"Insecure Page" Pop-Down on Safari 6.1

I am getting a pop-down on Safari v6.1 that says my authorize.net credit card submission page is insecure, even though it is https with a lock icon. No such warning on Firefox. Also cannot log in to my merchant services on Safari but can on Firefox. My first response was to call our webhost to make sure our ssl certificate was ok and it was. The pop-down only happens on Safari and the test order went through anyway, even though I did not click "continue". This just started happening a few days ago. Does this sound like a hack or is anyone else having this problem with Safari? Very bad news for our business--no orders in 5 days!

've also had freezes and outright crashes, but only with Safari
Post a Safari crash report so we can try and help you.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash  information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
And how much free space on the startup disk?  Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space

Similar Messages

  • When i open safari the bookmarks page pops up.  how can i stop this from happening?

    when i open safari the bookmarks page pops up.  how can i stop this from happening?

    Under the older iOS, when you opened a blank Safari page, Bookmarks automatically opened. However, with the newer iOS, this does not happen anymore. What iPhone and version of iOS do you have?

  • When turning pages in catalog in safari messages comes up "Are you sure you want to send a form again? it then asks if I want to cancel or resend form? what is this and why does it pop up?

    When turning pages in catalog in safari, message comes up "Are you sure  you want to send a form again? It then asks if I want to cancel or resend form? What is this and what am I doing wrong? I'm obviously new to mac.

    You can turn that off if you want ..
    From your Safari menu bar top of your screen click Safari > Preferences  then select the Security tab.
    Deselect:   Ask before sendinga a non-secure form from a secure a secure website

  • Hi, I've recently bought an iPad2 and can't get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading. Apparently it is

    Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
    Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
    Your help will be highly appreciated.
    Thank you.
    Luis.

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • HP Officejet Pro 8000 WILL NOT PRINT PAGE TWO IN CORRECT ORIENTATION. SECOND PAGE UPSIDE DOWN.

    Cannot booklet print in duplex mode. Prints second and third side of page upside down and 
    page 4 as original page.   Does't worlin any mode, even booklet mode.  Had a HP5400 previously,
    which did booklet printing just fine.  Can the driver from the 5400 be adjusted work on the 8000?

    If you have HP software in your Applications folder that was not specifically meant for 10.7 (Lion), uninstall the software using the 'scrubber' option:
    Go to Applications/Hewlett Packard/ click on HP Uninstaller
    Click on Continue
    Highlight your device on the left pane
    Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
    There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    Click Continue and let it finish
    Restart your Mac
    Download and install this: http://support.apple.com/kb/DL907
    Now reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • After first installing itunes,"agree, etc" page pops up for1 sec then gone

    After I install the Ipod updater and Itunes just like the instructions tell me to, I go for the first time to open itunes. Then i see a page that has " Accept, and like 2 other buttons on the bottom that has a list of agreements on it. (This is after I install the itunes.)
    So this page pops up for only one second, then goes away. I keep clicking the itunes, and it keeps doing the same thing. I already installed itunes over and over, and every time, the same thing.
    please help.

    hi Casper!
    I've actually had people come to me and ask me about this. It's software interference...
    if the people using that advice find that they have to disable six-letter and four-letter startup items that don't turn up any hits when they Google on "[name-of-item] start-up" (the start-up item names are randomly generated on each PC) then the software interference is by malware, and the MSCONFIG technique will often only give temporary relief.
    (the license screen "flash" is the classic symptom of the malware issue (though it's not universal), although strictly speaking the similar Quicktime launch "flash" is the issue. almost all the QuickTime-based applications can get taken down by this on an infected PC, including itunes.)
    love, b

  • Error 404 - how do I get rid of this message on my Google page when I open Safari?

    How do I get rid of error 404 on my Google page when I open Safari?

    Safari - Reset Safari - choose all options and reset Safari.
    If that does not work then check to see what Safari extensions you have installed, one or more may be creating a problem.
    Another possible fix is restarting in Safe Mode which clears some caches, one or more may have become corrupt. To restart in Safe Mode simply hold down the Option key when you hear the startup tone until a progress bar appears. Then test Safari and then restart normally.

  • Web pages pop up in background?

    while on line certain web pages pop up , like ask? words , mevio?

    Safari > Preferences > Security
    Uncheck Java and Javascript
    Quit safari and see if those things still come up.
    If they don't then you can reenable those and download an extension that blocks Javascript.
    I personally don't use Java because that's where most security exploits are.
    Chris

  • Pop ups on Safari

    I have always blocked pop ups on Safari, but lately I'm getting them anyway.  Any ideas on why that would be and what I can do to stop it.  They are VERY annoying!

    True. Very annoying.
    Safari 5
    Blocking pop-up windows stops only those windows that appear when you open or close a page. It does not block pop-up windows that open when you click a link.
    http://support.apple.com/kb/PH5040
    Safari 6
    http://support.apple.com/kb/PH11946
    Best.

  • Down load safari 6.0

    Where can I down load SAFARI Version 6.0 ?

    For some reson the download was removed from the main Safari page.  It should still show up under software update, but if it does not, you can download it here:
    http://swcdn.apple.com/content/downloads/41/52/041-6856/x5uvu03lvir18bqkzslxhh0p rnly9oqoys/Safari6Lion.pkg
    Here is the information page about Safari 6 for Lion:
    http://support.apple.com/kb/HT5275

  • Hi getting random websites popping up on Safari on Mac...running 0sx10.9.3

    Hi Im getting  random websites popping up on safari. Im using a Mac running osx 10.9. Checked pop up blocker and ran a scan with clam ax. However these sites still come up as I browse...Any Ideas ?

    You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • OS 10.6.8 recently inadvertantly updated Safari to 5.1. How do I back down to Safari 5.0.5

    DUe to the known Java issue, I can't drag and drop files into pop up windows. I need this function constantly.
    How can I back down to Safari 5.0.5 0r maybe 5.0.6 to resume normal operation?"
    w

    Hi
    http://hints.macworld.com/article.php?story=20110722154439693
                                       or
    http://www.macworld.com/article/161367/2011/07/revert_safari.html
    but download 5.0.5
    which is  forcing the install using Pacifist from http://charlessoft.com/
                                           or
    (re)install the 10.6.8 1.1 combo (1+ GB) which does overwrite safari 5.1 with 5.0.5
    the first is quickest. 5.0.6 won't work on snow leopard

  • Security issue with page drop down on planning form 11.1.1.3

    I'll buy a round of Newcastles for anyone that can fix this issue.
    Planning 11.1.1.3 a given user is given @idescendants write access to a cost center rollup that has shared members underneath. The stored members are in a primary rollup higher up in the hierarchy. The webform has the cost center selection on the page drop down. The first child in the rollup does not display. This occurs for every rollup, the first child member is not visible i nthe drop down. So for example, the outline looks like this:
    primary cost center hierarchy (stored)
    rollup1
    --ccxxx stored
    --ccyyy stored
    alternate hierarchy (shared members)
    rollup2 <--------------user has write access to @Idescendants of this rollup
    --ccxxx shared
    --ccyyy shared
    In the page drop down, only the ccyyy member shows. Not the ccxxx. Dev has the same access applied and both show correctly. I've tried refreshing security, pushing filters from plan to essbase (even though this is metadata security in planning) and nothing fixes. Webforms are identical. My next step is to restart the planning service when i get down time but was wondering if anyone else has seen this issue.Always the first child of the shared rollup that doesnt display.
    Edited by: EssbaseInAz on Nov 4, 2009 3:11 PM

    Exports are identical. In fact, prod security was cleared and reloaded using an export from dev. after the upload i re-exported prod and compared the export to what was loaded (export from dev). Security is identical. This only for users with security set on the alternate hierarchy rollups up. Admin members are fine. One test i did do was to give access to the first child that is not displaying up on the stored member. If i do that, the member will show. But that's not really feasible in this security setup and it does not explain why the exact same security works fine in dev.
    I thought about about the second issue you raise. it does seem to behave like that. but the part is tagged never share, not label. Same as in dev, which works. plus like you said, that situation only seems to arise when the members are on the row and even then, the member displays, it's just set to read only. I'm wondering if there's some flag set in the relational backend that's causing an issue or something like that. I've pushd the filters to essbase and using a test id setup i can replicate this issue, but with an excel retrieve i can obviously see the member (since metadata security isnt applied in excel) and i can also see the data for the missing cost center. So, its somewhere in planning where the metadata security is applied. I might poke around the planning tables and compare to dev to see if i can find any smoking guns. Really bizarre. Plus tomorrow i've got a window to restart the planning service to see if that helps.
    Thx for the response Jake and if you have any other suggestions i'm open. If i find a solution i'll let you know.
    Pete

  • How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

    Hi Everyone,
    Iam stuck with 1 problem please can any 1 help me if u know the solution.
    Here is my problem:
    How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
    For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
    And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

    Thanks Nikhil. But I am fetching the values from the LOVCache.java.
    I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
    I mean to say can I write
    unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
    where LOVCache.entityTypeSelectionList is used to populate the drop down box.
    Regards,
    Aseet

  • In my Yahoo mail: when I click on any opened email the page jumps down to the bottom of the email. I've contacted Yahoo about this. Is this a problem with Yahoo, Mozilla or neither? Is it just my computer has something wrong with it? This started last wee

    When I open a Yahoo email the page jumps down to the bottom of the page. Is this a Yahoo problem, Mozilla or neither?
    == This happened ==
    Every time Firefox opened
    == last week

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

Maybe you are looking for

  • I don't have a bookmark.plist in Library

    Today I switched from mobile.me to iCloud and now I realize that my bookmarks changed back to a configuration I had weeks ago. So I go look for the bookmarks.plist in my Library to do whatever it takes - actually I am looking in yesterday's Timeline

  • Runtime error during COPA-Ext

    Hi Guys I am new to SAP BW. I am trying to schedule an initial load but I end up getting the following error message. This is an extract from the dump. call function 'RSAN_LOGSYS_DETERMINE'         destination g_dest         exporting           i_cli

  • Ignoring error in afterCompletion.

    I just tried to force an ejbStore on an entity by:           (in weblogic-ejb-jar.xml)           <persistence-descriptor>           <is-modified-method-name>isModified</is-modified-method-name>           <delay-updates-until-end-of-tx>false</delay-up

  • Problem downloading iTunes LP

    I downloaded "The Beatles 1 Album" on my iphone and when i opened itunes, it tried to download the "itunes LP" for this album, but as it is written in the notes for this album, the itunes LP is not available in Canada. I don't care about it but now,

  • Camera RAW for Nikon 7100

    Before I purchased my new Nikon 7100, I updated Photoshop Camera Raw and it stated the the 7100 was included in the update. Now that I have my camera, I have found that it is not covered in your latest version of camera raw. It used to be and now it