Insert in master page, the first page and the last page of my article...

I need insert in the master page, the first page and the last page of my article... (Indesign CS3-4)
Is this possible ????
Thanks for read me...

Marcos Suárez wrote:
I need insert in the master page, the first page and the last page of my article... (Indesign CS3-4)
Insert WHAT ?
robin
www.adobescripts.com

Similar Messages

  • .. If the app is – in or out of background - (if in background NOT the first app) and the  device locked – when you get a push message and DO NOT response straight away. Later  unlock, click the app icon (which will have a badge on it) and it fails.

    .. If the app is – in or out of background - (if in background NOT the first app) and the  device locked – when you get a push message and DO NOT response straight away. let it fade off then, Later unlock, click the app icon (which will have a badge on it) and it fails to pop up my internal alert box and my notification message is gone(cannot get access to it in code).. other times it works . Including if you tap the messaeg from app centre. (this is all on a iPod 5.1.1).
    Here is someone else with same problem http://stackoverflow.com/questions/7080266/receive-remote-notification-when-ios- device-is-locked-and-im-not-responding-imm

    Tell Apple
    Apple - iTunes - Feedback

  • I payed by a mistake, a new suscription to Adobe PDF convert, and after I payed my original suscription that was canceled in this moment. So, I payed twice, the first 24€ and the second 19€. I need you get me back my money.  Thanks.

    I payed by a mistake, a news suscription of my Adobe PDF converter, 24€, and after that I payed again for my old suscription that was canceles few days before, 19€.  So, I payed twice for the same suscription.  I ask you, please, get back my money.
    Fernando José Hernández Nodarse

    Thanks, Sara, for your atention.
    Fernando
    2014-12-10 2:58 GMT+01:00 Sara.Forsberg <[email protected]>:
        I payed by a mistake, a new suscription to Adobe PDF convert, and
    after I payed my original suscription that was canceled in this moment. So,
    I payed twice, the first 24€ and the second 19€. I need you get me back my
    money.  Thanks.  created by Sara.Forsberg
    <https://forums.adobe.com/people/Sara.Forsberg> in *Adobe Acrobat.com
    Services* - View the full discussion
    <https://forums.adobe.com/message/7001009#7001009>

  • I turned on my Macbook pro for the first time and the mouse is frozen

    I turned on my Macbook pro for the first time and the mouse is frozen since the first screen. I did the start up, but using the comands on the keyboard. I think the laptop is configured to blind people. I just got at the desktop, but the mouse is frozen.

    If this is a new machine, you have 14 days to return the machine for an exchange or a full refund. Your trackpad should work out of the box and what you're seeing onscreen may very well be settings for the partially sighted.
    Clinton

  • TS1702 I am setting my ipad up for the first time and the onscreen instructions do not appear

    I am setting up an ipad for the first time and the online instructiuons don';t show up in itunes

    No.

  • Can I use the the measured time between the first count and the last count in a fixed time window in order to increase the accuracy of a quadrature velocity measurement?

    I am measuring velocity using a linear encoder. Resolution is 40microns, sample frequency is 1MHz and the real velocity is oscillatory in nature with an amplitude of 200 to 400 mm/s with a freq of about 1Hz. We use a 5ms fixed time window to measure velocity. The quanization error for this is 8mm/s. Can I get rid of the quatization error by somehow measuring the exact time from the first pulse to the last pulse in the measurement window?

    There is probably a way to do it, but it it may be easier to use an X-series board for the job.   They support a new counter capability for count reset on a digital edge without needing to be configured in encoder position mode.  I am not sure exactly how that feature's been implemented however, so maybe it won't make things easier after all.
    The plan based on the hoped-for behavior: 
    1. Configure an X-series counter for pulse generation based on "ticks" of your clock channel.
    2. Set both initial delay and low time to the critical # of ticks.
    3. Configure for count reset on a digital edge (if possible in pulse generation mode)
    4. Configure the count reset value to be the critical # (or possibly 1 less, if possible in pulse generation mode)
    5. If you want the output to remain high indefinitely, configure the counter task to use its own output as a
    pause trigger, and pause while high.
    The way pulse generation works is to preload a # of "low time" ticks into the count register.  Then every source edge will decrement the count.  When the count reaches terminal count (0), the counter's output is toggled (or can be configured to pulse).  The register is then loaded with the # of "high time" ticks and the process continues.
    You would be perpetually interrupting the count-down process as long as you got your triggers in time.  The count would keep getting reset to the # of low counts, keep decrementing toward 0 without reaching it, and so on.  If ever you did reach 0, the output state would toggle high, then the high state would prevent subsequent clock signals from decrementing the count.
    You can conceivably do a similar thing with a 6601, but I'm pretty sure you'd need 2 counters working together to get it working.
    -Kevin P

  • How can I disable the 'First Run' and 'Whats New' pages from showing after updating Firefox for all users that log onto a system.

    I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.

    Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    * http://kb.mozillazine.org/Locking_preferences
    You can use these functions in mozilla.cfg:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    *http://kb.mozillazine.org/browser.startup.homepage_override.mstone

  • I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

    I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

    In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • Attempting to run Elements for the first time and the Adobe Application Manager was stopped.  What to try next?

    What to try if attempt to run Elements for first time and Adobe App Manager was stopped?

    has the program you want to run been successfully installed?
    if not, install it.
    if yes, restart your computer and run the program.

  • If iPad1 has been synced to a MacBook Pro can it be synced to a PC with Windows XP itunes for backup then an iPad2 is synced for the first time and the backup of iPad1 put on iPad2

    I cannot get my airport router to talk to my service provider modem. I know the modem works as I can hook my laptop direct to the modem and it is ok.
    How can I test my Airport router.

    From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
    http://discussions.apple.com/thread.jspa?messageID=8482110
    http://news.cnet.com/8301-13924_3-10026010-64.html
    http://www.intel.com/design/flash/nand/mainstream/index.htm
    http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
    I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
    http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
    That won't solve performance issues, but should work.
    http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
    "My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
    Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
    SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
    http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

  • I recently transferred my music from a PC to a Mac and i just synced my ipad for the first time and the old music has gone on the ipad but the music i just downloaded will not sync yet it plays on iTunes?

    It says that the computer is not authorized but it is and the old computer has been deauthorized. If you need more information just let me know

    NicoleDianneAgnes wrote:
    ...  I haven't yet gotten rid of the old computer, ...
    That is good News...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    Also... Have a look at these 2 Videos...
    http://macmost.com/moving-your-itunes-library.html
    http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

  • How to print on the first side and the back side, like in a book?

    HP PHOTOSMART 6510 B 211 a
    Windows XP
    Product N° CQ 761B
    [serial number removed for privacy]

    Hi AUQUE,
    Here is a link to a document that will show you how to duplex (print on both sides of the paper ).
    Along with the document is a video. Hope this helps.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Can you move a row in a DataGridView to the first row and move the other rows down to make room?

    I'm using a DataGridView (I call it "dg") to display a list of items. I want the user to be able to position the cursor on a row in the middle of the list then click a button to move that row to the top of the list (and move the other rows between
    the first row and the row being moved down one row to accomodate the new first row).
    Robert Homes

    Hello,
    If the DataGridview does not have it's DataSource set we can use the following logic
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    Dim data = (From T In DataGridView1.Rows(DataGridView1.CurrentRow.Index).Cells.Cast(Of DataGridViewCell)() Select T.Value).ToArray
    DataGridView1.Rows.RemoveAt(DataGridView1.CurrentRow.Index)
    DataGridView1.Rows.Insert(0, data)
    End Sub
    If the DataSource is set then we need to do what was done above but against the underlying data rather than the DataGridView itself. The base logic can be found in
    the following article in LanguageExtensions.vb but please note the code there is for a different type of move yet the logic is still the same in the end.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • Lost the access to the first partion  of the firewire drive and the data ?

    Hello to everybody,
    after i moved 5,5GB Data from my internal harddisk, HFS+ , to my external Firewire drive, FAT 32 formatted for compatilibilty with a PC, i lost the access to the first partion of the firewire drive and the data. At first after having appearently finished copying the data a lot of ununderstable numbers and letters appeared on the first partion and couldn't be opened.
    Using first aid showed the following messages:
    1.
    volume „disk2s5“ testing
    ** /dev/disk2s5
    ** Phase 1 - Read FAT
    ** Phase 2 - Check Cluster Chains
    ** Phase 3 - Checking Directories
    Root directory doesn't start a cluster chain
    Error: the basic (????? ) process shows an error by finishing (-9972)
    German original message:
    Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
    2.
    volume „disk2s5“ testing
    ** /dev/disk2s5
    ** Phase 1 - Read FAT
    ** Phase 2 - Check Cluster Chains
    ** Phase 3 - Checking Directories
    Root directory doesn't start a cluster chain
    Error: the basic (????? ) process shows an error by finishing (-9972)
    German original message:
    Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
    Volume „FIRE2“ testing
    ** /dev/disk2s6
    ** Phase 1 - Read FAT
    ** Phase 2 - Check Cluster Chains
    ** Phase 3 - Checking Directories
    ** Phase 4 - Checking for Lost Files
    16 files, 726592 free (1880420 clusters)
    Volume „FIRE 3“ testing
    Mounting Disk** /dev/disk2s7
    ** Phase 1 - Read FAT
    ** Phase 2 - Check Cluster Chains
    ** Phase 3 - Checking Directories
    ** Phase 4 - Checking for Lost Files
    149 files, 2866032 free (441271 clusters)
    Volume „FIRE 4“ testing
    Mounting Disk** /dev/disk2s8
    ** Phase 1 - Read FAT
    ** Phase 2 - Check Cluster Chains
    ** Phase 3 - Checking Directories
    ** Phase 4 - Checking for Lost Files
    2755 files, 1396016 free (873683 clusters)
    3 Volumes tested
    0 HFS-Volumes tested
    2 Volumes with an other type than HFS tested
    1 Volume couldn't be tested
    1 Volume wasn't tested
    3.
    First Aid interrupted the testing of "disk2s5" because the the following error has appeared:
    the basic (????? ) process shows an error by finishing
    German orignal message:
    Das Festplatten-Dienstprogramm hat überprüfen „disk2s5“ unterbrochen, da der folgende Fehler aufgetreten ist:
    Der zugrundeliegende Prozess meldete einen Fehler beim Beenden.
    As i translated the First Aid messages from german to english they will probably look a bit different in english but i hope you get the idea.
    So what can i do to regain access to the first partion and the data ?
    If i have to use the terminal then please !!! step by step as i don't have any experience in using it
    Greetings and thanks in advance for any hints
    Lutz
    PD: i was just arranging my data into different categories so could later burn a backup when this happened
    g4 AGP 400 MHz   Mac OS X (10.3.9)   768 MB SDRAM

    Yep, you sure can. That's how I support my family's computers. I just entered their dynamic hostname in ARD, and it always updates their IP address in the ARD list should they have changed.

  • Can not get Itunes match to work. It stops on the first step and on my status bar it just says "sending information to apple" this goes on for hours. Help please.

    Help please. I cannt get itunes match to work. It just stops on the first step and the status bar continues to say "sending information to apple" for hours. Any ideas?

    I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

  • How do i prevent the system from keeping what u type - username, sites, etc. on search box, i just type the first letter and it comes up immediately; even my username!

    When I go to a search box, i type in the first letter and the whole word comes up.
    I type in the first letter of the username and the whole word comes up.
    I just type anything and the next time i log, it remembers the whole word.
    Please take this out of my system. I do not want it to work this way. I want all memory to be gone.

    I'm starting to come to this conclusion myself, actually... though, how mom managed to do this on accident without mucking about in terminals or anything more than just a cursory knowledge of the OS X system configurations (behind the scenes), I don't know : |
    ... on the other hand, her and I tend to be the exceptions to a lot of rules : |
    I downloaded and installed TinkerTool, even though it supposedly doesn't work past 10.5.8, in the hoopes that, what it displayed (regardless of what it could change) would be correct as far as my "System" and "System (Headlines)" font settings were (see attached screenshot of the font section of TinkerTool for my system--not mom's).
    I've instructed her to install and run the utility (but not to change anything) and then send me a screenshot of the "Fonts" section so I can compare it to my own. If there's something different on her system, since TinkerTool should work on hers, we may be able to fix it that way... though it would, frustratingly enough, remain a mystery to all concerned as to how she managed to stumble upon this in the first place : |
    Anyway, I'm still hard at work on it... hopefully others are too and will share what they discover (if anything).

Maybe you are looking for