Insect Eye buggy in Leopard? (Test case: Glowy Tutorial from Motion Smarts)

If any of you are running Motion 3.0.1 on Leopard, would you mind trying this tutorial and letting me know if it works for you?
http://www.motionsmarts.com/tutorials/glowy/glowy1.html
It works fine for me until I get to adding the Insect Eye filter. At that point, if I've got it looping playback then it will start flashing, and if it's not playing then I don't think it will show up right at all. It seems to get even worse when adjusting the parameters.
Either way, once that filter is added, the whole project seems to have problems. If I go to the Emitter and set Show Particles As to Points, Lines or Wireframe then it will at least show it as being on a sphere again, but setting it back to Image puts it back to completely messed up.
I also tried using the Insect Eye filter in other ways in a new project, and it doesn't seem to be completely broken, but at least for me it won't work in this particular project.
I'd appreciate it if someone else could test this too, and either submit a bug report or point me in the right direction so that I can do it, if the problem is reproducible.

The problem seems to have been fixed in the new updates. I am now able to complete the steps in the tutorial with the expected results.

Similar Messages

Where should i found the executed automation test cases result in TestResult folder?

we are using VS2013, i have automated some coded ui test cases and executed from test explorer. once completed i am able to view the test result in the Test explorer window. But I am unable to view in the 'TestResult' folder under project location. (In The
Test result folder created IN & Out sub folder ) I think it should be create .trx file under TestResult folder. is there any configuration required.
Please guide me.
Thanks in Advance.

Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know that when we automated coded ui test cases from VS IDE, it is default that there have no the .trx file be created in the TestResult folder. However, there have a replace workaround that we can automate coded ui test cases using MSTest.exe
in command line. And then we can get the .trx file be created in the TestResult folder.
So you can execute the /resultsfile command to get the .trx file using mstest.exe in command line.
Reference:
https://msdn.microsoft.com/en-us/library/ms182489.aspx?f=255&MSPPError=-2147217396
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Test Cases required for BW Statistics to test in QA annd DEV.

HI All,
I am currently working on a support Project. My client has completed installing of Bw statistics in DEV and transported it to QA way back in 2006.Currrently before moving the BI Statistics data to PRD we have to test it in DEV and QA.
How to prepare sample test case for testing it in DEV and QA? Please Sugggest.

Hi,
this forum is for the SAP BusinessObjects BI Solution architecture. I would suggest you post your question to the BW forum.
ingo

Need help in writing test cases while upgradin oracle from 10g to 11g

hi all
I want to write test cases for ugrading oracle 10g to 11g i have some idea but want your input.and at the same time some people taking upgrade testing as to ensure that everything works after the upgrade - stremas, jobs, procedures.but i think as 11g is backward compatible all the things should work properly.If not then how can we write a test cases for that,your help is most welcome.
Thanks in advance

Hi;
Please see below notes which could give you some idea to create your test case. By the way if your components are certified wiht 11g so there should be any bad issue for your upgrade
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Please check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
Regard
Helios

How do you have a single test case run on multiple platforms in both a Deploy/Test build and via MTM?

I am wanting to have a scheduled nightly build execute my testcases for multiple platforms/configurations. I have multiple VMs running in these environments but the method Microsoft provided
(without digging into customizing the build template) doesn't provide any functionality for this. This is a basic use case for automation that I can't believe they would miss. Has anyone run into this and found a solution. Is it just that
you have to completely customize the template?
For a more complete use case...
I have 4 customers that have different configurations and different OS platforms on top of a generic configuration. I want the build/deploy/test build to automatically run my 152 test
cases to at minimum those 5 environments. I want this to run every morning at 1am and the tests should in the different environments in parallel (ie all of customer 1 tests run at the same time as customer 2 tests...). I also don't want to have to create
152 * 5 test cases since that will bloat things and cause more management/maintenance headaches.

I am wanting to have a scheduled nightly build execute my testcases for multiple platforms/configurations. I have multiple VMs running in these environments but the method Microsoft provided
(without digging into customizing the build template) doesn't provide any functionality for this. This is a basic use case for automation that I can't believe they would miss. Has anyone run into this and found a solution. Is it just that
you have to completely customize the template?
For a more complete use case...
I have 4 customers that have different configurations and different OS platforms on top of a generic configuration. I want the build/deploy/test build to automatically run my 152 test
cases to at minimum those 5 environments. I want this to run every morning at 1am and the tests should in the different environments in parallel (ie all of customer 1 tests run at the same time as customer 2 tests...). I also don't want to have to create
152 * 5 test cases since that will bloat things and cause more management/maintenance headaches.

Sequences - Test Organzer: How to move more than 1 test case at a time

Hello,
I would like to be able to move multiple test cases within a sequence but I do not know how. If I highlight multiple rows and select Move Test Case only 1 of the rows will move. This is fine if your test package only has a few transactions but if you have many it becomes very time consuming.
Does anyone know how to move more than one test case at a time within a sequence?
Regards,
Corinne Taylor

Hi Corinne,
Actually I do not have any solution for that either. I am also only able to move the test cases one by one, which indeed can become very time consuming. There I have a small question to you: when I am in the web-based application to change the sequence of the test cases, everything goes really slow. Selecting the test package in the browser, going to change mode, selecting the test cases, creating a test sequence...it all takes time before I can continue. Is it the same with you? Else I will need to look at what is going wrong on our side.
Thanks and best regards,
Kristof

Getting error while writing JUnit test case for RestFul Services

Hi All,
I have written Restful services in Netbean 6.8.
It's running well...no issues.
{color:#0000ff}While writing JUnit test cases for them, I am getting following error:
{color}{color:#993300}Testcase: testGetAuthenticated(com.ct.services.LoginServicesTest): Caused an ERROR
Implementing class{color}
java.lang.IncompatibleClassChangeError: Implementing class
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:160)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:65)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:52)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:34)
at com.ct.services.LoginServices.getAuthenticated(LoginServices.java:205)
at com.ct.services.LoginServicesTest.testGetAuthenticated(LoginServicesTest.java:84)
Test com.ct.services.LoginServicesTest FAILED
F:\NetbeanProjectsWorkspace\DemoProject\nbproject\build-impl.xml:972: Some tests failed; see details above.
BUILD FAILED (total time: 11 seconds)
{color:#0000ff}Strange thing is that when I am commenting below lines and its related calls:
{color}
{color:#ff0000}EntityManagerFactory mEmf = Persistence.createEntityManagerFactory("AnyName");
EntityManager mEm = mEmf.createEntityManager();
{color}
{color:#0000ff}from my code, JUnit test cases are working fine.
{color}Anybody having any idea about this ?
Thanks
Avi
Edited by: Avi007 on Aug 28, 2010 5:17 AM

Hi All,
[http://stackoverflow.com/questions/2778295/test-driven-development-problem]
Please refer the above link for the solution
Thanks
Avi
Edited by: Avi007 on Aug 30, 2010 12:33 AM

Error encountered while running a test case using MTM

Hello,
Has anyone encountered this error while running a test case using MTM 2013?
When I click on OK, the message is again shown until that time wherein the popup error is no longer shown.
When I try to continue to the next pages wherein a modal is being open and I need to enter some data on a text field, the IE would stop working and seems to crash.
Thanks!

Hi Kiyaruh,
Base on the error message, the error is threw by internet explorer.
Does it have the same issue when access that web site/page in IE directly or it just occurs when run tests through MTM?
What’s the version of your browser? You may try it with other browser and check whether it has same issue.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Exception while running a test file as JUNIT test case

Hi,
I am trying to build a code using Eclipse to generate an "ear" file that can be used for deployment. The ear file is generated successfully but the build is not successful as the following exception is thrown while debugging a junit test case:
javax.naming.CommunicationException: tdk.dk:389 [Root exception is java.net.SocketTimeoutException: connect timed out]
     at com.sun.jndi.ldap.Connection.<init>(Connection.java:197)
     at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:118)
     at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1580)
     at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2616)
     at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:287)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at junit.framework.TestCase.runTest(TestCase.java:154)
     at junit.framework.TestCase.runBare(TestCase.java:127)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at junit.framework.TestSuite.runTest(TestSuite.java:208)
     at junit.framework.TestSuite.run(TestSuite.java:203)
     at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130)
     at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197)
Kindly suggest a solution.
P.S. : All test cases are running fine except for one test case, whose error details are given.

No it is not. The Oracle JDeveloper and ADF forum is for development questions around development with Oracle JDeveloper and ADF.
If you use Eclipse through OEPE, you could post the question here
Enterprise Pack for Eclipse
If you don't use OEPE but Eclipse, then this forum may be a great source of help: http://stackoverflow.com/
Frank

Error in running juit test case for struts2 action class

Hi,
I am getting error when i am running my junit test case for struts2 action class. Here is the code.
public class RoleMasterNewActionTest extends StrutsTestCase {
     public void setUp() throws Exception {
        super.setUp();
        ObjectFactory.setObjectFactory( new ObjectFactory() );
     public void testDoSomeThing()throws Exception {
          RoleMasterNewAction action = new RoleMasterNewAction();
          assertTrue(action.doSomeThing());
}I am getting error at testDoSomeThing(). the error is
2010-04-30 15:07:12,263 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts-default.xml]
2010-04-30 15:07:12,325 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts-plugin.xml]
2010-04-30 15:07:12,388 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts.xml]
2010-04-30 15:07:12,388 WARN [org.apache.struts2.config.Settings] - Settings: Could not parse struts.locale setting, substituting default VM locale
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-Lookup
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-label
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-headings
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-messages
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-setup
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.common-errors
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-label
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-lookup
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-headings
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-jndinames
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-jndinames
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-labels
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-headings
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-alert
2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.form
2010-04-30 15:07:12,419 INFO [org.apache.struts2.spring.StrutsSpringObjectFactory] - Initializing Struts-Spring integration...
2010-04-30 15:07:12,419 FATAL [org.apache.struts2.spring.StrutsSpringObjectFactory] - ********** FATAL ERROR STARTING UP STRUTS-SPRING INTEGRATION **********
Looks like the Spring listener was not configured for your web app!
Nothing will work until WebApplicationContextUtils returns a valid ApplicationContext.
You might need to add the following to web.xml:
    <listener>
        <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
    </listener>but already i have the listener configuration in my web.xml.
Thanks in advance..

I guess it wasn't reading the right web.xml file.
You may prove it by deleting your web.xml file (don't forget to make a backup), and then run the test again to see whether the error is the same.

Error in juit test case for struts2 action class using StrutsSpringTestCase

Hi
I am getting some error when i am running my Struts2 Action class junit test case using StrutsSpringTestCase class (which is in struts2 junit plugin 2.1.8 version)
Here is the code....
package ipl.admin.action.test;
import java.sql.Timestamp;
import java.util.Date;
import org.apache.struts2.StrutsSpringTestCase;
import ipl.admin.action.RoleMasterNewAction;
import ipl.admin.beans.RoleMasterNewBeanRemote;
import com.opensymphony.xwork2.ObjectFactory;
public class RoleMasterNewActionTest extends StrutsSpringTestCase {
     //XmlBeanFactory bf = new XmlBeanFactory(new ClassPathResource("applicationContext.xml", getClass()));
     RoleMasterNewAction action = new RoleMasterNewAction();
     RoleMasterNewBeanRemote roleMasterBeanNewRemote;
     public RoleMasterNewBeanRemote getRoleMasterBeanNewRemote() {
          return roleMasterBeanNewRemote;
     public void setRoleMasterBeanNewRemote(
               RoleMasterNewBeanRemote roleMasterBeanNewRemote) {
          this.roleMasterBeanNewRemote = roleMasterBeanNewRemote;
     public void setUp() throws Exception {
          super.setUp();
          ObjectFactory.setObjectFactory(new ObjectFactory());
     public void testDoSomeThing() throws Exception {
          //System.out.println(bf.getBean("loginIntercepter"));
          assertTrue(action.doSomeThing());
}I am getting error for this code. Below is the error details.
2010-05-03 17:28:14,671 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts-default.xml]
2010-05-03 17:28:14,859 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts-plugin.xml]
2010-05-03 17:28:14,999 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts.xml]
2010-05-03 17:28:15,015 WARN [org.apache.struts2.config.Settings] - Settings: Could not parse struts.locale setting, substituting default VM locale
2010-05-03 17:28:15,015 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-Lookup
2010-05-03 17:28:15,015 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-label
2010-05-03 17:28:15,015 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-headings
2010-05-03 17:28:15,015 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-messages
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-setup
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.common-errors
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-label
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-lookup
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-headings
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-jndinames
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-jndinames
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-labels
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-headings
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-alert
2010-05-03 17:28:15,046 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.form
2010-05-03 17:28:15,140 INFO [org.apache.struts2.spring.StrutsSpringObjectFactory] - Initializing Struts-Spring integration...
2010-05-03 17:28:15,171 FATAL [org.apache.struts2.spring.StrutsSpringObjectFactory] - ********** FATAL ERROR STARTING UP STRUTS-SPRING INTEGRATION **********
Looks like the Spring listener was not configured for your web app!
Nothing will work until WebApplicationContextUtils returns a valid ApplicationContext.
You might need to add the following to web.xml:
    <listener>
        <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
    </listener> But already i have the listener configurations in my web.xml .
Thanks in advance...

I guess it wasn't reading the right web.xml file.
You may prove it by deleting your web.xml file (don't forget to make a backup), and then run the test again to see whether the error is the same.

Moving to Surface Pro 3: Guidance on Test cases & App Comptability

Hi all,
I am working on a project to roll out Surface Pro 3 with Windows 8.1 from Windows 7 64-bit laptops for close to 100 users. The office has a full-fledged LAN/wireless, external connectivity through VPN with Windows Domain Controllers and many
applications.
I see there are 2 main parts with regards to testing. One is to test the standard windows features including network connectivity and the second is application remediation.
Can you share any test cases for standard windows features that you may have used in similar upgrades?
For checking application compatibility, is Application Compatibility Toolkit (ACT) sufficient to assess the need for any application remediation?
Thanks in advance,
Avinash

Hi Avinash,
The Microsoft Application Compatibility Toolkit (ACT) can be used to reduce the cost and time in resolving application compatibility issues and it can be used to quickly deploy Windows and Windows updates.
Here is a link for reference of using Application Compatibility Toolkit:
Application Compatibility Toolkit (ACT)
http://msdn.microsoft.com/en-us/library/windows/desktop/dd562082(v=vs.85).aspx
Best regards

Setting Logical component for Test Case.

Hello,
I've created test case in SOLAR02 and I want to link my test case to Quality Assurance in my logical component (SAP ECC).How can i set this link? Now the test cases are link to Developement system in SAP ECC. Please tell me how can i fix it.

Hi,
If you want to perform the testing in QA client, set your system role as "Quality system" in STWB_2 transaction.
By default, the system role has to come as "Quality system".
If it is not check your transport route of the logical component in t.code SMSY.
Regards
Senthil

Test case upload in solar02 transaction using function module

I have requirement to upload test case and test case name in transaction solar02,
i want functional module name which will ask for project name, business scenarious, business processes
test case type, test case , test case name

Hello Vinod, see the following code (I assume you have a item data on columns A and B as from row 4, and header data on row 2)
    Set rfcctl = CreateObject("sap.functions")
    Set conn = rfcctl.Connection
    conn.Client = "<client>"
    conn.hostname = "<server>"
    conn.user = user "<username>"
    conn.Language = "<lang>"
    conn.password = "<password>"
    conn.SystemNumber = "<system number>"
    If conn.Logon(0, True) Then
       Set rfc = rfcctl.Add("PROCESS_MESS_UPLOAD")
       Set data = rfc.Tables("MSHD").Rows.Add
       item("WERK") = Range("A2").Value
       item("MSCLA") = Range("B2").Value
       item("SEDAT") = Range("C2").Value
       'add all necessary table columns
        i = 4
        While Range("A" & i).Value <> ""
            Set item = rfc.Tables("MSEL").Rows.Add
            item("ATNAM") = Range("A" & i).Value
            item("ATWRT") = Range("B" & i).Value
            'add all necessary table columns
            i = i + 1
        Wend
        If rfc.Call Then
          'CHECK FOR SUCCESS OR ERRORS
        Else
            MsgBox "Call error", vbOKOnly
            Exit Sub
        end if
    Else
        MsgBox "Logon error", vbOKOnly
        Exit Sub
    End If
    Set rfcctl = Nothing
    Set conn = Nothing
Note: I haven't used this FM before, so I'm guessing which table fields may be useful to you
Cheers
Michael

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

Insect Eye buggy in Leopard? (Test case: Glowy Tutorial from Motion Smarts)

Similar Messages

Maybe you are looking for