Insert a Navigation Path

We want a short navigator on each page which shows the path. It should be possible to 'go back' level by level.
(something like the Oracle9iAS Portal Navigator - Path: Page Groups > Corporate Pages > Pages).
Is there something like this 'predefined' or do we have to build that from scratch (are there any samples around).
Thanks a lot for helping
Markus

Which version of portal are you using?
If you are using V2 then you have an item called Page Path just add this item in a page it will show you the path

Similar Messages

  • Can you insert a file path in pages document

    Is there any way of inserting a "file path" into a document in the new version of pages. You could do it in Pages 09 but I can't find any way of doing in the new
    Version. I know the inference is you are using the cloud - therefore file paths are not needed - but a lot of us still store documents in various places ( especially in the work place).

    No.
    Pages 5 has over 90 other features removed:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=b14426a2c5af2 65f2213d98ee45f08d7&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Export your Pages 5 files to Pages '09 or Word .docx and trash/archive Pages 5.
    Then rate/review Pages 5 in the App Store.
    Peter

  • Create Navigation path in IDT4.0 and how to use these navigation paths in Webi report

    Hi All, I want to know how to create navigation path in universe? I am using IDT BO4.0 SP4 and relational connection and want to create navigation path. I would like to know how to use this navigation path in Webi report? If I create a webi report where can I see my navigation paths and how to use it. If you can give any document or link which expalins this whole process, that would be great. Thanks,

    HI REMI ,
    1. ANSWER TO YOUR 1st QUESTION i.e. HOW TO CREATE A NAVIGATIONAL PATH :
        IN IDT 4.0  , YOU WILL FIND A NAVIGATIONAL PATH IN BOTTOM WHEN YOU WILL OPEN YOUR      BUSINESS LAYER , THERE YOU CAN CLICK CUSTOM NAVIGATION PATH -> THEN CLICK AT      ADD A NAVIGATIOAL PATH BUTTON->THEN GIVE NAME NAVIGATIONAL PATH NAME->THEN ADD THE OBJECTS UNDER YOUR NAVIGATIONAL PATH IN A HIERARCHICAL SEQUENCE .     FOR EX :     COUNTRY->STATE->CITY . AND YOUR CUSTOM NAVIGATIONAL PATH IS     CREATED.
    2. ANSWER TO YOUR SECOND QUESTION WHAT IS THE USE OF NAVIGATIONAL PATH IN WEBI REPORT :
    NAVIGATIONAL PATH HELPS YOU TO PERFORM DRILL DOWN ON YOUR DIMENSION OBJECTS , FOR EX : LET 'S SAY YOU CREATED A NAVIGATIONAL PATH- REGION SALES  : Containing COUNTRY->STATE->SALES. THIS WILL HELP YOU TO DRILL DOWN IN YOUR WEBI REPORT AS SHOWN BELOW :
    COUNTRY                      SALES
    INDIA                             $1000000
    (after clicking INDIA you will get below structure in your Report)
    STATE                           SALES
    DELHI                             $600000
    ANDRA-PRADESH          $200000
    MAHARASHTRA             $200000
    (after clicking MAHARASHTRA you will get below structure in your Report)
    CITY                              SALES
    MUMBAI                         $150000
    NAGPUR                        $  50000  
    ACTUALLY , DRILL - DOWN AS THE NAME SOUND HELP TO DRILL THE DIMENSION TILL ROOT LEVEL & SEE THE MEASURES VALUES ASSOCIATED WITH THOSE VALUES LEVELS.
    1ST LEVEL WILL ALWAYS CONTAIN THE SUM OF THE MEASURE OBJECTS
    CHEERS ,
    KAPIL

  • How to display the navigation path in the masthead.

    hi,
       Requriement is to display the navigation path in the masthead.
       how to achieve it.
    regards,
    Shanthakumar.

    Hi,
    I think you want to show the bread crumb in your masthead to show the path to the actual navigation node.
    This functionality already exists in page title bar iview you need to just enable the options in the page title bar iview in your active framework page.
    If you want to have this Functionality in your masthead, just check the codes of page title bar iview and do similar coding in your masthead.
    NavigationEventsHelperService has alot of helper methos which will give you the currently clicked navigation path nodes and more. So also check them.
    NavigationEventsHelperService service =
                    (NavigationEventsHelperService) PortalRuntime.getRuntimeResources().getService(
                        NavigationEventsHelperService.KEY);
                NavigationNodes navNodes =
                    (NavigationNodes) service.getNavNodesListForPath(request, INavigationConstants.NAVIGATION_CONTEXT_ATTR);
    Regards,
    Praveen Gudapati

  • Navigation Paths in 4.0

    BO Enterprise 4.1, SP2, Patch 8
    Newly created Navigation Paths are not registering. 
    I created a report with 2 navigation paths (Date and Sales).  Everything was performing correctly in WEBI.  I added a 3rd Navigation Path (Location) and moved one of the elements from the Sales Path to the new Location Path.
    The report is still performing as if the new Path had not been created and the moved element were still in its original path.
    I have tried in both Rich Client and Launchpad, closed and reopened the report, even restarted the services.
    Does anyone know why this could be happening?

    Do you mean Firefox > History?
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.
    Go to "View > Toolbars" and check-mark "Menu Bar" with a click if you want to make that permanent

  • ELoad throwing error - Failed to find navigation path

    Hi,
    I have a script that runs fine in eTester but fails in eLoad with error - Failed to find navigation path when it tries to click on a dynamic link on a page. I think it records the text of the link based on what account I have searched on. If I iterate through my records in the data bank, the script runs just fine in eTester. However, it fails with the "Failed to find navigation path" error in eLoad. Any ideas?
    Thanks.

    Are you able to build the regular expression without the company data?
    For example if my html had this in it:
    <INPUT type="text" id=ticker name=ticker value="TER">
    and I want to extract TER to use somewhere else, I would create a custom variable with this regular expression:
    <INPUT type="text" id=ticker name=ticker value="(.+?)">
    I would have to make the regular expression smaller if the ticker was in there. For example if the html was
    <INPUT type="text" id=ticker name=ticker val= "Teradyne" value="TER">
    I would have to make the regular expression:
    <INPUT type="text" id=ticker name=ticker val=".+?" value="(.+?)">
    -GateCity_QA

  • Navigation path in SAP

    Hi,
    from easy access or SPRO screen how can we get the navigation path of a Transaction? like
    Logistics u2192 Logistics Execution u2192
    Internal Whse Processes u2192 Bins and Stock u2192 Display u2192 Total Stock per Material
    Is there any way to get the path directly which will be helpful in documentation

    Hi
    I hope I GOT YOUR QUESTION  correctly.
    U want to find out the path which u dont no whr it is exactly..
    If u want to find out the spro path from the field say u r in some screen say example
    XK01 - Vendor Creation  - Acct Group Field n u want to know the spro path for the same Just press F1 from the field n see the next pop up window.
    Thr u can find a icon called customizing.. just click on to that then ... enter the project name or click on with out project
    It will guide u to goto the spro path from thr u can choose in which broad area it was say "purchasing" or "Fina Acct" which u like to find or modify the spro settings
    Regards
    Ram

  • Differences in Data Source Navigation Path

    Can anyone tell me why some instances/implementations of WebLogic have different navigation paths to Data Sources? I've seen the following:
    Example 1: Domain Structure > Services > Data Sources (Console version 12.1.1.0)
    Example 2: Domain Structure > JDBC > Data Sources (Console version 10.3.3.0)
    I thought I had seen the path Domain Structure > Services > Data Sources in 10.3.3.0! Does anyone know if these differences are due to versions of WebLogic or whether they are due to different installation options, preferences, or something else?
    Edited by: user12702338 on Mar 19, 2013 1:16 PM

    Hi,
    Difference seen in path are due to versions, no issue with configuration/installations.
    Going back there were changes made for JDBC path between versions 8.1 and 9.2 also.
    Thanks,
    Ranjan

  • Dimension Library - Security on Dimension member - navigation path please?

    Hi,
    I have been going round in ever decreasing circles trying to find the exact navigation path to ADD a new member such that users who are members of a group can see it from within Dimension Library... specifically my Account dimension has a new top level member.
    Hyperion Planning 11.1.2.0.83, can anyone enlighten me as to the precise key clicks please, the manuals / forums are not helping on this.
    thanks,
    Robert.

    Hi John,
    apologies if I do not make sense... let me explain.
    I have created a new account in the shared library and shared this with the planning application to 'hang' a whole hierarchy off which I import via the interface tables.
    This all works fine when I am logged in as Administrator, but the users do not see the new member or any of its children, so I am assuming that this is a security matter.
    Now the functional security is configured via shared services, but I had thought that Dimension / Account / Member security is configured via the dimension library - am I looking in the wrong place?
    thanks for your time,
    Robert.

  • Create a Custom Navigation Path / Custom Hierarchy in IDT

    Hi,
    I have a Bex query and hierarchy built on Navigational attributes (In other words Flat Hierarchy) but my users dont like the way hierarchy is set up when we execute the report. Bex query is built on MP. For example, In the Bex query designer I can see my Product dimension and in that dimension I can see various characteristics / nNav attributes which are used to display flat hierarchy in the report when executed.
    I know we can customize the hierarchy in IDT as a custom navigation path.
    My question is that Is it possible to use Bex query as a source for universe in IDT and then achieve this customize hierarchy objective OR Can I directly use the Bex query for Webi interface and still customize the hierarchy like Custom Navigation path.
    Can I see my Navigational attributes of Bex query in the universe (IDT) OR Webi as dimension so I can use them for custom navigation path.
    We are using BOBJ 4.1 SP 1
    Thank you
    NI

    Hi,
    you can build a Universe on a BEx Query to leverage the OLAP functionalities. You can create a relational Universe on top of a BEx Query but this is not really recommended.
    I would highly recommended you connect WebI directly to your BEx Query using the BICS interface. With the BICS interface we support more BEx Elements as via the relational Universe.
    Regards
    -Seb.

  • Want to remove the Navigation path been displayed in Address bar

    Hi All,
    I am facing a problem with the url path displayed in the address bar of browser. Whenever i select a tab in TLN the url path changes. Normally it has to be like http://<host name>: <port no>/ portal but for me it is coming http://<hoatname>/<port no>/portal ? NavigationTarget=navurl://<somestring>. Can anyone tell me why it is happening so and how will i get rid of this. I dont want the navigation path to be displayed in the address bar.
    Thanks,
    Nishant Singh

    Navigation method does not depend on image path.
    There are two standard TLN iView in portal (I do not count one from AJAX Framework Page):
    1) Top-Level Navigation is the default one and based on portal component com.sap.portal.navigation.toplevel.default and consumes EPCM API.
    2) Light Top-Level Navigation is based on portal component com.sap.portal.navigation.lighttoplevel.LightTopLevelNavigation and uses navigation method by URL.
    I have used a image as background of the LTLN
    Whatever you do with the Light TLN in the area of customizing its style, it will always remains Light Top-Level Navigation with navigation method by URL.
    So the answer to your question is do modify com.sap.portal.navigation.toplevel.par instead of  com.sap.portal.navigation.lighttoplevel.par.
    Best regards,
    Aliaksandr Zhukau
    Edited by: Aliaksandr Zhukau on Aug 23, 2010 2:23 PM

  • Finding Peoplesoft Navigation Path by component or page name

    Hi,
    I wanted to know navigation path by component name /page name. I did some Google and found that we can get this in two approaches
    Find Object navigation' is the new content reference available to do this. You can find this under the navigation 'Enterprise Components -> Find Object Navigation'.
    It is also available in the navigation: Set Up HRMS > System Administration > Utilities > Portal Navigation Path
    We are using HCM 9.0 and Tools 8.49. Unfortunately there is content reference in Enterprise component as Find Object Navigation and in Utilities (Portal Navigation Path) too.
    Can anybody share his/her experience how to get to navigation path apart from running SQL Query?
    Thanks

    If verity is setup you can build the PORTAL_INDEX which will make the portal registry searchable. This will create a search index on your process scheduler, if it's not on the same server as the application server you'll need to copy it over. If you don't have SQL access, you may not have the ability to get this working either if everything wasn't already setup for you. I'm sure a google search on this will yield results in the blogs if you need more info but here's a link to the PeopleBooks 8.49 reference, http://docs.oracle.com/cd/E13292_01/pt849pbr0/eng/psbooks/tprt/htm/tprt06.htm#g037ee99c9453fb39_ef90c_10c791ddc07_2a8 and an example of what it provides. Other option I guess would be to post your component/page name assuming it's not custom and someone else may look up the navigation for you.
    >
    Search Results for 1099
    1
    Withhold 1099 Report Job
    Withhold 1099 Report Post / 1099 Report / 1099 Copy B
    Main Menu>Vendors>1099/Global Withholding>1099 Reports>Withhold 1099 Report Job
    2
    Withhold 1099 Report Post
    Populate table used to create 1099 reports.
    Main Menu>Portal Objects>Navigation Collections>Accounts Payable Center>1099>1099 Reports>Withhold 1099 Report Post     
    3
    Withhold 1099 Report
    Print year-end 1099 report to be sent to the IRS
    Main Menu>Portal Objects>Navigation Collections>Accounts Payable Center>1099>1099 Reports>Withhold 1099 Report     
    4
    1099 to Send Detail
    >
    Edited by: RCC
    Link wasn't working

  • Insert filename and path?

    Hi,
    Can you insert the filename and path into a footer in a ID document same as you would with a Microsoft Word document?
    Thank you,
    Barb

    With CS3 use a text variable.
    Bob

  • Insert a directory path and file name option

    I built a program that runs three tasks when a voltage triggers the data acquisition. I would like now to insert an option/control for two issues: selection of the directory where the data will be saved, and selection of the file name. How can I do this such that after I press 'start' I should be asked which is the directory where I want the data to be saved and then what is the file name?
    Another option would be the following: After I press 'Start' I will have a control where I can write or browse for the folder where I want to save the data; then I have another controller where I write the new file name. So in this case I should not be prompted except the case when I am trying to use the same file name.
    Where should I con
    nect this new subvi in my loop - before the tasksand before the trigger, or after the tasks and before the trigger?
    Thank you.

    Programming with LabVIEW might be fun but it is quite time consuming�
    OK, here is what I want to do.
    I have to monitor a machining process. I have to record cutting forces, power consumed, vibrations, and temperature. From each of these sensors I get a voltage as output and I used �Measurement and automation� and NI-DAQmx to program my tasks (I have LabVIEW Express running in Windows XP).
    The triggering of DAQ is generated by the input of a 4.5V DC when the CNC program starts; the stop occurs when CNC program ends and the output voltage becomes 0V. I have finished all the connections and now I have to build the vi.
    The �small picture� could be described this way:
    I want to record the parameters and save them in files that I could process later using specific vi.
    The �big picture� would be the following:
    I would like to build a stand alone program that will do the following: when I run the program [ i. e. double-click the shortcut (or the file)] a panel should come up in the center of the screen � in this panel I would like to be able to select what process am I going to investigate: grinding, turning, milling, drilling, tapping etc.
    Once I selected what process I am going to investigate, the front panel of a vi should come up � In this panel I should be able to select what parameters I am going to record: forces, power, vibrations, and temperature. On the front panel I should be able to see the waveform of the acquired data. A start/stop button and a led green/red for each parameter should show me the status of the acquisition (green is on, red is off). The start/stop button should allow me to �manually� start or stop the program at any time. Additionally, on the front panel I should also have icons with a choice for directory (folder) path, file name, and comments regarding the experiment. The date and time should be recorded in the file that is saved. There should be an option (check box or selection icon) for saving the data in binary or ASCII format.
    Similar to any program, the front panel should have a toolbar containing File, Operate and Help options. The File option should contain �Clear graphs�, �Setup DAQ� and �Exit� and the Operate option should contain: Use digital alarm, Use digital trigger, and Write data to disk with the option to be selected or deselected. The main front panel should close when I select File -> Exit.
    The File -> Setup DAQ selection should bring up another front panel in which I should be able to see the acquisition control panel (device, channels to get, buffer size, units � English or metric) and the calibration factors (for the tasks, including triggering voltage) including sampling rate.
    Well, that�s almost all. I understand I cannot do this all at once. Unfortunately, I have a very close due date in getting the system up and ready. I am hoping that I could get some help setting up a simple program and I could develop the rest step by step later...
    Can anybody help me with this program? I have attached a first attempt that would allow automatic triggering and stopping as well as displaying of forces, power and acceleration.
    Thank you in advance.
    Radu
    Attachments:
    Acq_Graph_Voltage-Int_Clk-Dig_Start_Ref_TRIAL1.vi ‏201 KB

  • Insertion of relative path of dtd failing with XMLType

    Hi
    We are using Oracle10g as the database and want to insert an xmltype data in the table.
    The problem is with the xml contains one relative path of the dtd file, which is existed in the local file system.
    Code snippet follows,
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE worksheet SYSTEM "../../Core/Library/worksheet.dtd">
    <worksheet name=".*">
    <import file="FormListsAdminStandard.xrl"/>
    <layouts>
    <formlayout name="STANDARDADMIN" layout="Flow" location="top" >
    <page name="first">
    <input name="applicationKey" displayName="Application Key" type="comboBox" listName="Application_Key_List" width="80" height="20"/>
    <input name="eventPeriod" displayName="Event Period" type="textBox" width="80" height="20"/>
    <input name="period_in_days" displayName="Period in days" type="numberBox" width="80" height="20"/>
    <input name="noOfdays" displayName="Number of days" type="numberBox" width="80" height="20"/>
    </page>
    </formlayout>
    </layouts>
    </worksheet>
    Please let me know any ideas
    Thanks in advance
    Sirisha

    Writing this function yet again, hoped there was an easy way to get the parent directory directly (as a property?)
    I followed Luca's link, but the VIs referred to there don't take LLBs into account (they'll strip parent EXE but not a parent LLB.)
    The attached VI handles LLBs and outputs VI prefix, "Is EXE?", and immediate parent-path as well.
    Message Edited by Dynamik on 11-15-2005 11:59 PM
    Message Edited by Dynamik on 11-16-2005 12:01 AM
    Message Edited by Dynamik on 11-16-2005 12:02 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!
    Attachments:
    Util.VI.ParentDirectory.vi ‏38 KB

Maybe you are looking for