Insane memory useage after reducing prefetch and superfetch
It worked like a charm on my ACER. Reduced perfetch and superfetch and now it boots fast and it runs faster and more stable. It boots with 204Mb memory in use!
I tried it on my X61T which booted at 937Mb.
After reducing superfetch from level 3 to 2, it increased to 1.1Gb.
Then I reduced prefetch from level 3 to 1. It increased to 1.37Gb.
If I look into Sysinternals processes explorer I can only find ~700Mb allocated.
Of which is 286Mb McAfee! The ACER runs ESET which does ~80Mb.
If I boot up I also have a problem with a crashing logmon.exe.
Any tips?
De Groenten
Martin
Quote from: Fredrik Åsenius on 30-October-07, 00:39:50
That isn't the PSU you need, even if it comes in gold or silver or chrome.
With some certainty all the problems you list can be put down to the weak PSU.
Can you find and afford this one?
http://www.dustinhome.se/DacsaPortal/?ProdID=5010099774
Are you serious? I need more power than what I have to fire up just the motherboard with absolutely nothing else attached? How much current is truly necessary to fire up this CPU? The existing PSU worked just fine with the 3000+, 3 HDs, and two DVD burners, so I question the need for even more current just to fire up the new CPU by itself. Most of the discussions I've seen focus on the +12V rail(s), so I would like to know how much current is needed to get this bugger up and running. Is the 4A difference between my existing PSU and the one you are recommending going to make that much of a difference? I've seen the signs of overstressed power supplies in the past, including the reluctance to fire the system up as well as a buzzing noise from within the PSU, but I'm not seeing anything of that nature with my existing setup.
The unit you are recommending seems quite nice, but is about three times more than I was planning to spend on a PSU. The appearance of a power supply means nothing to me, as I prefer to have the machine sealed up and quiet and out of the way, and therefore I tend to stay away from those fancy units with the gold plating and internal lights and other gimmicks.
Similar Messages
-
I ahve a ipod touch of first generation model no.=MC540ll and i want to update my IOS of my ipod to 6.1.5 it requires 2 GB to start i want to know that after instillation the memory will be reduced or not?
A model MC540ll is a 4G iPod and can go to iOS 6.1.5.
Updating via wifi (settings>General>Software Update requires about 2.4 GB of storage available. After the update all but maybe 50 MB will be returned to for use. iOS 6 takes up only a little more that iOS 5 but the excess storage space is needed to perform the update.
If you update via iTunes yo do not need exces storage space -
In CS6, why the file size remains same after croping? And how do I reduce the size after each croping? Thx
Select the Crop Tool and check the box [ ] Delete Cropped Pixels and you should see a reduction in file size. With the box unchecked, the data is still maintained in the document, you just can't see it.
-Noel -
I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?
Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd) -
New ipod has erased all memory twice after trying to upload new songs
new ipod has erased all memory twice after uploading new songs - has asked me to register the ipod 14 times - each time I have completed the registration, it gets halfway through uploading 668 songs from my itunes library and then stops - now the folder icon has appeared on the ipod and it won't respond at all - very frustrating - please help
hey,
i've had my ipod since december, i had to restart my computer and after installin everythin back i'm having the same problem ! i'm currently trying to upload the songs for the fourth time, cause this morning when i tried to reset it wouldn't even let me ...
please, anyone ???
60 gb video Windows XP Pro -
ORA-27101: shared memory realm does not exist and ORA-01139: RESETLOGS
HI ALL,
After the oracle has installed on a solaries server successfully, i am unable to login into oracle database.
Below are the errors messages :
1) ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
2) Media recovery complete.
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery.
and When i try to login into oracle as root .
this is the error :
sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Feb 12 15:52:49 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ld.so.1: oracle: fatal: libskgxp10.so: open failed: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
my Operating system details :
SunOS Blade3-Chassis2 5.10 Generic_142900-03 sun4v sparc SUNW,Netra-CP3060
Anyone please help me here. waiting for your reply.
Below are the ORACLE_SID Details :
1) echo $ORACLE_SID ----- > ems
2)ps -eaf | grep smon -------> ora_smon_ems
do you need any data?
Edited by: user8959150 on Feb 11, 2010 7:19 PMHi
We mostly receive this error message ( ORA-27101: shared memory realm does not exist and ORA-01139)
When our SGA_MAX_SIZE is greater than 1.7 G.b on
You again configure your sga size
and sga_max_size paramete will not greater than 1.7 G.b
Hope your database will work correctly.
for test purpose you set all your init.ora parameter
db_cache_size=512m
db_keep_cache_size=64m
db_recycle_cache_size=16m
java_pool_size=8m
large_pool_size=16m
shared_pool_size=256m
shared_pool_reserved_size=64m
sga_max_size=1600m
sga_max_size will not be grater than combination of of db_cache_size db_keep_cache_size,db_recycle_cache_sizejava_pool_size+share_pool_size+share_pool_reserved_size
Hope it will work fine.
Regard
Abdul Hameed Malik
[email protected] -
DNS after reducing the advertised EDNS UDP packet size to 512 octets
hello
There is something wrong with my DNS server, it open internet webs so slow,and i have no idea with this .
04-Mar-2011 14:31:57.264 zone 0.0.127.in-addr.arpa/IN/com.apple.ServerAdmin.DNS.public: loaded serial 1997022700
04-Mar-2011 14:31:57.264 zone 15.0.168.192.in-addr.arpa/IN/com.apple.ServerAdmin.DNS.public: loaded serial 2011030204
04-Mar-2011 14:31:57.265 zone ******/IN/com.apple.ServerAdmin.DNS.public: loaded serial 2011030404
04-Mar-2011 14:31:57.265 zone localhost/IN/com.apple.ServerAdmin.DNS.public: loaded serial 42
04-Mar-2011 14:31:57.265 running
04-Mar-2011 14:32:00.066 host unreachable resolving 'b.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:7fd::1#53
04-Mar-2011 14:32:00.261 host unreachable resolving 'r.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:500:2f::f#53
04-Mar-2011 14:32:00.261 host unreachable resolving 'r.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:503:c27::2:30#53
04-Mar-2011 14:32:00.261 host unreachable resolving 'r.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:503:ba3e::2:30#53
04-Mar-2011 14:32:00.261 host unreachable resolving 'r.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:7fd::1#53
04-Mar-2011 14:32:00.261 host unreachable resolving 'r.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:dc3::35#53
04-Mar-2011 14:32:00.361 host unreachable resolving 'dr.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:500:1::803f:235#53
04-Mar-2011 14:32:00.361 host unreachable resolving 'dr.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:7fd::1#53
04-Mar-2011 14:32:00.361 host unreachable resolving 'dr.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:dc3::35#53
04-Mar-2011 14:32:00.361 host unreachable resolving 'dr.dns-sd.udp.0.0.168.192.in-addr.arpa/PTR/IN': 2001:503:ba3e::2:30#53
04-Mar-2011 14:32:00.866 host unreachable resolving './NS/IN': 2001:7fd::1#53
04-Mar-2011 14:32:01.005 success resolving './NS' (in '.'?) after reducing the advertised EDNS UDP packet size to 512 octets
04-Mar-2011 14:32:01.408 success resolving 'local/SOA' (in '.'?) after disabling EDNS
04-Mar-2011 14:32:01.533 host unreachable resolving 't.arin.net/AAAA/IN': 2001:503:ba3e::2:30#53
04-Mar-2011 14:32:01.534 host unreachable resolving 'v.arin.net/AAAA/IN': 2001:500:1::803f:235#53
04-Mar-2011 14:32:01.534 host unreachable resolving 'v.arin.net/AAAA/IN': 2001:7fd::1#53
04-Mar-2011 14:32:01.534 host unreachable resolving 'v.arin.net/AAAA/IN': 2001:503:ba3e::2:30#53
04-Mar-2011 14:32:01.534 host unreachable resolving 'w.arin.net/A/IN': 2001:500:1::803f:235#53
anyone help!! Thanks a lot.
Message was edited by: leo.xuealso interesting, when setting DNS servers IPs in Network Settings for your host,
it is important that the IPs are not doubled.
in example if you have Networksettings like
automatic DHCP given from router or server.
IP-Adress: 192.168.2.2
Subnetmask: 255.255.255.0
Router IP: 192.168.2.1
DNS-Server: 127.0.0.1, 192.168.2.2
wich means localhost and again same machine, just different IP..
then your lookup mechanism has to walk thru this steps to know if there is nothing inside to resolve adresses.
which means in this example it would take double the time if DNS-Server would be just 127.0.0.1
you can see if there is a lot to work thru in your logs.
look for something like "sizing zone task pool based on 9 zones".
this mount of zones will change if you set the correct DNS server IP.
more zones are slower than less, very logical!
but this will not solve your problem with packet size at all, it just reduces circles after dns resolves not known adresses even with packet size change. -
I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
2% WindowServer
0% Speedy
0% SystemUIServer
0% RealPlayer Downloader Agent
0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist -
High memory utilization after few days - ciscoworks LMS 4.0.1
Hello,
I have the problem that our ciscoworks server gets out of memory after few days. The memory utilization is always getting higher an higher (above 95%). Sometimes it is only after 3 days and sometimes it is after 1 week. So it happens not regulary. Has anyone an idea what could be the problem? I have made an screenshot from the services which use a lot of memory. And at this time the memory utilization is getting higher and higher again....I think there is a problem with tomcat or dbsrv10.exe, there are also a lot of cwjava.exe running.
Kindly regards
David MayerHello,
I have the same problem. First time I've tried to upgrade memory from 8gb to 16gb but I am still experiencing same issues (Memory is running on 98%). I'm not sure exactly what process it is causing this issue, because when I've checked all proccesses from all users running on this server and count them there is no 15 gb at all. My guess is the same for tomcat server which is responsible for RME collector, or correct me if I'm wrong.
Do you have any idea what can cause this problem.
I've tried to upgrade then to Cisco works Prime lan management 4.1, but server went with same issues.
Thanks a lot -
Erase memory stick after import
I have a sony DSC-P10 camera and have noticed that if I check the box to erase files from the memory stick after import, the pictures are erases but still seem to be taking up space on the stick. I had to reformat the memory stick to get the space back.
Is there something I can tweak in iPhoto? If I have to erase the memory stick manually it is no big deal, I just wondered if I am missing a trick here?
MikeMike,
I don't know anything about your memory stick, but I can ell you from personal experience and from other's experiences here to NOT have iPhoto or even Image Capture to erase your memory stick.
Thins can go wrong in the download process and there is a chance you can lose the images on the computer and on the card if you have it automatically erased.
Lori -
How do I check MAIL memory useage ON IPAD?
How do I check MAIL memory useage ON IPAD
Do you mean in terms of storage ? If so then you can't see it separately for the Mail app, it's included in the 'Other' category which shows at the bottom of the Summary tab when connected to your computer's iTunes - along with notes, calendar info, contacts and the contents of third-party apps.
-
Delete session after error 023 and WP has reached abap/heaplimit = 40000000
Hello,
I had upgraded my system's kernel to 7.21 401 last weekend and started getting below errors.
"Delete session after error 023" and "WP has reached abap/heaplimit = 40000000"
When I change the abap/heaplimit parameter to 6000000000 program runs without error.
This parameter value is out of max value of this parameter.
I donot want to give the parameter over max allowed value.
I also changed dbsl patch to 7.21 418 but no solution.
I searched through sap notes and scn but could not find an answer to my problem.
What could be the relation between kernel upgrade and this parameter?
Why the program was working with Kernel 7.21 316 and not working with 7.21 401?
I inserted SM21 and developer trace file below.
Can you help about the issue, please?
Thanks and Regards,
Yuksel AKCINAR
SM21:
11:56:52 DIA 010 200 USER1 TX01 R4 7 Delete session 004 after error 023
dev_wx:
L Fri Mar 13 11:52:31 2015
L EVTSDL: Begin of FORM PROCESS_EVENT_TRIGGERED_JOBS
L EVTSDL: Event raised: SAP_END_OF_JOB
L EVTSDL: Event parameters: SLCA_LCK_SYNCHOWNERS 10523100
L EVTSDL: Begin of FORM SELECT_EVENT_TRIGGERED_JOBS
L EVTSDL: Eventhistory > There are no active profiles of criteria type 'EVTHIS'
L EVTSDL: End of FORM SELECT_EVENT_TRIGGERED_JOBS
L EVTSDL: End of FORM PROCESS_EVENT_TRIGGERED_JOBS
L TIMESDL: CLEANUP_MUTEX try to grasp for server:
L TIMESDL: arq01_ARQ_10
L TIMESDL: CLEANUP_MUTEX not grasped (is busy)
A
A Fri Mar 13 11:56:35 2015
A WP has reached abap/heaplimit = 40000000 bytes
A
A Fri Mar 13 11:56:39 2015
A SelMemClass: heap quota (DIA) exceeded 2000000000 2000030480
A
A Fri Mar 13 11:56:40 2015
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
C Call to DbSlRollback96 while DBIF already active in DbSlExeRead96
B ***LOG BZY=> unexpected return code 1 calling DbSlRollback [dbcon 3820]
B ***LOG BYJ=> database function ROLLBACK for connection R/3 failed [dbcon 3823]
B *** ERROR => DISTRIBUTED_TA_FAILED:
[dbcon.c 2029]
B {root-id=0050569300301EE4B2AC40086FE743BF}_{conn-id=00000000000000000000000000000000}_0
B 00: name=R/3, con_id=000000000, state=ACTIVE , tx=NO , bc=NO , hc=NO , perm=YES, reco=NO , info=NO ,
B timeout=000, con_max=255, con_opt=255, occ=NO , prog=
M ***LOG R39=> ThIRollBack, db_rollback ( 016384) [thxxhead.c 14956]
M in_ThErrHandle: 1
M *** ERROR => ThIRollBack: db_rollback (step 4, th_errno 18, action 2, level 1) [thxxhead.c 11560]
M {root-id=0050569300301EE4B2AC40086FE743BF}_{conn-id=00000000000000000000000000000000}_0Hi Yuksel ,
From the trace file it seems it is a parallel processing Jobs . Has anything changed ( In terms of number of parallel background work process ) in this Job .
If this relates to only one job dont think this increased memory could be because of the kernel patching .
The only thing i could think of is the following ( 1713986 - Installation of kernel 721 (EXT) ) - The note is valid for 721 als
5.6 Dynamic work processes (NetWeaver 7.00/7.01)
The 720 and 721 kernel versions support the dynamic increase of the number of work processes at runtime. However, this function is not fully compatible with NW 7.00 and NW 7.01. To prevent errors from occurring, deactivate it by setting the following parameters:
rdisp/wp_no_restricted = 0
rdisp/configurable_wp_no = 0
rdisp/dynamic_wp_check = FALSE
rdisp/wp_max_no = Sum of:( rdisp/wp_no_dia + rdisp/wp_no_vb2 + rdisp/wp_no_btc + rdisp/wp_no_vb + rdisp/wp_no_spo + rdisp/wp_no_enq ).
Mind that rdisp/wp_max_no has the default value DEFAULT, which will add two unwanted dynamic processes if not set the number of configured, classical wp types.
Check the parameters and try again after a restart .
Believe have seen in many projects functional consultants complaining the issue is after the patch upgrade . Does this fall in that category
Thanks ,
Manu -
My Imac recently gives a message "you need to restart your computer" after logging out and clicking "sleep". After a few seconds, gray screeen will roll down and give that messasge. I disconnected USB cable from my printer. Today, after turning it on, the log in screen showed then after 2 seconds the gray screen rolled down again and prompted "you need to restart the computer". I've read the apple communities about kernel panics but to no success. I have a 10.6.8, 2.7 ghz, 4GB. This is the error that showed which I reported to apple mutiple times already.
Panics Since Last Report: 4
Anonymous UUID: 522B583E-D9D7-463D-B57E-6849A69E41D9
Wed Jan 22 11:52:33 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f80e2750d, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000001e0, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x000000000000000a, RBX: 0x00000000000001e0, RCX: 0x0000000001000000, RDX: 0x0000000000000000
RSP: 0xffffff805e413eb0, RBP: 0xffffff805e413f10, RSI: 0x00000000000000dd, RDI: 0xffffff800b3eb7e0
R8: 0x0000000000000003, R9: 0x0000000000000001, R10: 0x0000000000000007, R11: 0x0000000000000051
R12: 0x000000000000000a, R13: 0xffffff804aa59004, R14: 0xffffff800d15f1b4, R15: 0x0000000000000000
RFL: 0x0000000000010202, RIP: 0xffffff7f80e2750d, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e413b50 : 0xffffff8000204d15
0xffffff805e413c50 : 0xffffff80002d1208
0xffffff805e413da0 : 0xffffff80002e3f4a
0xffffff805e413db0 : 0xffffff7f80e2750d
0xffffff805e413f10 : 0xffffff7f80e7f7d3
0xffffff805e413f30 : 0xffffff800053e46d
0xffffff805e413f60 : 0xffffff8000285b66
0xffffff805e413fa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AirPort.Atheros9388(426.35.3)@0xffffff7f80e1c000->0xffffff7f80 f66fff
dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80804000
dependency: com.apple.iokit.IO80211Family(320.1)@0xffffff7f80df7000
dependency: com.apple.iokit.IONetworkingFamily(1.10)@0xffffff7f80ddd000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 4614091555750
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.5 (addr 0xffffff7f80969000, size 0x65536) - last unloaded 128892379106
loaded kexts:
com.apple.filesystems.afpfs 9.7.1 - last loaded 1016854024083
com.apple.nke.asp_tcp 5.0
com.apple.filesystems.smbfs 1.6.7
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.0.8f3
com.apple.kext.ATIFramebuffer 6.4.2
com.apple.driver.AppleIntelHDGraphics 6.4.2
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleHDA 2.0.8f3
com.apple.ATIRadeonX3000 6.4.2
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AirPort.Atheros9388 426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.48
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.4.2
com.apple.driver.AppleBluetoothMultitouch 54.3
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.9
com.apple.iokit.IOAHCIBlockStorage 1.6.6
com.apple.driver.AppleFWOHCI 4.7.7
com.apple.driver.AppleUSBHub 4.2.5
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBEHCI 4.2.6
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 2.0.8f3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleBluetoothHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.iokit.IOFireWireIP 2.0.4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.8f3
com.apple.iokit.IOHDAFamily 2.0.8f3
com.apple.driver.ApplePolicyControl 3.0.17
com.apple.driver.AppleGraphicsControl 3.0.17
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.2
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleThunderboltEDMSink 1.1.3
com.apple.driver.AppleThunderboltEDMSource 1.1.3
com.apple.kext.ATI6000Controller 6.4.2
com.apple.kext.ATISupport 6.4.2
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.AppleThunderboltDPOutAdapter 1.5.9
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.9
com.apple.iokit.IOUSBHIDDriver 4.2.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.9
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.9
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.driver.AppleUSBMergeNub 4.2.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOFireWireFamily 4.2.7
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.2.6
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.3.0
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 2.7 GHz, 4 GB, SMC 1.72f1
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 0 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 3
What is going on with this error?It hasn't been acting up since I:
1) Since I unplug my all in one printer with wifi (Hewlett Packard). I barely use the printer and it keeps cleaning out the jets and wasting my **** ink. Plus it'll do a loud self test @ 3:00 in the morning & by this time, I pulled my baseball bat from under the bed and ready to smash some skulls in the office room thinking its a burglar.
But seriously it stop doing it.
This is a late reply but confirmed after 7 months.
Note: I shut down instead of sleep my Imac now because I hardly use it. -
Photoshop keeps on getting out of memory error after installing Premier Pro
I just upgrade my CS to CC. Yesterday I installed Photoshop and did my work without any problem but today after installing Premier and After Effect, I keep on getting out of memory error when I'm working even though I don't have any other application running accept photoshop alone. The file I'm working on is a small file, iphone plus size interface. Basically I can open the file, add blur effect and try to type text I will get photoshop telling me that my system is out of memory. Restarting photoshop give the same problem, restarting my computer give the same problem, ie do one thing and next will give memory not enough.
I don't think my system is slow as it is workstation with dual processor and 12 gig of ram, windows 7 64bits 1gb dedicated memory for graphic card.
I uninstall Premier and After Effect and suddenly the problem go away. Photoshop work as per normal. I didn't have the time to reinstall premier again but will try to do it tonight or tomorrow
Anyone experience such problem before?When you get that error leaver the error showing and use something the can show you how much free disk space there is left on Photoshop scratch disk. It may be a problem with scratch storage space not ram storage space. I see Photoshop use much more scratch space the ram. I have seen Photoshop using less than 10GB of ram on my machine leaving 30GB of free ram on my system unused while using over 100GB of scratch space.
-
Adjust memory pool after application launched
Hi, all
Is it possible to change memory pool after application launched? For example, in command line 'javaw -Xms32m -Xmx64m' and I want to double it after launched. If it is possible, how can I do that?
Thanks,
Vincent ChenYou cannot change the limits once the JVM is running.
Maybe you can use Runtime.exec() to start a new JVM with higher limits?
Maybe you are looking for
-
FICO multiple transactions confusion....
Hello Guys, I am basically atechnical person. Just jumped to SAP functional. There are some transactions in FICO which does the same job so why do we have different versions of it. For example as follows: Incoming payments: F-06 F-28 F-52 Outgoing pa
-
All, Hi, my name is hoss and I am a newby for itunes and would like to organise my Itunes. In Itunes I have two the same albums of which number 1 to 6 is on one album and 7 to 13 is on the second. I would like to join them so I have only one album wi
-
Can Acro X Pro do "wildcard" Boolean searches for multiple PDF's in a folder? Eg: find every date not 05/06/2012?
-
Captive runtime -target bundle does not create the package fails after creating a .tmp folder
Hi Adobe Team, Experts, I cannot create a captive runtime package successfully on windows. This is the command I am using to create a captive runtime package for windows adt -package -keystore CodeSigning.pfx -storetype pkcs12 -storepass password -ta
-
Buffer Tuning in ST02 Recommendations
I am looking for some advice as to how to change tune my buffers in our application servers. Their current settings are based off of SAPs, pre go-live checks. But to me they seem to need some adjusting. Our server has 8GBs of RAM, so I feel like