Insert into two tables with a single query (same ID)

Hello,
I want to insert two tables at the same time ( with a single query) provided that both records get inserted with the same id. How do I do this?
Table Movies
id
name
Table Category
movie_id
cat_typea) Insert into first table, retrieve the id (may be by using my_sequence.currval and then insert into another table.
issue: Makes three query to the db, I am also guessing that when multiple people try to insert there will be an issue, I might be wrong.
I don't have any other idea.
Greatly appreciated!

Why don't use multitable insert ? It's available from 9i.
A sequence.nextval will return the same value within the whole instruction
so all records can be inserted with the same id.
Look at this example:
DROP TABLE A;
DROP TABLE B;
drop sequence a_seq;
CREATE TABLE A(
  ID NUMBER,
  FIRSTNAME VARCHAR2(50)
CREATE TABLE B AS
SELECT id, firstname lastname FROM a;
CREATE SEQUENCE a_seq
START WITH 1;
INSERT ALL
INTO A(ID, FIRSTNAME) VALUES(A_SEQ.NEXTVAL, FNAME)
INTO B(ID, LASTNAME) VALUES(A_SEQ.NEXTVAL, LNAME)
SELECT 'fname ' || LEVEL FNAME, 'lname ' || LEVEL LNAME
FROM DUAL
CONNECT BY LEVEL < 10
COMMIT;
SELECT * FROM A;
SELECT * FROM b;
DROP TABLE A succeeded.
DROP TABLE B succeeded.
drop sequence a_seq succeeded.
CREATE TABLE succeeded.
CREATE TABLE succeeded.
CREATE SEQUENCE succeeded.
18 rows inserted
commited
ID                     FIRSTNAME                                         
3                      fname 1                                           
4                      fname 2                                           
5                      fname 3                                           
6                      fname 4                                           
7                      fname 5                                           
8                      fname 6                                           
9                      fname 7                                           
10                     fname 8                                           
11                     fname 9                                           
9 rows selected
ID                     LASTNAME                                          
3                      lname 1                                           
4                      lname 2                                           
5                      lname 3                                           
6                      lname 4                                           
7                      lname 5                                           
8                      lname 6                                           
9                      lname 7                                           
10                     lname 8                                           
11                     lname 9                                           
9 rows selected

Similar Messages

  • Insert into two tables with trigger on PK in second table

    Hi evereone, ineed help.
    I have two tables (organizations, addresses).
    On addresses table i have trigger on PK. When i do insert i must get this param and insert into OrganizationTable for reference.
    Without ADF i can do insert with returning on addresses, than do insert on organizations with this returning param. How can i do this in ADF business logic using trainTaskFlow?
    Thanks all.
    Edited by: WaterStream on 15.10.2012 15:10

    thanks for reply, but i found solution in this materials:
    http://liuwuhua.blogspot.com/2010/11/master-detail-crud-in-adf-bc.html
    (on this link anyone can download model and see all params)
    but in my project i will get JBO-25030 error.
    Solution founded here:
    http://vtkrishn.com/2011/02/09/oracle-jbo-invalidownerexception/
    Work great!!!

  • How to insert into two tables using a Single ADF creation form?

    Hi,
    I need to make a ADF Creation Form that will insert the data at same time in two tables... Like i have two tables Track (Track_id,Track_Name)
    and Module ( Module_id, Track_id, Module_name, Module_Short_name) and i have to insert the data in both the tables using Same Creation Form.
    can anybody help me out and gave me the solution,how to do that?
    Thanks

    if you want to insert different data into two different tables then you can drag the two data objects into creation form..
    If you want to duplicate the data inserted in the one table to another then you can follow two approach
    1. Drag and drop one table, When Save button is invoked then insert data into another table using callable statement.
    or
    2. Create on-insert trigger in Table1 where you can insert data into table2.
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How can I update the table with a single query for...

    I have a table with columns C1 and C2.
    C1 C2
    A1 null
    A1 null
    A1 null
    A1 null
    A2 null
    A2 null
    A2 null
    A3 null
    A4 null
    A4 null
    I want to update my table with a single query so that I would have data like
    C1 C2
    A1 1
    A1 2
    A1 3
    A1 4
    A2 1
    A2 2
    A2 3
    A3 1
    A4 1
    A4 2
    The updated column C2 has the values like serial no grouped on the column C1.

    SQL> create table mytable
      2  ( c1 varchar2(2)
      3  , c2 number(2)
      4  )
      5  /
    Tabel is aangemaakt.
    SQL> insert into mytable (c1)
      2  select 'A1' from dual union all
      3  select 'A1' from dual union all
      4  select 'A1' from dual union all
      5  select 'A1' from dual union all
      6  select 'A2' from dual union all
      7  select 'A2' from dual union all
      8  select 'A2' from dual union all
      9  select 'A3' from dual union all
    10  select 'A4' from dual union all
    11  select 'A4' from dual
    12  /
    10 rijen zijn aangemaakt.
    SQL> select * from mytable
      2  /
    C1                                     C2
    A1
    A1
    A1
    A1
    A2
    A2
    A2
    A3
    A4
    A4
    10 rijen zijn geselecteerd.
    SQL> merge into mytable t1
      2  using (select c1
      3              , row_number() over (partition by c1 order by null) rn
      4              , rowid rid
      5           from mytable
      6        ) t2
      7     on (t1.rowid = t2.rid)
      8   when matched then
      9        update set c2 = rn
    10   when not matched then
    11        insert values (null,null)
    12  /
    10 rijen zijn samengevoegd.
    SQL> select * from mytable
      2  /
    C1                                     C2
    A1                                      1
    A1                                      2
    A1                                      3
    A1                                      4
    A2                                      1
    A2                                      2
    A2                                      3
    A3                                      1
    A4                                      1
    A4                                      2
    10 rijen zijn geselecteerd.Regards,
    Rob.

  • Insert into two tables

    I want to input a set of data into form text fields then
    insert that data into a table plus insert one of those fields into
    another table when the form button is clicked.
    I've played around with Recordsets etc but I can't work out
    how to define a server behaviour which will enable me to do what I
    want. I'm using DWMX 2004 by the way.
    Probably simple but I'm new to this and can't find an
    explanation anywhere in the help files. Perhaps one of the resident
    gurus could offer me some advice?
    TIA, Ken

    quote:
    Originally posted by:
    Newsgroup User
    old-celt wrote:
    > I want to input a set of data into form text fields then
    insert that data into
    > a table plus insert one of those fields into another
    table when the form button
    > is clicked.
    You can't insert data into two tables in a single operation.
    It requires
    two insert record queries to be run in succession.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/
    Can I make the two insert queries run from a single form
    button press? Shoould I have a recordset or write two separate
    queries, one for each table?

  • Insert into two tables, how to insert multiple slave records

    Hi, I have a problem with insert into two tables wizard.
    The wizard works fine and I can add my records, but I need to enter multiple slave table records.
    My database:
    table: paper
    `id_paper` INTEGER(11) NOT NULL AUTO_INCREMENT,
    `make` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
    `model` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
    `gsm` INTEGER(11) NOT NULL,
    PRIMARY KEY (`id_paper`)
    table: paper_data
    `id_paper_data` INTEGER(11) NOT NULL AUTO_INCREMENT,
    `id_paper` INTEGER(11) NOT NULL,
    `value` DOUBLE(15,3) NOT NULL,
    `nanometer` INTEGER(11) NOT NULL,
    PRIMARY KEY (`id_paper_data`)
    I need to add multiple fields "value" and "nanometer"
    Current form looks like this:
    Make:
    Model:
    Gsm:
    Value:
    nanometer:
    I need it to look like this:
    Make:
    Model:
    Gsm:
    Value:
    nanometer:
    Value:
    nanometer:
    Value:
    nanometer:
    Value:
    nanometer:
    and so on.
    The field "id_paper" in table paper_data needs to get same id for entire transaction. Also how do I set default values for each field "nanometer" on my form the must be different (370,380,390 etc)?
    Thanks.

    you can find an answer here: http://209.85.129.132/search?q=cache:PzQj57dsWmQJ:www.experts-exchange.com/Web_Development /Software/Macromedia_Dreamweaver/Q_23713792.html+Insert+Into+Two+Tables+Wizard&cd=3&hl=lt& ct=clnk&gl=lt
    This is a copy of the post:
    Hi experts,
    Im using ADDT to design a page that needs to insert one record into a master ALBUMS table, along with three records into a GENRES table, all linked by the primary, auto-incremented ALBUMS. ALBUM_ID.
    Ive tried many different ways of combining the Insert into Multiple Tables wizard and the insert record wizard with Link Transactions, all with no luck.  Either only the album info gets inserted, or a ALBUM_ID cannot be null error from MySQL.  Here is the structure of the tables
    ALBUMS
    ALBUM_ID, INT(11), Primary, Auto_Increment
    alb_name, varchar
    alb_release, YEAR
    USER_ID, int
    alb_image, varchar
    GENRES
    ALBUM_ID, int, NOT NULL
    GENRE_ID, int, NOT NULL
    ID, int, primary, auto-increment
    Many thanks in advance...
    ==========================================================================================
    //remove this line if you want to edit the code by hand
    function Trigger_LinkTransactions(&$tNG) {
      global $ins_genres;
      $linkObj = new tNG_LinkedTrans($tNG, $ins_genres);
      $linkObj->setLink("ALBUM_ID");
      return $linkObj->Execute();
    function Trigger_LinkTransactions2(&$tNG) {
      global $ins_genres2;
      $linkObj = new tNG_LinkedTrans($tNG, $ins_genres2);
      $linkObj->setLink("ALBUM_ID");
      return $linkObj->Execute();
    function Trigger_LinkTransactions3(&$tNG) {
      global $ins_genres3;
      $linkObj = new tNG_LinkedTrans($tNG, $ins_genres3);
      $linkObj->setLink("ALBUM_ID");
      return $linkObj->Execute();
    //end Trigger_LinkTransactions trigger
    //-----------------------Different Section---------------------//
    // Make an insert transaction instance
    //Add Record Genre 1
    $ins_genres = new tNG_insert($conn_MySQL);
    $tNGs->addTransaction($ins_genres);
    $ins_genres->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
    $ins_genres->registerTrigger("BEFORE", "Trigger_Default_FormValidation", 10, $detailValidation);
    $ins_genres->setTable("genres");
    $ins_genres->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID");
    $ins_genres->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
    $ins_genres->setPrimaryKey("ID", "NUMERIC_TYPE");
    // Add Record Genre 2
    $ins_genres2 = new tNG_insert($conn_MySQL);
    $tNGs->addTransaction($ins_genres2);
    $ins_genres2->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
    $ins_genres2->setTable("genres");
    $ins_genres2->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID2");
    $ins_genres2->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
    $ins_genres2->setPrimaryKey("ID", "NUMERIC_TYPE");
    // Add Record Genre 3
    $ins_genres3 = new tNG_insert($conn_MySQL);
    $tNGs->addTransaction($ins_genres3);
    $ins_genres3->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
    $ins_genres3->setTable("genres");
    $ins_genres3->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID3");
    $ins_genres3->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
    $ins_genres3->setPrimaryKey("ID", "NUMERIC_TYPE");
    =========================================================================================
    Hi Aaron,
    Nice job!!
    $ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions2", 98);
    $ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions3", 98);
    These lines, right? :-( Sorry I forgot to mention that
    Thanks a lot for the grading!

  • Constantly inserting into large table with unique index... Guidance?

    Hello all;
    So here is my world. We have central to our data monitoring system an oracle database running Oracle Standard One (please don't laugh... I understand it is comical) licensing.
    This DB is about 1.7 TB of small record data.
    One table in particular (the raw incoming data, 350gb, 8 billion rows, just in the table) is fed millions of rows each day in real time by two to three main "data collectors" or what have you. Data must be available in this table "as fast as possible" once it is received.
    This table has 6 columns (one varchar usually empty, a few numerics including a source id, a timestamp and a create time).
    The data is collect in chronological order (increasing timestamp) 90% of the time (though sometimes the timestamp may be very old and catch up to current). The other 10% of the time the data can be out of order according to the timestamp.
    This table has two indexes, unique (sourceid, timestamp), and a non unique (create time). (FYI, this used to be an IOT until we had to add the second index on create time, at which point a secondary index on create time slowed the IOT to a crawl)
    About 80% of this data is removed after it ages beyond 3 months; 20% is retained as "special" long term data (customer pays for longer raw source retention). The data is removed using delete statements. This table is never (99.99% of the time) updated. The indexes are not rebuilt... ever... as a rebuild is about a 20+ hour process, and without online rebuilds since we are standard one, this is just not possible.
    Now what we are observing is that the inserts into this table
    - Inserts are much slower based on a "wider" cardinality of the "sourceid" of the data being inserted. What I mean is that 10,000 inserts for 10,000 sourceid (regardless of timestamp) is MUCH, MUCH slower than 10,000 inserts for a single sourceid. This makes sense to me, as I understand it that oracle must inspect more branches of the index for uniqueness, and more different physical blocks will be used to store the new index data. There are about 2 million unique sourceId across our system.
    - Over time, oracle is requesting more and more ram to satisfy these inserts in a timely matter. My understanding here is that oracle is attempting to hold the leafs of these indexes perpetually buffers. Our system does have a 99% cache hit rate. However, we are seeing oracle requiring roughly 10GB extra ram per quarter to 6 months; we're at about 50gb of ram just for oracle already.
    - If I emulate our production load on a brand new, empty table / indexes, performance is easily 10x to 20x faster than what I see when I do the same tests with the large production copies of data.
    We have the following assumption: Partitioning this table based on good logical grouping of sourceid, and then timestamp, will help reduce the work required by oracle to verify uniqueness of data, reducing the amount of data that must be cached by oracle, and allow us to handle our "older than 3 month" at a partition level, greatly reducing table and index fragmentation.
    Based on our hardware, its going to be about a million dollar hit to upgrade to Enterprise (with partitioning), plus a couple hundred thousand a year in support. Currently I think we pay a whopping 5 grand a year in support, if that, total oracle costs. This is going to be a huge pill for our company to swallow.
    What I am looking for guidance / help on, should we really expect partitioning to make a difference here? I want to get that 10x performance difference back we see between a fresh empty system, and our current production system. I also want to limit oracles 10gb / quarter growing need for more buffer cache (the cardinality of sourceid does NOT grow by that much per quarter... maybe 1000s per quarter, out of 2 million).
    Also, please I'd appreciate it if there were no mocking comments about using standard one up to this point :) I know it is risky and insane and maybe more than a bit silly, but we make due with what we have. And all the credit in the world to oracle that their "entry" level system has been able to handle everything we've thrown at it so far! :)
    Alright all, thank you very much for listening, and I look forward to hear the opinions of the experts.

    Hello,
    Here is a link to a blog article that will give you the right questions and answers which apply to your case:
    http://jonathanlewis.wordpress.com/?s=delete+90%25
    As far as you are deleting 80% of your data (old data) based on a timestamp, then don't think at all about using the direct path insert /*+ append */ as suggested by one of the contributors to this thread. The direct path load will not re-use any free space made by the delete. You have two indexes:
    (a) unique index (sourceid, timestamp)
    (b) index(create time)
    Your delete logic (based on arrival time) will smatch your indexes as far as you are always deleting the left hand side of the index; it means you will have what we call a right hand index - In other words, the scattering of the index key per leaf block is certainly catastrophic (there is an oracle iternal function named sys_op_lidbid that will allow you to verify this index information). There is a fairly chance that your two indexes will benefit from a coalesce as already suggested:
               ALTER INDEX indexname COALESCE;This coalesce should be investigated to be done on a regular basis (may be after each 80% delete) You seem to have several sourceid for one timestamp. If the answer is yes you should think about compressing this index
        create index indexname (sourceid, timestamp) compress;     
    or
        alter index indexname rebuild compress;     You will do it only once. Your index will have a smaller size and may be more efficient than it is actually. The index compression will add an extra CPU work during an insert but it might help improving the overal insert process.
    Best Regards
    Mohamed Houri

  • How to insert into a table with a nested table which refer to another table

    Hello everybody,
    As the title of this thread might not be very understandable, I'm going to explain it :
    In a context of a library, I have an object table about Book, and an object table about Subscriber.
    In the table Subscriber, I have a nested table modeling the Loan made by the subscriber.
    And finally, this nested table refers to the Book table.
    Here the code concerning the creation of theses tables :
    Book :
    create or replace type TBook as object
    number int,
    title varchar2(50)
    Loan :
    create or replace type TLoan as object
    book ref TBook,
    loaning_date date
    create or replace type NTLoan as table of TLoan;
    Subscriber :
    create or replace type TSubscriber as object
    sub_id int,
    name varchar2(25)
    loans NTLoan
    Now, my problem is how to insert into a table of TSubscriber... I tried this query, without any success...
    insert into OSubscriber values
    *(1, 'LEVEQUE', NTLoan(*
    select TLoan(ref(b), '10/03/85') from OBook b where b.number = 1)
    Of course, there is an occurrence of book in the table OBook with the number attribute 1.
    Oracle returned me this error :
    SQL error : ORA-00936: missing expression
    00936. 00000 - "missing expression"
    Thank you for your help

    1) NUMBER is a reserved word - you can't use it as identifier:
    SQL> create or replace type TBook as object
      2  (
      3  number int,
      4  title varchar2(50)
      5  );
      6  /
    Warning: Type created with compilation errors.
    SQL> show err
    Errors for TYPE TBOOK:
    LINE/COL ERROR
    0/0      PL/SQL: Compilation unit analysis terminated
    3/1      PLS-00330: invalid use of type name or subtype name2) Subquery must be enclosed in parenthesis:
    SQL> create table OSubscriber of TSubscriber
      2  nested table loans store as loans
      3  /
    Table created.
    SQL> create table OBook of TBook
      2  /
    Table created.
    SQL> insert
      2    into OBook
      3    values(
      4           1,
      5           'No Title'
      6          )
      7  /
    1 row created.
    SQL> commit
      2  /
    Commit complete.
    SQL> insert into OSubscriber
      2    values(
      3           1,
      4           'LEVEQUE',
      5           NTLoan(
      6                  (select TLoan(ref(b),DATE '1985-10-03') from OBook b where b.num = 1)
      7                 )
      8          )
      9  /
    1 row created.
    SQL> select  *
      2    from  OSubscriber
      3  /
        SUB_ID NAME
    LOANS(BOOK, LOANING_DATE)
             1 LEVEQUE
    NTLOAN(TLOAN(000022020863025C8D48614D708DB5CD98524013DC88599E34C3D34E9B9DBA1418E49F1EB2, '03-OCT-85'))
    SQL> SY.

  • Fetch data from one table and insert into two tables in desired format

    I have similar to the following data in a table and it is not normalized. The groupID is being used to group two records of similar nature.
    DECLARE @OldDoc TABLE (oldDocID INT, groupID INT, deptID INT)
    INSERT INTO @OldDoc (oldDocID, groupID) VALUES (1, NULL, 111),(2,NULL,111),(3,1,111),(4,NULL,333),(5,1,222),(6,NULL,333),(7,2,222),(8,2,333),(9,NULL,111),(10,3,222),(11,NULL,333),(12,3,444)
    I need to process the data from the above table (@OldDoc) and write into two new tables (@NewDoc and @NewDocGroup) as follows.
    oldDocID should be stored as newDocID when inserting to @NewDoc table. Only records with groupID NULL and one record (first one) per group should be considered (For example, oldDocID 5 is not considered as 3 and 5 belong to the same groupID 1) for insertion. 
    DECLARE @NewDoc TABLE (newDocID INT)
    INSERT INTO @NewDoc (newDocID) VALUES (1),(2),(3),(4),(6),(7),(9),(10),(11)
    All records from @OldDoc should be considered for insertion into @NewDocGroup table. OldDocID is inserted as NewDocID and deptID is as-is. Instead of groupID, the ID of the first record in the 
    group should be considered as parentNewDocID (For example, 3 is considered as parentNewDocID for newDocID 5 as 3 and 5 belong to the same groupID in @OldDoc table) for the newDocID.
    DECLARE @NewDocGroup (newDocID INT, parentNewDocID INT, deptID INT)
    INSERT INTO @NewDocGroup (newDocID, parentNewDocID, deptID) VALUES (1,1,111),(2,2,111),(3,3,111),(4,4,333),(5,3,222),(6,6,333),(7,7,222),(8,7,333),(9,9,111),(10,10,222),(11,11,333),(12,10,444)
    How do I accomplish the above using SQL ? Thanks for the help.

    >> I have similar to the following data in a table and it is not normalized. The group_id is being used to group two records [sic] of similar nature. <<
    Rows are not records. Tables have to have a key by definition. You do not do math with identifiers, so they should not be numeric. Let's ignore that error for now. In short, you are posting garbage. If you had followed Forum Netiquette, would you have posted
    this? 
    CREATE TABLE Old_Documents
    (old_doc_id INTEGER NOT NULL PRIMARY KEY, 
     group_id INTEGER, 
     dept_nbr INTEGER NOT NULL
       REFERENCES Departments (dept_nbr));
    INSERT INTO Old_Documents(old_doc_id, group_id, dept_nbr) 
    VALUES  (1, NULL, 111), 
    (2, NULL, 111), 
    (3, 1, 111), 
    (4, NULL, 333), 
    (5, 1, 222), 
    (6, NULL, 333), 
    (7, 2, 222), 
    (8, 2, 333), 
    (9, NULL, 111), 
    (10, 3, 222), 
    (11, NULL, 333), 
    (12, 3, 444);
    >> I need to process the data from the above table (Old_Documents) and write into two new tables (New_Documents and New_Documents_Groups) as follows. <<
    Just like punch cards and mag tape data processing! Being old and being new are a status, not another kind of entity. But that is how mag tapes work. And you even use the verb "fetch" from tape files. This design flaw is called  attribute splitting.
    Do you have a Male_Personnel and Female_Personnel table? NO! It is just Personnel! 
    >> old_doc_id should be stored as new_doc_id when inserting to New_Documents table. Only records [sic] with group_id NULL and one record [sic] (first [sic; no ordering in a table] one) per group should be considered (For example, old_doc_id 5 is not considered
    as 3 and 5 belong to the same group_id =1) for insertion. <<
    Think about your punch card mindset. Why did you physically materialize that redundant New_Documents table? Let me answer that: this is how you work with punch cards! In SQL we use a VIEW:
    CREATE VIEW New_Documents (new_doc_id)
    AS 
    SELECT old_doc_id 
      FROM Old_Documents;
    >> All records [sic] from Old_Documents should be considered for insertion into New_Documents_Groups table. The old_doc_id is inserted as new_doc_id and dept_nbr is as-is. Instead of group_id, the ID [sic: which identifier??] of the first [sic: tables
    have no ordering like a deck of punch cards] record [sic] in the group should be considered as parent_new_doc_id (For example, 3 is considered as parent_new_doc_id for new_doc_id 5 as 3 and 5 belong to the same group_id in Old_Documents table) for the new_doc_id.
    <<
    Why not use 5 as the parent? My guess is that you are trying to form equivalence classes. See:
    https://www.simple-talk.com/content/print.aspx?article=2020
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Record not inserting into sap table with connector framework ?

    here is the code, but record not being inserting into the table ... but same piece of code working fine while updating ... the record ...
    try {
    interaction = connection.createInteractionEx();
    IInteractionSpec interactionSpec = interaction.getInteractionSpec();
    String functionName = "Z_XYZ";
    interactionSpec.setPropertyValue("Name", functionName);
    String writingTable = "MYTABLE";
    RecordFactory rf = interaction.getRecordFactory();
    MappedRecord importParams = rf.createMappedRecord("input");
    importParams.put("ATTR1", "VALUE1");
    importParams.put("ATTR2", "VALUE2");
    IFunction function = connection.getFunctionsMetaData().getFunction(functionName);
    IStructureFactory sf = interaction.retrieveStructureFactory();
    IRecordSet table = (IRecordSet) sf.getStructure(function.getParameter(writingTable).getStructure());
    table.insertRow();
    table.setString("ATNAME", "VALUE");
    table.setString("ATWRT", "VALUE");
    importParams.put(writingTable, table);
    MappedRecord output = (MappedRecord) interaction.execute(interactionSpec, importParams);
    } catch (Exception e) {
    any idea?
    than ks
    MMK

    Hi Mohan,
    Does a creation through SE37 with the same input work?
    Yoav.

  • Taking More Time while inserting into the table (With foriegn key)

    Hi All,
    I am facing problem while inserting the values into the master table.
    The problem,
    Table A -- User Master Table (Reg No, Name, etc)
    Table B -- Transaction Table (Foreign key reference with Table A).
    While inserting the data's in Table B, i need to insert the reg no also in table B which is mandatory. I followed the logic which is mentioned in the SRDemo.
    While inserting we need to query the Table A first to have the values in TableABean.java.
    final TableA tableA= (TableA )uow.executeQuery("findUser",TableA .class, regNo);
    Then, we need to create the instance for TableB
    TableB tableB= (TableB)uow.newInstance(TableB.class);
    tableB.setID(bean.getID);
    tableA.addTableB(tableB); --- this is for to insert the regNo of TableA in TableB.. This line is executing the query "select * from TableB where RegNo = <tableA.getRegNo>".
    This query is taking too much time if values are more in the TableB for that particular registrationNo. Because of this its taking more time to insert into the TableB.
    For Ex: TableA -- regNo : 101...having less entry in TableB means...inserting record is taking less than 1 sec
    regNo : 102...having more entry in TableB means...inserting record is taking more than 2 sec
    Time delay is there for different users when they enter transaction in TableB.
    I need to avoid this since in future it will take more time...from 2 sec to 10 sec, if volume of data increases mean.
    Please help me to resolve this issue...I am facing it now in production.
    Thanks & Regards
    VB

    Hello,
    Looks like you have a 1:M relationship from TableA to TableB, with a 1:1 back pointer from TableB to TableA. If triggering the 1:M relationship is causing you delays that you want to avoid there might be two quick ways I can see:
    1) Don't map it. Leave the TableA->TableB 1:M unmapped, and instead just query for relationship when you do need it. This means you do not need to call tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA), so that the TableB->TableA relation gets set. Might not be the best option, but it depends on your application's usage. It does allow you to potentially page the TableB results or add other query query performance options when you do need the data though.
    2) You are currently using Lazy loading for the TableA->TableB relationship - if it is untriggered, don't bother calling tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA). This of course requires using TopLink api to a) verify the collection is an IndirectCollection type, and b) that it is hasn't been triggered. If it has been triggered, you will still need to call tableA.addTableB(tableB), but it won't result in a query. Check out the oracle.toplink.indirection.IndirectContainer class and it's isInstantiated() method. This can cause problems though in highly concurrent environments, as other threads may have triggered the indirection before you commit your transaction, so that the A->B collection is not up to date - this might require refreshing the TableA if so.
    Change tracking would probably be the best option to use here, and is described in the EclipseLink wiki:
    http://wiki.eclipse.org/Introduction_to_EclipseLink_Transactions_(ELUG)#Attribute_Change_Tracking_Policy
    Best Regards,
    Chris

  • Apex Application inserting into two tables from two regions in a page

    Hey Guys,
    Fairly new to apex like two days. So please bare with me. I am using apex 4.0.2.00.07.
    I have a page with two regions. The first region has only one row and I have no problems accessing it and inserting those values into the table this is what I used to access one column from that one row APEX_APPLICATION.G_F03(1)
    The second region is an interactive report, to which I have managed to add a checkbox and a textbox.
    1)So if a checkbox has been checked off the row should be inserted
    2) if the textbox has been entered it should replaceone of the values.
    My question is how to access the second region? I started a loop based on the rows in the collection but that is as far as I got.
    FOR idx IN 1..l_collectionTable_name
    loop
    end loop
    Any help would be greatly appreciated?
    Thank you
    Edited by: Aj05 on Aug 2, 2012 2:10 PM

    Hi Phil I used the following code
    <cfquery name="qArrivalDates" datasource="rayannesql">
    SET NOCOUNT ON
    INSERT INTO booking (book_made, book_checkin_date,
    book_checkout_date, book_adults, book_children)
    VALUES('#FORM.book_made#','#FORM.book_checkin_date#','#FORM.book_checkout_date#','#FORM.bo ok_adults#','#FORM.book_children#')
    SELECT SCOPE_IDENTITY() AS theNewId;
    SET NOCOUNT OFF
    </cfquery>
    <cfquery name="qArrivalDates" datasource="rayannesql">
    INSERT INTO Customer( firstname, lastname, address, address2,
    city, state, postalcode, country, phone, mobile, email, notes)
    Values (#qArrivalDates.theNewId# '#FORM.firstname#',
    '#FORM.lastname#', '#FORM.address#', '#FORM.address2#',
    '#FORM.city#', '#FORM.state#', '#FORM.postalcode#',
    '#FORM.country#', '#FORM.phone#', '#FORM.mobile#', '#FORM.email#',
    '#FORM.notes#' )
    </cfquery>
    When I tried to complete the form, I got the following error
    Macromedia][SequeLink JDBC Driver][ODBC
    Socket][Microsoft][SQL Native Client][SQL Server]Incorrect syntax
    near 'Fred'.
    The error occurred in
    C:\Inetpub\wwwroot\rayanne\customerinsertsql.cfm: line 16
    14 : <cfquery name="qArrivalDates"
    datasource="rayannesql">
    15 : INSERT INTO Customer( firstname, lastname, address,
    address2, city, state, postalcode, country, phone, mobile, email,
    notes)
    16 : Values (#qArrivalDates.theNewId# '#FORM.firstname#',
    '#FORM.lastname#', '#FORM.address#', '#FORM.address2#',
    '#FORM.city#', '#FORM.state#', '#FORM.postalcode#',
    '#FORM.country#', '#FORM.phone#', '#FORM.mobile#', '#FORM.email#',
    '#FORM.notes#' )
    17 : </cfquery>

  • Insert into temp table with sorting not works

    Hi,
    Am inserting some of the values into temp table . Before going to insert i will be sorting a cloumn in descending order and then i will try insert. But actually inserts in ascending order.Dont know why.
    Please find the code
    Create table #TempTable( column1 smalldateTime )
    Insert into #TempTable
    Select distinct(column1) from table1 where cloumn2 = 1 order by  column1 desc
    When i query the table
    select * from  #TempTable
    shows the dates are in ascending order instead it should in descending
    But when i query this Select distinct(column1) from table1 where cloumn2 = 1 order by  column1 desc
    dates are in descending order which means recent dates fills top

    Or use a CTE = Common Table Expression:
    CREATE TABLE #test (id int);
    INSERT INTO #test
    SELECT object_id
    FROM sys.objects;
    SELECT COUNT(*)
    FROM #test;
    GO
    ;WITH cte AS
    (SELECT Top 2 *
    FROM #test
    ORDER BY id desc)
    DELETE FROM cte;
    GO
    SELECT COUNT(*)
    FROM #test;
    GO
    DROP TABLE #test;
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • MS SQL Server 2014: Error inserting into Temp table with index and identity field

    In this thread, I mentioned a problem with SQL Server 2014:
    SQL Server 2014: Bug with IDENTITY INSERT ON
    The question was answered, it is a bug. To keep you informed on this issue, I open this discussion.
    Problem:
    The code below works perfectly fine on MS SQL Server 2008 R2 and MS SQL Server 2012, but gives an error every second time the proc is executed on MS SQL Server 2014. If I do not define any index on the temp table, the problem disappears. Defining the index
    after the insert, does not help.
    SET NOCOUNT ON
    GO
    IF EXISTS (SELECT 1 FROM sys.procedures WHERE name = 'usp_Test') DROP PROC dbo.usp_Test;
    GO
    CREATE PROC dbo.usp_Test AS
    BEGIN
    SET NOCOUNT ON
    CREATE TABLE #Source(ID integer NOT NULL);
    INSERT INTO #Source VALUES (1), (2), (3);
    CREATE TABLE #Dest (ID integer IDENTITY(1,1) NOT NULL);
    CREATE INDEX #IDX_Dest ON #Dest (ID);
    PRINT 'Check if the insert might cause an identity crisis';
    SELECT 'Source' AS SourceTable, * FROM #Source;
    SELECT 'Destination' AS DestTable, * FROM #Dest;
    SET IDENTITY_INSERT #Dest ON;
    PRINT 'Do the insert';
    INSERT INTO #Dest (ID) SELECT ID FROM #Source;
    PRINT 'Insert ready';
    SET IDENTITY_INSERT #Dest OFF;
    SELECT * FROM #Dest;
    DROP TABLE #Source;
    DROP TABLE #Dest;
    END;
    GO
    PRINT 'First execution of the proc, everything OK';
    EXEC dbo.usp_Test;
    PRINT '';
    PRINT 'Second execution of the proc, the insert fails.';
    PRINT 'Removing the index #IDX_Dest causes the error to disappear.';
    EXEC dbo.usp_Test;
    GO
    DROP PROC dbo.usp_Test;
    GO

    There is some progress. Communication from a former Microsoft employee tells us this:
    Shivendra Vishal
    Engineer at Microsoft
    I am no longer with MS, and I do not have code access, however from the public symbols, I could make out following:
    sqlmin!SetidentI2I4+0x1f3:
    000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] ds:00000000`00000000=????????????????
    ExceptionAddress: 000007fef4d865d3 (sqlmin!SetidentI2I4+0x00000000000001f3)
    ExceptionCode: c0000005 (Access violation)
    ExceptionFlags: 00000000
    NumberParameters: 2
    Parameter[0]: 0000000000000000
    Parameter[1]: 0000000000000000
    Attempt to read from address 0000000000000000
    This is a read AV and from registers it is clear that we were trying to move the value of location pointed by qword of register rax which is not valid:
    rax=0000000000000000 rbx=0000000000000038 rcx=0000000000001030
    rdx=0000000000000006 rsi=00000001f55def98 rdi=00000000106fd070
    rip=000007fef4d865d3 rsp=00000000106fcf40 rbp=00000000106fcfe9
    r8=0000000000000000 r9=00000001f55def60 r10=00000001f55defa0
    r11=00000000106fcd20 r12=0000000000000000 r13=0000000000000002
    r14=00000001f49c3860 r15=00000001f58c0040
    iopl=0 nv up ei pl nz na po nc
    cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
    The stack is:
    # Child-SP RetAddr Call Site
    00 00000000`106fcf40 000007fe`f30c1437 sqlmin!SetidentI2I4+0x1f3
    01 00000000`106fd050 000007fe`f474e7ce sqlTsEs!CEsExec::GeneralEval4+0xe7
    02 00000000`106fd120 000007fe`f470e6ef sqlmin!CQScanUpdateNew::GetRow+0x43d
    03 00000000`106fd1d0 000007fe`f08ff517 sqlmin!CQueryScan::GetRow+0x81
    04 00000000`106fd200 000007fe`f091cebe sqllang!CXStmtQuery::ErsqExecuteQuery+0x36d
    05 00000000`106fd390 000007fe`f091ccb9 sqllang!CXStmtDML::XretDMLExecute+0x2ee
    06 00000000`106fd480 000007fe`f08fa058 sqllang!CXStmtDML::XretExecute+0xad
    07 00000000`106fd4b0 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
    08 00000000`106fd5f0 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
    09 00000000`106fd7e0 000007fe`f152cfaa sqllang!CSQLSource::Execute+0x86c
    0a 00000000`106fd9b0 000007fe`f152c9e8 sqllang!CStmtExecProc::XretLocalExec+0x25a
    0b 00000000`106fda30 000007fe`f152a1d8 sqllang!CStmtExecProc::XretExecExecute+0x4e8
    0c 00000000`106fe1e0 000007fe`f08fa058 sqllang!CXStmtExecProc::XretExecute+0x38
    0d 00000000`106fe220 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
    0e 00000000`106fe360 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
    0f 00000000`106fe550 000007fe`f0902267 sqllang!CSQLSource::Execute+0x86c
    10 00000000`106fe720 000007fe`f0909087 sqllang!process_request+0xa57
    11 00000000`106feee0 000007fe`f2bf49d0 sqllang!process_commands+0x4a3
    12 00000000`106ff200 000007fe`f2bf47b4 sqldk!SOS_Task::Param::Execute+0x21e
    13 00000000`106ff800 000007fe`f2bf45b6 sqldk!SOS_Scheduler::RunTask+0xa8
    14 00000000`106ff870 000007fe`f2c136ff sqldk!SOS_Scheduler::ProcessTasks+0x279
    15 00000000`106ff8f0 000007fe`f2c138f0 sqldk!SchedulerManager::WorkerEntryPoint+0x24c
    16 00000000`106ff990 000007fe`f2c13246 sqldk!SystemThread::RunWorker+0x8f
    17 00000000`106ff9c0 000007fe`f2c13558 sqldk!SystemThreadDispatcher::ProcessWorker+0x3ab
    18 00000000`106ffa70 00000000`775d59ed sqldk!SchedulerManager::ThreadEntryPoint+0x226
    19 00000000`106ffb10 00000000`7780c541 kernel32!BaseThreadInitThunk+0xd
    1a 00000000`106ffb40 00000000`00000000 ntdll!RtlUserThreadStart+0x21
    Unassembling the function:
    000007fe`f4d8658e 4c8b10 mov r10,qword ptr [rax]
    000007fe`f4d86591 4533e4 xor r12d,r12d
    000007fe`f4d86594 410fb7d5 movzx edx,r13w
    000007fe`f4d86598 4533c9 xor r9d,r9d
    000007fe`f4d8659b 4533c0 xor r8d,r8d
    000007fe`f4d8659e 488bc8 mov rcx,rax
    000007fe`f4d865a1 4489642420 mov dword ptr [rsp+20h],r12d
    000007fe`f4d865a6 41ff5230 call qword ptr [r10+30h]
    000007fe`f4d865aa 8b5597 mov edx,dword ptr [rbp-69h]
    000007fe`f4d865ad 4c8b10 mov r10,qword ptr [rax]
    000007fe`f4d865b0 4489642438 mov dword ptr [rsp+38h],r12d
    000007fe`f4d865b5 4489642430 mov dword ptr [rsp+30h],r12d
    000007fe`f4d865ba 458d442401 lea r8d,[r12+1]
    000007fe`f4d865bf 4533c9 xor r9d,r9d
    000007fe`f4d865c2 488bc8 mov rcx,rax
    000007fe`f4d865c5 c644242801 mov byte ptr [rsp+28h],1
    000007fe`f4d865ca 4488642420 mov byte ptr [rsp+20h],r12b
    000007fe`f4d865cf 41ff5250 call qword ptr [r10+50h]
    000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] <=================== AV happened over here
    000007fe`f4d865d6 488bc8 mov rcx,rax
    000007fe`f4d865d9 4c8bf0 mov r14,rax
    000007fe`f4d865dc ff5268 call qword ptr [rdx+68h]
    000007fe`f4d865df 488d55e7 lea rdx,[rbp-19h]
    000007fe`f4d865e3 4c8b00 mov r8,qword ptr [rax]
    000007fe`f4d865e6 488bc8 mov rcx,rax
    000007fe`f4d865e9 41ff5010 call qword ptr [r8+10h]
    000007fe`f4d865ed f6450a04 test byte ptr [rbp+0Ah],4
    I remember few issues with scan2ident function, I am not sure if they have fixed it however it appears that this is intoduced to SQL 2014 and we need help from MS to get this resolved as it needs code analysis.
    It is not getting simulated for other versions of SQL apart from SQL 2014.
    Also to add, interestingly, the value of rax is not visibly changed and it was successfully passed on to rcx, which has a valid value, so something should have changed the value of rax inside call to function using call qword ptr [r10+50h], and looking at this
    it appears that it might be a list of functions and we are going at particular offset [50h]. So, bottom line is that the call to function qword ptr [r10+50h], should be changing something in rax, and debugging/analyzing this code might give us some more idea.

  • Weird problem w. mysql 4.0 when inserting  into a table with auto_incremet

    Since I upgraded my mysql database from 3.23 to 4.0.1
    the following code does not work anymore:
    I get this error msg:
    <b>"Invalid argument value: Duplicate entry '2147483647' for key 1"</b>
    <code>
    package mysql4test;
    import java.sql.*;
    class test {
    public test() {
    public static void main(String[] args) {
    Connection connection = null;
    Statement st = null;
    try {
    Class.forName("org.gjt.mm.mysql.Driver").newInstance();
    connection = DriverManager.getConnection
    ("jdbc:mysql://192.168.0.4/x?user=x&password=");
    st = connection.createStatement();
    for (int i=1;i<10;i++)
    String insert = "insert into x (b) values('hello');";
    System.out.println(insert);
    st.executeUpdate(insert);
    } catch (Exception ex) { System.err.println(ex.getMessage());}
    </code>
    The table definition of table x is the following:
    create table x(a int(11) primary key auto_increment, b varchar(10));
    What makes the thing even more mysterious is, that doing the same thing as this programm does manually on an mysql client does not produces any error message.
    insert into x (b) values('hello'); works fine on the mysql client deliverd with the server.

    Hi eggsurplus!
    Yes, I succeeded in different ways to solve the problem. changing the table was one of it. but the problem is that i can't simply change all tables (there are a lot) as the are used in other programms.
    The simplest solution that i figured out so far was changing the insert from
    insert into x (b) values('hello')
    to
    insert into x (a,b) values("+i+",'hello')"
    But this solution is still not satisfactory as in more complex programs you can't just use the i variable of the for loop, but you have to add a new variable that increments on every insert.
    This still means changing a lot of code that i wrote for mysql 3.x.
    Besides, i tried also another jdbc driver and it still didn't work.
    The same bug was reported in a PHP forum, but without solution

Maybe you are looking for

  • How can I make an email list from my submissions?

    How can I compile a list of submitted emails to send out a group mailing?

  • Not able to print a layout anymore

    Hello! I have multiple pages in a PDF format that I always print out in a layout format; four PDF pages on one sheet. I used to be able to do that before I upgraded to Leopard. When I open the PDF file via Preview and select print, layout, then four

  • How can I find who deleted my files?

    Hello all. In my local network, A user see my share partitions and files then removed them, How can I find who did it? THanks.

  • Copy From Button Combo

    Hi I am using DI API 8.8 and .net 2.0 to create addon. I have created a COPY FROM button combo with values SALES QUOTATION and SALES ORDER in my user defined form. I am also able to handle the event for that. I want to copy the data from SALES ORDER

  • Z10 Hotmail Issue

    Hello - I have been using my Z10 since April with very few issues. I have my business emails as well as my hotmail account on it. For the last 3-4 days I have an issue with my Hotmail account. In both the Hub and in the account proper, I can only see