Insering Audio in CS6 CC - controller files: only Play and Pause?!

audio : controller files - there is only possibility for Play/Pause - what about Stop and progress slider bar (it was in CS4!)

There was no DPS in CS4 so I'm not sure what you're referring to.
If you want visible audio controllers in DPS you'll need to create the artwork yourself. http://helpx.adobe.com/digital-publishing-suite/help/audio-video-overlays.html

Similar Messages

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

  • .avi files only play sound after update

    I have a few .avi videos that used to play both audio and video before the 7.13 update yesterday, and now these .avi files only play audio, and the video is non-existant.
    I re-installed my DivX codecs, and I'm not sure what to do next.

    I am having the same problem.
    Does anybody have a resolution to this issue?

  • HT202729 Why is it now there are Song in ITune Store that I can ONLY Play and Not Buy?

    Why is it now there are songs that I can ONLY Play not Buy?

    What do you mean 'only play and not buy' ? If you mean that a song has 'play' against it in the store then that implies that you've already bought it and it's in your iTunes library

  • Embedded video files only play audio

    The newest version of Keynote (v. 4) in iWork '08 will only play the audio portion of video files I add to it. The first frame of the video shows in the navigator panel, and the files show up and are viewable in the media browser. The selection handles for the video files are visible but that's all. This version also doesn't show the video content created in previous versions of keynote. In version 3 files I'd had .avi and .mov files that worked fine. I've checked the quicktime settings in system preferences to make sure that they were set properly. Suggestions?

    After posting the original question about the newest version of Keynote (v. 4) in iWork '08 only playing the audio portion of video files I add to it, I tried every possible fix.
    Since I'd been using a newer PCI video card recently, I tried just hooking up the monitor to the AGP video card that was still installed and it solved the problem.
    If anyone is considering using Keynote v.4, make sure that you have either an AGP or PCI express slot for the graphics card you use since a regular PCI graphics card won't support video or animation files you add to Keynote.

  • IMORTED AUDIO/VIDEO FILE ONLY PLAYS THE AUDIO WITH A BLACK SCREEN

    I'm trying to put a DVD together of my friends' concert, but every time I export from AVID to a QT file, import it, transcode it, and put it in a timeline, it only plays audio and a black screen.
    I went back into AVID and made sure that I exported both audio and video...I did. Then I checked the QT file, and it plays the audio and video.
    I exported the files as uncompressed. Should I use a compressor?
    PLEASE HELP!!!
    Thanks.

    Encore CS3
    Video
    Compression: None
    Depth: Millions of Colors +
    Quality: Best
    Audio
    Format: Uncompressed
    Sample Rate: 48kHz
    Sample Size: 16
    Channels: 2
    Size:
    720x486
    Aspect Ratio:
    16:9 square pixel (864x486)
    Also,
    I recently made another DVD with the same settings that turned out fine, so I'm not sure what the problem is with this one.
    Thanks.

  • Some of my video files only play for a five second duration in QuicktimeX.

    A few video files I have only play the clip for five seconds, but when I play the same exact clips in VLC they work, it is only 3 or 4 video files, but it is a problem, also when you see the little video icon, you see the video, for the ones that only play for five seconds, you see blotches, and a grey picture. Is there any way to fix this problem? The file format is in .avi

    When trying to play open the inspector (CMD + I) and mention what the codecs are.
    Install (free) Perian 1.2

  • AVI file only plays sound, NOT video in Premiere CS6 and Element

    I tried getting this to work in Premiere pro cs6 or premiere element but it wouldn't accept this avi video file. When importing the avi file to either application, the file is imported but it shows up as an audio with no video. The video does play just fine in Windows Media Player. The file is archived as an avi file from a lorex dvr system with a codec IMM4. It is encrypted with the date and time which is very important to maintain.
    I have tried the following, but same problem of no video, only sound persists.
    Download the latest 32-bit static build of FFmpeg from here: Zeranoe FFmpeg - Builds
    Open the archive; you'll probably need 7-Zip since the archive is a .7z file. Extract the ffmpeg.exe file in the archive (it's in the "bin" folder) to the folder containing your AVIs.
    Create a text document (Notepad is fine) called "avi2mp4.bat" (no quotes) in the same folder as the AVIs, making sure to change the default TXT extension to BAT.
    Paste the following into the BAT file:    @ECHO OFF
    for %%a in (*.avi) do ffmpeg -i "%%a" -vcodec copy -acodec copy -f mp4 -y "%%~na".mp4
    Once you save the BAT file, double-click it; your AVIs will be rewrapped to MP4s without any conversion. The MP4s will correctly import into Premiere Pro.
    I would appreciate anyones insight on this matter.
    The following is the GSpot report on the file:

    I'm having the same problem.
    CS3 works fine with the avi files, but CS6 can't decipher it.
    Very aggravating - I thought CS6 was supposed to be an improvement.
    Luckily I have not uninstalled CS3.
    One solution I found was using Windows Movie Maker to open the file and then save it to a WMV format.
    That opened correctly in CS6.
    It's still another step I didn't need in CS3.

  • Why do my old QT files only play audio on QT X on Lion system

    I have some old NTSC (DV/DVCPRO) videos that play well on my old Leopard system but on my new Lion Macbook Pro, only the audio will play.  The video will play from within Finder but when I double click and it launches QT, QT behaves as if its only an audio file.  This is true when I try to import into Final Cut X.  Final Cut shows it as an audio file BUT 2 of the files DO show video.  These are all 720x480 video dumps.  So 7 files show as audio files and 2 work correctly.  And all work fine under Quicktime 7.7 under Leopard 10.5.8.

    Please disregard this posting.  I took the old file and ran it thru compressor in a 422 format and now everything works fine and only took about 10 minutes per hour of video.  I don't know how to cancel a request and I'm really pressed for time.  Thank you.

  • Files only play audio

    I formatted an external drive for FAT32. I dumped Quicktime files from my MAC onto the drive. I plugged the drive into a Windows computer. The only thing that seems to play is audio from the Quicktime clips. Am I doing something wrong? How can I play the Quicktime clips on my PC?

    That's the problem. AIC isn't a part of the normal QuickTime distribution. It comes with Final Cut and iMovie and, unless there's a version I've never found, isn't available for Windows. You'll probably need to transcode the movies into another format such as h.264 to play them on a Windows system.
    Regards.

  • Saved File Only Plays The Audio?

    hey guys
    so i loaded a .mov file that i downloaded and was editing it in iMovie 08 but when I go to export it, it saves and everything but then when I go to play it.. there's only the audio and no video??
    any help?
    thanks!

    Now when I open it, it opens in Quicktime (i tried iTunes also) and plays the audio but where the video should be is just black.
    As Winston indicated, it sounds as if your source file compression format is either Apple Animation or Apple Video. Both compression formats will import and edit in iMovie '08 normally but export with a "black" screen and a data rate little more than that of the audio track alone. This problem has existed since the initial release of iMovie '08.
    i'm sorry for sounding like an idiot.. but can you tell me where to find that?
    Load the source file (i.e., the one you imported to iMovie '08) into the QT Player. Go to the "Window" menu and select "Show Movie Inspector." When the "Inspector" window opens, check the information given in the "Format:" line.

  • CS6 saving Tiff file only as .pbm

    I'm saving a tiff image from an Imacon scanner before opening in ACR and modifying it.
    Then, proceeding to Photoshop CS6 for Mac for further modification.  On saving it will only save as .pbm and not .tif.  If I modify the suffix is shows as .tif.
    However, it will then not import into LR4. 
    It will then open in CS5 Photoshop and it also tries to save as a .pbm, but it will easily change to a Tiff suffix and save and then re-open in LR4 as a .tif.
    Confusing.  What's wrong and how can I fix it ?
    Thanks.
    Gary

    My crystal ball says that you did one of two things:
    You copied plug-ins from your older version of Photoshop to the plug-ins folder of the newer version.
    Or you set the Extra plug-ins folder to point to the plug-ins under the older version of Photoshop.
    You can't mix plug-ins provided by Adobe with the older version of Photoshop up with the newer version.  Weird things will happen, such as what you're seeing here.
    You need to undo whichever thing you did above.
    To get all your old versions of plug-ins into Photoshop CS6 you need to get new installers, or failing that, isolate JUST the 3rd party plug-ins (excluding any Adobe-supplied plug-ins) and copy them to a new folder from which to access them.
    -Noel

  • Aiff (Music CD) files only play in Quicktime

    I purchased a CD at a concert last night (this guy is not signed, not on iTunes so he's making his own CD's I think)
    It played fine on the CD player in the car,
    but this morning, I stuck it in my Macbook Pro. (10.6.8)  The files show up as .aiff but it wouldn't copy (I tried to copy to a folder on the desktop first, said error 36), so I imported it into iTunes and it just skips right through them...won't play anything.
    I CAN play it in Quicktime, but that's inconvenient and I can't load into my phone/iPod...
    I tried converting in iTunes via changing the preferences/general/import settings to mp3 and then doing the Create mp3 file, but it created empty (4kb) files...
    I also tried converting in Quicktime by doing "save as" which came out as an m4v file, but it barely starts to play, then it's empty.
    I need a simple way to convert these files...I'm not a computer whiz by any means...
    HELP!!
    Thanks
    Isabel

    IsaYonah wrote:
    And also, I tried running it through Audacity-someone said that there are different kinds of aiff files and iTunes only accepts 16 bit...Didn't work.
    Did it play in Audacity? If so, and IIRC, you can convert it there to MP3 or something else. I'd give that a try.

  • Swf files only play after FLash CS5.5 is loaded

    I click on a swf file in a folder and for a while it said it was a shockwave file (after I downlaoded and installed Shockwave, I don't know why, had nothing to do I guess).   So I realized that shockwave wasn't the answer and uninstalled it.
    Then when I click on a swf file, nothing happens. I've right clicked on it and tried to put an association with it but I don't know where the flash player 11.1.152 resides in orderr to make the association.
    I had cs4  D,P, and cs5,D,P,  which I just recently uninstalled becaues adobe told me it was ok to uninstall the Design Premium  since I recently purchased cs5.5 master collection.  I usually don't fool around with files like this but
    I must have been bored.  Now I'm not.
    t Since I don't know wha t to associate my swf files with, I associated it (file association, I get there by right clicking on a swf file and a small window opens and asks what prorgram it should use to open the swf file). I know it's FLASH but
    I don't know where the file resides... in windows? In program files? In program data?? Where??  Once I find it, I will be able to chooes it and make the file association. and I am sure it will work then.   I have an adobe case # with this issue
    but it's taking them 2 days now to find an answer. they suggested I come here, so here I am.  PLease assist!! Thanks in advance!  doug

    So, I finally figured out how to do it. And here is the code for anyone who is trying to do the same.
    First thing first when you are exporting captivate file to flash it creates a "com" folder, you will need that folder to access the rdSoundHandler.
    And then simply use the following code to play/pause the swf. This code will not work for swf file created in flash.
    This is the answer to problem I found, if anyone find a better way then please keep posted.
    import flash.net.URLRequest;
    import flash.display.Loader;
    import com.adobe.captivate.flash.rdSoundHandler;
    var ldr:Loader=new Loader();
    addChild(ldr);
    ldr.load(new URLRequest("externalCaptivate.swf"));
    playp.addEventListener(MouseEvent.CLICK,playF);
    pausep.addEventListener(MouseEvent.CLICK,pauseF);
    function playF(e:Event){
    MovieClip(ldr.content).rdcmndResume = 1;
    function pauseF(e:Event){
    MovieClip(ldr.content).rdcmndPause = 1;

  • ITunes files only play for 2-10 seconds

    I added some new tunes from my hard drive into the iTunes Library. One time I did it by placing the files into the Library in the finder and then using the "Add to Library" command in iTunes. Another time I simply used "Add to Library" and navigated to where they were located on my desktop. The files' information shows them to be complete tunes and when you play one, the timer indicates the full track's time. But after anywhere from 2-10 seconds iTunes moves to the next tune. I can go thru an entire CD in about 30 seconds!
    The info about the files shows they were encoded using iTunes and QTime in various configurations - e.g. one reads "iTunes v4.7.1.30, QuickTime 6.5.2," and another reads, "iTunes v6.0.0.18, QuickTime 7.0.3.
    I'm using 10.4.3 with iTunes 6.0.1(3) and QuickTime 7.0.3.
    Any help is appreciated!

    trying to figure it out myself...annoying, makes me not want to buy anything.  Wish someone could enlighten me on this.

Maybe you are looking for