- insert boot disk...i dont have one
I have a black screen saying no bootable device -insert boot disk --I dont have one
This usually indicates a tried BootCamp Windows installation that has gone wrong.
Boot your Mac while holding down the Alt/Option-key until the Boot Selection screen is shown.
Choose your OSX to boot from.
Once in OSX go to System Preferences - Startup Volume and set your OSX to be the default.
Stefan
Similar Messages
-
My Mac book pro immediately displays black screen when I start up and says no bootable device insert boot disk. My question I don't have boot disk nor recovery disk to restore the system. Urgently needs your support and help. Thanks in advance. Michael l. Lluch
Hello
any chance you have try a bootcamp / win install into your Mac ??
if so
try this to boot into mac os
restart your mac , just after start up sound hold on "ALT" key to sart on drive manager
if that work select mac os volume using arrows key and validate by enter
HTH
Pierre -
What i have done wrong: I got the information "no bootable device insert boot disk and press any key
I use yesterday bootcamp to instal windows 7 at my mac. After i had start bootcamp, i instaled windows, particion my hard driver, and restart my computer. After i had restarted my computer, i got a black screan with the information: no bootable device insert boot disk and press any key.
To press any key was not possible, to get out my cd of the drive is not possible. Can you tell me what happen?
ThanksNo I don´t use Fusion Drive. And yes i have read guide to use bootcamp.
I use only the bootcamp to create the particion.
Steps:
1. Start Bootcamp
2. Create a particion and updates the drivers for windows at mac
3. divide the hard drive in 150 gb for mac and 100 for windows
4. particition is created
5. Put the Windows 7 OEM in the driver
5. restart the mac
6. after restart the mac i got the information:
no bootable device insert boot disk and press any key
to press any key was not possible. Only black screan
The support told me it is no possible to use Windows 7 OEM at a mac, but i have seen video, where people use windows 7 OEM and the guy in the shops say this is possible.
What was is wrong?
Is OEM possible or not? -
ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error
Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive? -
Problems with Bootcamp Assistant: no bootable device -- insert boot disk and press any key
Hello Guys,
I got a problem setting up Windows 7 on my recently bought 13" MacBook Pro (2,3Ghz Core i5).
I used the bootcamp assistent to create a partition of 50GB on my Mac, everything is fine until now. I insert the Windows 7 disk and follow the instructions. But when I restart in spite of starting the installation of Windows 7, a black screen appears with a note saying "no bootable device -- insert boot disk and press any key". To exit this screen I then have to restart my Computer again, holding down the alt-key. In the following window I can just chose my Mac-Harddrive to boot from, the partition is not shown.
I used the software actualization tool to update to version 10.6.7 which is the most recent one i think.
The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
So as I said, I downloaded the Version of Windows 7 Professional with Service Pack 1 (x64) on my computer and then burned on a DVD. I want to add, that the file I downloaded turned out to be an iso file. At first, I just burned this file on a DVD but since it turned out that i got the above mentioned message, I burned a second DVD with the actual files of the iso (with foldernames like autorun.inf, boot, bootmgr, bootmgr.efi, efi, setup.exe, sources support, and upgrade)
I dont know if these details are of any relevance, but i guess it may be useful since I believe that the burning thing could cause the problems.
I have already browsed the Forum for quite some time now, but I didnt find a case with the exact same problem that I have, so I decided to rather ask you for help now instead of killing my brain like I did before (and I dont really have a clue neither of Macbooks nor of Windows-Computers, its always try and error for me)
I hope somebody can come up with some helpful ideas or a solution.
If you need further details on my system or anything, please feel free to ask
Thank you very much,
DavidThe Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
Apple Disk Utility won't do a proper job and won't work (and it varies, some can start the install but fails later) Has to be burned at 2X Reduced Burn Speed
Also check the support articles for bootcamp
Apple Boot Camp Support -
Help with "No bootable Device -- Insert boot disk and press any key" problem
Alright, I am on an Early 2011 17inch macbook pro. I have removed the superdrive to install a secondary disk drive for mass storage, then replaced the original one with an SSD blah blah blah. I do everything from the books, run bootcamp, make my USB windows 7 bootable in Bootcamp, go through everything and allocate 65gb towards windows. I have tried 4 different USB sticks and 3 different ISOs. Every time I try it, I get the same "No bootable device -- insert boot disk and press any key". I then have to hold down the power button, then restart, hold down option/alt key, and boot regularly into mac. I also read that holding option/alt whilst starting the macbook pro will show the windows USB stick, well it never appears. I dont know what I need to do, what I am doing wrong, but nothing is working. I guess the last thing I have to try is buying a superdrive and burning ISO to disc then try that. But I dont want to go out and spend more money. Other people have gotten it to work just fine from USB, I dont know what I must do or what I am doing wrong...
Open to suggestions and in desperate need of help. Anything is appreciated.
Thanks!Don't bump
get a new usb2 only flash drive and try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0
How to install Bootcamp on a 2009 Macbook Pro that does not have a disc drive -
HP Pavilion g6-2330dx. "No Boot Device. Insert boot disk and press any key" Memory test failed
Hi. So I am trying to help a friend with her laptop. It's a HP Pavilion g6-2330dx.
Product #: D1C01UA#ABA
Serial #: [Personal Information Removed]
Windows 8
ADATA 4GB RAM
Toshiba 640GB HDD from the looks of it.
The laptop is unable to boot into Windows, so I suspect the hard drive. But I ran the hard drive test and it passed all the tests. The SMART test and both the short and long test. I ran the tests multiple times and it passed each time. I tried reseating the hard drive and still no go. I also removed the HDD and connected it to my desktop PC to see if it detects and it did. Ran the Windows 7 own HDD test and it passed.
Currently, there doesnt seem to be any operating system at all on the HDD. When I check, there is a C: drive of ~90GB partition that is ~90GB free, but inside there are Windows files/folders. There is also a D: drive Recovery partition that says ~26GB with only ~2GB free, but when I go inside there's only ~350MB worth of data.
So then I ran the memory test (in BIOS) and it failed immediately. I reseated the RAM module. I tried the other slot. It still failed. So is it safe to say the memory is the cause of this problem?
Pressing the F11 key that is supposed to take me to the System Recovery only leads me back to the black screen with "No Boot Device. Insert boot disk and press any key"
I even tried to install Windows 7 to see if it'll work. I was able to get the laptop to boot/read off the Windows 7. But when I click to install, it asks for a boot device driver or something like that.
My friend doesn't have the recovery disk either. I guess she lost it.
Anyway, is it as simple as replacing the memory or could it actually be the HDD (even though it passes)?
EDIT: This is what the System Log in BIOS says
0021 Time: 10/13/2014
03F0 Time: 10/13/2014
03F0 Time: 10/13/2014
The date was the first time I ran the tests. I havent received those numbers (error codes?) since.
EDIT: Just for kicks, I ran Memtest 2.11 just now (forgot I had the disc) and it immediately went red with thousands of errors, hah.Hi bghs,
Welcome to the HP Forums!
It is a fantastic place to find answers and information.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you were unable to boot into Windows, and you suspected the hard drive and tested it, but it passed both short and long test. With that being said and the fact that it also passed leads me to believe the hard drive is fine.
You tested the memory and it failed. You tried reseating and swapping slots but they still failed the test.
I would test each card individual with the memtest to determine if it is just one or both cards that have an issue.
When you installed it in another computer, you did see the recovery partition. Once the memory issue is resolved, if you are still unable to boot into Windows, I suggest you do a recovery with the minimized image. Here is a link to Performing an HP System Recovery (Windows 8) to assist you with that process.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
No Bootable device insert boot disk on iMac Wireless
Hi,
We just recently bought an iMac with Intel just a month ago. Earlier today my computer completely froze so I restarted it. When I turned it on. I received the "No Bootable device--insert boot disk and press any key". Well with the new computers, we did not receive a disk and there is no disk drive in the machine. I have an external disk drive and I unfortunately do not have an external hard drive either. I have most of the files saved on a separate computer.
I looked online and saw that when you restart the computer you can hold the Option key and it will bring up all the systems. It does work and it gives me two options. One is the windows and the other one is a hard drive but its not the OSX hard drive. I've tried both and they both do not work and send me back to the message "No Bootable device--insert boot disk and press any key". We just bought it less than a month ago and I also have a 3 year support and coverage on it that covers problems if need be but I would like to try and fix it myself.
If anyone has any other ideas or tips please let me know.OK. That's not the best news. I can take you through some Terminal commands to attempt to mount the volume if that's possible. Or, you can just erase the volume and reinstall OS X. I suppose your choice here depends on whether you have backups of your files.
Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
No bootable device -- insert boot disk and press any disk
Pleeeeessssssseeeeeee help. I was trying to setup bootcamp but when it came to instaling windows it came up with a black screen and then after 5 or so minutes it powered down. Then when I turned it on from the power button at the back of imac 21.5 inch it took longer than usaul on the white startup screen displaying no apple symbol. Then the screen went black and displayed the words "No bootable device -- insert boot disk and press any key" I have a wireless key board and doesn't conect to the mac until after startup so I cannot hold down the option key (ALT). I have ordered a wired keyboard but will take quite long to get here. Is there a way to fix it without a keyboard or mouse bearing inmind it is an all in one.
Thanks
george292See this discussion for a possible solution in case Allan's suggestion is not the problem. Also look to the right side of the page for other possible discussions with solutions.
-
"No bootable device --- insert boot disk and press any key" after setting up Bootcamp
Hi guys,
I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1709658208 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1710067848 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1711337384 88
1711337472 242186240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
And the output of sudo fdisk /dev/disk1:
Disk: /dev/disk1
geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 25 127 14 [ 1 - 409639] <Unknown ID>
2: AF 25 127 15 - 1023 254 63 [ 409640 - 1709658208] HFS+
*3: 07 1023 254 63 - 1023 254 63 [1711337472 - 242186240] HPFS/QNX/AUX
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Here is also the list of my disks:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 119.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 875.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 124.0 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS FusionDrive *975.5 GB disk2
Logical Volume on disk0s2, disk1s2
FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
Unencrypted Fusion Drive
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GRMCPRXFRER_DE_DVD *3.2 GB disk3
I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
You also wrote
When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
1. The two disks are not in a CoreStorage set up initially.
2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
=========================================================
Name: Fusion
Status: Online
Size: 1190201270272 B (1.2 TB)
Free Space: 0 B (0 B)
|
+-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 255716540416 B (255.7 GB)
|
+-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 934484729856 B (934.5 GB)
|
+-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
Disk: disk2
Status: Online
Size (Total): 1185508581376 B (1.2 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion HD
Volume Name: Fusion HD
Content Hint: Apple_HFS
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 255.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 934.5 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 64.9 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion HD *1.2 TB disk2 -
Boot Camp not installing Windows 7 - "No bootable device, insert boot disk and press any key."
I need some help with something. A while back, I put a brand new hard drive in my MacBook, a 500 GB model to replace the 120 GB one. I cloned everything successfully to the new drive via Carbon Copy Cloner, but now I want to make a Boot Camp partition on the drive. The SuperDrive in it is defective, so I use an external FireWire drive. So far the Boot Camp Assistant in 10.7 Lion works fine in creating the partition, but when it gets to the part where it tries to boot into the Windows installation disk (32-bit Windows 7 Home Premium, or could the 64-bit work fine as well?), it shows a black scree nwith "No bootable device, insert boot disk and press any key." I try pressing keys, but nothing happens.
I also tried using rEFIt, but that didn't work out either.
Here are the specifications of my machine...
MacBook (Early 2009 model)
2.0 GHz Intel Core 2 Duo processor
4 GB of RAM
500 GB SATA hard drive
Dual-layer SuperDrive (defective, may replace it once I have the cash)
NVIDIA GeForce 9400M graphics chip
Mac OS X 10.7.2 Lion
Can anyone help me out with this? Is there some sort of workaround?Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive? -
"Insert Boot Disk and press any key"
Hey guys, I tried to use bootcamp to install windows, and it looks like i messed up big time.
Using a late 2013 iMac with a USB disk drive, Windows 7 Home 64 bit on DVD, and two external HDs.
I consulted a bootcamp guide. Reformatted the externals to what it said.
Kept trying to let bootcamp get the windows updates, but it would always get stuck. So I downloaded the 5.0 updates it said it required and put it in one of the external HDs.
It finally let me start installing windows. It got to the point where the screen was black and it said, "Starting Windows". It was stuck on that for hours. Now it is stuck on a black screen saying "No bootable device- insert boot disk and press any key".
I have restarted many times, holding down command, option and control on different times, nothing seems to work.
Rather nervous, please help.I'm having the same problem. If I take out the USB then hit option key it will at least boot normally.
However, I am completely unsucessful in creating a Windows partition.
I was as the "Genius Bar" for over 3 hours yesterday and none of the "Geniuses" had any idea about how to create a Windows partion in the first place.
Is this seriously so complicated?
I see the other forums where they are manipulating code? I doubt that any of the "Geniuses" have been trained to do this, otherwise they would have suggested it yesterday.
Why is creating a Windows partition in Mavericks so complicated? Anyone?? -
'No bootable device found - insert boot disk and press any key'
Dear all,
I just tried to install a version of Windows 7 on my Mac yesterday and used bootcamp for this purpose. Unfortunately the process could not be completed since bootcamp did not partition the hard drive as NTFS. I had to terminate the installation process and whenever I start up my Mac Mini now see a black screen telling me 'No bootable device found - insert boot disk and press any key'. I have tried to push the Option/Alt key to select the boot device but this does not work. I created a USB with a version of OSX to start from externally which also did not work and I used an older hard drive with a fully OSX system and tried to boot from that which also did not work. I am out of ideas and hope that one of you can help me.
Best regards
BernhardOS X cannot as standard write to NTFS partitions so it is likely that initially the Boot Camp utility created a FAT32 partition. This is not however a problem, when you run the Windows 7 installer either you can manually and specifically reformat that partition to NTFS or it may even do this automatically because it knows that Windows 7 can only be installed in to a NTFS partition.
Obviously if you are using the Windows 7 installer to manually reformat a partition make sure you select the right one!
It sounds like the Boot Camp utility got as far as setting the new 'Windows' partition to be the choice to boot from but of course it is currently empty. However if you are using a Windows CD/DVD disc to install from you should still be able to insert it, turn on the Mac, and hold down the letter 'C' to boot from it. If you are using a USB memory stick to install from then plug it in, hold down the Option/Alt key and turn on the Mac. Hopefully it will then list the USB drive as one of the boot choices or at least list the normal Mac boot disk.
With a Bluetooth keyboard the above keys for use during boot up may not work as mentioned by mjl2013. -
Recovery fail - "No bootable device -- insert boot disk and press any key"
Hello,
I have a problem with Recovery. I don't have recovery dvd/cd so I decided to use recovery partition. After system reboot I press F11 and click on recovery system. After 100% of progress, recovery tells me something like 'now your system will reboot press continue'. And now. After system reboot I see:
No bootable device -- insert boot disk and press any key
I have totally no idea what to do. I read few posts on this forum but I have no Windows 7 CD/DVD and I have no one who can borrow me to install it. I really need my computer back in few hours to work.
Looking for help from You.
My computer: HP Pavilion dv7-6b40ew, Windows 7 Home PremiumHi,
Assuming this is just a problem with the recovery media, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
White screen and message reading "No bootable device--insert boot disk and press any key"
My iMac was recently upgraded to the new Lion software. I dont know if that has anything to do with it but, the computer was working fine. I was working in iMovie, had Safari open. My cousins and I opened Photo Booth and started taking pictures. When we clicked on effects and selected an effect everything froze. I turned off the computer and when it started up, the screen was white. I unpluged it and restarted it, same thing. I unplugged it and around 3 hours later I turned it back on...same thing! Well this time after the white screen appears for I dont know...10 15 seconds..it goes black and a message saying "No bootable device -- insert boot disk and press any key" appears. I have no idea what to do. I have stuff that needs to get done that is saved on this computer. PLEEAASSEE HEELLPP!!!!
Start up you computer holding down the option and select Macintosh HD (or whatever name you gave your OS drive). If successful, take a trip to System Preferences->Startup Disk and make sure the proper HD is selected. Hope this helps.
Maybe you are looking for
-
Installing Adobe Reader error code 1328
Installed what I thought to be Adobe Reader but it was not. It was a paid site displaying Adobe Reader. Now when down loading and attempting to install the correct Adobe Reader I receive an error code 1328. Error applying patch to file C:\config.Ms
-
Moving an older Macbook Pro HD to a newer MacBook Pro computer
Hi, I have two MacBook Pros; one model is a 2007 version, and the other model is the slightly updated 2008 version (they are both Intel Core 2 Duos but the newer one has some updated specs). I would like to take the hard drive in the older computer a
-
Though I am signed in to Creative Cloud (even within PS) when I open the Libraries window, it tells me I am signed out and must sign in to use. Why doesn't it see that I am signed in and how can that be corrected?
-
RDP to Windows Teminal Services 2012
Hi A third party has set up our environment and we could do with a bit of ABC (dummies guide) to overcome some frustrating challenges. A. We have a network connection at a remote site. Any PC (Windows 7) connecting to it and then trying to RDP int
-
Problem storing a secure key on the filesystem
Hello. I have made a key, and stored this in the file system. But it is not secure. I have example code of doing this using password with salt and iterations. But the problem is that I get Illegial key size. Can someone please paste code on how you c