Insert audio and video icons is split
why are these 2 buttons divided and that there is a single button that makes it possible to insert video and audio at once into the timeline
As Jim says...use the Insert / Overlay Icons to do what you want.
Those other two are handy for separately dragging audio or video.
As Harm says...you can drag both by click and hold in the centre of the Source Monitor. You can drag to the timeline or the Program Monitor (and also use the CTRL mofifier key)
I always wished that when one clicked the Audio Icon..it would show the audio waveform in the Source Monitor. Unfortunately ...it doesnt!
Similar Messages
-
Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit
Any solution to the Audio and Video issues on Split X2 13" laptop after Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio. The video is clear but also being played in repeated frames as it moves slowly forward!- sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided?? Regards - VK
I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27
-
Splitting an audio and video file
i know before quicktime 7 came out you could split the audio and video track and stuff. can you still do that. i have a music video of live stuff and i want the audio from it. i also have final cut, garage band, and all those fancy programs so if you can do it there i would appriciate some knowledge thrown my way.
yes well im not supposed to be doing this but its a locked aac audio file. i downloaded it off itunes but my girls birthday is commin up and i need the audio half of it for a thing im doin. so i figure if i dont let anyone else have it its ok becaus i bought it. um the video is avc0 media. i can use a screen shot to show all of it.
-
I have noticed a few changes to my FCP workflow after installing FCPX from the trial version I had before. I've noticed that when I sync audio and video files together via Clip > Synchronize Clips.. the icon at the top left corner of the thumnail is no longer there as it was in the trial version. I also have to right click and select 'open in timeline' to work on the files. I much preferred clicking on the thumnail's icon in the event library and it opening up in the timeline. Also Stabilization is missing from my video effects! How odd.
I no longer have the trial version this is the point. Bought the 'release' version about 6 weeks ago. Still doesn't explain why the stabilization option randomly appears for some clips and not for others. Also would like to know if I can get the compound icon back on the thumbnails for synchonized clips.
-
Splitting output source of audio and video.
I would like to split the output of my audio and video signals from my ipad. I have a projector which i want the video signal to be sent to via a cable connection from my ipad with the audio being sent to my amplifier and speakers via apple tv. I'm basically trying to avoid running a cable from my amplifier to the projector as it is about 30m away. Is there an app available for this or something simple i'm missing? thanks
my setup is as follows
Room 1:
TV
Amplifier
Apple TV
Surround sound wired to amp
Room 2
Projector
Speakers wired to amp in Room 1
I was hoping to sit in Room 2 with my ipad connected to the projector, selecting a movie and getting audio through the wired speakers (streamed to apple tv in Room 1). Hopefully this makes sense. I use the AirVideo app at the moment for all my viewing in Room 1. -
Hello,
How can I insert videocuts into a show I recorded myself? I am in the studio, presenting a show and during the presentation I want to show pictures and video to the audience.
* I wil first record the show in our studio
* And then I insert pictures and video on certain places in the recorded show.
Is this possible in Imovie 8 or in one of the older imovies.
Or must I use finalcut for this?
Thanks! Richard - The NetherlandsHello, Richard,
I have not used iMovie 8 much, so don't know about doing this in that version, but you can easily do this in iMovie HD 6.
I am not sure exactly how you want to do this. It depends on whether you want to place those photos and other video clips OVER the recorded show, so that the audio from the recorded show plays while the photos and videos are displayed, or if you want to have them ADDED in the midst of the recorded show.
If you just want to insert photos and videos in the midst of your recorded show, first import your recorded show into iMovie6. Put it in the timeline. Move the playhead to the point where you want the first photo, and do a 'split video at playhead' command, drag the photos/videos to the time line there. They will be added between the split video clips. Repeat for all the photos/videos.
It sounds as if the option you want is 'Paste Over at Playhead' which allows the photos and videos you add to be seen over the recorded show, so that the audio plays continually. In tv and movies this is done when someone is talking about something and then there is a 'cut-away' to a photo or video clip of whatever the person is describing so the audience can visualize what he is saying while he is speaking.
Here are instructions for doing that from iMovie HD6 Help:
*Inserting video clips or photos in a passage while maintaining running audio*
+You can paste a new video clip or photo over an existing clip while retaining the audio from the original clip. The video cuts away to a new picture, but you continue to hear the sound from the original clip.+
+To replace images in a clip while maintaining running audio:+
+Choose iMovie HD > Preferences, and then click General.+
+Select the "Extract audio when using Paste Over at Playhead" checkbox.+
+Select the video or photo that you want to insert.+
+Choose Edit > Cut or Copy.+
+Do one of the following:+
+To paste the entire video you selected in step 3, position the playhead at the first frame to be replaced. When you paste the clip, it will replace a portion of video equal to its length.+
+To paste over a specific segment of your movie, select the part of the video clip you want to paste over. (To learn more about selecting part of a video clip, see Related Topics below.)+
+If the video you're pasting is longer than the selected frame range, the excess video will not be pasted. If the video you're pasting is shorter than the selected frame range, the extra space will be filled with a color clip (or the still image, if you paste a still image).+
+Choose Advanced > "Paste Over at Playhead."+
+The audio track of the original video is retained and appears in audio track 1 of the timeline viewer.+
Post back if this does not address what you are trying to do. -
Audio and video is out of sync!
when I record audio and video together with my isight built in camera on my macbook pro with either quicktime pro, photobooth or imovie, when I play the clip back the audio and video is out of sync! like watching a kung foo movie. I've tried everything, I've taken my book into see a "Genius" at thew mac store and he said to me that the isight is made really for video conferencing and is really not supposed to be fully in sync? Uhh thats weird, so mac makes a product and puts it on all their laptops and it only sort of works?? I've been on the phone with apple care, did a bunch of things like disk utility repairs on permisions, then used the startup disk to do another permisions repair. I've uninstalled quicktime pro and re-installed it a couple of times? If anyone could give me some advice that would be great! I'm a little frustrated as you can probably see! thanks
cheers
mWelcome to Apple Discussions, m
See if any of the suggestions offered here reduce your sync quality problem enough:
http://discussions.apple.com/thread.jspa?messageID=7089133�
If, after making certain that your Mac is running well, has plenty of free space on the correct drive, etc., your sync is still not close enough, you can manually re-sync any parts that are unacceptable to you using either QT Pro or iMovie.
If you check carefully, you will see that not even pro video is always perfectly synced. It is a lot of work to get things "nearly perfect," but, with a bit of practice, it doesn't take long to get things "close enough" for me.
I use the same simple process with either QT Pro or iMovie, so you can use whichever you find easiest. Whichever you use, keep the original AV clip safe and *_work on a copy_* in case something goes wrong.
If you do not already know how, here is my process, but you can adjust for your workflow:
(1) Copy of the audio track.
(2) Add the audio track copy to the AV file.
(3) Silence the original audio and work on audio copy.
(4) Insert small blank audio clips (or split and slide if using iMovie) if needed to make the audio later.
(5) Cut small bits out of quiet parts (or split and shorten in iMovie) if needed to make audio sooner.
(6) Repeat until satisfied and delete any tracks no longer needed.
(7) Save the adjusted AV file.
(8) Enjoy!
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
8.1 Pro install now have no audio and video play
I have an older G60-443cl and changed out the HDD for a SDD. Installed a new version of Windows 8.1 Pro. Everything works but my audio and video. The audio drivers are installed and working properly (according to my system) but even on the speaker icon where you adjust the volume there is no sound not even the little beep when you change the volume. I went to my adminastrative tools and checked and the following is what i guess i should have:
Open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Startup Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
I have all of the item but the top one Audio Service???? Help!!!!! Please!Hi @L1215 ,
Welcome to the HP Forums!
It is a grand place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio. Drivers are showing as installed and working properly but you have not audio.
When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System. With this being said HP does not provide the drivers as it is an untested OS on your system. OEM's may and sometimes do alter drivers to perform correctly with your system.
Downloading or Updating Software and Drivers for HP Computers
Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
The best of luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Audio and video out of sync on converted AVI file
I am trying to convert a DVD to an AVI for playback on a device. When I import the DVD and publish it as an .AVI the output audio and video are out of sync. After about an hour of playback the audio lags the video by a full second. How can I correct this problem?
Walter0325
If you have Premiere Elements 12 on Windows 8 and you want to rip VOBs from the DVD-VIDEO to export subsequently to DV AVI, here are the details....
1. Do you have DVD-VIDEO standard or widescreen? Set the Premiere Elements 12 project preset manually.
File Menu/New/Project. Set the project preset to NTSC or PAL DV Standard or NTSC or PAL DV Widescreen depending on what you have.
Before you exit the new project dialog, make sure that you have a check mark next to Force Selected Project Setting on this Project.
2. In the Premiere Elements workspace, use Add Media/DVD camera or computer drive/Video Importer to get the VOBs (only the ones in the series VTS_01_1.VOB. Set to a folder in the Save In: location. Check mark next to Insert in Timeline. Hit Get Media.
3. If you have an orange line OVER the Timeline content, press the Enter key to get the best possible preview of what you have on that Timeline.
If after all that, the audio is out of sync, then use the Command Prompt method to get the individual VOBs into a single file with all the VOBs seamlessly merged. This worked nicely for a recent user here. See details in my blog post how to for the Command Prompt way.
http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
Please do not hesitate to ask if you need clarification on anything that I have written.
Depending on your results, more information may be requested about the specific properties of what you have on that DVD disc.
Thank you.
ATR -
In elements 10 audio and video tracks loaded but appear to be blank
running windows 7 with elements premiere 10... i have my audio and video loaded in the session but the tracks, 2 video with audio and one audio only track, appear to have no info. they play, but i cant see the wave file image. i need to see the file and be able to zoom in so i can line it up for syncing. i had at least the audio showing up at first, but somehow that seemed to disappear now? how do i fix this?
sadworld4804
The wave representation that you seek is in the pek file of the cfa and pek set for the audio. Did you let your audio go to completion for audio conforming before starting any work on the project?
But, I am suspecting something else which is easy to remedy and hope this is it.
1. Look to the left where it says track name, Audio 1, to see a speaker icon. You can toggle that to get 2 different "Audio Track Display Styles"
and
Please let us know if that was the issue, that is, the toggle choice for the "Audio Track Display Style".
Thanks.
ATR -
Can't drag audio and video together?
I have numerous assets in this dvd project. I'm setting up a button to play 10 commercials in a row, a "play all" button.
I'm editing the 10 commercials in what looks like a mini-video editor, with the video track and audio tracks shown.
PROBLEM:
When I grab the video to change the order of my "play all", the audio doesn't move with it. For instance, I'm shifting commercial #3 to become commercial #1. In order for Audio from Commercial #3 to become audio for commercial #1, I have to shift audio #2-10 over to the right to create space for Audio Commercial #3 to insert there. VERY FRUSTRATING and painstaking. And if you accidentally clip a bit off the end or front of an audio portion (easy to do in these tiny little tracks), the sync' is off for the rest of the spots!
I called Apple "tech support", and the rep' told me you can't drag audio and video together, and made up some excuse about 'this should already be done in Final Cut'. What? I'm just bringing in QuickTime files as assets. Why can't I lock audio and video together?
Incidentally, Apple's Tech Support is useless you spend $199, or "$799 for a year". This cost was NOT made clear in the original purchase of the product. I'd prefer spending $1000 for a "PROFESSIONAL APPLICATION" and have good tech support included!
Arrrrgh!
G4 dual 1.25 gig - 1 gig ram Mac OS X (10.3.8) DVD Studio "Pro" 4Once in the track, A and V don't get moved together.
I usually just rebuild the track order from scratch anyway because you can easily lose sync easilly when you are shuffling clip order. -
Adobe Presenter - audio and video
Could someone please tell me the difference between adding
audio and video to a PP presentation via PowerPoint vs. importing
and adding audio and video using the Presenter tab?
Also, I'm looking for a list of things that won't work when
publishing. For example, I noticed that animations, slide
transitions and QuickTime movies won't work after publishing.
Thanks SO much.
LeonaCheck out the documentation on Presenter -- there are some
very specific ways you need to add audio (use "Record Audio" or
"Edit Audio" in the Presenter menu) and video (use "Insert video"
in the Presenter menu).
Powerpoint has facilities to do these things as well, but
Presenter won't be able to publish them, from what we've
determined.
For animations, again, read the documentation carefully --
all your animations have to be set to "On Click" or "With Previous"
-- i.e., they can't be timed animations. Again, Presenter won't be
able to translate these timed animations -- you must "click" them
into view (you do this as you're recording audio with "Next
Animation", or you can do it after recording audio using
"Synchronize Audio"). -
Grouping Audio and Video tracks?
iMovie HD:
When I insert new clips or edit existing ones, my imported audio tracks lose sync with the clips that come after the place of edit. I am continuously manually re-aligning the audio which is very time consuming.
Is there a way to group or link Audio and video so the that imported audio will stay in sync with my clips?
I understand that it may not be possible for the clip I am working on, but what about the clips after the clip I'm editing?
ChristoFound the answer: "Lock audio clip at playhead"
-
Convert to MPEG2 Combined Audio and Video
I am editing a commercial that needs to end up in MPEG2 with combined audio and video. What is the process by which I do this. Obviously compressor splits the audio and video, but I need it combined.
Been there, done that.
I know the layout of Compressor 2 was different - can't remember if these presets were added for 3. Have you looked for Program Stream presets under Compressor 2?
Here's a thread I found on the Cow - says that after you use Compressor 2.3 to create your MPEG and AUDIO files, use MPEG Streamclip to mux them.
http://forums.creativecow.net/thread/20/857579#857579
Hope that helps, I gotta get to bed. Good luck,
Patrick -
Streaming Audio and Video to N900
Hi Guys,
Not sure if anyone else has tried this or not, but I was playing around with Windows Media Player on the PC and setup up the Media Sharing which alows you to share audio and video with other devices. Surprising enough I got it working with the N900 first time.
Setup up some items in the WMP library, turned on sharing. Connected the N900 to my wireless router, loaded up the File Manager and up poped the Shared Media icon. Clicking on that showed my PC and then all the folder structure, opened the video folder and just tried my luck clicking on one of the videos.
It was a divx file and the N900 media player buffered for a few seconds and played it back perfectly. I didn't even have to download an extra codec or anything, it just streamed the video perfectly.
Anyone else had a go?
Paul.I have some issues with this feature. I can play all the media, however, I can only hear sound for a few secondsbut no images; then freezes.
Format: xvid (.avi)
OS: Windows Vista home premium X64 (WMP 11)
Does anyone has the same problem or a fix?
Maybe you are looking for
-
How do I make my accordion spry not "jump" or "hiccup" in IE??
Ok, sorry you guys, I'm a newbie. It seems that no matter what I do, I can't get the accordion to co-operate with Internet Explorer. It has always jumped when tabs are clicked and then settles down. It's rather irritating and I would like to fix it.
-
After download Itunes 11.0.1 can not open store but Apps update is good.
I downloaded new Itunes 11.0.1. Music, Films, apps are all on screen. I can also update my Apps from the appstore. But when I want to go tot the Apple Store for aan new app or new music it says: ITunes doesn't work, waiting for a sollution. When I do
-
Error during PGR in return sales order
HI all, I m encountering an error as shown in pic during Post goods receipt of returns delivery by vl02n. message details Message Text Error in creating post goods issue Technical Data Message type__________ E (Error) Message class_________ M7 (Inven
-
Tomcat gives 404 with Netscape, but not IE
Why would I get a 404 for an application with netscape but not with ie? I am using Tomcat 5.5. Is there something special that I need to do for each browser? Thanks in advance Burt
-
All the text is unreadable, after my latest FF update,
The text is in rectangle boxes with unreadable artifacts. My ISP yahoo has the same issue as are all the pull down menus, except Headlines are readable. IE is fine. How can I correct this issue. Running XP sp3. Thanks, Joel