Insert Flash not working in Presenter 7.0

Hi
I've been using Presenter for a while without any problems. I've recently had to install the Tech Comms Suite (2.0) onto a new laptop though and now I cant insert flash into my slides. All that happens is that the systems moves focus to any of my other windows.
Anyone out there help?
I'm using Office 2003, XP and full Tech Comms Suite v2
Nick.

I think I found a fix.
http://www.adobe.com/support/downloads/product.jsp?product=153&platform=Windows
Even though the Adobe updater said I had the most up-to-date version of the software it was lieing. I had to go and apply all patches from 7.0.1 onwards. This seems to now allow me to insert flash again.
Thanks for the posts and I hope Adobe sort this app out, not being compatible with Captivate 5 or AS3 is not good.
Regards,
Nick.

Similar Messages

Iphone 4 camera flash not working.

Iphone 4 camera flash not working when taking pictures but works with the flashlight app. I have ios 7. Tried factory reset. My wife has the same problem with her iphone 4 since the first month she has had it. Any suggestions?

and what have you done to try and fix the situation? Have you taken the steps recommended in the User Guide?

Flash not working in Safari 5

Flash has been buggy for me in Safari 5, ever since I updated the Flash player last week to "10.1 r53". Either Flash files don't play at all, or just the audio plays without video.
Per the instructions on these boards, I have:
1. reset Safari
2. uninstalled flash player
3. installed the flash player
4. repaired permissions
5. restarted
The issue is still there. Firefox plays Flash files, YouTube, etc. just fine. Safari does not.
I'm running SL 10.6.4, latest Software Updates.
Any suggestions?
Thanks!

I created a new account. Flash works in the new account. That's cool, but I really don't want to re-locate all my prefs, etc., just for a buggy plugin.
So, I next...
1. grabbed the Safari plist from the new account
2. logged out of the new account
3. logged into the old account (where Flash does not work)
4. moved the old account's com.apple.safari plist file out of the Preferences folder
5. moved the clean Safari plist file (from the new account) into the Preferences folder
6. reset and restarted Safari
7. Flash worked...for about two minutes. I tested on YouTube, Vimeo and Google Analytics. Back to Flash not working in Safari.
I then tried repeating the earlier steps.
1. reset Safari
2. uninstall flash player
3. install flash player
4. repaired permissions
5. restarted
Still doesn't work.
Just one other thing to note: whenever I pull up a web page with Flash, I get a "file not found" error in Safari's activity monitor (link is below)...could this be an error with Adobe's website rather than a Safari-permission thing?
http://fpdownload2.macromedia.com/get/flashplayer/update/current/install/version .xml10.1.53.64~os=Mac&osVer=10.6.4&playerType=pl&cpuWordLength=32&cpuArchitectur e=i386&lang=en

Update working, but insert is not working.

Hi friends,
Im creating a process for the manular tabular form, that im developing.
Since for the update im giving the below query
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
    update gen_req_items
    set item_id = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
       item_uom_id= replace(htmldb_application.g_f04(i),'%'||'null%',null)
      where req_itm_id = htmldb_application.g_f01(i);
end if;
end loop;It is working fine, and i can able to update the rows in my tabular form.
For insert im giving the following query.
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
    update gen_req_items
    set item_id = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
       item_uom_id= replace(htmldb_application.g_f04(i),'%'||'null%',null)
      where req_itm_id = htmldb_application.g_f01(i);
else if
if htmldb_application.g_f01(i) is null
insert into gen_req_items(barcode, item_id, item_uom_id)
values(htmldb_application.g_f02(i),replace(htmldb_application.g_f03(i),'%'||'null%',NULL),replace(htmldb_application.g_f04(i),'%'||'null%',NULL));
end if;
end if;
end loop;But the insert is not working, as i couldnt able to insert the values. I dont know what went wrong.
The below is my region source coding of my tabular form.
select x.req_itm_id,
x.barcode,
x.item_id,
x.item_uom_id
from (
select htmldb_item.text(1,req_itm_id) req_itm_id,
htmldb_item.select_list_from_query(2,barcode,'select distinct barcode, barcode from gen_req_items') barcode,
htmldb_item.text(3,item_id,10) item_id,
htmldb_item.text(4,item_uom_id,10) item_uom_id
from gen_req_items
union all
select htmldb_item.hidden(1,null) req_itm_id,
htmldb_item.select_list_from_query(2,null,'select distinct barcode, barcode from gen_req_items') barcode,
htmldb_item.text(3,null,10) item_id,
htmldb_item.text(4,null,10) item_uom_id
from dual) xIm developing a manular tabular form by referring the below link, FYR
http://www.oracle.com/technetwork/developer-tools/apex/tabular-form-090805.html_
what might be wrong with my insert statement.
As i also created sequence and trigger for my primary key column req_itm_id in tabular form
Brgds,
Mini

Mini wrote:
But the insert is not working, as i couldnt able to insert the values. I dont know what went wrong.
You've posted here often enough to know that this isn't really sufficient detail. Regarding the above statement, how did you reach that particular conclusion? It might sound like a stupid question, but it gives us a bit of insight into how you have attempted to diagnose the problem and can speed up its resolution.
* Does the insert work "standalone" i.e. if you write it as a manual query in, for example, the SQL Window, using bind variables?
* If it does, do you have any special constraints on one or more of the relevant fields (e.g. "not null" on the barcode field)?
* If so, have you ensured that the relevant field(s) (e.g. F02) are actually populated with values and are valid for insertion?
In addition, I'm not sure what the purpose of the nested "If" statement is
if htmldb_application.g_f01(i) is null
end if;Indeed, the else if won't work either... the correct syntax is elsif

Flash not working in photo booth.

The flash in photo booth on my iMac is not working. When I take a pic, the screen flashes but the pic is still dark. Was working fine yesterday. I did install the latest osx today. That's the only changes since then.

In case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick) to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
Martha

Why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

IE uses a different version of Flash than other browsers use. You need to install the Plugin version of Flash for Firefox.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.

Java & Flash not working in safari

Hello Friends,
why java & flash is not working in safari?
I have checked Java preferences, tab called general tab, and the checkboxes, both checked. java version run on the termial & it confirmed java by displaying it's version. running perfect.
The problem is java & flash not working in safari, might be because of , so?
when ever i open sites like web design company for project i wasn' t able to open such sites...
kindly guide me for the same.
Thanks,
John Millard
Edited by: 951029 on Aug 6, 2012 4:01 AMJavatester site<a/>, so?
when ever i open sites like web design company for project i wasn' t able to open such sites...
kindly guide me for the same.
Thanks,
John Millard
Edited by: 951029 on Aug 6, 2012 4:01 AM

Flash is totally unrelated to Java, so what you're saying is that certain plugins are not working under Safari of which one just happens to be Java. You're the second one I see make mention of that, but the fact remains that you'd need to ask Apple what is going on with their browser.

Photo Booth flash not working in Maverick or Yosemite

I have noticed that the photo booth flash in Maverick on my Macbook Pro and in Yosemite on my iMac is not working Screen flash is enabled on both.
So this is happening on two different computers. Does anyone know how to fix this? All my photos are so dark on both of my computers using Maverick and Macbook Pro.
It works fine on system 10.6.8 though.
Has anyone else had this problem too?
Martha

In case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick) to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
Martha

Flash: Tab Order Not Working in Presenter

In my presentation, I am including a swf file in which the user can tab between fields to enter their name, company, etc., The Tab key works to advance the cursor in the stand-alone swf file, but does not work when published through Presenter. Has anyone else had this occur? Is there a work around? Thanks!

pguerett,
Thanks so much! That did the trick. I kept looking at tab order, but I never looked at Hierarchy. I'm not sure how they got so messed up in that regard. (That's not the order in which I placed the fields--in fact, I imported the form.) Thanks again! That was driving me crazy!
Karen

Recorded Animations Not Working In Presenter (8.0.1)

My animation timings are not working when published to Presenter (8.0.1). Narration timing is good, but all the animations simply manifest one after the other, not as I recorded them as I clicked through (and yes each one is set for "click"). I also have the playback option set for "Use PPTX Slide Time"

It may be related to the the first animation set to with previous. There is a known issue with Presenter when dealing with slides that have a mix of on-click and with/after previous animations:
Adobe Presenter audio cannot be synchronized correctly with animations if a slide contains a mix of on-click animations and after/previous animations.
Workaround: For the Adobe Presenter audio to sync correctly, ensure that all animations on a slide are on-click animations.
The most commonly seen issues with Presenter can be found here: http://helpx.adobe.com/presenter/kb/top-issues-presenter-8.html
The best option may be to elminate animation elements untill you can identify the one that is causing the issue. I suppose it could be something like the object that is animated (I've seen non JPEG/GIF images do odd things) is not converting to Flash properly. I don't believe it is the animation, as the fade-in animation has worked for years.

Stop() not working in presentation slide

I have a very simple stop() action in my first and last
frames of a slide that is under the master slide. No other code.
The oddest thing is that the first stop() does not work, though,
the last stop() action does work. I figured this is something to do
with Flash Presentation type documents so I created a normal Flash
document and sure enough the first frame stop() action does work. I
even created a freshly new Flash Presentation document type and
same effect of first frame action not working. Any ideas why this
is happening to Presentation type documents?

your last stop is working though? try putting a couple frames
b4 the first stop.. see if it is skipping over it. ... it shouldn't
do this..but it might because of loading over with
presentation.

Cfform type="flash" not working in safari

Yes, I know that only a developer would be using Safari with
windows, (firefox has been a little buggie lately)...
However, it appears that flash is not working. I get a
picture that looks like a blue lego.
The strange thing is that when I go to the adobe website, the
flash presentation on the main page appears to be working...

I have the same (unresolved) problem as the original poster. This occurred following an install of Lion Dev Preview 2 on top of 10.6.7 on my Macbook Air (3, 2). The Java / Missing Plug-in errors go beyond Safari, though. I've logged a good 4-5 hours of support calls with Apple, but all the many rounds of uninstalling/reinstalling of the plug-ins, the OS, Safari, and so on has not been helpful.
Actually at first Mail would not open at all because Mail 5 had been installed and simply putting 10.6.4 from the SL USB didn't fix that until I deleted all traces of Mail then re-re-installed SL. I am having this problem with iPhoto as well, but I imagine that if I can find an iLife disk then that problem is solvable. This simultaneously also screwed up some iPhone/iPad related features but, again the Java / Flash issues seem MUCH more of a mystery and, combined. I think I've tried every combination of preferences in Safari, as well as uninstalling and reinstalling Java/Flash at least 50 times in slightly different ways...
Thanks for any potential insight or speculation!!
Various details follow below...
Hardware Overview:
Model Name: MacBook Air
Model Identifier: MacBookAir3,2
Processor Name: Intel Core 2 Duo
Processor Speed: 1.86 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBA31.0061.B01
SMC Version (system): 1.66f54
Serial Number (system): C0***1
Hardware UUID: 7F8348B0-F1F5-5803-B2CE-91638E107C3D
The Java messages take the form of "Cannot launch Java Preferences [etc] No compatible version of Java 1.5+ is available"
<Edited by Host>

HDS live streaming to Flash not working

Adobe Flash Media Server 4.5.5 r4013
Windows 2008
Sources:
http://help.adobe.com/en_US/flashmediaserver/devguide/WSd391de4d9c7bd609-52e437a812a3725df a0-8000.html
http://www.adobe.com/devnet/adobe-media-server/articles/live-multi-bitrate-video-http-flas h-ios.html
Live streaming a single or multi-bitrate video over HTTP to Flash does not work. I have followed the instructions on the 2 sources listed above repeatedly, but I can’t get live streaming over HTTP to Flash to work. Live streaming to iOS over HTTP works with no problems (single and multi-bitrate streams).
I have tried the troubleshooting steps from the following:
http://help.adobe.com/en_US/flashmediaserver/devguide/WS0432746db30523c21e63e3d12efac195bd -8000.html
Troubleshoot live streaming (HTTP)
1. Services window (Windows): Flash Media Server (FMS), Flash Media Administration Server, and FMSHttpd services are running. ✓
2. Verified that the request URL is correct. ✓
3. Configured ports:
a. Configure Apache to use port 80. Open rootinstall/Apache2.2/conf/httpd.conf in a text editor. Change the line Listen 8134 to Listen 80.
b. Configure Flash Media Server not to use port 80. Open rootinstall/conf/fms.ini in a text editor. Remove 80 from the ADAPTOR.HOSTPORT parameter so the parameter looks like the following: ADAPTOR.HOSTPORT = :1935 ✓
4. Placed a crossdomain.xml file to the rootinstall/webroot directory. ✓
5. In Flash Media Live Encoder, select the Encoding Options tab, choose Output from the Panel options menu, and verify the following:
a) The value of FMS URL is rtmp://fms-dns-or-ip/livepkgr. If you’re testing on the same server as Flash Media Server, you can use the value localhost for fms-dns-or-ip. ✓
b) For a single stream, the value of Stream is livestream?adbe-live-event=liveevent. ✓
c) For adaptive bitrate streaming, the value of Stream is livestream%i?adbe-live-event=liveevent. ✓
Flash Media Live Encoder uses this value to create unique stream names. To use another encoder, provide your own unique stream names, for example, livestream1?adbe-live-event=liveevent, livestream2?adbe-live-event=liveevent.
The encoder is showing all 3 streams being published and streaming.
6. Check Administration Console: the livepkgr application and the 3 streams are running. ✓
7. Check the logs for errors. Flash Media Server logs are located in the rootinstall/logs folder. The master.xx.log file and the core.xx.log file show startup failures. Apache logs are located in the rootinstall/Apache2.2/logs folder. X
a) core00.log: these errors did not occur every time that I tried playing the live stream but these are the only relevant errors in the logs.
1. 7968 (w)2611179 Warning from libf4f.dll: [Utils] [livestream2] Discarded all queued Media Messages received before first Video Keyframe Message
2. 7968 (w)2611179 Warning from libf4f.dll: [Utils] [livestream3] Discarded all queued Media Messages received before first Video Keyframe Message
b) edge00.log:
13:33:57 4492 (w)2641213 Connection rejected by server. Reason : [ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (hds-live) is not defined. -
c) Apache-Error:
1. [warn] Checking if stream is disabled but bootstrap path in event file is empty for event:livepkgr/events/_definst_/liveevent stream name:livestream
2. [warn] bootstrap path is in event file is empty for event:livepkgr/events/_definst_/liveevent stream name:livestream1
As I mentioned, everything works on iOS and FMS seems to be creating all of the stream segments and meta files:
a. The 3 streams are being created in: HD:\Program Files\Adobe\Flash Media Server 4.5\applications\livepkgr\streams\_definst_
b. FMS is creating the following files in each stream folder (livestream1, livestream2, livestream 3):
1. livestream1.bootstrap
2. livestream1.control
3. livestream1.meta
4. .f4f segments
5. .f4x segments
The appropriate files are also being created in the HD:\Program Files\Adobe\Flash Media Server 4.5\applications\livepkgr\events\_definst_\liveevent folder, in which I have the following Manifest.xml and Event.xml files:
<manifest xmlns="http://ns.adobe.com/f4m/1.0">
<media streamId="livestream1" bitrate="200" />
<media streamId="livestream2" bitrate="500" />
<media streamId="livestream3" bitrate="1000" />
</manifest>
<Event>
<EventID>liveevent</EventID>
<Recording>
<FragmentDuration>4000</FragmentDuration>
<SegmentDuration>16000</SegmentDuration>
 <DiskManagementDuration>3</DiskManagementDuration>
</Recording>
</Event>
I’ve tried clearing the contents of both streams\_definst_ and events\_definst_\liveevent (keeping the xml files) after restarting the encoder, and creating a different event definst for the streams (liveevent2 for example).
We have an event in 2 weeks that we would like to stream to both Flash and iOS. Any help in solving this problem will be greatly appreciated.

One step closer:
Changed the crossdomain.xml file (more permissive settings).
Changed the encoding on FMLE to vp6. Working somewhat (don't know what I did to make it start streaming through hds).
But at least now I can get the individual streams in the set manifest file to work:
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream1.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream2.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream3.f4m
BUT when I try to play the streams through the set manifest file from http://localhost/liveevent.f4m I'm getting the following error:
"The F4m document contains errors URL missing from Media tag." I'll search the forums to see if anyone else has come across this problem.
I used the f4m config tool to make the file. These are the file's contents:
<manifest xmlns="http://ns.adobe.com/f4m/2.0">
<baseURL>http://localhost/hds-live/livepkgr/_definst_/liveevent/</baseURL>
<media href="livestream1.f4m " bitrate="200"/>
<media href="livestream2.f4m " bitrate="500"/>
<media href="livestream3.f4m " bitrate="1000"/>
</manifest>
Thanks

IPhone 4 battery draining + flash not working

I've had my phone since February 2011, and haven't had any problems up until today. The flash no longer works, I've attempted taking pictures and using flashlight apps, but it's not working whatsoever. And yesterday, the battery started draining like crazy out of nowhere. I fully charged it before unplugging for the night, and by the time I woke up it was completely dead. My phone is usually my alarm, so I was lucky to wake on time. I fully charged it tonight after it drained again, and it's already at 78% just a few hours later and no use. My phone has been opened before, but not fiddled around with at all. Any ideas of what could be causing this, I appreciate!

Just an update - this ended up not fixing my problem. The battery is still draining.
On a side note - I actually left my phone charging overnight and the alarm did not go off this morning because the phone was mysteriously shut off during the night. It hasn't done this in 3 years but did the night of the iOS upgrade yesterday.

Flash not working in Safari (and Chrome and Firefox) - possible solution

Yesterday my Mac crashed (actually when I was away from it) and when it rebooted, Adobe Flash would freeze any web browser it ran in (Safari, Firefox and Chrome - which surprised me as I thought it used a different version of Flash). Great with so many live-blogs happening in the world of news right now.
I tried all the usual suspects:
* Deleted browser caches;
* Uninstalled Flash (Adobe have an uninstaller available) and reinstalled the same version;
* Uninstalled Flash and reinstalled the newest version;
* Made sure I had no duplicate fonts (I did) as I'd experienced problems with this with an iPhoto upgrade;
* Checked recent upgrades (iWeb and Camera updates) to see what they installed (nothing dangerous);
* Fixed permissions (they needed it);
* Tried running Safari under 32-bit (didn't think that would work as I hadn't updated Flash itself);
* Signed in as another user.
None worked.
As a last resort, I downloaded the latest version of the Onyx utility (freeware) and ran the Maintenance scripts, then, under Cleaning, deleted System cache, User cache, Internet stuff (left the cookies), and Font caches (you'll need to Close all the dialog boxes then Restart at the end). Expect a long reboot.
That worked.
It may not work for everyone but may for someone.
Scott

I was having the same issue. I logged into another account, a plain no add-ons account and found that I could view flash content with Safari OK. That mean that there was some preference file in my primary account that was the culprit.
Here's how to cull out the bad apple (pun intended):
Trouble Shooting Preferences
Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the process again and determine if problem is fixed.
If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up.
Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the Don't Replace button as seen here. That will keep the new files created and bring back all of the others.
If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
This cleared it up. I ended up with 16 items that were not put back in the preference folder.
Hope this will work for some of you.
Do you Twango?

Insert Flash not working in Presenter 7.0

Similar Messages

Maybe you are looking for