the remote PC. This might be due to an expired password. If this keeps happening, ask your admin or tech support for help.
Inquiring minds may find this error code helpful: 0x207
I am able to connect directly to both the broker server as well as the RemoteApp collection server with this application with the same credentials and am only experiencing this when trying to connect to a RemoteApp application.
We are running Server 2012 R2 for both the broker/web and the collection servers. We are not using a gateway server as we use an SSL VPN concentrator instead for access outside of our network. We have server farms set up as well in the RemoteApp topology.
Any info would help or let me know if I'm not posting in the right forum for this issue. I know this is a very recent release so I'm trying to figure out if I should wait for a bug fix or if there's something that I can do on my end.
Thank you in advance for your time!

Hi Scott,
Please check your configuration once again and the certificate must be well configured. Also for accessing RemoteApp there might be the permission issue for your use, recheck once and verify. You can also got through
this article for information.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Error code 0x884ec692, does anyone know what this error code means?

I came home tonight and found all of the printer lights blinking and "error 0x884ec692" displayed. I have not been able to find this error code on the HP web site or in the forums. I pulled the power for about 20 seconds and it indicates that all is fine now but I ran into this twice last night so I need to figure out what is going on.
Thanks for the help, Tom Davis

What type of printer do you have?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HT1212 tried to restore my iPod, received this error code: 0xE8000065?!! please help thanks

Tired to restore my iPod, but I received this error code: 0xE8000065
Please help
Thanks all

iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

Encore burns to DVD, not Premiere Pro... moving to Encore forum
These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Repeatedly, this error code suddenly appears on the screen and I don't have a clue what it means or what to do: "A script in this movie is causing Adobe Flash Player to run slowly. If it continues to run, your computer may become unresponsive. Do you w

Repeatedly, this error code suddenly appears on the screen and I don't have a clue what it means or what to do: "A script in this movie is causing Adobe Flash Player to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?
No Yes"

Hi,
Some "movies' are actually Flash files.
This means the Flash App will play them (possibly in a browser in some cases).
Depending where this item is and how it is playing it may be effected by other things
A web page can include javascript.
Apple uses javascript here to help with creating the posting box, the Edit options, Adding pics/smilies and the like.
Sometimes the javascript can be what is called a runaway process and gets sort of stuck in an endless loop.
If it is a free standing item then it might be triggered by AppleScript on the Mac. (or be modified in some way)
Again if the Script (normally written with a upper case S) is not perfect it can cause problems.
9:09 pm Wednesday; February 26, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Ran hardware test and found error code 4SNS/1/40000001:YPOR-0.592 ? can't find the signification of this error code

ran hardware test and found error code 4SNS/1/40000001:YPOR-0.592 ? can't find the signification of this error code.

Back atcha!

HT4543 Hi guys, I got this error code when I did my apple hardware test. 4MOT/2/40000004:HDD-1379 does anyone have an idea of what this could mean? Please Help .

Hi guys, I got this error code when I did my apple hardware test. 4MOT/2/40000004:HDD-1379 does anyone have an idea of what this could mean? Please Help .

You can buy and install the hard drive you want to. However, on Late 2009 and newer iMacs the temperature sensor is in the hard drive, so if you replace it with a hard drive that has not got a temperature sensor you will have serious fan problems.
You have got an Early 2009 iMac, so do not worry about this. You can buy a hard drive at OWC > http://eshop.macsales.com/shop/hard-drives/3.5-SerialATA/ Follow these steps > http://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2267+Hard+Drive+Replacement/9 028

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

Hi there can you help with this error code Oxc5d1281

I refilled the HP cartridges in my Photosmart C 7250 All-in-One and put them in and got this error. I have D/C power,etc and it still comes up with this error code. Now what?
Cheers,
British_eh

Hi british_eh
You could try resetting the printer, details here
Note though that the reliability of refills tends not be as good as originals, links below FYI.....
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00853819&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
http://www.qualitylogic.com/2009HPinktest.pdf
Kind Regards, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

I've been having this error code 0x80090318 please help

I've been having this error code 0x80090318 please help

Start by looking to the right on this page under 'More like this'.

Same 4MEM/9/40000000 , but different aka (hopefully) the complete guide to this error code and changing RAM

Hello world,
finally, after having been reading here for years I decided to break silence and join the most venerable Apple discussions community!
First of all, I'm no native speaker, so if I at one point don't express myself correctly, I'm sorry. If you don't understand please ask what exactly I meant since it's very important that we know exactly what each one of us is talking about, thank you.
Important, too:
I know there are a lot of posts with this topic and I sifted through a lot of them but none of them captures exactly what my problem or rather my questions are and unfortunately in a lot of them there is no real feedback from the original poster how it all worked out or not. So, I intend this thread to be that one helpful thread which more or less concentrates the knowledge of the other threads, where people with similar problems can go to in future.
I ask one thing of you: Please DON'T answer with just one phrase à la "U got bad RAM, send it back" or "Contact Apple Customer Support Service whatever thingy" without explaining why this would be the only viable option (because I think it is not, at least at the moment).
All the questions I 'd like answered are green, for you to not lose track. I hope this becomes a good discussion so everyone of us can learn a lot!
Following problem:
Initial situation:
My Computer: MacBookPro 8.2, early 2011, 15", 2,2 GHz i7; Mavericks 10.9.5    (yet without this bash fix but ¯\_(ツ)_/¯ )
       - Upgraded RAM from onboard 4 (2 x 2) GB to the "unofficially" possible 16 (2 x 8) GB
Ordered RAM on Amazon.de with the right Specs: 204 pin DDR3 SO-DIMM (1333 MHz, PC3-10600S, CL9),
Manufacturer: CSX (http://www.csx-memory.com , while it's maybe not the most renown seller, it was described on another website as reliable )
    HERE (hope the link doesn't change):               http://www.amazon.de/gp/product/B0084SH6WA/ref=oh_aui_detailpage_o01_s00?ie=UTF8 &psc=1
       - Installed it, booted Mac without problem, what does System Profiler say? I have full 16 GB   1600 MHz   Memory installed
- Obviously sent me the "wrong" RAM (or can System Profiler be wrong??), funny thing: It works,
     --> after a LOT of research checked here http://guides.macrumors.com/Buying_RAM      my i7 is 2720QM, so supports it, lucky me
   Btw, if i go to About this Mac > more information > memory, the Text there even says it can hold 1600 MHz, has this been written there like this all along?!
- Which RAM do I have installed exactly now? since the sticker on it showed the originally ordered Specs.., moreover how do I determine the CAS latency of my installed RAM?
Crashes:
Didn't really have any, except..... well,
- In some instances Firefox (I think 32.02. or sth., the latest Version at this moment) reproduceably keeps crashing, for example right now, can't even start it, that's why I can't tell you the exact version, maybe I edit that later. Safari so far hasn't crashed.
- Once I had a System Crash, but it happened when I wanted to reboot after updating the firmware of a hooked on external WD drive to be usable again as time machine backup volume under mavericks (without endangering my data).
The RAM seems to work fine; for example when I was doing a long overdue backup of 77GB on said drive, Activity Monitor showed a RAM Usage of 15,99 GB and nothing crashed. Only the fans were powering at some point but i thought that normal..
- Actually produced two more Crashes when trying to run Apple Hardware Test (AHT), the one on the second disc that originally came with my Computer (probably made for OS 10.6.x    x= 6 or sth., don't remember which version my MBP was shipped with), which leads to
Tests:
Memtest86
- I put Memtest86 v.5.01 on a USB Stick and bootet from that and let it test "the whole" RAM
(btw Do you know how you can put the bootable USB image of Memtest only to one (of a few) partition of my 32 GB USB Stick? The instructions (command line stuff) only let me put it on the whole Stick which makes it otherwise useless as a volume; ok here I'm not sure if I'm using the correct technical terms....)
- I let Memtest86 do 3 and a half passes with one pass consisting of 10 different tests, so it took over 8 hours!
--> RESULT:   0   (in words: zero) ERRORS,
--> That is why I think my RAM is ok, because I think (think NB, don't know) Memtest86 does good testing,or do you know      better?
AHT
- After that, out of curiosity, I tried to run AHT from the DVD with said results, then I ran AHT (also called Apple Diagnostics under Mavericks) from the Internet, this worked, but produced the famous 4MEM/9/40000000 Error Code,
first one for example was: 4MEM/9/40000000: 0x8477df98, the last part after the colon is variable, but stays the same in one instance, i.e. if you repeat the AHT directly. If you restart the Computer an rerun the test then it changes, e.g. some other it showed 0x84770a18
- I did the short and the extended version, it took ca. 2-3 and 16 min respectively till producing the Error Code (only 1 at a time)
- Did it 4 times or so; once in short/simple version it showed no error, the rest the 4MEM/9 s.
some example of a simple test, results taken out of the System Profiler Window (fehlgeschlagen= failed):
Apple Diagnostics:
The usual self test on start up is always passed (bestanden), see for example:
What other than bad RAM can 4MEM/9/40000000 mean? I hope there are a few tech and computer savvy people around this place who know what they are talking about and can give me a good answer, or at least help to narrow it down. Actually I also think, the RAM sticks are not loose, but before I screw open my MBP again I would like to explore the other possibilities.
Is it probable that this Error Code has got sth. to do with me installing a) 16 GB of b) 1600 MHz RAM, or maybe with CAS Latency (i don't know the actual CL of this RAM)? and if so, is it only because some Apple Programmer/Developer/Technician wrote some values in a list on the System Level, so it doesn't accept RAM it would normally work with?? If it works fine and is faster, why change it?
Final Words:
I repeat, apart from the Firefox crashes, my Mac seems to be working fine, at least I don't notice anything, (well, that disk utility and System Profiler (or whatever it's called nowadays) sometimes take time to start up is nothing special i think, is it?)
But now I'm scared that perhaps there could be a future danger for my computer I do not foresee...I hope you can at least exclude that.
So I'd rather spend my time starting a discussion here with people who don't have to abide by some corporate policy (right?) than having the hassle of repeatedly screwing my Mac open and shut and doing expensive calls with all the companies involved who won't tell me anything more in depth than "we have to send it there, do more tests and you get it back then".
I hope that this thread won't rot in the wastelands of unanswered posts and that maybe all the people who take part in it learn sth. and all the people seeking help in future will find it here.
Thanks for your patience!
Waiting for your greatly appreciated answers,
MuddyMic
PS: Why is there no category Hardware, Components, RAM or sth similar? Not sure if it fits in Ports and Interfaces so I put it under Using a MBP

Hello world,
finally, after having been reading here for years I decided to break silence and join the most venerable Apple discussions community!
First of all, I'm no native speaker, so if I at one point don't express myself correctly, I'm sorry. If you don't understand please ask what exactly I meant since it's very important that we know exactly what each one of us is talking about, thank you.
Important, too:
I know there are a lot of posts with this topic and I sifted through a lot of them but none of them captures exactly what my problem or rather my questions are and unfortunately in a lot of them there is no real feedback from the original poster how it all worked out or not. So, I intend this thread to be that one helpful thread which more or less concentrates the knowledge of the other threads, where people with similar problems can go to in future.
I ask one thing of you: Please DON'T answer with just one phrase à la "U got bad RAM, send it back" or "Contact Apple Customer Support Service whatever thingy" without explaining why this would be the only viable option (because I think it is not, at least at the moment).
All the questions I 'd like answered are green, for you to not lose track. I hope this becomes a good discussion so everyone of us can learn a lot!
Following problem:
Initial situation:
My Computer: MacBookPro 8.2, early 2011, 15", 2,2 GHz i7; Mavericks 10.9.5    (yet without this bash fix but ¯\_(ツ)_/¯ )
       - Upgraded RAM from onboard 4 (2 x 2) GB to the "unofficially" possible 16 (2 x 8) GB
Ordered RAM on Amazon.de with the right Specs: 204 pin DDR3 SO-DIMM (1333 MHz, PC3-10600S, CL9),
Manufacturer: CSX (http://www.csx-memory.com , while it's maybe not the most renown seller, it was described on another website as reliable )
    HERE (hope the link doesn't change):               http://www.amazon.de/gp/product/B0084SH6WA/ref=oh_aui_detailpage_o01_s00?ie=UTF8 &psc=1
       - Installed it, booted Mac without problem, what does System Profiler say? I have full 16 GB   1600 MHz   Memory installed
- Obviously sent me the "wrong" RAM (or can System Profiler be wrong??), funny thing: It works,
     --> after a LOT of research checked here http://guides.macrumors.com/Buying_RAM      my i7 is 2720QM, so supports it, lucky me
   Btw, if i go to About this Mac > more information > memory, the Text there even says it can hold 1600 MHz, has this been written there like this all along?!
- Which RAM do I have installed exactly now? since the sticker on it showed the originally ordered Specs.., moreover how do I determine the CAS latency of my installed RAM?
Crashes:
Didn't really have any, except..... well,
- In some instances Firefox (I think 32.02. or sth., the latest Version at this moment) reproduceably keeps crashing, for example right now, can't even start it, that's why I can't tell you the exact version, maybe I edit that later. Safari so far hasn't crashed.
- Once I had a System Crash, but it happened when I wanted to reboot after updating the firmware of a hooked on external WD drive to be usable again as time machine backup volume under mavericks (without endangering my data).
The RAM seems to work fine; for example when I was doing a long overdue backup of 77GB on said drive, Activity Monitor showed a RAM Usage of 15,99 GB and nothing crashed. Only the fans were powering at some point but i thought that normal..
- Actually produced two more Crashes when trying to run Apple Hardware Test (AHT), the one on the second disc that originally came with my Computer (probably made for OS 10.6.x    x= 6 or sth., don't remember which version my MBP was shipped with), which leads to
Tests:
Memtest86
- I put Memtest86 v.5.01 on a USB Stick and bootet from that and let it test "the whole" RAM
(btw Do you know how you can put the bootable USB image of Memtest only to one (of a few) partition of my 32 GB USB Stick? The instructions (command line stuff) only let me put it on the whole Stick which makes it otherwise useless as a volume; ok here I'm not sure if I'm using the correct technical terms....)
- I let Memtest86 do 3 and a half passes with one pass consisting of 10 different tests, so it took over 8 hours!
--> RESULT:   0   (in words: zero) ERRORS,
--> That is why I think my RAM is ok, because I think (think NB, don't know) Memtest86 does good testing,or do you know      better?
AHT
- After that, out of curiosity, I tried to run AHT from the DVD with said results, then I ran AHT (also called Apple Diagnostics under Mavericks) from the Internet, this worked, but produced the famous 4MEM/9/40000000 Error Code,
first one for example was: 4MEM/9/40000000: 0x8477df98, the last part after the colon is variable, but stays the same in one instance, i.e. if you repeat the AHT directly. If you restart the Computer an rerun the test then it changes, e.g. some other it showed 0x84770a18
- I did the short and the extended version, it took ca. 2-3 and 16 min respectively till producing the Error Code (only 1 at a time)
- Did it 4 times or so; once in short/simple version it showed no error, the rest the 4MEM/9 s.
some example of a simple test, results taken out of the System Profiler Window (fehlgeschlagen= failed):
Apple Diagnostics:
The usual self test on start up is always passed (bestanden), see for example:
What other than bad RAM can 4MEM/9/40000000 mean? I hope there are a few tech and computer savvy people around this place who know what they are talking about and can give me a good answer, or at least help to narrow it down. Actually I also think, the RAM sticks are not loose, but before I screw open my MBP again I would like to explore the other possibilities.
Is it probable that this Error Code has got sth. to do with me installing a) 16 GB of b) 1600 MHz RAM, or maybe with CAS Latency (i don't know the actual CL of this RAM)? and if so, is it only because some Apple Programmer/Developer/Technician wrote some values in a list on the System Level, so it doesn't accept RAM it would normally work with?? If it works fine and is faster, why change it?
Final Words:
I repeat, apart from the Firefox crashes, my Mac seems to be working fine, at least I don't notice anything, (well, that disk utility and System Profiler (or whatever it's called nowadays) sometimes take time to start up is nothing special i think, is it?)
But now I'm scared that perhaps there could be a future danger for my computer I do not foresee...I hope you can at least exclude that.
So I'd rather spend my time starting a discussion here with people who don't have to abide by some corporate policy (right?) than having the hassle of repeatedly screwing my Mac open and shut and doing expensive calls with all the companies involved who won't tell me anything more in depth than "we have to send it there, do more tests and you get it back then".
I hope that this thread won't rot in the wastelands of unanswered posts and that maybe all the people who take part in it learn sth. and all the people seeking help in future will find it here.
Thanks for your patience!
Waiting for your greatly appreciated answers,
MuddyMic
PS: Why is there no category Hardware, Components, RAM or sth similar? Not sure if it fits in Ports and Interfaces so I put it under Using a MBP

My Photoshop, Illustrator and In design failed to update. I got this :Error Code: U44M1P7. Suggestions to fix?

My Photoshop, Illustrator and In design failed to update. I got this :Error Code: U44M1P7

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

What does this error code mean?

I keep trying to update my regular adobe and I keep getting this error code 1310 it states that I need to verify that I have authority for file C:\config.Msi\PFCICE.tmp file. I assume this may have something to do with my virus suite, but really have no idea on how to fix this. Anyone got any help for me it is driving me crazy!

Please refer : http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html

ERROR CODE HELP

Hello everytime I try tpo restore my Iphone after the new update I keep getting this error code:
A Error occurred while restoring this Iphone (-20)
Itunes could not restore the IPhone (the name) because the backup was corrupt or not compaitable with the I phone that is being restored...
I need all of my things I have no contacts notes or anyting.
Please help.

I'd suggest a clean re-install of iTunes & related applications:
Go into Control Panel > Add/Remove Programs
Remove these applications:
1. Apple Software Update
2. Apple Mobile Device Support
3. iPod for Windows (this may or may not exist, either way, it's not needed so we can remove it)
4. iTunes
5. QuickTime
Restart the computer
Download & Install the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301/
Launch the Utility: Start > Programs > Windows Install Clean Up
Select any of the above mentioned applications, and click Remove
Restart the computer again
Download & install iTunes again from here: http://www.apple.com/itunes/download/
CG

HT203128 "Unable to check for available downloads. The network connection was lost." I have 3 downloads from yesterday that I receive this error code. Any ideas?

I have 3 downloads from yesterday that I receive this error code. Any ideas?
Thank you!

I may have stumbled upon something that could help. A type of "detour" around the problem.
I just started experiencing this problem a few days ago. Anytime I'd try to download a song/video/movie, I would get the message, "Unable to check for available downloads. The network connection was reset".
So, instead of selecting "Check for Available Downloads" under "Advanced" menu...
I logged into "My Account" page in itunes. If there are available downloads it comes up at the top of the page with the option button "Download Now". When I select that -- it downloads immediately.
Can't promise it will work every time. But it's worked for me so far. Good luck...

Inquiring minds may find this error code helpful: 0x207

Similar Messages

Maybe you are looking for