INSERT from internal table to customize pool table

Hi,
I got an error in inserting into table. According to the runtime error, the record is already existing. I checked the table, there's a record that is the same with mine but we have different uname. And I think UNAME is also a foreign key so it is not a duplicate record...
Points for helpful ideas... Thanks!.

hai,
can u explain more?which table you are using and what is the table structure?are you sure that uname is a key?
which statement you are using for inserting into database?
insert or modify?

Similar Messages

Can not insert or update [TABLE] from internal table in method

I've faced a problem with OO abap. I've tried to insert into [ TABLE ] from internal table, but i've got error msg after i compiled.
"An explicit work area is necessary in the OO context. Use "INSERT wa INTO [TABLE] itab""
After i changed to loop in work area and INSERT INTO [TABLE] VALUES gw_data., everything is fine, can compile and run.
This is error code.
METHOD set_data_to_table.
    REFRESH gi_data.
    CLEAR gi_data.
    IF gi_file[] IS NOT INITIAL.
* Set data for modify table
      LOOP AT gi_file INTO gw_file.
        MOVE-CORRESPONDING gw_file TO gw_data.
        me->conversion_input( EXPORTING im_vendor = gw_data-vendor
                              CHANGING ch_vendor = gw_data-vendor ).
        APPEND gw_data TO gi_data.
      ENDLOOP.
      INSERT [TABLE] FROM TABLE gi_data.
*      LOOP AT gi_data INTO gw_data.
*        INSERT INTO [TABLE] VALUES gw_data.
*        IF sy-subrc = 0.
*          COMMIT WORK.
*        ELSE.
*          ROLLBACK WORK.
*        ENDIF.
*      ENDLOOP.
    ELSE.
      MESSAGE 'No data found' TYPE 'I'.
    ENDIF.
ENDMETHOD.                    "set_data_to_table

Hi Matthew,
I think there is no difference in database insert between OO and non-OO.
The correct syntax according to ECC600 online documentation is
[Inserting Several Lines|http://help.sap.com/saphelp_erp2005vp/helpdata/en/fc/eb3a6d358411d1829f0000e829fbfe/content.htm]
To insert several lines into a database table, use the following:
INSERT target FROM TABLE itab \[ACCEPTING DUPLICATE KEYS].
This writes all lines of the internal table itabto the database table in one single operation. If one or more lines cannot be inserted because the database already contains a line with the same primary key, a runtime error occurs. You can prevent the runtime error occurring by using the addition ACCEPTING DUPLICATE KEYS.
Whenever you want to insert more than one line into a database table, it is more efficient to work with an internal table than to insert the lines one by one.
I think the syntax
INSERT my_dbtable FROM TABLE gi_data.
should work, your suggestion may lead to syntax error.
Regards,
Clemens

Question in ABAP syntax, read & insert data from internal table, while loop

Hi, SDN Fellow.
I am from Java background and learnt ABAP, I don't usually write much ABAP code.
I am trying to implement the following logic in a RFC now.
I have one z-custom database table, the structure as the following:
It has two columns, with these sample data.
Says datable table is ZEMPMGRTAB.
EmployeeID,ManagerID
user10,user1
user9,user1
user8,user1
user7,user2
user6,user2
user5,user2
user4,user2
user2,user1
The logic is this:
I have a input parameter, userid. I am using this parameter to have a select statement to query the record into export table,EXPTAB 'LIKE' table ZEMPMGRTAB.
SELECT * FROM ZEMPMGRTAB
into table EXPTAB
   WHERE EMPLOYEEID = USERID.
Say, my parameter value, USERID ='USER4'.
Referring to the sample data above, I can get the record of this in my EXPTAB,
EmployeeID,ManagerID
user4,user2
Now, I want to iterately use the EXPTABLE-ManagerID
as the USERID input in SELECT statement, until it has no return result. Then, insert the new records in
EXPTAB.
In above new loop case, we will get this table content in EXPTAB,
EmployeeID,ManagerID
user4,user2
user2,user1
I kind of think of the pseudocode logic as below:
(These may not be a valid ABAP code, so I need help to convert/correct them)
DATA:
IWA TYEP ZZEMPMGRTAB,
ITAB
HASHED TABLE OF ZZEMPMGRTAB
WITH UNIQUE KEY EMPLOYEEID.
SELECT * FROM ZEMPMGRTAB
into table ITAB
   WHERE EMPLOYEEID = USERID.
*Question 1: I cannot insert a internal table to export table, it is *incompatible type, what is the alternative way fo this?
*Question 2: How can I access thedata of the internal table like this,ITAB-MANAGERID? As if I can, I would do this:
* IWA-EMPLOYEEE = ITAB-EMPLOYEEID. IWA-MANAGERID = IWA-MANAGERID. INSERT IWA INTO TABLE EXPTAB.
* Question 3: Is the 'NE NULL' - 'not equal to NULL' is right syntax?
IF ITAB NE NULL.
INSERT ITAB INTO EXPTAB.
ENDIF
* Question 4: Is my WHILE loop setup right here? And are the syntax right?
WHILE ITAB NE NULL.
SELECT * FROM ZEMPMGRTAB
into table ITAB
   WHERE EMPLOYEEID = ITAB-MANAGERID.
IF ITAB NE NULL.
INSERT ITAB INTO EXPTAB.
ENDIF
REFRESH ITAB.
ENDWHILE.
Assume all the syntax and logic are right, I should get this result:
EmployeeID,ManagerID
user4,user2
user2,user1
If I have a new entry in datable table,ZEMPMGRTAB like this:
user1,user0
My pseudocode logic will get this result:
EmployeeID,ManagerID
user4,user2
user2,user1
user1,user0
I truly appreciate if you can help me to validate the above syntax and pseudocode logic.
Thanks in advance.
KC

Hi,
FUNCTION ZGETSOMEINFO3.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(USERID) TYPE AWTXT
*"     VALUE(FMTYPEID) TYPE AWTXT
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*"      APPROVERT STRUCTURE ZTAB_FMAPPROVER
*"      ACTOWNERT STRUCTURE ZTAB_FMACTOWNER
DATA: T_RESULT TYPE STANDARD TABLE OF ZTAB_FMAPPROVER.
**Question 1: For this line, I got an error says "Program ''USERID" *not found. Is the syntax right, as the USERID is a parameter for the function.
perform add_line(USERID).
ENDFUNCTION.
form add_line using i_user type ZTAB_FMAPPROVER.EMPLOYEEID
                    changing T_RESULT TYPE ZTAB_FMAPPROVER.
data: ls_row type ZTAB_FMAPPROVER.
* Get record for i_user
select single * into ls_row from ZTAB_FMAPPROVER
where EmployeeID = i_user.
if sy-subrc NE 0.
* Do nothing, there is not manager for this employee
else.
* Store result
QUESTION 2: I am still got stuck on this line of code. It still *says that "T_RESULT" is not an internal table "OCCURS n" *specification is missing. I thought the line: "T_RESULT TYPE *ZTAB_FMAPPROVER" means declare internal table, T_RESULT as type of ZTAB_FMAPPROVER". Am I understand it wrongly?
append ls_row to t_result.
* Call recursion
perform add_line using ls_row-ManagerID
                          changing t_result.
endif.
endform.
Thanks,
KC

Inserting records from internal table to database table

Hi all,
i want to insert records from internal table to zDatabase table, can u plz guide me which statement is better in performance to insert the records.
1) insert one by one record from internal table
loop at itab.
insert ztable from wa.
endloop.
2) insert total records at a time
INSERT <dbtabname> CLIENT SPECIFIED FROM TABLE itab.
or let me know if any other statement is there with high performance.
i internal table contains nearly 40000 records.
thanks.

Hi,
Insert the entire table at atime rather than a record so as to increase the performance.
you can use INSERT <dbtabname> CLIENT SPECIFIED FROM TABLE itab.
or
MODIFY ZPRODUCT FROM TABLE GI_AFPO.
Regards,
Raj.

Update databse from internal table statement not using index

Hi Guys,
We are updating a databse table from a file. The file has a couple of fields which have data different from what the database has (non-primary fields :). We upload the file data into an internal table and then update the database table from internal table. At a time, internal table is supposed to have 10,000 records. I did SQL trace and found that the update statement is not making use of the databse index.
Should not the update statement here be using the table index (for primary key)?
Regards,
Munish

... as often there are recommendations in this forum which makes me wonder, how people overestimate their knowledge!!!
Updates and Deletes do of course use indexes, as can be seen in the SQL Trace (use explain).
Inserts don't use indexes, because in many databases inserts are just done somewhere, But also with the INSERT, the primary key is the constraint for the uniqueness condition, duplicate keys are not allowed.
Coming to the original question, what is you actually coding for the update?
What is the table, which fields are in the internal table and what are the indexes?
Siegfried

Passing a value from internal table to a powerpoint slide

Hi,
Does anyone know how to pass a value from internal table to a powerpoint slide? I would also need some codes with regards to the coding to open the powerpoint and insert the value in.
Thanks.
Points will be awarded.
Hope to hear from you soon.
Lawrence

geez!! do feel sorry for you
you can fire FM WS_EXECUTE to open power point but passing a variable at run-time i'm not sure, sorry.

Fill database table from internal table

I made one table ZDISP_CHDOC_CC and want to fill that table from internal table.and i got runtime error. that duplicate entry
and two entry are like 10 200000    likhp 10
                                    10 200000    likp   10
DESCRIBE TABLE IT_CHDOC .
    LOOP AT IT_CHDOC.
    INSERT ZDISP_CHDOC_CC FROM IT_CHDOC.
    endloop.
    IF SY-SUBRC = 0.
      COMMIT WORK.
    ELSE.
and when i used following then only one entry is insreted.
DESCRIBE TABLE IT_CHDOC .
    LOOP AT IT_CHDOC.
    INSERT ZDISP_CHDOC_CC FROM IT_CHDOC.
    IF SY-SUBRC = 0.
      COMMIT WORK.
endloop.
    ELSE.

Hi,
Replace your current code
DESCRIBE TABLE IT_CHDOC .
LOOP AT IT_CHDOC.
INSERT ZDISP_CHDOC_CC FROM IT_CHDOC.
endloop.
IF SY-SUBRC = 0.
COMMIT WORK.
ELSE.
WITH THE ONE GIVEN BELOW
DESCRIBE TABLE IT_CHDOC .
INSERT ZDISP_CHDOC_CC FROM TABLE IT_CHDOC ACCEPTING DUPLICATE KEYS.
IF SY-SUBRC = 0.
COMMIT WORK.
ELSE.
Regards,
Siddarth

Upload data from Internal table to text file with '~' separator

can anyone help me to download data from internal table to flat file with '' separator. GUI_DOWNLOAD is not working in my case ....like for '' separator

Here it is
REPORT zkb_test1.
TYPE-POOLS: truxs.
DATA: i_scarr TYPE TABLE OF scarr,
i_conv_data TYPE truxs_t_text_data.
SELECT * FROM scarr INTO TABLE i_scarr.
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
    i_field_seperator    = '~'
TABLES
    i_tab_sap_data       = i_scarr
CHANGING
    i_tab_converted_data = i_conv_data
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    filename                = 'C:\Test1.txt'
    filetype                = 'ASC'
CHANGING
    data_tab                = i_conv_data
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    not_supported_by_gui    = 22
    error_no_gui            = 23
    OTHERS                  = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards
Kathirvel

Fetch the values from internal table inside an internal table (urgent!!)

data : BEGIN OF PITB2_ZLINFO occurs 0,
         BEGDA LIKE SY-DATUM,
         ENDDA LIKE SY-DATUM,
         PABRJ(4) TYPE N,                       "Payroll Year
         PABRP(2) TYPE N,                       "Pay. Period
         ZL LIKE PC2BF OCCURS 0,
       END OF PITB2_ZLINFO.
I have a internal table like this,
How to Fetch the values from internal table inside an internal table.
Kindly Help me on this..
Regards,
Ram.

Hi,
Try this....
Loop at PITB2_ZLINF0.
Loop at PITB2_ZLINF0-ZL.
endloop.
Endloop.
Thanks...
Preetham S

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

To get recent timestamp records from internal table

hi all,
i have one requirment
i'm storing error messages in one table while creating a sales order basing on timestamp
which is of this format yyyy-mm-dd hh:mm:ss (random Number)
if i want to see the error messages left i'm getting all the error messages displayed
for example i have created a sales order
i got 10 errors displayed
i have rectified 5 errors ... if i again display error messages the 10 errors + the 5 errors is getting displayed
i want to display the 5 error messages only not the previous messages from internal table
basing on timestamp current one has to displayed remaining has to deleted from internal table.

I thought we used Sales Order Incompletion process for this.... but, if you're recreating the errors list every time you save with a create or change transaction then, at save, delete all rows in your error table for this document. Then get your errors and update your db table from your current errors table. From this viewpoint, the timestamp is not relevant.

Create XML file from internal table and vise a versa

Hi Friends,
I have requirement to create an XML string from internal table data and also read XML string data to internal table.
Can anybody tell are there any Function Modules or methods existing for this?
Thanks.
Krishna Yerram.

1. Write XSLT program. T.code XSLT . e.g. XSLT name "ZTRANS".
2. Write ABAP program
Which includes declaration of internal tables
that you need "IT_DATA".
Upload XML data to an internal table "IT_XML "
use below statement to convert XML to internal table.
Call transformation ZTRANS
source XML IT_XML
result IT_DATA.

Gui_download for transferring the data from internal table to excel sheet.

hi all,
i am using gui_download for transferring the data from internal table to excel sheet.
I have a internal table with 3 columns col1,col2,col3 and I am getting the file at the specified path,but my problem is that,in the excel sheet(path specified) all the 3 columns values are printed in one column.Please help me.
Thanks in advance.

Hi Venkata,
plz use FM 'SAP_CONVERT_TO_XLS_FORMAT' :
call function 'SAP_CONVERT_TO_XLS_FORMAT'
    exporting
*   I_FIELD_SEPERATOR          =
*   I_LINE_HEADER              =
      i_filename                 = p_file
*   I_APPL_KEEP                = ' '
    tables
      i_tab_sap_data             = t_mbew
* CHANGING
*   I_TAB_CONVERTED_DATA       =
* EXCEPTIONS
*   CONVERSION_FAILED          = 1
*   OTHERS                     = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Hope this helps,
Erwan

Import from internal table

Dear Experts,
I need a solution for importing from an internal table.
Two variables I_EXP01 and I_EXP02 containing an xml stream have been exported to the database using the following syntax
and depending on the size of I_EXP01 and I_EXP02 two or more entries are created in table LTEX.
EXPORT
         L_SAPRL
         I_EXP01
         I_EXP02
TO    DATABASE LTEX(LT)
                       ID LS_LTEXKEY.
But now i have a few entries of table LTEX in an internal table and they need to be imported from the internal table.
What would be the syntax to import from internal table so that after importing I can de-serialise the data from XML to ABAP.
Thanks & Regards,
Ashwini

Try this and let me know if it works:
IMPORT
L_SAPRL
I_EXP01
I_EXP02
To
L_SAPRL1 (same type as above)
I_EXP011 (same type as above)
I_EXP021 (same type as above)
FROM DATABASE LTEX(LT)
ID LS_LTEXKEY.
if it is not working. try using seperate statements for each internal table and see.
Thanks,
Venkatesh.
Edited by: venkatesh333 on Jul 27, 2011 6:23 AM

Downloading data from internal table to xls file leading zeros are not disp

Hai abap gurus,
when i am downloading data from internal table to excle file. some field values in a column are with leading zeros and some others dont have leading zeros.but in the output it is showing without leading zeros. then how to get with exact values.
Ex:
<b>ECC Code.</b>
045234
88567
098456
but output is giving like this:
45234
88567
98456
how to get the actual values.....
plz help me in this matter.

Dear Kiran,
Those field in the internal table having Leading Zeroes, make those fields' datatype as character.
Then use the function module to download the content of the internal table to the excel file.
Regards,
Abir
Don't forget to Reward Points *

INSERT from internal table to customize pool table

Similar Messages

Maybe you are looking for