"Insert a recordable DVD disc"

No matter what I do, iDVD keeps saying "Insert a recordable DVD disc."
I've got DVD-R and DVD+R discs, but it won't take either.
This is a brand-new iMac.

call support. If its new you must see if it is a problem with the drive itself.

Similar Messages

Wont burn. Error..."No disc is in the drive. Insert a recordable DVD disc."

Get error message "No disc is in the drive. Insert a recordable DVD disc."
After multiple attempts with "Staples Brand" DVD-R (up to 16x Speed) and DVD-RW (up to 4x Speed) Recordable & Rewritable Disc. I tried every disc in the package (12). None of them will burn? The DVD player still functions. So I don't think it's a hardware problem. Any body got any ideas?

I have burned to "Staples" media in the past (about a year ago).
Staples, and many other 'big box' stores, buy their own brand media from low bidders and so it can come from many sources.
If it was dust, wouldn't that also effect the read ability?
Not necessarily.
I was leaning towards the "Cheap Media" as the main problem
So am I.

IDVD Error: "Insert a recordable DVD disc"

I created a project in iDVD ready to be burned but each time I insert a disc, before any burning begins, it is ejected with this error message: "Insert a recordable DVD disc". I have tried several different DVDs but nothing works. I came across this problem in a lot of forums but with no successful answer. Does anyone know what to do in this situation???

iMovie doesn't do any authoring of the disks, so of course it has 'no issue.' iDVD is the authoring program that actually accesses the DVD disk with a direct burn. Disk Utility recognizes almost any disk, but it also is not an authoring program. When using DU for burning, you are burning from the disk image created by iDVD.
For the best burn success, follow all the others' advice. I use only Verbatim DVD-R disks, burn at 4x or less and have never had a burn issue. My disks play on all DVD players that I have tried. The only issue has been a particular brand of DVD player that misreads some audio tracks, but the other players read all of it just perfectly.

"Disc Insertion - Insert a recordable DVD disc"

I get the above error message when trying to burn a project to a DVD. Our eMac will does not 'recognize' DVD+R discs. Says disc is unrecordable. (We upgraded to Tiger 10.4.6 just so we could put movies on DVDs.) We have tried 4.7GB Verbatim and 4.7GB Maxell with no luck. This is the information from the profiler on the CD/DVD drive:
PIONEER DVD-RW DVR-104:
Firmware Revision: A227
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Very frustrating - can anyone tell me what's going on or what to try?
eMac Mac OS X (10.4.6)

CD-Write: -R, -RW
DVD-Write: -R, -RW
There's your problem. It says it will only burn DVD-R, not +R. The only solution I know of is to get -R DVDs instead.
533MHz Powermac G4; 768MB RAM Mac OS X (10.4.7)

Burning iDVD to DVD disc with i Book G4 combo drive and external DVD drive

7/6/2006. After much recent experimentation with iLife, iMovie and iDVD, I found how to use themes and set up movies in my iBook G4 purchased two years ago near Chicago (updated to OS 10.3.9). To burn an iDVD file to a DVD disc on a "combo drive" (that is, it has no DVD writer drive) iBook or other comparable Mac, go to File on the top horizontal tool bar and down there to "burn to DiscImage." Depending on the size of the file, it will take about four hours for every hour of movie file to encode it. I just set it up that night, went to bed and woke up the next morning with it finished. Once encoded, it doesn't need to be encoded again and can be used in the future. But Toast 7 Titanium will not burn it to an external DVD writer as "video." but it will burn the video file as "data." And pretty fast. The 'data' file still remains a video file and will do everything the video file does, only now from an external round DVD disc, too. I discovered this by accident, although Matt (tech support) reminded me about DiscImage. Later, David (also in tech support) told me to download newer versions of iDVD and iMovie, but that did not work, nor had he ever tried it. Remember for a combo drive and using iDVD, and also iMovie, under File burn to DiscImage and save on an external disc as "data." My external DVD write is by LaCie. Best wishes. Chuck Yopst [email protected] Chicago area.
iBook G4 Mac OS X (10.3.9)
iBook G4 Mac OS X (10.3.9)

Like altero said, you're not using Toast properly... Follow these directions:
Suggest you create a disc image from iDVD and then burn the DVD. In iDVD: File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Recorded DVD not recognized in drive

I inserted a recorded DVD (DVD+RW) in my buddy's MacBook running Tiger, and a dialog box says the disc is a blank disc. It isn't, because it plays in other Macs, PC's and DVD players. is there a special setting he should be using to be able to play this DVD?
TIA

Go out and buy an external hard drive known to boot that kind of Mac.
Run the operating system installer that came with the machine and install on that hard drive after formatting it GUID with Disk Utility's Partition section.
After installing the operating system on that drive, select it from Apple menu -> System Preferences -> Startup Disc and click on restart.
Insert the dodgy DVD+RW.
If it fails to work, you know the optical drive is the one that won't play those kinds of discs, or it is damaged.

I've burnt a slideshow of my photos onto a DVD disc but it will not play on my DVD player. It plays ok on my acer laptop. I burnt the same disc with slideshow from my old dell computer

I've burnt a slideshow of my photos on my Apple Mac to a DVD+REW disc but it will not play on my DVD player or on a combined DVD/TV. However it will play on my wife's Acer laptop. I then erased the disc & burned another slideshow from my ancient Dell computer onto the same disc &it played just fine on everything. So it seems the problem ids somewhere in the Apple Mac process. Any ideas?
Keith C

Gary Scotland wrote:
If you want to play material on a dedicated DVD Video hardware player, you must create a DVD video disc, and you must use a DVD authoring application.The software creates files that the DVD video player can play and will burn them to a recordable DVD disc. Examples of applications are:
Roxio Toast and iSky DVD Creator
Mac's used to be supplied with iDVD authoring software but Apple discontinued it in 2011.
Thanks for that. Will need to check iSkysoft out. I am in the process of looking for a VisualHub replacement/backup. Especially when it comes to ease of use. Toast is ok. Just looking for something along the lines of VH.

IDVD won't open with OS 10.5.8 -can't record on to blank DVD discs

When I attempt to open iDVD application, message says it won't open with this OS. Also when I insert a blank DVD (Verbatim) disc am unable to record a film on to it as I get this message: "The disc can't be burned because the device failed to calibrate the laser power for this level of media." I've seen this message on a previous post on this forum but could not see any solution posted. I have recorded onto DVD discs in the past (different make of disc and before I upgraded to Leopard).
I can record on to blank CD audio discs without any problem however.

The first thing to try (IMO important) is not to import directly from your camera. Get a Firewire-connected card reader (USB works also but is slow on Macs) and use the Mac's Finder to copy images from the card to a folder on the Mac hard drive. My description below describes a CF card, but the workflow is the same for an SD card or whatever.
I feel pretty strongly that camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and faster cards are preferable, and Firewire is much preferable to USB2.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive.
• Eject CF.
• Burn DVD copies of the original images (optional backup step).
• Eject DVDs (optional backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
Good luck! The camera-to-Aperture workflow may or may not be the cause of your specific problem this time but in any event card-to-finder long term will provide a more solid workflow.
-Allen Wicks

Can't insert a CD/DVD into the disc drive. Recently installed a new harddrive, and the CD/DVD drive hardware is no longer recognized. Also, with new harddrive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP.

Can't insert a CD/DVD into the disc drive. Recently installed a new 1 tb hard drive, and the CD/DVD drive hardware is no longer recognized. Also, with new hard drive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP (2.2 GHZ Intel Core 2 Duo. 4 GB 667 MHZ DDR2 SDRAM)

Also, when I check out the hardware list, under Disc Burning - the following is reported: No disc burning device was found. If the device is external, make sure it’s connected and turned on.
The disc drive worked fine prior to the HD upgrade and OS update to Mt. Lion.

Can i insert 8cm dvd discs into my i Mac?

Just wondered as i have a Sony Handycam which records straight onto the small 8cm DVD discs which you can just finalise and play in a normal dvd player straight away. I didnt want to slip it into my new iMac and get it stuck. Also whats the procdure once its in there? Can i just simply copy it to the hard drive and produce a copy? Any help or advice much appreciated.

Hello, Your 24" Mac will eat the disc. If you have an external dvd, use that. Some of the older Macs that have a tray loading dvd will---sometimes be able to. But yours will suck it in and forget to spit it back out!!!!
Try to import it via firewire.
P.S. Questions like this should be posted in the iMac discussion group..
Good Luck

"please insert a blank dvd-r disc" over & over....

Hi, I'm running iDVD 4 and trying to burn a movie+slideshow I made in imovie onto memorex DVD+R's. I click 'Burn', it asks for a blank disc, I insert a blank disc, after 5 seconds, it ejects and asks for a blank disc over and over. I've tried quite a few discs from my stack, same thing every time. I have burned a project with these same discs in the past. Any ideas?...
Thanks!
Imac G5 Mac OS X (10.3.9)

Hi
I've experienced this to. No my DVD discs wasn't tuched. I think I did as follows.
Closed all programs incl iDVD.
Deleted iDVD pref file.
iDVD
-->/Users/YourName**/Library/Preferences/com.apple.iDVD.plist
Started a NEW iDVD project and re do it.
What versions of: (are You using ?)
- iDVD ?
- QT ? and
- BTW what brand of DVD discs ??
I recommend Verbatim DVD-R nothing else. Tested many with more or less
problems. Only this I really can rely on. Sorry
Yours Bengt W

Can anybody help me? I inserted a small size of DVD disc into the macbook. Now it doesn't work nor eject the disc. Please help how to do? thank you

Today, I did a stupid things that I inserted a small size DVD disc which is a user manual for my sport cam. However, it doesn't give me any response nor ejection of the disc. I really have no idea how to take out the disc from the optical drive. Could anyone help this out? thank you very much. CY

Your not the first (if knowing that helps). There's a fairly lengthy disussion about similiar situations in the link below. Perhaps there's something in there that will help. Good luck with it.
https://discussions.apple.com/thread/2283444?start=0&tstart=

I can not burn a cd from my iTunes as it says i have inserted a dvd disc

why can i not burn music to a disc this msg is what comes up.
This comes up first Disc Burner: HL-DT-ST DVDRW GA32N
Then this comes up
You have inserted a blank DVD but originally selected a CD format. Are you sure you wish to create a data DVD instead?
And it will not let me burn pls help. Annoying

You are positive you put in a CD? You have tried another one?
You have restarted the computer?
How old is this drive?

Burning A DVD Disc That when inserted appears as Three seprate discs

hello everyone i am trying to Burn A DVD Disc That when inserted appears as Three separate discs such as if it had been partitioned but disk utillity.app can only partion a disc once.
I have a SuperDrive and have used it before so i know it works and that i have one.
If anyone has an idea as to how i may do this i would really appreciate any help you have.
Thanks -KKNUPP

kknupp
You dvd has been written in sessions (three in this case).
You can copy all the data from the original DVD into one folder and burn the folder onto another DVD.
Do you want to make your life harder? Do the following: start Disk Utility (inside /Applications/Utilities) and click on the new image icon on top left. Pick a name for the image and specify the size (4.7 or 8.0 GB depending on the size of the original DVD as well as the rest of parameters from the drop down menus: encryption-none, format-read/write. Save the image and expand it (open it). Coppy all the required data inside it and burn it.

When i insert a blank DVD, appear a message "The disc can't be burned, Because the device failed to calibrate the laser power level for this media."

when i insert a blank DVD, appear a message "The disc can't be burned, Because the device failed to calibrate the laser power level for this media."

when i insert a blank DVD, appear a message "The disc can't be burned, Because the device failed to calibrate the laser power level for this media."

"Insert a recordable DVD disc"

Similar Messages

Maybe you are looking for