Insane error message makes browsing impossible

I am a habitual visitor at a gaming website (http://www.worldofwar.net/) for World of Warcraft users. Lately I'm getting an error message which makes browsing this site impossible. A big message comes on the screen: WARNING THIS SITE MAY HARM YOUR COMPUTER. Now I know that the site is very popular and well-managed and any malware that might creep on to it is dealt with immediately. I know the administrators have very high standards in what they allow on the site.
Now in order to make that error message go away I have to click "Ignore Warning" and then I get ANOTHER error box and have to click "Continue." Only then do I get to where I"m going. This happens EVERY TIME I click a link in the site's forum pages and every time I go back a page. It says this a system set up by Google and if you click some of the Google links you'll find that the site hasn't been found to be infected FOR MONTHS. This system is out of control. How is it that Google can take over my browser and make visiting a site impossible? What right do they have to do that? I have NEVER encountered this kind of interference and I have been to some pretty sleazy sites in my time.
Is there a Safari setting that will turn off this insane error message? To what extent is Safari responsible for this? Would it do any good to complain to Google? Even if there was malware on a site, my Mac probably wouldn't be affected. How can Safari permit such a takeover by another company?

I hope in the next version of Safari to see an "accepted site" setting which overrides the warning mechanism for specific web sites.
Send feedback to Apple via the Safari Menu>Report Bugs to Apple setting.

Similar Messages

Fidelity active trader give me an error message your browser is not supported. Can you fix.

I use active trader pro and have an error message that browser is not supported in when I do research and some other areas.
How can I fix this is there an up grade?

hello kmore, you'd have to contact fidelity's support about that issue...

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

Error Message Makes Navigating or Saving Impossible

the problem basically is that photoshop has locked up completely with a few exceptions. I can scroll through my document, though i can't click on anything, menu bar included without prompting an error about a misnamed path. this makes it impossible to navigate my way out. key commands also seem completely ineffective.
don't want to loose my work and i can't find a way out of it. i suspect that the actual path renaming window is behind the actual main window but i can't access or move it without being turned away by the error message.
thankyou.
(i apologize, i recently posted this issue moments prior but was advised to reformat my query)

the error reads: "A path with that name already exists. Please choose a different name.", and appears whenever any part of the main window or menu-bar is clicked on. i can still somewhat navigate through some of the floating toolbars, though not all.

After Showing ERROR message make the field editable in subscreen.

Hello Experts,
I have a requirment where i have added a subscreen to the standard screen of ME31K for creating the contract. In my Subcreen i have my custom screen fields that i'm updating in EKKO table through include structure.
Now if user forget to fill the details in my custom fields in the subscreen then i'm giving the error message prompting the user to fill the value in fields.
But the problem is the screen is locked there itself i want to make the field editable so that user can enter some value in the fields. I can not use the stuatus or information message here because doing this i will get the item overview screen which should not come as i want to restrict the user to header details only and fill all the custom fields.
Please provide me with your helpful responses.
Thnaks,
Naveen

Hi Naveen,
Sorry for the delay.
The code which I gave for popup, i hope its being shown in an IF . . . ENDIF.
So in that condition u can add the following :
IF < ur condition >
   < Call message FMs >
    SET SCREEN SY-DYNNR.   "this would set screen to current screen which is 0201
    EXIT.
ENDIF.
Other than this if you like you can set some parameters in the PAI of this screen which redirect to current screen based on some conditions.
So u can manually set OK-CODE and CALFCODE as SPACE, but i dont know how much this can impact the process.
So please follow the above code.
This is available in
Main Program     SAPMM06E
Source code of   MM06EF0F_FCODE_CALL
IF OK-CODE EQ SPACE AND
   CALFCODE EQ SPACE.
SET SCREEN SY-DYNNR.
EXIT.
ENDIF.
Hope this helps.
Regards,
Ateet

Script Error Message When Browsing Pages With Contribute

My client is getting the following message when browsing their site .
The site has been functioning for many years and has just started to show this message today (see attached screen shot below), an error has occurred in the script on this page.
As far as I can tell the site has not been modified in any way in recent days and there is no mention of 'MM_swapimage' in the code at the location referenced in the message.

Thanks Anit,
The web address is www.thormining.com
Here is a screen shot.

Flash Player error messages from browser?

Hello.
So a client I'm building assorted things for gets these annoying error dialog boxes popping up in web pages that I never see myself. But they are akin to those I would see if I were running a SWF locally from my hard drive in my Flash Player. I've tested for these errors repeatedly on different servers and different computers and am coming to the conclusion that there is something peculiar about the way their Flash Player in their browser(s) is configured. Have they somehow installed a debug mode of Flash Player? Have they turned on some annoying verbose mode? If so how do I tell them how to turn it off so that they can realize that the way things look in their office are not remotely representative of the way Flash is rendering things on 95% of the computers in the world (and 100% of the computers I have tested things on)?
Thanks for your time.

I have searched through every book, forum, and found nothing
on suppressing Flash Player error messages from the browser. If
it's really not possible, this is terrible news. It's nice to think
that we'd encapsulate everything in try catch methods, but come
on....

Suppress Flash Player Error Messages from Browser?

I'm well aware of try catch functions, but in general is
there a simple setting to suppress browsers from displaying
stackTraces on errors?

I have searched through every book, forum, and found nothing
on suppressing Flash Player error messages from the browser. If
it's really not possible, this is terrible news. It's nice to think
that we'd encapsulate everything in try catch methods, but come
on....

Upgrade to 9.0.1 last am now the browser will not connect, shows its working , now error message, other browser works, whats the fix?

firefox is working but does not operate. Other browsers work so its an issue with the upgrade. No error message. what do I do?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Authentication Failed error message on browser while login to author instance

Hi,
I ran backup on author and publish instance after datastore garbage collector.
It went fine on publish instance and created backup file succesfully.
But at some point of time backup failed on author instance and we tried to login on author instance we got cq5 console on browser.
After that we checked replication agent on author and wheni clicked to publish we got error page saying Class not found exception.
after some time we just bounced the author instance we got startup completed message ver quickly and not started all the bundles(started only 121 bundles).
Tried to login author instance on browser it was showing Authentication Failed message.
Please helpout in resolving this issue.
Thanks in Advance.
Mahesh

I did not really understand what the problem with the domain/hostname or so is you mentioned but lets set it aside and assume that it doesnt cause any further problems for now.
About your questions:
1) With which user do you try to login?
"amadmin" is default name for the administrative user.
Did you rename him or do you try to log in with another user?
"amadmin" is probably the only user which "works" just after installing.
When you go to portal/dt, are you logged in or are you on the anonymous desktop? If you did not make any changes you shold get either a login channel or a Userinfo channel.
This way you should be able to see if you are logged in.
Also important for you:
Logfiles for access manager and portal are by default placed in the folder /var/opt/SUNWam/. There is a debug and logs folder.
These loggings are most of the time more helpfull than the directory server logs.
To get a finer logging edit the file /etc/opt/SUNWam/AMConfig.properties
There is a line "...=error". Replace error with message and restart the webserver/appserver-domain.
hth Chris

E71 - Error Message on Startup - "Impossible to co...

Advice apprecated - the following occurs now on every startup - and this began after I recently updated firmware and used PC Suite to restore all to phone and memory cards
After switching on there is message "Installation in Progress" then "Impossible to complete installation from memory card" - go to Applications"
This is more annoying than really problematic, but I would appreciate advice on how to fix this
David

Samething happened to me. Try going to the Application Manager, and look at each file that has a little memory card logo to the right. Delete anything you deem unessessary (for me, I installed all Themes on the mem card) and see if that fixes the startup error.
Others have suggested this method:
"1. Connect your phone in the data mode via cable (as a memory card reader).
2. Make sure you can display all files (Tools | Folder Options | View... in MS Windows).
3. Make the Private folder unhidden (mark it and go File | Properties | Hidden | No in MS Windows).
4. Search for *.SIS files there.
E.g. in mine they were in \Private\10202dce
The instructions I found said to delete all the SIS files here, but they looked like the original install files of some of the useful programs to me, except for one.
Not sure how it got there, or what it was, but I deleted a file called '200159d0.sis' from the above directory, and all now appears to be okay."
Good luck and let us know if you fix it!

When trying to burn files to a DVD (DVD RDL from Memorex) an error message appears saying: Impossible to burn the disk because communication failed between disk player and computer (error code 0x80020022)

When trying to burn files (1,7 GB) to a Memorex DVD, an error messge says: Impossible to burn the disk because communication between disk player and computer failed (error code # 0x80020022).
Is the Memorex incompatible with my i-Mac or what could it be ?
My i-Mac is a 21", Core 2 Duo with 3.06 GHz. RAM is 8Go 1067MHz DDR3.
Thanks.

That message is usually caused by poor media. i.e. poor coating quality.
Mermorex is generally regarded by most users here as poor quality media. So is TDK. Most of us prefer Verbatim, Fuji, Maxell or Taiyu Yuden DVD-R.
Also burn at only 2x or 4x burn speed.

An error message 'your browser doesn't support iFrames' appears when I play a game on Facebook & doesn't load.

I don't have that problem on any other game, just on Frontierville, Facebook. If I refresh the page over & over for a long time it eventually loads. I've had this problem for two weeks.

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Error message after recording and running Action In PS CS3

I have recorded an action to create a transparent image on a batch of photos. Next I ran the image processor using the File/Scripts/image processor. When running the action the error message occurs no matter how many ways I attempt to modify the action. Error: The object "Style "Shape Style"" is not currently available.
I then look in the action window to check and under the steps Make Fill Layer: Style: Shape, Style 1 appears but I can't delete it.
This one error message makes it impossible for me to image process a batch of photos with a watermark on them.
Thank You In Advance for your Help.
SPE

can you save them into a new action set then save that?
ex. create a new set, icon bottom of action palette, then create a new action in that set, then save that set via the flyout menu in the action palette and save action set
what i'm getting at is maybe you have the action palette file locked.
the main file is called "Actions Palette.psp" and lives in: C:\Documents and Settings\YOUR_USER_NAME_HERE\Application Data\Adobe\Adobe Photoshop CS3\Adobe Photoshop CS3 Settings
make sure you have full access to that folder.
another thing to maybe try... copy out that whole folder to a new location. then delete everything in it. then restart photoshop. then try to save the action again. at worst you can always copy the old files back in, at best, you'll clear out a disturbing error...

Slow script message crome:/browser/content/tab browser./xml:537

why does script run slow causing freeze error message crome:/browser/content/tab browser. xml:537 this happens mostly on facebook when trying to play games , farmville, or cityville system is windows vista

Please try the steps on this page: [[Troubleshooting extensions and themes]]
If that doesn't help, please let us know and we'll try to figure out something else.

Insane error message makes browsing impossible

Similar Messages

Maybe you are looking for