"insecure setup item disabled"

This popup when i turn on my computer...how to get rid of it

Okay guys, here's what I did. I opened Finder, clicked on Go, clicked on Computer, clicked on MacIntosh HD, clicked on Library, Clicked on startupitems, found file and dragged it to trash. Hope that helps.

Similar Messages

Insecure Startup Item Disabled

Hello
I recently installed a HP Printer (HP PSC 1410 All In One) to my MacBook system running Snow Leopard 10.6.3 and just after I installed I uninstalled when finished. Since the uninstall however, I have been getting an error message at startup reading the following:
Insecure Startup Item Disabled
"/Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings."
I was just wondering what this meant and how to get rid of this annoying dialogue box which appears at each startup of my computer. Thanks in advance

The easiest way is to remove it from that folder. I would move it to the desktop, restart, and see if you get that message. Don't throw it away until you are sure you haven't lost any functionality.
Hope this helps.

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

Update to 10.6.3 - Now Getting Insecure Startup Item Disabled

Updated Snow Leopard on the MBP last night. Now I'm getting an error message upon reboot "Insecure Startup Item Disabled /Library/StarupItems/Oracle"
I've tried using Onyx to verify and repair permissions. No luck. I also booted to the install disc, then ran disk utility to verify and repair permissions. No luck on reboot.
I have Oracle 10g installed as a separate user which is supposed to start automatically when the machine boots. I then run Oracle SQL Developer under my normal login to access the database. Because the database apparently doesn't start during that boot up, SQL Developer can establish a connection.
This worked fine up until the software update last night. How can I make that startup item secure?

Ha! Most of that's Greek to me, also. However, it's unrelated to the startup item I believe. The startup item is only used to initialize the Oracle system at startup - it runs a program or two. After that it's another story. The problem may be due to an incompatibility between the version of Oracle and the version of Snow Leopard. I would report this to Oracle. You can help them with the problem by providing copies of any console log entries related to Oracle as well as the specific error messages received.
It's quite possible that security changes with Snow Leopard is affecting Oracle in some way that is likely permissions related. That would be my guess.
"Wheel" is a standard Unix group containing only those users who are permitted to su. Su means superuser. The superuser is a "root" user. Non-root users such as an admin user may be permitted superuser status if they belong to the wheel group.

On my laptop I'm getting the message on startup "Insecure Startup item disabled" How do I stop it from coming up? Thanks.

On my laptop I get the message Insecure Startup item disabled. "/Library/Startupitems/PACESupport" has not been started because it does not have the proper security settings".
This hadn't happened until after I had used a WiFi connection at a hotel where we were staying. If I click OK it goes away - no problem - but comes back next time I start it up. How do I get rid of the message?
Appreciate any help!

Go to /Library/StartupItems
Move the PACESupport file(s) from the StartupItems folder to the Trash.
Restart your Mac, see if it went away.

I Have an "Insecure Startup Item disabled" problem and am at a loss

Hi, I hope someone knows how to get around this in Snow Leopard?
When I log into the profiles on the iMac it gives the message "Insecure Startup Item Disabled" with the other ""Library/Startupitems/RetroRun" has not been started because it does not have the proper security settings"
Now I thought that RetroRun was a backup software used in OS9 ,OS 10.2 =>but not since OSX. Also I cannot locate said directory in the Library.
Has anyone else had this issue or anything like it? Does anyone have a solution or some ideas that might shed some light on this for me please?
Cheers
Peter

First off, there are two (ok, three) Library locations. The all users Library is at the hard drive root, and each user also has one. The System has the third, but that shouldn't be touched by mere mortals.
These commands in Terminal should fix the issuesudo chown -R root:wheel /Library/StartupItems
sudo chmod -R 0755 /Library/StartupItemsThese commands run on the all users Library.
If you look at file paths, if they have an initial slash (/), that represents the hard drive itself. If they don't, it is a relative reference to where you are (usually your home folder which sits at /Users/)

I am facing with the following problem whenever i start my laptop.Insecure Startup Item disabled."/Library/StartupItems/MobileBrServ" has not been started because it does not have the proper security settings.

I am facing with the following problem whenever i start my laptop(Macbook Air,OSX 10.9.4).
Insecure Startup Item disabled.“/Library/StartupItems/MobileBrServ” has not been started because it does not have the proper security settings.

Open /Library/StartupItems/ folder and locate the file then remove it. You have installed incompatible software. If you don't believe this is correct, then determine what software installed the item and contact the developer for help.

TS3493 I too have the Insecure Startup Item Disabled error message.

The folder is empty, although 319Kb on Disk. I am unable to move it to the Trash as it says it's required by Mac OS X. This is truly infuriating. I have entered Disk Utility and used Repair Permissions. Currently running Mountain Lion, 10.8.3.

This is incorrect. Most of the time this error happens from faulty permissions settings on the startup items or the StartupItems folder. Startup items should be owned by root (the "system" account) and not be writable by anyone else, but if not then the system will detect this and prevent it from loading, as this means a third-party might have tampered with it and potentially cause a problem (hence the "insecure" characterization).
Since Startup Items are from third-party installations, often OS X will not include them in a permissions fix routine as there may be no entries for them in the permissions database.
To correct this problem, run the following two command in the Terminal:
sudo chown -R root:wheel /System/Library/StartupItems
sudo chmod -R 755 /System/Library/StartupItems
Earlier it was mentioned that a Startup Items folder is within the User library, but this is not the case as Startup Items are only activated at boot and not at login. There is no point for one to be in the user's library, and the system will not look there for any startup items..

Insecure Startup Items

First I get
INSECURE STARTUP ITEMS FOLDER DETECTED.
Items in the Startup Items folder ("/Library/StartupItems/") have not been started because the folder does not have the proper security settings.
followed by...
INSECURE STARTUP ITEM DISABLED.
"/Library/StartupItems/Qmaster" has not been started because it does not have the proper security settings.
How do I fix this?
Thanks

Repair permissions which should fix the problem. If it does not then remove the Qmaster startup item from the /Library/StartupItems/ folder. Update your FCP software which should resolve the problem.
Snow Leopard no longer makes use of startup items so this version of Qmaster must be out of date and needs to be replaced if repairing permissions doesn't solve the problem for you.

Everytime I start up my macbook pro get error message Insecure Start Up Item Disabled /Library/Startupitems/HPTrapMonitor has not been started because it does not have the proper security settings

everytime I start up my computer I get error message
Insecure Start-Up Item Disabled
"/Library/StartupItems/HPTrapMonitor" has not been started because it does not have proper security settings

Hope info from this article helps.
http://support.apple.com/kb/TS3493
Best.

ITEM SETUP 및 ITEM에 관해 자주 하는 질문과 대답 - 2

제품 : MFG_INV
작성날짜 : 2005-01-26
ITEM SETUP 및 ITEM에 관해 자주 하는 질문과 대답 - 2
====================================================
PURPOSE
Item Setup에 관한 내용과 고객이 자주 질문하는 Item 관련 내용을 정리하여
고객의 문의 사항을 해결할 수 있다.
Explanation
1.Mater level에서 Organization level로 변경하는 것과 같이 Item
attributes의 control level은 어떻게 수정 하는가?
Attribute Control Form에서 control level을 변경하려면 다음과 같은 error
가 발생한다.
"frm-40200: field protected against update"
A) 먼저 'Status Setting' field의 값을 'Not Used'로 변경해야 한다.
이 status 변경 후 attribute의 level control 값을 master level에서
organization level로 변경한다.
Level control 변경 후에는 'Status' field 값을 변경전의 값으로 다시
수정 후 저장해야하는 것을 잊지 말아야 한다.
2.Item을 inactivate 시키는 방법은?
A) Master Item Form(Inventory > Items > Master Items)에서 item status
field의 값을 'inactive'로 변경하거나,item을 사용 가능하게 하는 정의된
attributes(stockable, shipplable, orderable, etc...) 값들을 disalble
시키는 다른 Status로 변경한다.
'Inactive' status는 application에서 제공하는 pre-seeded 이며 이 기능을
목적으로 한다.
3.어떤 문자를 item name에 사용할 수 있는가?(특수 문자 포함)
A) 단지 강력한 rule은 System Item Flexfield 에서 Segment 구분을 위해
지정된 character는 사용하지 않는 것이다.
또한, Flexfield에 관련된 valueset에 의해 허용되지 않는 characters는
입력되지 않을 것이다.
향우 문제 발생을 방지하기 위해 구분자로 사용될 만한 어떤 char도 사용
하지 않는것은 권장사항이다.
'#@%&' 이와 같은 특수문자를 사용하지 않는것은 negative impact를 줄 수
있는 가능성을 줄일 수 있는 가장 좋은 방법이다.
Form에서 query시 query operator characters(=!><)와 같은 특별한 의미를
가지는 percent(%), understoce(_), poung(#)는 사용시 주의해야 한다.
4.Onhand Quantity는 없으나 이미 transaction이 발생한 item의 costing
enabled와 inventory asset flags의 값은 변경할 수 있는가?
A) 이들 flags의 변경은 가능하다.
만약 flags를 checked에서 unchecked로 변경하면 관련 cost records가 삭
제될 것이라는 warning을 받을것이고, 이 item의 transaction에 대한
Cost of Goods은 더 이상 계산되지 않을것이라는 주의를 받게 될 것이다.
요컨대 user가 행하는 것은 asset item을 expense item으로 변경하는것
이다.
만약 unchecked flag를 checked flag로 바꾸면 Database trigger는 활성화
되고 이 item에 cost records가 추가 되는 원인이 된다.
이 action에는 주어지는 경고는 없다.
5.새 item은 만들고 모든 orgs에 item assign을 하려할 때 responsibility
에 따라 몇 몇의 organization은 제한이 됨에도 불구하고 application은
모든 orgs에 assign 하는 것을 허용한다.
이와 같이 되는 것이 정상인가?
A) 문의한 내용은 standard functionality 이다.
Responsibility가 특정수의 organization의 access를 제한 한다 하더라도
"Assign to All organizations" check box는 user의 responsibility에 의해
제한하지 않고 item을 모든 orgs에 assign 한다.
6.Item이 expense item인지 asset item인지 구분하는 방법은?
A) Navigate to the Organization Items form:
Inventory > Items > Organization Items.
Item을 조회 후 'Costing' tab으로 이동한다.
"Inventory Asset Value" flag가 expense 인지 asset 인지를 결정하는데,
이 flag가 check 되어 있으면 asset item이다.
7.이미 입력되어진 item revision을 삭제하거나 disable 할 수 있는 방법은?
A) Revision을 삭제하거나 disable 할 수 있는 방법은 없다.
이 내용은 historical data로 남아 있어야만 한다.
제안할 수 있는 Workaround 방법은 새로운 item을 생성하여,예전 item이
가지고 있는 onhand quantity를 새롭게 생성한 item 으로 이전하고,이전
item을 삭제하는것이다.
이 Workaround의 부정적인면은 단지 얼마간의 transaction history 를 잃을
수 있다는 것이다.
Example
Reference Documents
Note 111742.1

ITEM SETUP 및 ITEM에 관해 자주 하는 질문과 대답 - 1

제품 : MFG_INV
작성날짜 : 2005-01-25
ITEM SETUP 및 ITEM에 관해 자주 하는 질문과 대답 - 1
====================================================
PURPOSE
Item Setup에 관한 내용과 고객이 자주 질문하는 Item 관련 내용을 정리하여
고객의 문의 사항을 해결할 수 있다.
Explanation
Item Setup FAQs
===============
1.한 번 Item이 organization에 assign 되었다면,향후 이 관계를 삭제하는것
은 가능한가?
A) 만약 Item을 organization에 assign을 하였다면, Item이 transaction이
한 번도 발생하지 않은 경우에만 오직 organization으로부터의 삭제가
가능하다.한 번이라도 Item이 transaction이 발생했다면 organization으로
부터의 삭제는 불가능하다.
하지만,Item define form의 'Item Status' field를 'Inactive' 상태로 변경
하여 item이 LOV에는 계속 포함되더라도 더 이상 transacting이 발생하는
것을 막을 수 있다.
2.Item UOM을 어떻게 setup 하는것인가?
A) Item transacting시 항상 정의되어 있는 Primary UOM이 default로 되고,
만약 user가 다른 UOM 이용이 필요하면 transact시 UOM LOV에서 Primary
UOM이 아닌 UOM을 선택할 수 있다.
한 번 item에 지정된 primary UOM은 수정 할 수가 없다.
3.이미 transaction이 발생한 item인 경우 item의 locator control method를
어떻게 변경 할 수 있는가?
(예: No Control -> Prespecified)
A) Item에 onhand quantity가 존재한다면 Locator control attribute 값은
변경할 수 없다.
변경하기 위해서는 먼저 Misc.issue로 모든 quantity를 issue 시켜 onhand
quantity가 존재 하지 않게 한 다음 Locator Control attribute를 수정
하고, Locator setup으 한다.
이 후 Misc.receipt을 이용하여 특정 Subinventory/Locator에 아까 issue
시킨 수량 만큼을 receive 한다.
4.Item의 UOM을 변경 시키는 방법은?
A) 일단 UOM이 item에 지정되면 이 UOM을 변경할 수 없다.
UOM을 변경을 위한 제안 방법 :
만약 Item이 transaction이 전혀 발생하지 않았다면 이 item을 delete 하고
다른 UOM을 가진 item을 다시 추가 할 수 있다.
하지만 Item이 한 번 이라도 transaction이 발생하고,Order/PO/WIP job 과
같은 작업에 남아 있는 transaction이 없다면 UOM을 변경하기 위해 다음의
방법을 사용할 수도 있다.
1) 기존의 item의 이름을 변경 후 저장
(예: Item '123' -> '123-Bad UOM')
2) 다른 UOM을 갖는 새로운 Item '123'을 추가
5.더 이상 사용하지 않는 Item Template를 삭제하는 방법은?
A) 원하는 않는 Item Templates의 삭제를 위한 제안 방법 :
1) Navigate Setup: Items > Templates - Find Item Templates form
appears.
2) LOV를 click하여 삭제할 Item Template를 선택
3) Find Item Template form에서 [Find] button을 click 하면 선택한 item
template를 보여주는 Item Templates Summary form이 display
4) Item Templates Summary formd에서 [Open] button을 click,
Item template form display
5) 화면 상단의 Menu 중, Edit > Delete를 선택 후 저장
한 번 삭제한것은 다시 복구 할 수 없으므로 다시 필요할 수도 있는
Item Template를 지우지 않게 주의해야 한다.
6.Custom Item Attributes를 생성할 수 있는 방법은?
A) Custom Item Attribute를 생성할 수 있는 방법은 없다.
하지만 Form에 DFF를 정의하여 새로운 attributes로 사용할 수는 있다.
7.Master Organization이 하나임에도 불구하고 Application login 후 처음에
Master Item form을 open시 application은 바로 Organization 선택 화면을
보여주는 이유는?
A) Multi-Org를 setup 하고 처음 form을 open 한다면 거기엔 하나 이상의
Master Organization이 존재할 수 있는 가능성이 있다.
그렇기 때문에 User는 조회되는 Org List 중에서 하나의 Org를 선택함으로
써 Master Organization을 선택한다.
Example
Reference Documents
111742.1

Why Photoshop Elements 11 File-Export menu item disabled?

why is Photoshop Elements 11 File-Export menu item disabled?
To Dup:
bring up the tool and a photoshop project file
ensure my license is up to date
ensure this tool is updated
File Export is disabled
try may other files, get same result

I have no idea what it has ever been used for (Save As usually being the route to export to a different format), but it exists and is greyed out in PSE12 as well. I suspect a hangover from an old version.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Setup: Item: Item Types (Inventory)

Hello,
I am trying to modify/add User Item Types in the Inventory module (logged in as an Inventory user...there is no inventory super user responsibility setup) however none of the fields are modifiable nor am I able to define andy new User Item Types. I keep getting the error "FRM-40200 Field is protected against update"
Setup: Item: Item Types
I can't figure out what I am doing wrong. I believe the Inventory responsiblity OOTB should have the necessary permissions to configure the User Item Types.
Please help.

Hi,
Could you please check below things in your setup..
1) Is there any custom code involved in this form (Setup --> Item --> Item Types (define lookup Form) ?
2) I strongly believe you need to check the Menu/Sub-menus/functions which are associated to the responsibility you are using.
E.x : In Inventory super User we are using a Menu : INV_NAVIGATE, under this we have a Sub-Menu :
INV_SETUP_ITEMS (Sub Menu)
======================================
Prompt          : Item Types
Function                     : QuickCodes: Item Type (FND_FNDLVMUL_ITEM_TYPE)
Description     : Maintain Item Types
Grant          : Yes
User Function : "QuickCodes: Item Type"
=======================================
Function     : FND_FNDLVMUL_ITEM_TYPE
Description     : QuickCodes: Item Type
Paramter     : VIEW_APPLICATION="AU" LOOKUP_TYPE="ITEM_TYPE"
You need to drill down little bit here..
3) Check if any view_only Menu applied to this reponsibility.
Regards,
S.P DASH

Insecure startup system disabled?

okay, got home this morning and started up the mac - memory 4G 667 MHz DDR2 SDRAM running Snow leopard. when it started up this box came up...
Insecure Startup system Disabled
"/Library/startup/PACESupport" has not been started because it does not have the proper security settings.
This just happened for the first time, any ideas. thanks Mac geniuses.
Create a wonderful day,
God Speed.
Jerry

I'm getting a message pop up when I turn on my macbook pro with 10.6.2.
Insecure Startup Intem Disabled.
Library/startupitems/PACESupport
"Does not have proper security setting"
I installed any older version of Protools so I could use the MBox 1 with garageband. Nether Protools or the Mbox work with this version of Snow Leopard, so I uninstalled, but the message still pops up. What can I do to get rid of this.

"insecure setup item disabled"

Similar Messages

Maybe you are looking for