Ins Programm einloggen

Das Programm meldet Testversion abgelaufen. Die Registrierung führt zum Einkauf. Ich habe aber bereits 2012 gekauft und 2013 erneuert.

In iM das Event anwählen
den Clip auswählen
unter Ablage 'Datum und Uhrzeit des Clips anpassen'
=> der clip wird in ein neues Event mit diesem Zeitstempel gepackt
//English: How to change the time-stamp of a clip?//

Similar Messages

PSE 3.0 - Fotos mit Audioanhang von Camera herunterladen

Hallo,
arbeite seit ca. 2 Monaten mit PS Elements 3.0 und lade damit Fotos von meiner Canon Powershot G 3 ins Programm. Das Herunterladen der Fotos klappt, allerdings wird mit dem Fotolader von Elements 3.0 der Audioanhang von der Camera nicht mit herunter geladen.
Verwende ich das Canon-eigene Programm ZoomBrowser, dann werden die Audiodaten mit den Fotos auf die Festplatte übertragen und können auch von PSE 3.0 angezeigt und angehört werden. Warum klappt das Herunterladen der Audiodaten gemeinsam mit den Fotos durch das Programm Photoshop Elements 3.0 nicht?? Falls jemand Rat weiß, bitte Email an [email protected]
Danke. Helmut

Hallo,
Du sprichst mir aus der Seele.
Dieses Verhalten nervt mich auch jedes mal, wenn ich ein Bild bearbeite.
Obwohl ich schon alles Settings und Doku durchforstet habe, habe ich bisher keine Abhilfe gefunden.
Die einzige Lösugn scheint zu sein, äußerst sensibel mit der Maus zu agieren ...
Gruß, Matthias

Auflösung von pdf-Objekten in MS Word

Hallo
ich möchte in MS Word (2007) pdfs als Objekt einbetten, erhalte dabei aber beim Ausdrucken eine nur sehr schlechte Auflösung. Einstellungen unter "Objekt formatieren" (ist wohl eigentlich für Bilder) erzielen keine Abhilfe und werden nicht permanent gespeichert. Irgend eine Idee zur Abhilfe? thx & ng - Thomas

Excel-Tabellen kann man native in Word einfügen über die Tabellenwerkzeuge und Text mit Syntaxhighlighting kann man unter Umständen durch abgreifen der CSS-Datei und Verwendung der Debug-Fenster in Browsern importieren und dabei die formatierung erhalten. ansonsten hat Willi natürlich recht - Word ist kein Layout-Tool. Selbst wenn du die Grafiken als Pixelbilder einfügst, wirst du hier und da Probleme haben. Ansosnten ist das auch wurscht wegen der Dateigröße - Word bettet immer alle Daten redundant in das Dokument ein. CMYK-Bilder als TIFF, RGB Bilder in älteren Word-Versionen als BMP, in neueren als PNG oder JPEG native. Es ist daher völlig unerheblich, in welchen Formaten die Pixel ins Programm kommen - du machst nix gut, nur weil PDFs komprimiert sind.
Mylenium

Aps funktionieren nicht

Hallo,
ich habe mir gestern ein Studentenabo geholt. Davor hatte ich eine Testversion. Jetzt wo ich das Abo habe kann ich Photoshop oder Indesign nicht öffnen bzw. die Icones erscheinen gar nicht bei mir auf den Laptop, so dass ich sie anklicken kann und ins Programm gelange. Im creative cloud center habe ich die versionen alle auf den neusten Stand aktualisiert... unter Programm im Ordner finde ich auch nix über Photoshop oder indesign...was soll ich tun?

Cleaner laufen lassen, neu installieren:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

The Firefoks without any plug-ins - 220 mb !!!! It is not normal for good programm!!!

The Firefoks without any plug-ins - 220 mb !!!! It is not normal for good programm!!! I`d like to see the 10-20 Mb in the Task Manager. It is normal for good browser. How i can decide this problem? Every plug-ins in the OFF position.

hello, this is a very normal value for a modern browser. it is impossible to reduce the memory footprint ten-fold as you'd like it...
in independent tests firefox has generally been found to be the lightest browser in regards to memory usage among the major competitors: http://lifehacker.com/browser-speed-tests/

Um ein PDF in ein Word zu konvertieren muss ich mich jedesmal bei Adobe online anmelden, ist es nicht möglich gleich das Programm zu installieren, damit ich mich nicht jedes Mal einloggen muss?

um ein PDF in ein Word zu konvertieren muss ich mich jedesmal bei Adobe online anmelden, ist es nicht möglich gleich das Programm zu installieren, damit ich mich nicht jedes Mal einloggen muss?

Hallo,
um doch noch zu einer Lösung zu kommen schlage ich vor, dass Sie sich an den Support - evtl. auch per Chat - wenden und den Leuten von Adobe vortragen. Wir hier sind "nur" Anwender, die versuchen zu helfen, wir sind jedenfalls keine Adobe-Angestellten.
Eine andere Möglichkeit wäre noch ein Eintrag in das sog. Feature Request/Bug Report Form, hier der Link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform (nur englischsprachig).
Hans-Günter
P.S. Witzig finde ich, dass Sie Ihre Antwort als "Correct Answer" markiert haben.

Kein Einloggen ins Wifi-Netz mehr möglich nach Update auf 5.1.1 auf iPhone 4

Einwählversuche ins Wifi scheitern aufgrund eines falschen Paßwortes.
Andere Geräte (auch ein IPad3) wählen sich weiterhin automatisch mit dem nie geänderten Paßwort ein.
Google zeigt extrem viele Leidensgenossen mit ähnlichen Problemen.
Weiß jemand Rat.
Gruß

Schon seltsam. Es scheint einen Admin zu geben, der an einem Sonntag Abend Beiträge zensiert, aber bisher habe ich nicht einen Lenovo Support-Mitarbeiter gesehen, der sich für diese unzähligen Probleme interessiert. Ganz besonders, die kritischen Lücken in der Verschlüsselung und die fehlenden Sicherheitsupdates sind völlig indiskutabel. Nach dem Desaster mit Lenovos """"""Business"""" ThinkPad Tablet hätte ich eigentlich klüger sein und die die Finger von dem Gerät lassen sollen. Genau die selbe Situation hatte ich damals mit diesem 700 € (inkl. Tastaturdock für saftige 80€) und übermäßig schweren Boliden. Das Gerät hatte so gar nichts was den Namen Thinkpad verdiente. Der Support war mieß, die Qualität war unterirdisch und wenn mal doch ein völlig verspätetes Update für Android kam, war sie ungetestet und fehlerhaft. Der Kunde wurde einfach im Stich gelassen. Ich hatte gehoft, dass sich das inzwischen geändert hat. Aber naja, ein Drittes Mal passiert mir das nicht mehr. Hinter den großen Reden den Mobilmarkt aufzuräumen und Nummer 1 zu werden scheint wohl rein gar nichts zu stecken. Ich sehe hier weder die Kompetenz noch die Qualität um das jemals erreichen zu können.

I have a dilema i use a programme called Mackeeper i accidentally moved several files to my trash,i would like to put the files back where they belong but put back option is in grey and wont work??

I have a dilema i use a programme called Mackeeper i accidentally moved several checked files to my trash BUT i didnt delete them,i would like to put the files back where they belong but the put back option is in grey and wont work?? i have spoken to Apple and to no avail !!!
Mackeeper moved my files to my trash so i pulled them out of my trash to my desktop it has copied them to my desktop as well as kept them in my trash!!
im so confused and things are not working properly anymore such as my google chrome for example...all my book marks are gone BUT i can go to the google file which is out of place on my desktop and view all my bookmarks data...ALL of my files still exist but they are just out of place now which is making it hard for certain options on my computer to work...
the files includeAccounts,address book plug-ins,addressbook,Adobe,AIM,Alfred,Anquet Maps,Apple,Asramsoftware,Audio,Automatically add to itunes,facebook,facebook 15-53-13-329,faxfresh,five details,flipping book photo album, font collections, fonts, forismatic,Garageband,Gimp,Google,Google 15-53-13-344,icloud,icons,idocument lite,ilife media browser,ilifepage layout,internet plug-ins,ip scanner,itext express,itunes,iweb,Keyboard layouts,Keychains,launch agents,Librarian,limit point software,logs,mail,mail 15-53-13-895,messages,metadata,mobile documents,mobiscope,moso,movie effects,mozilla,MPlayerx,mywebcamBroadcaster,Native instruments,Skype and LOADS more......
HOW do i get this stuff back to where it is supposed to go so that these programmes work properly again???? i also used delete and command but that did not work either,like i said i have not emptied my trash and ALL the info is there its just totally out of place and the put back option will not work sor some reason!!??? im running 10.8.5 imac someone PLEASE help me!!
i have not set up time machine either but i do back up to a site called backupblaze...

Step 1
Remove "MacKeeper" as follows.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
Failure to remove MacKeeper will result from neglecting any one of these points:
Quit MacKeeper before dragging it to the Trash.
Don't empty the Trash after dragging the application to it. Let MacKeeper delete itself.
Don't try to drag the MacKeeper icon in the Dock to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.
Step 2
Restore from the last backup that predates the unwanted changes.

I used a third party programme called Mackeeper UGHHH,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??how can i manually put these files back where they belong?SO upset!!

I used a third party programme called Mackeeper UGHHH SOOO Stupid i know,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??and will not work even when i highlight one by one!!
how can i manually put these files back where they belong?
i know i should have used time machine but i have not set it up and its too late for that now
i have been researching and racking my brain on how to put these folders and contents of them back to where they once were all of the contents of the folder are still in tact AND i have not emptied my trash,my programmes and some of my apps are not working properly now...i use my computer alot for making music and things are jumbled up now...
is there anyone out there who knows the answer to my prayers on how to go about putting these folders/files back to where they came from to restore functionality to my mac..Yes and thank u if u were going to tell me i HAVE un installed mackeeper...A very sad and upset Mac user!! Cheers Shane

hello there thank u so much for ur reply!! ok i uninstalled mackeeper now and the put back option is still in grey im so confused...i tried restarting my computer like u said and put back still in grey??!! the files that are in my trash are everything from Accounts,address book plug-ins,address book,adobe,aim.........then stuff like apple,Audio,....to caches color pickers,colors,com.apple.TCC,to DVD player to facebook,google to ilifemedia browser to itunes to keychains to movie effects,preferences printers to skype...my Native instruments files BUT not all of them my garage band but not all of it...it seriously looks like my whole library is in the trash i tried to put things back where i THINK they belong and it just added the item or folder under where i thought it went and didnt restore functionality to for instance google chrome and all my book marks are there....they seem to be only certain things from my library that would have added some functionality to apps and programmes like my garageband is missing stuff photobooth wont work so on.......kinda looks a bit like this thats only the half of it!! Cheers shane!!!

Help with data mining add ins-excel 2010

I've wasted hours of my life now trying to figure out how to establish a connection on the data mining add in on excel 2010. I have installed and re-installed the microsoft sql server 2012 express multiple times and don't understand what it takes
to get this to work...Do I need SQL server and why? Do I need to download the adventureworks data file and why? (For some reason I was able to download it properly on my first sql server install, but when I went to work the data mining connection it
said the SQL browser must be connected...What???...I thought it was connected...there are no instructions on how that is fixed...Now I have reinstalled sql 2012 but can't download adventureworks...it says it can't
establish a connection...I am beyond the point of frustration)...I'm not a developer or know anything about code/programming, so a lot of the lingo is way over my head anyway when I am searching for troubleshooting solutions...I just want to be able to use
this feature in excel and it is upsetting me that I can't get it to work. I have followed step by step instructions, watched youtube videos, etc...nothing doing...If anyone can help me it would be greatly appreciated. Thanks.

>I'm not a developer or know anything about code/programming,
You have two choices:
1. Hire a programmer type to assist you
2. Become a programmer
BOL: Data Mining Add-ins
Instead of Express, consider purchasing SQL Server 2012 Developer Edition:
http://www.amazon.com/SQL-Server-Developer-Edition-2012/dp/B007RFXQAM/ref=sr_1_1?s=software&ie=UTF8&qid=1397437432&sr=1-1&keywords=sql+server+2012+developer+edition
Install it.
Download AdventureWorks2012 and AdventureWorksDW2012 sample databases and install them.
Desirable (but not for beginner): install Adventure Works Cube. This is how it looks after installation:
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

HELP.. illustrator cs6 is not working.... missing plug ins???

Hi, HELP!!!! I have an issue with my illustrator cs6 version as when I am trying to open work which I have worked on, on my computer it is now saying that I have missing plug ins, PDF???? and will not let me open anything??? PLEASE can you help, I am mid way thorugh a project and need to work on the programme now... thank you so much for all your help..

restart your computer.
if that doesn't solve the problem, re-install illustrator over your current installation.

Topaz plug ins. Which program to run topaz in?

Lightroom vs photoshop. I've never used plug ins in the past. Purchase completed several weeks ago but can't decide where to download. Is it possible to use in more than one program? Yes, I posted to topaz forum without answer so I'm back at Adobe!

I'm pretty sure you can, but you have to download separate versions of each Topaz programme. That said, I don't believe you cannot use Remask plugin in Lightroom. It needs layers apparently.
As I remember, I also had to download and install a programme called Topaz Fusion Express 2, before installing anything into Lightroom. This is the bucket that all the other Topaz bits are loaded into, and which appears when you click on Photo/Edit In on the Lr menu bar. It opens up a further drop down from which you can make a choice of installed Topaz modules.
Once you have installed all you want in Lightroom; open up the second lot of (duplicate) Topaz downloads and choose Ps or PsCC as your programme of choice and they will appear in the Filter dropdown.
Hope this helps. its some time since I went through the Topaz rigmarole.

What is business add-ins and business transaction events

Dear All,
Would you mind tell me what it sht business add-ins and business transaction events ?
i still not understand about this after i read the training material
Regards
Luke

Hi LukeWong ,
BAdi:
SAP Business Add-Ins (BAdIs) are one of the most important technologies used to adapt SAP software to specific requirements. BAdIs were introduced with Release 4.6 and replace function module exits. This technology is not limited to SAP applications. BAdI calls can be integrated in customer applications. These can then be enhanced by other customer applications. In the various SAP applications, BAdI calls are implemented at places where enhancements are appropriate.Business add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits, two different views are available:
· In the definition view, an application programmer defines exit points in a source that allow specific industry sectors, partners, and customers to attach additional coding to standard SAP source code, without having to modify the original object.
· In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard solution, if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, country-specific versions, industry solutions, partner, customer, and so on). You can create definitions and implementations of Business Add-Ins at any level of the system landscape.SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
The enhancement technique is set up in such a way that it is possible to define interfaces for ABAP soure code, screens, GUI interfaces, and tables. These allow customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently. BADI/UserExists are used to enhance R/3 For customer Needs.
Actually there is no transaction to find when and where the BADI
is called.
1. You can see the BADI description to find why it is called.
2. Once you implemented and activated the BADI, put some break points
in the BADI and see "where else used" option to check in what all
programs this BADI is called. In the ITS debug, when you are doing
the operation what exactly the BADI description tells, it will take
to the break points and you have to do manually debug the whole thing.
I know its bit difficult to do manual debug the whole thing, it
takes lot of time, but you have to be very patience when you are
dealing with BADI's.
Transaction SE18 is the BADI equivalent of transaction SMOD
Transaction SE19 is the BADI equivalent of transaction CMOD .
To find the BADI to be implemented and then implement this via SE19.
These steps should enable you to find any BADI related to any transaction in a matter of minutes.
Procedure 1:
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a breakpoint there.
4) Now open a new session.
5) Go to your transaction. 6) At that time, it will stop this function.
7) Double click on the function field EXIT_NAME.
8) That will give you name of the BADI that is provided in your transaction.
Business Add-Ins
Procedure 2:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
4) Now Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
Check this blogs 2 find a BADI:
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
Business Transaction Events
Business Transaction Events (Open FI) The Open FI enhancement technique was developed in the Financial Accounting component. Open FI is based upon the following principles: Application developers must define their interface in a function module, an assignment table is read in the accompanying (generated) code, and the customer modules assigned are called dynamically. This technique differentiates between enhancements that are only allowed to have one implementation and enhancements that can call multiple implementations in any sequence desired. Both industry-specific and country-specific enhancements may be defined.
SAP business transaction events are one type of customer enhancements provided by SAP! We can access the business transaction events using FIBF.Next we have to find the process interface for duplicate invoice check!
check this blog for details on SAP business transaction events
Business Transaction Events
http://fuller.mit.edu/user_exits/business_transaction_event.htm
FI Enhancement Technique How-To-Guide on the Usage of Business Transaction Events (BTE)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Creation of Events via Business Transaction Events
http://help.sap.com/saphelp_nw04/helpdata/en/3b/7f3e8be57c11d1951f0000e82dec10/content.htm
In SAP R/3 you must activate the business transaction events (BTEs) for Availability Check Using SAP R/3. To set this indicator in SAP R/3:........
http://help.sap.com/saphelp_crm40/helpdata/en/b6/de3efc6bbcdc4b948d466857a10323/content.htm
cheers!
gyanaraj
****Pls reward points if u find this helpful

Third party plug ins-anyone know how to use?

hello all
i just bought garritan personal orchestral and want to use it with logic express. has anyone had experience with using third party plug ins in logic. ive tried moving folders and files around but i cant get logic to recognise the programme. i used to use traktion as software which had a search system for locationg plug-ins but logic seems to have no such feature.
any help would be greatly appreciated
cheers
j

It sounds like you have a PPC version of Kontakt Player. This works as standalone but not in Logic.
Run Logic AU manager to see if it is recognised.
Remember in all these issues, and setting up the pi in Logic, you are Looking for Kontakt Plaer 2, not Garritan Personal Orchestra.
If not you need to update Kontakt Player. This is a Native Instruments Application and can be updated either by
1. Running Service Centre if it installed when you installed Garitan. It is a separate Application.
2. Go to NI web site http://www.native-instruments.com/index.php?id=updates_us&flash=7 and update there.
The current version of Kontakt Player 2 is 2.2.1.010

Problem with corrupted Iphoto libary thanks to "cleaning programmes"

Problem description:
Iphoto library is corrupted, showing images as exclamation mark. Have recently used CleanMyMac, and suspect that is the problem. I have now tried to delete these cleaning programmes, but not sure I have completely succeeded? Also; what do I do next in order to restore my Iphoto library?
I read previous comments regarding the same problem, and run the Etresoft programme, and see that I still have some issues with MacPaw/CleanMyMac. So my questions are:
1) How do I get completely rid of MacPaw/CleanMyMac?
2) How do I go about fixing my iphoto library, which was the original problem?
( I am not able to understand the information provided below, so if there are any other areas of concern, please advise me!)
EtreCheck version: 2.0.11 (98)
Report generated 3. desember 2014 kl. 10.29.10 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.33 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:5:47
Disk Information: ℹ️
Hitachi HDE721010SLA330 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (25.43 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
PIONEER DVD-RW DVRTS09
USB Information: ℹ️
Apple Inc. Built-in iSight
LaCie LaCie Device 500,11 GB
S.M.A.R.T. Status: Verified
LaCie (disk1s1) /Volumes/LaCie : 500.11 GB (492.73 GB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.epson.Epusp.plist Support
[running] com.epson.epw.agent.plist Support
[invalid?] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[invalid?] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.akamai.single-user-client.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items: ℹ️
Jottacloud Program (/Applications/Jotta.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Evernote Web Clipper
3rd Party Preference Panes: ℹ️
Flash Player Support
Akamai NetSession Preferences Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 973.91 GB
Destinations:
(my name) Time Cap [Network]
Total size: 998.06 GB
Total number of backups: 1
Oldest backup: 2013-02-28 17:16:31 +0000
Last backup: 2013-02-28 17:16:31 +0000
Size of backup disk: Too small
Backup size 998.06 GB < (Disk used 973.91 GB X 3)
Elements [Local]
Total size: 2.00 TB
Total number of backups: 14
Oldest backup: 2013-07-16 08:56:46 +0000
Last backup: 2014-10-20 10:56:43 +0000
Size of backup disk: Too small
Backup size 2.00 TB < (Disk used 973.91 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      0% fontd
      0% AppleSpell
      0% askpermissiond
Top Processes by Memory: ℹ️
125 MB com.apple.WebKit.WebContent
107 MB Safari
99 MB Finder
94 MB Pages
73 MB mds_stores
Virtual Memory Information: ℹ️
866 MB Free RAM
1.92 GB Active RAM
961 MB Inactive RAM
543 MB Wired RAM
1.97 GB Page-ins
90 KB Page-outs

When you installed the Trial of Clean My Mac 2, there should have been an uninstaller in the installer bundle. Check, if there is the uninstaller, then run this application.
If there is no uninstaller, download and install "FindAnyFile" and search for files with CleanMyMac2. in the name. You can reveal the files that are found in the Fnder and delete them this way. Download it here: http://apps.tempel.org/FindAnyFile/index.php
To recover your iPhoto Library:
Make copy of the library as it now on an external drive.
Then use your Time Machine backup to restore the iPhoto library from a date before you cleaned the library. If you let CleanMyMac 2 remove duplicates, it will have deleted original image files and replaced them edited versions, and these links may be incorrect. It is hard to fix this manually. Restoring from your backup will be the best solution.

Ins Programm einloggen

Similar Messages

Maybe you are looking for