Insert images problems

When I insert PNG images in Captivate 5.5, the outlines change color and become red, green, etc.
I use PNG images because it allows me to have forms with the center transparent (like the gray lines in the video). Is it the format that causes problems? If so, what format could I use that would allow me to keep transparent areas?

If you just make the colour you want transparent something like pink or lime green, you can use BMP, PNG, JPG, or GIF and just use the tools inside Captivate itself to make those colours transparent.
Insert the graphic, and use the eyedropper tool to sample the colour you want transparent.  It's really quite easy.

Similar Messages

  • Insert Image problem

    I have a jpg file of a company logo. If I doubleclick the file or open it in Microsoft Paint, it looks something like this:
    XYZ, Inc.
    An ABC Company
    Of course the lettering is stylish, not plain.
    In Crystal Xi, I choose Insert-Picture, select the jpg file, and place it in the header. The image appears but does not include the line "An ABC Company". I can tell that there is space for the line, but this portion of the image either is not there or is not visible.
    What is causing this problem?
    Thanks,
    Art

    I checked the text box to make sure the line was not being cut off or cropped. (I have not attempted any cropping or editing of the image after placement into the Crystal report. The second line of the logo is not visible in Design or Preview mode, and does not appear when printing. Very odd.
    However, I did discover a workaround. I opened the jped in MS Paint and then saved it as a .tif file. I was able to place the .tif file just fine into Crystal Reports.
    Art

  • Problem in insert image function

    Hi there...I'm brand, spanking new to Dreamweaver CS3, and I
    just started working through tutorials to try to learn the
    software. I'm having a little issue with something that is problem
    very easily fixable to the gurus here.
    When I tell Dreamweaver to "insert image" through the Common
    Bar, it takes me straight to the accessibility dialog. When I click
    OK, it then puts a small box with no image on the page. I then have
    to double click the box to tell it what image to place into the
    image holder. This doesn't seem correct to me as I'm duplicating
    steps. It's becoming annoying when I'm working with several images.
    The tutorial I'm using shows another dialog box asking for the
    image BEFORE the accessibility dialog box. It's not working this
    way for me.
    Can you help?
    Thanks!
    Kym

    This is definitely an odd issue. Have you tried installing
    any extensions to DW? If so, uninstall them and see if the function
    works.
    If not try just try inserting an image by clicking the
    drop-down arrow next to the insert image button and then click to
    insert an image and see if it takes you to the right screen.
    If that doesn't work you may need to try re-installing the
    program. I would suggest some other OS specific things you can do
    such as trashing the preferences file from the Mac OSX library, but
    I don't know what OS you are using so it wouldn't help to tell you
    these steps as at this point it might just be more beneficial to do
    a re-install.

  • Problem: insert images by script

    Hello.
    I have problem with insert images from script like this: <& "H:\P1010014.tif">.
    After insert all images are square :(
    But i need its own sizes and proportions.
    P.S.: i can`t write in tag width and height because in all images its different

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web site development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Problem inserting images Dreamweaver CS3

    Hi, I have Dreamweaver CS3 and Dreamweaver MX 2004 loaded on
    the same machine, iMac G5. My OS is 10.4.10 Tiger and all updates
    are current. No particular reason, just never got around to
    uninstalling the latter. Here's the problem in CS3, but not MX
    2004. I can't insert images into my HTML page by any of the
    following methods: insert menu at the top of the screen, or click
    and drag the file. Copy and pasting the code from another page
    won't even work. The only way it works is by typing in the raw code
    into code view. I get a strange warning when I try to copy and
    paste: something like Java script error. I thoroughly checked my
    mark-up and there's no a single speck of Java Script anywhere. I've
    also get other strange warnings while trying to put in images:
    floating bugs.html, margin bugs.html, and others (sorry this is not
    verbatum, but you get the idea). I've tried shutting dowm the
    computer and rebooting, but that didn't help either. When I
    switching over to MX 2004, same files, I was able to insert images
    in all of the various ways mentioned above. So I'm thinking, maybe
    I should uninstall Dreamweaver CS3, and reinstall from disk. So, I
    did the uninstall, and emptied my trash, but haven't reinstalled
    yet. Thought that I should run this by the forum first. thanks for
    any help. Yesterday I got multiple sudden unexpected "quits" while
    using both versions, losing unsaved work. thanks for any
    suggestions, Deborah North

    Troubleshooting JavaScript errors in Dreamweaver
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "dnorth" <[email protected]> wrote in
    message
    news:feinqm$173$[email protected]..
    > Hi, I have Dreamweaver CS3 and Dreamweaver MX 2004
    loaded on the same
    > machine,
    > iMac G5. My OS is 10.4.10 Tiger and all updates are
    current. No particular
    > reason, just never got around to uninstalling the
    latter. Here's the
    > problem in
    > CS3, but not MX 2004. I can't insert images into my HTML
    page by any of
    > the
    > following methods: insert menu at the top of the screen,
    or click and drag
    > the
    > file. Copy and pasting the code from another page won't
    even work. The
    > only way
    > it works is by typing in the raw code into code view. I
    get a strange
    > warning
    > when I try to copy and paste: something like Java script
    error. I
    > thoroughly
    > checked my mark-up and there's no a single speck of Java
    Script anywhere.
    > I've
    > also get other strange warnings while trying to put in
    images: floating
    > bugs.html, margin bugs.html, and others (sorry this is
    not verbatum, but
    > you
    > get the idea). I've tried shutting dowm the computer and
    rebooting, but
    > that
    > didn't help either. When I switching over to MX 2004,
    same files, I was
    > able to
    > insert images in all of the various ways mentioned
    above. So I'm thinking,
    > maybe I should uninstall Dreamweaver CS3, and reinstall
    from disk. So, I
    > did
    > the uninstall, and emptied my trash, but haven't
    reinstalled yet. Thought
    > that
    > I should run this by the forum first. thanks for any
    help. Yesterday I got
    > multiple sudden unexpected "quits" while using both
    versions, losing
    > unsaved
    > work. thanks for any suggestions, Deborah North
    >

  • Problem inserting image

    Hi,
    i'm having problems inserting images in a Premiere project. My first couple of image are ok but after that when i try inserting a new image, it's always the same image! I've tried everything : deleting the images and reimporting them, deleting previews, ... Exporting shows the same images over and over again
    Any ideas why Premiere does this? What can i do?
    Thanks!

    Issues with still images

  • Problem inserting images over video

    Hello,
    I have a had a semester of using FCE4, but we did not learn much on inserting images. I can insert the image to show over the video/audio, but I cannot get the background to be black. It shows the photos on top of the video and the video shows as the background. Please help! I have searched the manual and our class textbook for answers, but cannot find any.

    You can do it in the Viewer or Canvas.
    Switch on Image+Wireframe in the Canvas.
    Place the playhead on the still and select it in the Timeline.
    You should see an X across the Canvas.
    Drag any corner to fill the Canvas.
    Set the Canvas to Fit to Window before starting.
    Al

  • Inserting images in a collapsible panel

    Can anybody help with a problem about inserting an image into
    the tab of a collapsible panel as a visual clue to users that they
    can open/close the panel? I'm trying to ensure that users don't
    just see the tab of the panel as a kind of good looking heading but
    that the images (two - one for open, one for closed) would give a
    visual clue that the tab actually opens when clicked.
    I'd be very grateful for any help, thanks, st44

    By managing the table's default cellpadding and cellspacing.
    Are you
    setting them to zero?
    If that's not happening then we would need to see your code.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "OxfordFishSalon" <[email protected]> wrote
    in message
    news:fulior$9i1$[email protected]..
    > When I insert images in a table and align them right,
    for example, there
    > are
    > still a few pixels between the edge of the table and the
    image on the top
    > and
    > right.
    >
    > How do I make an image go to the absolute edge of a
    table?
    >
    > Thanks,
    > Chris
    >

  • SCN document: 'Insert Image' greyed out at a certain stage/size

    I noticed  a similar issue likeTammy has reported in discussion/thread .Cannot insert or upload an image
    After having inserted text and several images to a draft document, the 'Insert Image' icon became greyed out at a certain stage/size.
    I did some tests following document Solution for Error: Cannot Insert Images on SCN Content, but the the behavior remained the same. Only after having deleted the last inserted image in the document > Save Draft > Edit again the 'Insert Image' icon was not greyed out anymore which is argueing for a size restriction.
    The same html coding as in the document put into a blog does not grey out the ‘Insert Image’ icon. But I found out that after clicking on the ‘Insert Image’ icon > ‘From your Computer’  tab ‘Browse’ is greyed out. Strange and argueing against a size limit is, when I choose ‘Uploaded Images’ I can select images and still  insert them into the blog.
    Does someone have similar experiences / can assist.
    Thank you, Barbara

    We have a recent discussion in SCN support.
    He has same problem. Have a look into the discussion Issue with 'Insert Image' button while creating document in SCN
    I suggest to split you document into two part as part 1 and part 2.

  • Inserted images leave ghost outline in PDF

    I have never had this problem but am in the middle of producing a large document with multiple inserted images. When I output as a PDF, some - but not all - of the images show a very faint gray outline - almost as if I had created a pencil thin frame in gray. I have tried inserting both JPEG and PDF files of the same images but with the result is the same. The images are predominantly charts and graphs with white back grounds so the unintended frame is a problem.
    Thanks for any suggestions of solutions.

    Chris
    I examined the .pdf structure in Illustrator and the hairline is actually the revealed edge of a grey background behind the graph where the trimbox appears.
    The structure is a little complicated. Basically the whole of the .pdf of the table which you created from Numbers has the grey background, which is then masked by the trimbox you created in Preview when you cropped it.
    You need to go back to the original Numbers' tables to see what the grey background is there that could be causing the masked grey object.
    Alternately, don't trim the table in Preview. Just bring the whole untrimmed graph into Pages into an image box, which you then mask to trim out the unwanted elements.
    Peter

  • Inserting images in dreamweaver

    HELP! :)
    when I insert images on my page, large grey box with a grey X
    appears...does anyone know how to fix this?

    Josie is right - sounds like you are not working in a defined
    site within Dreamweaver.
    The cross mark means the image is not linked correctly.
    If you are working in a defined site, then maybe post a link
    to the problem page or post the code to
    the probelm area.
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    CSS Tutorials for Dreamweaver |
    http://www.adobe.com/devnet/dreamweaver/css.html
    Book: Ultimate CSS Reference (aff link) |
    http://www.sitepoint.com/launch/005dfd4/3/133
    "jimmykamal" <[email protected]> wrote in
    message
    news:gpou26$pva$[email protected]..
    > HELP! :)
    > when I insert images on my page, large grey box with a
    grey X appears...does anyone know how to
    > fix this?

  • Inserting Images in Database

    Hi,
    I am using forms6 and database is 8.0.5. I have images stored in a folder say c:\images\. I have a table for item master and the item code is same as the image name in the image folder. Eg : Item code -ABC123 so there is a image jpeg format by the name ABC123. All the records are created in item master.
    Now if the user puts 10 images in this folder i want to read all this images and insert it in item master against this item code. Now i want to know the sql for this
    1>Reading sequentially all the images from this folder
    2>By the image file name read the itemcode from the item master and insert image in that record. I am using Long raw for storing the images.
    Thanks in advance.

    Hi,
    I managed reading the images from the folder and but just stuck up with the problem.
    Test -1
    I declared a variable var_abc long raw.
    read_image_file(v_filename,'ANY',var_abc);
    update item_master set item_pict = var_abc where item_code = var_item;
    Here it gives error at runtime on read_image_file for var_abc
    Test-2
    I created a nondatabase block and create a column txt_image with type as image.
    read_image_file(v_filename,'ANY',:txt_image);
    update item_master set item_pict = :txt_image where item_code = var_item;
    Here it gives error at compilation on item_pict =:txt_image
    Anyone can help me out where i am making mistake ?.

  • Inserting images in OS independant way

    Hi All,
    I have a report which has few bmp files on boilerplates. The development(9iDS-902 R2) goes on in Win2K machines. While inserting images from local disks, the reports builder requires the path of the file to be present. The final deployment of the report is supposed to be done on a linux based installation (10g AS). Obviously the path is not going to help me.
    I'm looking for ways by which I can attach the image without dependancy on the path (something similar to how we attach a library in forms). Please suggest.
    The report is supposed to be launched from a form (using run_report_object) running on the same machine. The report server is running as external server.
    Thanks and regards,
    Kinjal Sonpal

    I am having the same problem, the development is done in windows environment and deployed to unix server. The image path is pulled from the database, but how do I avoid getting a REP-0108 file not found when the procedure brings back the unix path. Is there a way for the package or reports to tell which OS is running and use the relevant path stle \folder\folder\ or c:\folder\

  • Correct workflow when inserting images into text, InDesign CS4

    Hi,
    I am new to InDesign and I have a problem regarding a really basic thing and I would be very grateful for help.
    I am writing an article which is about 10 pages long. It consists mostly of text. I have finished writing and now I want to add some illustrations with descriptions. I've already figured out it's best to insert images into the text frame so they behave as "anchored objects" and they move together with text when I add or delete something on previous pages. Now I would like to place TWO OR MORE images, one next to each other, in a line. This is a bit tricky but I created an object style with Position: Custom in "Anchored object options" and it works more or less fine. This works great but now it would be hard to add descriptions to these images that would still be anchored.
    So I created something different. I made an empty rectangle frame, a small text frame under it and grouped them. Then I placed it in my master text frame and basically did the same thing as for previously described images. Now I place the newly loaded image in the empty rectangular frame and add text in the empty text frame. BUT now I have problems with frame size for different-size images.
    What if I have a REALLY LONG article and want to add LOTS of images with decriptions that would be anchored in the text so I can edit previous pages? I can do this my way, but it's extremely uncomfortable and takes ages. Is there any comfortable, non-destructive workflow for doing such things?
    Sorry for my English.

    Hi,
    I would recommend following steps:
    Place one or more images
    Don't anchor them yet.
    Arange them (the images) relatively to each other, add a text frame and arrange them correct relatively to the images.
    Group images and text
    Copy (or cut) them into the clippboard
    Set the curser into the text where it should flow
    Paste it
    Adjust the anchored object (the group)
    You need to group several objects to anchor them together as one anchor.
    Further recommendation:
    For the images I would specify an object style for fitting, stroke, corner optione.
    For text frames I would specify an object style for text object options, like text offset, and used paragraph style, no boarder, etc.
    For the group I would spcify an object style which leaves above mentioned settings undefined (option field is grea or has a dash). But the anchored position of the whole group and text wrapping should be specified.
    Willi Adelberger

  • How to Insert image file from fileChooser to a tabbedPane?

    Hi,
    Currently, i have encounted a problem halfway through my project. That is how do i insert images into a tabbedPane after selecting a image file from the fileChooser?
    Do anyone has any idea of how to solve the above problem?
    Thanks!!

    I would put the image in a JLabel and put the JLabel in the tabbed pane.

Maybe you are looking for