Insance Caging and Resource Manager Plan

I want to test the instance caging feature of oracle 11g database on Solaris Sparc 64-bit O.S. I have configured two rac dbs on a server which has 2 processors.
Now, i want to use over-provisioning technique for that CPU_COUNT is already set as 2 on both the rac databases. Now my concern is, i want to see how much cpu every instance is using.
Kindly suggest me some guide line for this.
Thanks and regards,
Kazmi

Hi kazmi,
Oracle Enterprise Manager 11g introduces more flexible alternatives to server partitioning to support resource management. Instance caging allows you to limit CPU count per instance and enables resource management that has more consistent support across operating systems compared to resource managers available in many operating systems. It also has lower administration overhead than traditional virtualization techniques.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Similar Messages

Sys_group and resource manager

Hello.
How much CPU % and at which level should I allocate to SYS_GROUP consumer group?
1. Should I allocate 100% CPU to SYS_GROUP at level 1 and distribute CPU at level 2 to users
2. Should I not mention SYS_GROUP in resource plan?

In setting up a resource manager plan it is very important that you set the system DBA's in the highest priority group for situations where it is needed the most. If your database started to get hung due to extensive queries and you as the DBA want to go in and diagnose or monitor the database then you wouldn't want your diagnostic queries to wait for CPU allocation. If you are not in the higher group and all the machine resources are busy then even login to the database could take a lot of time yet alone trying to diagnose or kill any query.
It is also important that if you set these accounts to the top most group then you should write very efficient SQL's to monitor your database (if you aren't using any standard product such as Enterprise Manager). Otherwise such could cause impact on the business queries.
Now the question regarding how much to assign them - it all depends on your business requirements. You have to design your own resource management as per the business objectives. In some situations people configure them as follows:
Level 1 - CPU 100% other directives UNLIMITED. Consumers SYS, SYSTEM, any other SYSDBA accounts and accounts like SYSMAN, DBSNMP
Level 2 - CPU 100% other directives either UNLIMITED or CONSTRAINEd. Consumers all other accounts in the database.
Or you can further split the users between Level 2 till last available level.
IF you don't mention the SYS_GROUP in your plan it will be categorized by Oracle as OTHER_GROUPS and will be given the least priority.
Edited by: syedleo on 12/07/2009 21:32

Project Management and Resource Management Reporting Views

I am wondering if anyone would have and is willing to share some documentation they may have put together around reporting views related to Project Management and Resource Management modules. We are installing the projects suite and I have never done custom reporting out of these modules and would be interested in feedback or documentation anyone may have related to these or any offer of assistance or direction in designing the reporting views.
Thank you in advance!
Matt

hello Tony,
What I can say. Maybe you should use SAP PPM as a operational Project Management tool and integrate it with WBS elements and projects in SAP PS. Probably it will be the best solution for you.
The second way is to use a second project structure for project management as you wrote, with different number of this project. So you will have 2 structures one for actual posting of costs and the second for rest management needs and statistical posting of costs. Probably you will need CO substitution for posting of costs to post costs on these 2 structures.
There will be many other conditions to get right solution but I think this 2 ways are possible.
Adam

Sap wm task and resource management configuration

Hello Experts,
Can somebody give me configuration steps of "Task and Resource Mangement", Its urgent.
Thanks in anticipation.
Regards,
Hari.

Hi Hari Krishna,
I am also in need of the configuration steps of "Task and Resource Management", Will plz arrange.
Thanks in advance
Sai Krishna

Activate the TRM (Task and Resource Management)

Could you tell me where to activate the TRM (Task and Resource Management) in WM?

Hi Stefanie,
First, you create the TRM site in:
SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
You can assign your TRM site to you warehouse number here:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
Then, you continue with the rest of TRM customizing work.
Hope this will be helpful for you.

TRM (Task and resource management) extractor

Hi people!!
I would like to know, if is there some
TRM extractor for sap bw, or what could be
the procces to load TRM information in BW.
Regards!

Hi Stefanie,
First, you create the TRM site in:
SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
You can assign your TRM site to you warehouse number here:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
Then, you continue with the rest of TRM customizing work.
Hope this will be helpful for you.

What is Setting Resource Manager plan SCHEDULER[]:DEFAULT_MAINTENANCE_PLAN

"Setting Resource Manager plan SCHEDULER[]:DEFAULT_MAINTENANCE_PLAN "
1. I would like to know what is this.
2. How to disable this message from alert ?
Please provide your comments or doc for this subject.
Thanks,

References:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/dbrm005.htm
http://www.dba-oracle.com/job_scheduling/resource_manager_plan.htm
http://oradbpedia.com/wiki/Oracle_11g_Resource_Manager_Changes
Regards,
Venki

RAC and Resource Manager

I want to assign different plans to each node in a RAC.
Is this possible?
Thanks

Yes; you can create more services which map to different sets of instances in your RAC.
So instead of a 1:1 mapping between services and databases, you create multiple services on the one (RAC) database. Then assign different resource plans to those services.
See
http://www.oracle.com/pls/db102/ranked?word=resource+manager&partno=b14197
for an overview of the topics in the RAC documentation.
Cheers,
Colin

Command Line and Resource Manager

When using the command line to compile a Robohelp project, is there a way to update the shared resources within the project before generation?
For example, say you have Project1 and it is using snippet1 in that project. However, snippet1 has been modified in the resource manager (just say, for argument's sake, that snippet1 is also used in Project2, and you modified the snippet there and synced it to the resource manager). When you do a regular command line compile, the snippet is not updated.
Is there a way to sync the snippets and images from the resource manager in the project before doing the command line compile (other than opening the project and syncing manually)? After all, if I have to open the project, there's no reason to command line compile since I'm already there and can just compile it from the project.
Thanks!

I don't think that is possible as, correct me if I am wrong, even within RoboHelp the images don't get updated automatically. It's something you have to do.
It's a good point though so I suggest submitting a feature request.
The more people who request a feature, the more likely it is to be actioned. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Task and resource management - Task confirmation from supervisor

Hello,
we are implementing TRM. We would to like give to th supervisor the possibility to confirm task using monitor. This can be useful in case of downtime of mobile devices.
Currently it's possibile to confirm from the alert monitor only the tasks with status force confirmation (status = 7). In this case from a WM pont of view the picking is already cofirmed and through monitor it's possibile to confirm the task and so the putaway from WM point view
So we need to develop a functionality that confirm task indipendently from the TRM status and WM status..
I found the function LTSK_TASK_CONFIRM but it seems that doesn't work.
Have you any suggestions for the functionality or sample code to launch the function module LTSK_TASK_CONFIRM?
i think it's very strange that SAP hasn't developed a method in order to confirm a task and then TO without using mobile device.
Regards,
Andrea

Hi Andrea,
Why don't you just use tcode LP00? You will log on to your device/resource element as if you are logging on to a scanner. This tcode then simulates the scanner screens on your SAP terminal and you can confirm all tasks as per correct scanning functionality.
Cheers,
Hein

Task and resource management wihout HU

Hello everybody,
i'm trying to customize the TRN module but i have a doubt...
Is it possibile to use TRM without using HU? . I work in a storage location not HU managed.
Thank you very much for your replies.
Regards,
A.

Hi Andrea,
Yes .. it is possible ..
I am just learning TRM and I have just created a prototype without HU .. only with SU.
Regards,
Benito

Task and Resource Management

HI SAP GURUS
I have created a Transfer Order with 4 line items for 4 different materials. And I have created 4 tasks with reference to the same TO in TRM Monitor. System is generated same group reference number for all tasks. Now how to assign this group reference number to a warehouse resource (worker) to create a task bundle?
Thanks inadvance,
Siva
Edited by: siva.T on Aug 4, 2010 11:11 PM

Hi Siva,
Can you Resolve my Problem,
While i am going to TRM Monitor to Create Task, There i am not getting any Inbound Delivery or Transfer Order.
Can you tell me the answer...
Thanks,
Mukesh

Task and Resource Management (TRM) - Replenishment/picking process

Hello everybody,
i need your help. We are implementing TRM module and we are facing issues with replenishment/picking process. We have storage location not HU Managed and wee have the necessity to create task bundle for picking/replenishment process.
Every times TRM make a bundle, it seems that force to execute a pick&pack
Regarding picking process when TRM creates a bundle it forces to specifiy a destination HU that will be inserted in the delivery as handling unit. So in this case we have no problem.
But in the replenishment process we haven't a delivery and so the standard avoid the insertion of HU.
The questions is:
1) Is possibile to have bundle without pick and pack? .
Thank you very much for your attention.
Regards,
Andrea

Hi James,
we haven't pick HU. I think that pick HU is only possibile for storage location HU managed. Our replenishment process foresees:
1) Make a bundle of picking from different source bins until
2) Make a bundle of putatway to different destination bins
So in we are facing two main problems that are driving us crazy:
1) The bundle in TRM works only in the pick and pack scenario. So in our warehouse replenishment (LP22) it doesn't work. A solution could be to make a cluster of task but it's not possibile to managed it in a system guided way. Maybe we have solved this problem by forcing HU numbers in the standard fields even if don't exist at IM or WM level. It's a dirty solution, i know.
2) Other problem is to manage a pick and drop. Operator could executed the picking bundle and then leave the mixed pallet in a drop-off point. Next an other operator has to scan the serial number of mixed pallet and put each material to a different bin.
Stantdard system can create only one task with the mixed pallet composed to the final destination while we have the necessity ti have n task.
I don't know if it's clear and someone could helps us in order to implement the scenario described above.
Other problems is that it seems impossible to develop custom functionalities in TRM because frequently the next step in the Logical transaction is harcoded in the standard code
Bye Bye,
Andrea

Task and resource management without HU and SU

Hi experts,
I know that it is possible to use TRM with SU and without HU.
Is it possibile to use TRM without HU and SU?
Thanks in advance
Regards
M.

Hi,
Welcome you post on the SAP Business One Integration Technology forum. However, this may not be the proper forum for you. This forum is dedicated to SAP Business One. Please close your thread and post on a proper forum.
Thanks,
Gordon

Resource Manager and Images

Hi,
I upgraded to RH9 (from RHX5) and very happily started to use both the Snippet and Resource Manager functionality.
I seem to have hit a mental block despite reading the help and looking up this forum regarding updating images in the resource manager .....
I have multiple projects and the same image is used throughout the projects - sometimes only once in a project and sometimes multiple times in the same project.
Lets say this image is called Picture1.gif - due to program re-design I now need to update Picture1.gif.
Picture1.gif is stored in Resource Manager and as it is linked then a copy is also stored in my project.
I delete the old image, create a new image, rename it to the original name Picture1.gif and drag it to Shared Resources and then drag it back again so that it is linked.
Despite the back and forth steps this does in fact work - the image is updated in other projects as expected.
However, if an image appears in a project multiple times then I have to change it everywhere before I can rename it, etc. etc.
I feel quite sure that I am missing something here and that the whole process should be simpler!!
I would have expected somehow to be able to update the image in the resource manger and then sync.
TIA
Morven

Hi Morven
In my own experience, it really shouldn't matter where you update the image, as the Resource Manager is a two way street. If you update in RoboHelp, it should be sensed and the updated image copied from your project to replace and update the centralized image. And likewise, if you update the centralized image, Resource Manager should update your project to match the updated centralized image.
Again, I woudn't want to first delete the image followed by saving a new one using the same name. I would either open one of them (centralized or project) and edit as needed. Or edit a copy, make edits, then save using the same file name so the existing image is replaced.
To the best of my knowledge, Resource Manager should sense the change as the date/time stamp should be different as well as possibly the size. Then the automation should kick in to update the image's counterpart and synchronize everything nicely. The only fly in this ointment would be if the new image were different in size from the pixel measurement standpoint. If the new image is wider or taller or narrower or shorter, you would need to ensure that you reset the sizes in your project so they match the new dimensions. Otherwise they will be a bit skewed and have the fun house effect. I believe RoboHelp supplies a script for this.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Insance Caging and Resource Manager Plan

Similar Messages

Maybe you are looking for