Insane Object BDHP+58EBC, and +58DD4. Please help?
I have tried the suggestions in the KB "What is an Insane Object Error Mean and What Should I do?", but they did not clear my error. My vi functions normally, but I am concerned that this error may cause a "booby-trap" to be lurking in my distributed application, that may show up at a later date as a crash, or worse. The vi is 4 meg plus in size, so I REALLY have no desire to start from scratch!
Any suggestions??
Thanks
Dave
Well copying the code to a new blank VI didn't work for me (and it also would have unlocked my state diagram anyways). What _did_ work was to create a copy of the VI, and delete chunks and save until the error went away. I managed to get lucky (with some deduction) and find the offending wires. Is there no way of giving us more information than the heap offset? (Is there any way to use this number to find the offending object?)
The insane object error started appearing for me when I edited an enum type def that was used all over the place. The offending wires were wired from a constant of this type def.
Jaegen
Similar Messages
-
Insane object BDHP +828B4 {graphics} (0x80):Front Panel Terminal (Term)
HEllo!
In my vi appears several erros messages like this
insane object BDHP +828B4.....front panel terminal or wire segment.....
I don't know why it appears.
I'm looking for a solution and i thin there are two ways:
-copy to a new block diagrama all this one. But my vi is so big and this is a problem.
-There is another solution in this way:
close labview
put LVdebugkey=TRUE on Labview.ini
open vi
press CTRL+SHIFT+d, the press CRTL+SHIFT+h
then it appears a list box
The problem is that i don't find the LVdebugKey in Labview.ini...where is it??
Anfd when i press CTRL+SHIFT+d, the press CRTL+SHIFT+h nothing appears.
Where can i find this debug key and which is the right way to solve this problem without copying to another VI.
Thanks!!
LarsonOk, the correct way is like this:
1) Close LabVIEW
2) Put the key "LVdebugkeys=True"in the LabVIEW.ini file
3) Open your VI
4) Press CTRL+SHFT+d, then press CTRL+SHFT+h This will turn on an object browser.
5) In the top left list box, select the element that contains the name of your VI and the letters BDHP
6) In the top right listbox, find the line that begins with the error number
7) Click on the F button
8) Delete this object and recreate it. It will ususally be a wire.
But whwn i arribe to the point number 7 i click the F button and all the block diagram disappear....all is clear and the scroll bars are disappeared too.
What i have to do??
P.S:i've saved a copy from the original VI
Thanks
Larson -
my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible
i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!! -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
I lost my ipad and i need the serial number and IMEI , please help me how?
i lost my ipad and i need the serial number and IMEI , please help me how?
If you have registered your device, you can go to https://supportprofile.apple.com/ and log into your apple id. Your devices appear there with serial numbers.
Additionally, your serial number is included on the original receipt when purchased at any Apple Online or Apple Retail store, or any Authorized Apple Reseller. -
Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!
- Try here:
iOS: Device not recognized in iTunes for Windows
- Next try a different computer to help determine if you have a computer or iPod problem. -
I have an old version of InDesign CS5, have not used in a while..about a year. It will not load nor allow me to uninstall and reinstall, please help. I have original discs and serial number. How can I fix this?
CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
-
Have Windows 7 LapTop, Before my restore my Iphone-4 worked like a champ... Now it won't start Itunes when Plugged in Via USB cable, tried Two in Fact
Won't Start I tunes, so i Manually opened I tunes and still No recognition of I phone in ITunes even after reinstall, manual start of mobile service stopping and starting mobile services, restarting the phone and computer, Please Help If Possible......Thankshttp://support.apple.com/kb/TS1538
-
I would like to keep all my Music and photos on my mac but only top rated music and certain photos on my iPad and iPhone how do i stop iCloud from sending all to iPad and iPhone
please help
Regards
Steve DaveyIf you manually manage the device the you can remove the content from the PC after you have put it on the device. However this isn't the recommended way. At some point you'll probably need to restore it which involves wiping all the data. If you don't have all this data to hand then you'll have to try to recover it from a now problematic device first. It's much easier to sync with your library - yes you have two copies, but that's not a waste, it is prudent. As long as you have two copies you can afford to lose one knowing you have a backup. In practice I keep a complete backup of my library, in addition to the subsets of it that I can put on my devices.
tt2 -
I have latest firefox on my desktop and laptop, was working very well since threee years. Sudenlly has stop working both on my desktop and laptop. please help me.
Hello becky81464
If you were able to load websites until you updated Firefox, your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) is likely preventing Firefox from connecting to the Internet, see [http://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet firewalls]
see also : [https://support.mozilla.org/en-US/kb/configure-windows-firewall-allow-firefox-access Configure Windows Firewall to allow Firefox access to the Internet ]
thank you -
I am Hamza of Iraq as possible understand me, bought the iPhone from the owner of the device user and I do not know him and have worked formate device to show white screen and please me to activate the device via email and password Please help me I am po
You need the Apple ID and password that was originally used to set up the device. Ask the seller to give it to you. If the seller is unable or unwilling to provide the information, the Phone is probably stolen. There is nothing you can do.
-
Hello buy one gift card for buy music ann looking right now option to say gift card and my account and nothing please help thanks :)
You question is not clear...
Perhaps these links will help...
iTunes Gift Options
http://support.apple.com/kb/HT2736
How to Redeem a Code
http://support.apple.com/kb/ht1574 -
I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work
This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.
-
Hi! I cant conect The face time betwen my iPad ,iPod and iPhone, please help me,what i need for this issue?
What is it doing when you try to facetime? also if you are using the same apple Id/email on each device, it wont work.
-
TS3694 cannot restore forgot password and id please help?
cannot restore ipod, forgot password and id please help
thank youYou'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock
Maybe you are looking for
-
Unable to communicate with printer-hp deskjet 1000
I have used this Printer for almost 2 yrs and dis problem ne'er occoured before........forst my text print came distorted then it showed offline and later its says printer is ready but when i give the print command......it says "unable to communicate
-
I keep getting error 2324 when upgrading to version 10
I keep error 2324 when upgrading to version 10. Running win 7
-
I am still learning how to use EJB 3.0s completely. I have found that in order to use a sequence you set up your ejb like such @Id(generate=SEQUENCE,generator="SEQ_ADRESSE_GEN") @SequenceGenerator(name="SDS_PAIR_RESULTS_SEQ_GEN", sequenceName="SDS_PA
-
PCUI and OCI (Open Catalog Interface)
Hi, we want to integrate a external catalog into the PCUI application qutation. The goal is to take over the shopping basket of the catalog into a Quotation. The data which should be taken over are products out of the external product catalog. Theref
-
CS6 error "file is not compatible"
windows 7 x64 photoshop CS6 beta how i can recover it? and why had error? damaged file