Insert an extracted object on power point.

I extracted an object from a picture using photoshop elements 5 and am trying to place it on a power point presentation. The problem I'm having is that when the object is inserted on the power point slide it is on a square of diagonal lines. I'm stuck so any help would be appreciated. Thx.

I think you have save an alpha channel with it. In Elements, you can save an alpha channel selection by using the Selection<Save Selection. You just don't have the capability to view/work with the alpha channel as there isn't a channel's pallette in Elements. You can, however, Save and Load them.
Have a look at this tutorial.
http://www.indezine.com/products/photoshop/exporttiffwithchannel.html
and...
http://www.indezine.com/products/powerpoint/ppalpha.html

Similar Messages

How can i extract text from Power point files,wod files,pdf files

hi friends,
i need to extract text from the power point files,word files,pdf files for my application.Is it possible to extract the text from the those files .If yes plz give solution to this problem.i would be thankful if u givve solution to this problem.

My reply would be the same.
http://forum.java.sun.com/thread.jspa?threadID=676559&tstart=0

Formula Syntax in MS Word and Power Point - SmartView 11.1.1.3

I want to insert HFM hsgetvalue formulas in MS Word.
Therefore I insert a Data Field from MS Excel to MS Word with the Menu “Hyperion” – “Insert Data Point”.
The result formula in Word includes an encoded Part as to see in the copy below “|SmartView 13218724230|”.
Is it possible to change this encoded part with a “normal” formula like the first part “= HsGetValue("", "Period#P03", "Account#K0")” and how is the formula syntax?
Can I insert such formulas in MS Power Point too, if yes, how can I do this ?
Thanks for your help !
Edited by: .Martin. on 23.01.2012 15:04

I'm sure it could be done with some SV VBA magic.
Thank you,
Todd Rebner

Insert PDFs into Power Point with Adobe Reader 10 doesn't work

Hello,
When I try to insert a PDF Document into a Power Point Sheet (Microsoft Office 2003) the following an error occurred: "Die Serveranwendung , die Quelldatei oder das Element konnte nicht gefunden werden oder ein unbekannter Fehler wurde zurückgemeldet. Installieren Sie die Serveranwendung unter Umständen erneut." In English it would be somethink like: "Die Serverapplikation, the sourcefile or the element could not be found or an unknown error get recalled. According to the circumstances install the serverapplication again."
The error appears when I click in Power Point on "Insert" then on "Object" and then on "OK" if the Adobe Acrobat Document is selected. The error occurred since I use Adobe Reader X on Windows XP and on Windows 7.
Have anyone any idea, or know a solution?
Greetings from Cologne

Hallo Andreas,
hier wie versprochen die Keys um den Geschützen Modus per Gruppenrichtlinie zu de/aktiveren.
Der Key für Geschützer Modus wenn er aktiviert ist lautet:
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0\Privileged]
"bProtectedMode"=dword:00000001
Und demensprechend lautet der Key für den deaktiverten "Protected Mode":
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0\Privileged]
"bProtectedMode"=dword:00000000
Hallo Werner,
wir benutzen hier Windows 7 x64, sowie Windows XP x86. Allerdings haben wir bei beiden Systemen keine Probleme wenn wir den Geschützen Modus deaktiveren.
Kannst du mir vielleicht noch die nachfolgenden 3 Fragen beantworten, damit ich ein bessere Vorstellung vom Problem habe?
Welches MS Office (bzw. PP) nutzt ihr?
Über welchen Weg bzw. über welche Funktion wollt ihr das PDF in PP implmentieren/einbetten?
Wie genau lautet der Text der Fehlermeldung?
Grüße aus dem verregneten Köln
Eike

CAN´T INSERT PHOTOS TO POWER POINT & WORD

I have photos now installed in my Mac, but can´t see the photos archive in power point . If I use keynotes it´s okay but the problem is power point, word....
Can anyone please help me!
Thank you.

Thanks Matt, that worked. It's kind of annoying, however, because that's not the way Help explains it...
"You can paste a new video clip or photo over an existing clip while retaining the audio from the original clip. The video cuts away to a new picture, but you continue to hear the sound from the original clip.
To replace images in a clip while maintaining running audio:
Choose iMovie HD > Preferences, and then click General.
Select the "Extract audio when using Paste Over at Playhead" checkbox.
Select the video or photo that you want to insert.
Choose Edit > Cut or Copy.
Do one of the following:
To paste the entire video you selected in step 3, position the playhead at the first frame to be replaced. When you paste the clip, it will replace a portion of video equal to its length.
To paste over a specific segment of your movie, select the part of the video clip you want to paste over. (To learn more about selecting part of a video clip, see Related Topics below.)
If the video you're pasting is longer than the selected frame range, the excess video will not be pasted. If the video you're pasting is shorter than the selected frame range, the extra space will be filled with a color clip (or the still image, if you paste a still image).
Choose Advanced > "Paste Over at Playhead."
The audio track of the original video is retained and appears in audio track 1 of the timeline viewer."
Anyway, thanks again. I'm going to feedback Apple about this.
Joe

Now I have to covert my i tunes to MP-3 formate to insert them into a power point presentation These songs are in my i tunes library on my computer I know how stupid it sounds how to I get them into a file on my computer seperate from my i tunes library

S LIKE i BOUGHT SONGS NOW THERE IN THIS I TUNES LIBRARY THING NOW HOW TO GET THEM INTO A FILE SEPERATE IN MY DOCUMENTS ITS LIKE HOW DO i BREAK INTO THE I TUNES STORE ON MY COMPUTER AND GET THE MUSIC i BOUGHT AND PUT IT INTO MY COMPUTER FILE DOCUMENTS SO i CAN PUT IT INTO POWER POINT PRESENTATIONS AND IN A FORMATE COMPATABLE WITH WINDOWS POWER POINT. I DID IT ONCE SEEMS LIKE I FORGOT THE RECIPE I DID IT WHEN MY KEY BOARD WAS DOWN JUST WITH THE MOUSE I MAILED IN MY LAP TOP GOT THE MUSIC OFF INTO A M-P3 PLAYER GOT IT BACK GOT THE I TUNES CARD DOWNLOADED SONGS NOW THERE TRAPED IN MY I TUNES LIBRARY LOL !!! ???

One way friends of mine have done it....use iTunes to burn a music CD with the songs (presuming it can still do that, haven't tried it in a while)
THen close iTunes and open windows media player. Use that to convet the CD file to MP3 (media player's default is to pull things in as wma, so you may need to change the preferences to mp3, or i'm pretty sure wma's work in power points)
Once media player converts the format you can insert it into your powerpoint.

Objects not aligned in output power point as in project xcelsius2008 sp1

Hi everybody,
I need help...
first of all, apologise me for my english...
my principal problem is to create graphics with a legend that can be interactive with the line of the graphic... is there a function about this?
The only thing I've found to solve my problem is to create many switches buttons and put them over the legend's label, but, when I try to export to PPT this objects are not aligned with the legend's text so the result is not useful and with a bad look...
I've tried to use ceck boxes located near to the legend baut happens the same problem.
If I export in html it works properly... but I net the power point..
Thanks very much
I hope someone can help me...
Maurizio

Hi Javier Jimenez,
thanks again for the new suggestion!!
in effect this could solve my problem cause the trasparency doesn't let to see if the new icon I put over the legend's icon is not perfectly aligned!
in Italy we say : "It was the Coloumb's egg!" .. it means that if I'd thought enough, may be I'd have solved the problem by myself...
Thanks again!
If I can take advantage of you, the big problem for us is the heavyness of our swf inside ppt....
I'll try to explain..
excel file inside the project has 837 cells to be used for my graph (13 item in Coloumn x 65 item in Rows)
this because we need to create a graphic to be able to show a trend of about 2 years, which increase (filling the empty cells) every month...
so many informations, so many objects (icon, etc) tell me, is too much isn't it?
because when I've exported the file in ppt, every time it takes 1 minute only to open that chart...
is possible not to include the excel? could be a solution to take the information from an sql DB ?
thank you very much!
Maurizio

Cannot Place Quick Time Object Controller in Power Point

I get a Visual Basic Error message that reads "Object library not registered" when I try to place a QuickTime object on a Power Point slide. Can anybody help me figure out how this can be done? I need to embed a Quick Time movie into a Powerpoint presentation (without having to link to it) It can be done with Flash and Real video, but for some reason I cannot get it to work with QuickTime. Does anyone have any experience with this? Do I need to buy QuickTime Pro in order for it to work?
Thanks,
Greg

You could look to use Presenter to create quiz question slides in the PPT deck, and then the Mobile viewers should see them and be able to interact (I think).
The issue with the SWF file is Apple considers that SWF to be a real-time change to the code of the room, and disables it as that is against their policy for apps. So I'm not sure that there is anything you can do differently to your SWF to make it work. Have you tested loading the SWF directly into a share pod, without the PPT? Not sure that that would result in anything different, but worth a try.

Inserting a page from power point

Please help me with this...whenever I try to insert a page taken from a different power point presentation, the page is always inserted to the left at a 90 degree angle. How do I switch it around so that the paper appears at the right view? When I try "arrange" at a different view, it doesn't help.
Thank you.

Technically, you can open an an URL inside of a web page
using the IFRAME tag in HTML. This may not be the right thing to do
if the owner of that page does not give you approval to do so.
A Flash movie (swf file) will not play in Design View unless
you use the Play button in the Property Inspector. You can see the
Flash movie play if you preview the web page in a browser (F12 or
Preview in Browser from the File menu).

How can i extract the text from the PDF files,Power point files,Word files?

hi friends,
i need to extract text from the PDF files,Power Point,Ms word files.Is it possible with java?if yes how can i extract text from those files.please give solution this problem.i would be thankful if u provide solution.
regards,
prakash.

Find an API which could read each of those files and start coding.

Inserting a video into Power Point Slide

I am using Power Point 2011 version 14.4.5 on my MacBook Air with OSX 10.9.5. When I insert a video clip (mp4) into a new slide it plays fine but when I close the reopen the file it is a picture of the first frame and I can't play it.

farmerpete
What version of Premiere Elements are you working with and on what computer operating system is it running? What version of PowerPoint do you have? Background information for now.
A prel file is the project file for a Premiere Elements project. It is not a video file that can be imported into non supported software.
You cannot even open a Premiere Elements project prel in another project.prel.
You can create a Timeline in a Premiere Elements project and export that Timeline to a file saved to a format that is compatible with PowerPoint.
And, then you Insert/Video that file into your PowerPoint presentation. With Microsoft PowerPoint 2010, this seems to be what is supported video-wise
Please review, and then let us know if you need clarification on any of the above.
Thanks.
ATR

Extracting data from Ms power point ?

Hello every one
My application is to draw the user defined symbols on the map area . And then represent the
whole map along with the shapes drawn on it in labview 2d picture control
So,
1 While reading the image from power point is it possible to seperate the Back ground image map
and the shapes what we had drawn , so that i can save them seperately and represent when ever
user is in need of them in 2d pic control.
Please see the attached vi
Attachments:
Power point with labview.zip ‏190 KB

Hello Pankaj
This is the attached vi in 2011 format
Attachments:
Power point with labview.zip ‏187 KB

Power point project won't move to the next slide

I create a project with several power point slides and then some automation and then slides again. The automation created within captivate moves from slide to slide. But the power point slides don't move to the next slide automatiacally. I have to click on next to make them move. I looked in the manual and can't find a source to tell me what to do with the slides to make them move automatically (like a slide show would be). Any suggestions?

Hi there
When you import a PPT, you have two options. One option allows the PPT to just play through. The other option inserts a Click Box object on slides that prevents the slide from moving forward until clicked by the user. The choice is made in the dialog.
The default is On mouse click. After your slides arrive, the timeline looks like this:
To allow the slide to move forward, delete the Click Box.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Adobe Fillable Forms in Power Point using Windows 7

Hi,
I have created fillable forms using Acrobat. Then I inserted them in a Power Point presentation slide, one in each slide. I used the "Action" function for the object to "Open" with mouse click in the presentation. Using Adobe Reader as my default viewer it worked fine on an XP system but with Windows 7, when I click the form before starting the presentation it only opens in "minimized mode" and you have to click it to have it open. When you start the presentation and click on the form icon it moves to the next slide in the presentation. I would be very gratefull for any help.
Manny Acosta
[email protected]

Hi George,Thanks for your reply. I am looking into the new Acrobat program and will be looking into setting up a PDF presentation with it. I am kind of new to this so I will learn as I go.Again thanks for your suggestion. Manny Acosta
Date: Tue, 13 Dec 2011 16:53:31 -0700
From: [email protected]
To: [email protected]
Subject: Adobe Fillable Forms in Power Point using Windows 7
    Re: Adobe Fillable Forms in Power Point using Windows 7
    created by George Johnson in Adobe Reader - View the full discussion
Another option is to use PDF for the presentation. That's what I've done for many years now and haven't looked back.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4083014#4083014
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4083014#4083014. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Was working on building Power Point using photos from IPhoto

Also using Aperture to pull photos for presentation. Suddenly in Aperture, I lost my two most recently imported files and can't relocate. Please advise if you've had the problem. I've also discovered thatnow I'm not able to export ANY photos out of Aperture, but get the pop-up that says "Versions with Unavailable Masters Can't be Exported. Try Again". It makes no difference dates of projects/album. Pop-up occurs regardless. I'm absolutely frozen in Aperture and have lost the two most recent files. Please help, I've still got things to place in Power Point Slide Presentation. Thanks. BigDJimbo

Leonie; regarding the exporting, I'm confidant that I hit the right button to get from either Iphoto or Aperture 3 to my desktop in order to insert into the Power Point.
As far as relationship between IPhoto & Aperture, I merely had both on the laptop with the IPhoto storing the majority of my photos up until I made the commitment recently to use Aperture 3 exclusively so my more recent new photos were downloaded from my Nikon directly into Aperture before doing post production and then were stored in project files to access as needed at a later date.
On this particular project, I went straight to IPhoto when there was a file I needed, hit export and put them into Desktop where I would retrieve them as needed for insert into the Power Point. Likewise, photos that had been downloaded and postedAperture files were exported the same way.
One other thing that might shed some light on this entire mess is that on both of the lost projects, I had gone into them to extract select photos to share with family and friends after I'd done my post production work on them. These photos were then exported to Desktop and were later inserted into e-mails for sharing. The shared photos I've found in the Aperture Library, but the hundred or so other "unprocessed" photos in the same Aperture 3 project are no where to be found. Go figure.
Thanks again Leonie for your input in solving this mystery.
Jim

Insert an extracted object on power point.

Similar Messages

Maybe you are looking for