Insert key does not function in Wkindows 7

Insert key does not work in Windows 7.  I use this as a toggle to insert / overwrite and since going to Windows 7 SVP1 it does not function. I do an enormous amount of editing and need this function!   Using universal keyboard. 
Thanks!  Kym

Hello,
I'd ask in the
Windows 7 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

  • INSERT key does not toggle INSERT/REPLACE mode

    The INSERT key does not toggle between Insert and Replace mode. The enterabled items are always in insert mode. Does anyone know how to fix this?
    I'm using Forms 6i 6.0.8.17.1, web-deployed on Solaris 2.6 (64 bit).

    You can use a pluggable Java Component to do this and there is an example in the Forms 9i demos.

  • Imp error - ORA-14400: inserted partition key does not map to any partition

    Hi,
    We have a table (table t) with partitions (p1, p2, ... p12) and two of the partitions (p11 and p12) need to be imported into
    another database with different schema. Both the partitions to be imported are in two different export dumps. So, I started
    by dropping the table t and then import with the first export dump (p12). The first import went fine, but the second import
    failed with error:
    IMP-00058: ORACLE error 14400 encountered
    ORA-14400: inserted partition key does not map to any partition
    IMP-00057: Warning: Dump file may not contain data of all partitions of this table
    About to enable constraints...
    Import terminated successfully with warnings.
    The imp command used is:
    imp user/pwd tables=t log=imp.log file=exp.dmp fromuser=db1user touser=db2user ignore=Y grants=n indexes=n constraints=n
    statistics=none
    Please let me know where is the problem and what is the solution? I need to import the second partition (p11) also
    successfully.
    Thanks.
    BNetra

    Created a new partition REST_VALUES with higher range value and all my imports worked fine. But now I have two related issues:
    1) All the data got imported into the new partition instead of correct partitions.
    2) I observed that the column on which the table is partitioned CREATE_DATE values have been changed to today's (import) date for all rows imported into the new partition.
    How do I import properly into respective partitions and not into temporary new partition?
    Why did the CREATE_DATE value got changed automatically during import?
    Thanks.

  • |Error SQL: ORA-14400: inserted partition key does not map to any partition

    I have an installation of ECC6 with BI7 in which consolidated through SEM-BCS OBCS_C10 with the cube, which I have version 100 for fiscal data, 101 data for IFRS and IFRS Copying a 301 version.
    The client will ask me the empty version of the 301 in the cube OBCS_C10.
    Before switching to empty the cube "Target Real-Time Data Can Be Loaded With Data; Planning Not Allowed."
    To empty the cube using transaction RSA1 / manage / contents / Delete Selection.
    However, the data is not erased and revise the job gives me the error:
    Resumen log job para job BI_INDXD51A1NTCIYWU06OKZZESN1R94 / 07520600
    Log job
    Hora
    Txt.mje.no codificado
    04.02.2009
    07:52:06
    El job ha sido lanzado.
    04.02.2009
    07:52:06
    Paso 001 iniciado (programa RSINDEX1, variante &0000000000108, usuario ACHUY)
    04.02.2009
    07:52:10
    SQL: 04.02.2009 07:52:10 ACHUY
    04.02.2009
    07:52:10
    DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
    04.02.2009
    07:52:10
    AND INDEXNAME = ' ' AND TABNAME =
    04.02.2009
    07:52:10
    '/BI0/D0BCS_C101
    04.02.2009
    07:52:10
    SQL-END: 04.02.2009 07:52:10 00:00:00
    04.02.2009
    07:52:10
    SQL: 04.02.2009 07:52:10 ACHUY
    04.02.2009
    07:52:10
    DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
    04.02.2009
    07:52:10
    AND INDEXNAME = ' ' AND TABNAME =
    04.02.2009
    07:52:10
    '/BI0/D0BCS_C101
    04.02.2009
    07:52:10
    SQL-END: 04.02.2009 07:52:10 00:00:00
    04.02.2009
    07:52:10
    SQL: 04.02.2009 07:52:10 ACHUY
    04.02.2009
    07:52:10
    CREATE TABLE "/BI0/0100000076" PCTFREE 00
    04.02.2009
    07:52:10
    PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
    04.02.2009
    07:52:10
    STORAGE (INITIAL     0000000016 K NEXT
    04.02.2009
    07:52:10
    0000000016 K MINEXTENTS  0000000001 MAXEXTENTS
    04.02.2009
    07:52:10
    UNLIMITED PCTINCREASE 0000 FREELISTS   001
    04.02.2009
    07:52:10
    FREELIST GROUPS 01) AS SELECT DISTINCT DIMID FROM
    04.02.2009
    07:52:10
    "/BI0/D0BCS_C101" "DIM" , "/BI0/SCS_VERSION"
    04.02.2009
    07:52:10
    "MD1" WHERE "DIM"."SID_0CS_VERSION" = "MD1"."SID"
    04.02.2009
    07:52:10
    AND ( "MD1"."CS_VERSION" BETWEEN '301' AND '301'
    04.02.2009
    07:52:10
    SQL-END: 04.02.2009 07:52:10 00:00:00
    04.02.2009
    07:52:25
    SQL: 04.02.2009 07:52:25 ACHUY
    04.02.2009
    07:52:25
    DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
    04.02.2009
    07:52:25
    AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
    04.02.2009
    07:52:25
    SQL-END: 04.02.2009 07:52:25 00:00:00
    04.02.2009
    07:52:25
    SQL: 04.02.2009 07:52:25 ACHUY
    04.02.2009
    07:52:25
    DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
    04.02.2009
    07:52:25
    AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
    04.02.2009
    07:52:25
    SQL-END: 04.02.2009 07:52:25 00:00:00
    04.02.2009
    07:52:25
    SQL: 04.02.2009 07:52:25 ACHUY
    04.02.2009
    07:52:25
    CREATE TABLE "/BI0/0100000030" PCTFREE 10
    04.02.2009
    07:52:25
    PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
    04.02.2009
    07:52:25
    STORAGE (INITIAL     0000000016 K NEXT
    04.02.2009
    07:52:25
    0000000000 K MINEXTENTS  0000000001 MAXEXTENTS
    04.02.2009
    07:52:25
    2147483645 PCTINCREASE 0000 FREELISTS   001
    04.02.2009
    07:52:25
    FREELIST GROUPS 01) PARTITION BY RANGE
    04.02.2009
    07:52:25
    ("KEY_0BCS_C10P") ( PARTITION "/BI0/F0BCS_C100"
    04.02.2009
    07:52:25
    VALUES LESS THAN (0) TABLESPACE "PSAPSR3",
    04.02.2009
    07:52:25
    PARTITION "/BI0/F0BCS_C100000000019" VALUES LESS
    04.02.2009
    07:52:25
    THAN (0000000019) TABLESPACE "PSAPSR3", PARTITION
                  |
    04.02.2009
    07:52:25
    "/BI0/F0BCS_C100000000276" VALUES LESS THAN
    04.02.2009
    07:52:25
    (0000000276) TABLESPACE "PSAPSR3", PARTITION
    04.02.2009
    07:52:25
    "/BI0/F0BCS_C100000000277" VALUES LESS THAN
    04.02.2009
    07:52:25
    (0000000277) TABLESPACE "PSAPSR3") AS SELECT *
    04.02.2009
    07:52:25
    FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT
    04.02.2009
    07:52:25
    IN ( SELECT "DIMID" FROM "/BI0/0100000076"
    04.02.2009
    07:52:29
    SQL-END: 04.02.2009 07:52:29 00:00:04
    04.02.2009
    07:52:29
    Error SQL: ORA-14400: inserted partition key does not map to any partition
    04.02.2009
    07:52:29
    Error de sistema: CREATE_TABLE_AS_SELECT/RSDU_EXEC_SQL /BI0/0100000030 14400
    04.02.2009
    07:52:29
    El job ha sido cancelado tras excepción de sistema ERROR_MESSAGE.
    Someone has an idea how to fix this?

    This is the SQL of the insert
    The partition condition of the table is the column ("KEY_0BCS_C10P")
    SELECT * FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM "/BI0/0100000076" )
    This is the info of the /BIO/0100000076 TABLE
    SQL> SELECT "DIMID" FROM sapsr3."/BI0/0100000076";
         DIMID
             6
    SQL>
    And this are the rows that I think are not included in the partitions of the table
      1  SELECT DISTINCT KEY_0BCS_C10P, KEY_0BCS_C101 FROM SAPSR3."/BI0/F0BCS_C10"
      2  WHERE KEY_0BCS_C10P > 277
      3* AND "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM SAPSR3."/BI0/0100000076" )
    SQL> /
    KEY_0BCS_C10P KEY_0BCS_C101
              284             4
              285             4
              293             3
              292             4
              293             4
              293             5
              285             3
              290             4
              292             5
              283             4
              285             5
    KEY_0BCS_C10P KEY_0BCS_C101
              291             5
              292             3
              291             4
    14 rows selected.
    SQL>

  • RA-14400: inserted partition key does not map to any partition

    Our repository tablespace filledup alll 40GB allocated and over the weekend we stopped OMS agenets and ran the package for partition maintenance.
    exec emd_maint_util.partition_maintenance;
    Now after starting OMS, all xml files are gettting moved errors directory and following error is getting reported in the emoms.trc file. Any idea how to add these partitions. Not much help in metalink. One of the note says try running "exec emd_loader.rollup(); ". THis is for 10GR1 grid conrol. I am running 10gR2 and reopositiry database 10.1.0.5
    ==========>
    at oracle.sysman.emdrep.dbjava.loader.XMLLoader.run(XMLLoader.java:1304)
    at java.lang.Thread.run(Thread.java:534)
    2007-05-04 15:35:35,312 [XMLLoader0 90000003561.xml] WARN eml.XMLLoader LoadFiles.672 - Marking the file for retry : 90000003561.xml after receiving exceptionjava.sql.SQLException: ORA-14400: inserted partition key does not map to any partition
    <========

    I think emd_loader.rollup is part of the
    emd_maintenance.analyze_emd_schema('SYSMAN') package. Let me try this.

  • RH7- Insert action does not display window to select the file.

    I have a nightmare situation with RH7 with no clue to resolve. What are my options to fix this
    I am having trouble with robohelp, selecting insert action does not display the pop up window. This prevents functions such as inserting images & files, importing files and creating hyperlinks to documents created in word, frame maker.
    when I perform this action, the pop up window appears virtually but is not visible to make the selection and RH freezes.
    I have to end the process or press esc to find some work around - so far none available
    Please help.

    Welcome to the community.
    Have you recently gone from a dual monitor setup to a single monitor?  When this happens, RH can sometimes keep tossing dialog boxes over where it thinks the second monitor is.  I typically use a program called ForceWindowVisible (get it here) to push wandering dialogs back into view.  Give that a try and see if it works.  Hope this helps,
    Ben
    GryphonMountain.net

  • GP Card manager Key does not changed..

    hi all..
    I have a jcop card and I want to change the GP Caard Manager Key from Static 40~4F to 30~3F.
    Now the key version is 01.
    Like below..I succeed putkey cmd, but the key does not changed..
    What is the probem???
    [Power On - Gemplus USB Smart Card Reader 0]
    ATR : 3B 69 00 00 4A 43 4F 50 33 31 56 32 32
    [APDU - Gemplus USB Smart Card Reader 0]
    00 A4 04 00 08 A0 00 00 00 03 00 00 00 << 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65
    01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A
    86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B
    02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64
    0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09
    2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01
    04 01 2A 02 6E 01 02 90 00
    172ms
    [APDU - Gemplus USB Smart Card Reader 0]
    80 50 00 00 08 00 00 00 00 00 00 00 00 << 00 00 93 02 04 37 90 91 54 50 01 02 00 2C BE 39
    5E A5 07 55 D3 74 FF 65 DA B6 1C 0E 90 00
    125ms
    [APDU - Gemplus USB Smart Card Reader 0]
    84 82 00 00 10 78 E9 4A 72 8C 8A 58 C2 9C 60 70 A3 C9 F2 93 48
    << 90 00
    78ms
    [APDU - Gemplus USB Smart Card Reader 0]
    80 D8 01 81 43 00 80 10 D3 DD 37 F4 45 C0 EB C8 20 A9 7F 43 FB D6 61 A8 03 B7 3D 56 80 10 D3 DD
    37 F4 45 C0 EB C8 20 A9 7F 43 FB D6 61 A8 03 B7
    3D 56 80 10 D3 DD 37 F4 45 C0 EB C8 20 A9 7F 43
    FB D6 61 A8 03 B7 3D 56
    << 01 B7 3D 56 B7 3D 56 B7 3D 56 90 00
    203ms

    The only way that OneKey would be restored in your situation is by having Lenovo reimage your hard drive. Assuming they will do it under warranty. Once you repartition drive "C", you lose all functionality of OneKey partition. I was going to suggest that you extract the recovery image from the hidden partition but even that will be useless because the image was set up for the original partition setup.
    An alternative, is to use an OEM Windows XP [Greek] to install with the COA on the netbook, install the drivers and software that was preinstalled [from Lenovo] and create a recovery cd/dvd using OneKey 6.0 and VirtualCD.
    ***VirtualCD is a program that allows you to burn CDs and DVDs using a virtual CD/DVD writer.
    Message Edited by ortegaluis on 01-15-2009 09:13 AM
    \\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

  • New Apple Keyboard Launchpad F4 key does not work

    New Apple Keyboard Launchpad F4 key does not work
    Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
    Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
    Maybe someone can help me!!
    Thank you
    greeting

    Hi,
         Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
    - Quit System Preferences (if open)
    - Delete this document to remove a carry-over mapping error.
    - Then logout
    Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
    Note2: This document is in your users preferences folder.
    ~/Library/Preferences/com.apple.symbolichotkeys.plist
    -Alan

  • My Media Keys are not functioning with iTunes 10.6.1...

    My Media Keys are not functioning with iTunes 10.6.1... As i said
    Keyboard: Microsoft Digital Media Keyboard 3000
    I've actually had this issue since like what, 10.4? I've tried that dll fix thing and that does nothing. Any help out there so I can play my music without having to leave the micro player popped up all the time?

    And included on the retail sales box.
    http://www.apple.com/iphone/specs.html
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.itunes.com/download)

  • Object referred to by the object key, does not exist

    I am trying to create a transport request for an Item Catagory & get the following error message :
    Object R3TR TABU TVAPT, referred to by the object key, does not exist                                                                               
    Message no. TR600                                                                               
    Diagnosis            
        The object keys of the request/task cannot be edited because the object R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request.                                                                               
    System Response
        The function terminates.                                                                               
    Procedure                   
        If the error occurs in an application transaction, extend the missing object entry in the Transport organizer (SE09). If the error occurs again, contact the application hotline.

    Hi Nitin,
    Please check this SAP Note <b>90799</b>.
    Perhaps it will help.
    Regards,
    Ferry Lianto

  • HT4241 The headset jack does not function at all.

    I have a MBP 13" running os x lion 10.7.4. The headset jack does not function at all. I can hear crackling in the headphones but not acual sound. I have attempted the the PRAM reset but I guess my timing is off because I keep running into the boot menu. I have a pair of Dre. Pro's that I am using and work fine on everything else I own. Thanks for the help

    Hi y,
    There is a switch inside the audio jack that may be stuck. Try gently inserting an audio plug, gently wiggling it, and then removing the audio plug.

  • My down arrow key does not work as it should

    Hello to you.
    My down arrow key does not work as it should.
    When I use my down arrow key is the whole side going down.
    It is annoying when you write that you always end up bottom of the page when using the Down arrow key. I hope I can help me
    I use Windows Vista.
    Yours faithfully
    Anders Lodberg

    Check if you enabled scroll lock (fn + insert), in excel it scrolls page when enabled and move across cells when disabled
    3000 N200 0769-AL3, Intel C2D 2G T5750, IEL10 mb, Kingston 4G RAM, Samsung 320G HD, Broadcom lan 100, Agere modem 56k, Broadcom wifi g, AuthenTec fingerprint reader, Sonix 1.3M camera, LG DVD burner, Samsung 15,4" 1280x800 BrightView, Intel X3100 IGD 384M, Ricoh 5in1, Ricoh 1394, vista home premium sp2

  • In my newly purchased MacBook Air, Dropbox does not function properly. It asks for Mac OS Password for my computer which I do not have.

    In my newly purchased MacBook Air, Dropbox does not function properly (it shows MS Word, Excell and Power Point docs but not pictures). It asks for Mac OS Password for my computer which I do not have. How should I get this password ?

    If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
    Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

  • Error while connecting to ATE DecryptPasswordError "Key does not exist",,,

    Dear All,
    While trying to implement Syclo Service Manager with SAP CRM , I am trying to start the ATE (Agentry Test environment) on Windows after getting connected to the development server. However, I am getting the below error after I give my user ID and password on ATE login pop-up.
    DecryptPasswordError <"Key does not exist",,,>
    It initially says that the password is incorrect and asks if we would like to connect to the server instead. When I click on "Connect", the above mentioned error is displayed.
    Can you please help me with this. As a matter of fact, in the past, I have been able to connect to ATE without any issues, but not sure what could be the problem this time.
    Any quick help is highly appreciated.
    Regards,
    Ashish Dhagat
    Tags edited by: Michael Appleby

    Hi Ashish
    Without seeing the rest of the logs, I'm assuming you are getting some kind of logon error.
    If so, this error can happen if the the Agentry Server fails to load the "cryptography context and key container".  This can be found by viewing the Startup.log files located in the LOG folder in the running Agentry Server folder.
    The following is an example of the Startup.log:
         05/05/2009 12:50:55, 0, 0, 2, Thr 2120, Key container does not exist, attempting to create a key container.
         05/05/200912:51:02, 0, 0, 2, Thr 2120, Failed to acquire cryptography context and key container. 05/05/2009 12:51:02, 0, 0, 2,
         Thr 2120, Error 2148073487 loading cryptography key
    This issue is caused by the User that started the AgentryServer.gui (or LOCAL SYSTEM if running as a Service) which means the user does not have access to the MachineKeys folder.  The user needs to have full access to the following folder:
                   C:\Documents and Settings\All Users\Application Data\Microsoft\Crypto\RSA\MachineKeys.
    If running as a Service, the user should confirm the logon account.
    To change the Logon account from Local System Account to 'This Account' option (needs to be an admin account):
    Go to Control Panel->Administrative Tools->Services.
    Right click on the appropriate service and select 'Properties'
    Select the tab 'Log on'.
    Click the radio button next to 'This account'
    In the field next to 'This Account', enter ID used for logging into Windows (admin account)
    In the Password and Confirm Password fields, enter password associated with the Windows login ID
    After verifying that the user has full access to the folder, restart the Agentry Server, and with a cleared client, connect to the Server.
    Let me know if this helps.
    Thanks,
    Ray

  • Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

    pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

    Dear Valued Pioneer Customer:
    We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device.  If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
    This firmware update may be used only with the following 2012 Pioneer products:
    CD Receivers
    DVD Receivers
    DEH-P8400BH
    DEH-P9400BH
    DEH-80PRS
    AVH-P2400BT
    AVH-P3400BH
    AVH-P4400BH
    AVH-P8400BH
    In order to perform this update, the following items are needed:
    A Pioneer CD or DVD Receiver above with built-in Bluetooth
    Laptop with built-in Bluetooth running Windows® 7
    Bluetooth firmware update (HW05-SW01.27.20)
    How to Obtain the Free Firmware Update
    1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
    2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
    You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
    How to Determine if the Firware Update has Already been Installed
    CD Receivers:
    • With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
    DVD Receivers:
    • With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
    If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
    Questions
    If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
    Sincerely,
    Pioneer Electronics (USA) Inc.

Maybe you are looking for