Insert Mode or Update Mode

Hello,
In my form I have a component list. He calls another form. Calling this form is in insert mode or update mode. How can I do this?
In the insert mode is showing the error:
ORA-01403: no data found Error Unable to fetch row.
How can I do that if the record does not exist, it change to insert mode?
Thank you all.
Marcelo

If you built the form using the create form wizard, you should not need to tell it whether you are expecting to insert or update - we do that for you.
If you built your own, you will need to add a condition to your fetch so that it only fires if you primary key column was passed in (that is what typically signifies an update). You will need the same on the processing to identify whether to run your insert or update procedure (ditto for your buttons, you don't want to display Delete when a user is inserting).
Even if you did build your own, you might want to create a form using a wizard and inspect what gets created for you so that you can see how it works and then replicate on your page.
-- Sharon

Similar Messages

  • Importing ODI Procedure in Insert/Insert-Update mode

    Can we import an ODI procedure from one project to another in INSERT or INSERT-UPDATE mode?
    We are getting xml import error while doing this. But when we do the import in DUPLICATION mode, it successfully does so.
    The issue is that we have an ODI procedure in INT environment which is been used by several other packages. We changed the code of it in our DEV environment and when we tried to import it in INT environment through INSERT-UPDATE mode so that the the changes gets effected, we got error.
    This is quite obvious that the folder/sub-folder IDs are different in both environment and this is causing trouble.
    So, is there any other way, we can reflect the change in the INT environment with minimum effort? I mean, we don't want to import it in DUPLICATION mode....if we do so, we will have to re-map that procedure in all the packages and regenerate them.

    You can use variable to replace the value at runtime in the query but you need to either pass the variable value at startup or you can refresh variable value. But I dont think you can directly retrieve any topology setting as the variable value to be substituted in the query.

  • How to use a single page for create and update mode.

    Hi,
    I need to develop a single page to be used for both create and update modes.
    I am going to use a variable MODE
    and i will set this in the emp summary page.
    Based on the button clicked by the user i have to render the JSF page.
    For tis if the user selects a perticular and cliks on update thn i will pass the empno to the next.
    so there in the next i will appy a ViewCreiteria on my View Obj to fetch only that row so that only that emp will be displayed ion update mode.
    This is working fione for me.
    So now the issue is
    when the user clicks on CreatEmp button.
    i need to enable my VO for insert operations.
    for this i wrote the code like this in the beforePhase event
    FacesContext ctx = FacesContext.getCurrentInstance();
    ValueBinding valBinding = ctx.getApplication().createValueBinding("#{data}");
    BindingContext bContext = (BindingContext) valBinding.getValue(ctx);
    DCDataControl dcControl = bContext.findDataControl("DataControl");
    Application app = ctx.getApplication();
    ApplicationModule am = (ApplicationModule) dcControl.getDataProvider();
    System.out.println("After Appmodule initiation");
    // get the VO reference and initiate the query
    System.out.println("Before Page VO initiation");
    PrismDmPageSectionViewImpl vo = (ViewImpl)am.findViewObject("View");
    //ViewRowImpl row = (ViewRowImpl) vo.createRow();
    /* TO CREATE AN EMPTY ROW*/
    Row row=vo.createRow();
    System.out.println("New Row is created");
    //vo.createKey(row);
    vo.insertRow(row);
    vo.setCurrentRow(row);
    By doing this a new empty page is rendered.
    But when i fill up the values and click on ok.. i am getting the error like this..
    JBO-27023: Failed to validate all rows in a transaction.
    JBO-27027: Missing mandatory attributes for a row with key null of type View3
    JBO-27014: Attribute Id in View3 is required
    JBO-27014: Attribute PageeId in View3 is required
    Please point me out where i am missing.
    Thanks

    Hi,
    In my opinion you are over complicating things.
    This is what I do for using the sme page as both create and update without all this code.
    1) Create a browse page containing a an adf table with a select one component bound to your view object.
    2) Create an additional edit page containing only an edit form containing fields of your view object that your users must enter in order to add or edit rows.
    3) Link the pages in the JSF diagram with an "edit" navigation case from browse to edit page and a "return" navigation case from edit to browse (make sure that redirect option is NOT set on both cases)
    4) Remove the submit button from the edit page and add two application module bindings for the commit and rollback operations as command buttons in the form footer facet. Make sure that both buttons has an action of return and that their disabled property is set to false. You will probably change their labels to ok and cancel respectively.
    5) Drop a create action for your view object from the data control palette inside your page as a command button and set the action property to edit also.
    3) Set the action property of the view button to edit
    This should basically work without any code from your part. -- at least it does so for me -- if you like to make it a bit more funcy you may add am action listener inside your buttons and set a requeScope variable for example #{requestScope.editing} to true or false depending on the button clicked. Then add a title to your page with a value like #{requestScope.editing == true ? 'Editing record' : 'Adding a new record'}..
    Hope that helps.
    Thanassis

  • Report to Form (in Update mode), update, "Close" back to report (just like QBE).

    Alright, I have been through the entire board and found bit and pieces here and there on how to do this, but I am not satisfied with the results. Answers to these questions will dictate whether we use this product or not.
    1) The QBE solution is great for the above EXCEPT I am unable (it seems) to make updates to the form portion of the Report/Form combination. I need to be able to lock off certain fields and disallow certain functions. Other's have asked whether this can be done. No answers issued forth.
    Is there some way short of hacking into the PL/SQL code of updating the form on a wizard created QBE?
    2) I was able to create my own report, link (via link object) to a custom form (update the form as I needed). Now I would like my users not to have to hit the query button (which is absurd in this case because they already have the proper record displayed). So I need to open the form in "update" mode. I have seen some different approaches to this on the board, and all kinds of code, but is there a simple way to do this (preferably from the tool, not hacking code)?
    I see the code in the various posting (including the FAQ), the question is where I put in in the context of my link from report to form (if it is in the native pl/sql, this is not an answer because we will not go that route; having code blown away by the tool and have to be reentered. It goes in in the context of the tool or we don't use the tool).
    Also, is there a way to utilize the "close" button from the QBE that so nicely takes you back to the report and does a refresh?
    This is the simplest app I could dream up to test this product and it looks like it falls short.
    In summation:
    1) Generate a report. (yes)
    2) Link to form (yes)
    2a) Link direct to record (no query click) (no, without hacking)
    3) update the form (yes, if after query click)
    4) Jump back to report at spot where you left, do automatic refresh (just like QBE) (No, without hacking)
    Again, this is the simplest and most common of apps, I cannot understand why it would be so hard to accomplish. What am I missing? Anybody on the board, please advise.
    null

    If your report is created using ‘Reports From SQL Query’ then you can modify it using the following to achieve this:
    1. Remove the link from ‘Column Formatting’ section of the report object.
    2. In the SQL of the report , use custom link to the column where you want to provide link using the syntax
    select a.empno,’‘||a.ename||’‘ ename_link,a.deptno
    from scott.emp a
    Order by a.empno
    and the form will always open in ‘INSERT’ mode with passed values filled in.
    Thanks
    Krishnamurthy

  • FM in Update Mode

    Dear All,
    Can anyone tell me about, what is the use of craeting Function Module in Update Mode?
    Thanks in advance.
    Kind Regards,
    Prasad

    Hi,
    1.if you want to use committ work or roll back ,then go for update mode.
    2.Calling a FM in Update Task is one of the bundling techniques used in ABAP to avail functionality provided by SAP Update System. Here all database updates are processed at the end of the SAP LUW in contrast to normal FM call where the database updates are done and commited at the time of call (Database LUW). It is necessary to bundle all your database updates in an SAP LUW e.g. all database updates in a transaction (like VA01) should be bundled. Almost all standard SAP transactions use bundling techniques.
    This technique separates the dialog process and update process. The dialog part of the transaction can span more than one screen(one dialog step) and can be processsed by more than one dialog work process. A work process is released when the dialog step changes (screen changes) and the work process sends a database commit (called Implicit Database LUW). So with each screen change there is a database commit and database remains in consistent state.
    Now when using bundling technique, when a COMMIT WORK is encountered, system ends the dialog process with a dialog work porcess and starts the update process using an update work process.
    The dialog step containing the COMMIT WORK is considerd as the last dialog step of the transaction and all the update function modules are processed now in the last dialog step by the update work process though they were called earlier during the earlier dialog steps.
    It is necessary to create update FMs to take advantage of this technique. The update FM is created FM by setting the Update moduleradiobutton in the Attributes tab in SE37.
    In a normal FM call, if there are database updates (UPDATE, INSERT, MODIFY, DELETE) than database is commited after the FM processing is over as the FM starts its own Database LUW and ends it too.
    Regards,
    Shiva.

  • Lock records when in Update Mode / problem with 2 users on 1 document

    Hi,
    when user A updates e.g. a purchase order and user B goes into this purchase order and updates e.g. the remark before user A, then user A cannot save his changes. Imagine user A has put in several new lines and has made several price adjustments, his work will be gone.
    In most cases this should not happen very often, but it could. Since B1 recognizes when another user has updated the document before, it should be possible to solve this situation more convenient (either by lock, saving to a new document, comparing to the old version, etc).
    Thank you
    Sebastian

    Hi Sebastian,
    Your request is understandable. It may not have big problem to change current process by coding. However to lock records whenever in update mode, that could create too many locks. It is basically not good for performance. The trade off may be allowing save as function. However, this may not be a desirable solution for most end users.
    Thanks,
    Gordon

  • Master Data loading got failed: error "Update mode R is not supported by th

    Hello Experts,
    I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
    For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
    "Update mode R is not supported by the extraction API"
    Can anyone tell me what is that error for? how to resolve this issue?
    Regards,
    Nirav

    Hi
    Update mode R error will come in the below case
    You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
    This time the load will fail with update mode R.
    As repeat delta is not supported.
    So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
    example your fiorst delta failed with replication issue.
    only replicating and repeaing will not solve the update mode R.
    you will have to do both replication of the data source and re-int for the update mode R.
    One more thing I would like to add is.
    If the the delat which failed with error the first time(not update mode R), then
    you have to do init with data transfer
    if it failed without picking any records,
    then do init without data transfer.
    Hope this helps
    Regards
    Shilpa
    Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

  • ERROR: Update mode C is not supported by the extraction API - R3 11

    Hi gurus,
    I just tryed to implement the solution I found at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
    The data source is based on an Infoset on the KONV R/3 Table.
    I setted the AIM delta process and I did all the activities as written in the document.
    The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
    The "initialize delta process" (with data) doesen't work and returns the following error:
    Update mode C is not supported by the extraction API
    the error code is R3 11.
    have you any idea about it???
    Thanks!!!
    Regards!
    Matteo

    Hi,
    for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
    Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
    regards
    Siggi

  • Iphone 6 plus struck in recovery mode after update to 8.1

    iphone 6 plus struck in recovery mode after update to 8.1
    i updated my iphone 6 plus to 8.1 from 8.0.1 and its struck in recovery mode.  inspite of restoring it again and again i get error 53.. im struck in the recovery loo. kindly help me..

    Hello arunmuthuvel,
    The article linked below details a whole host of information and a number of troubleshooting steps that can help get your iPhone restored.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/en-us/HT201210
    Cheers,
    Allen

  • Changing update mode in Error DTP

    Hi Gurus,
    I have some issues with data in PSA. I am trying to solve it using Error DTP.
    While Executing DTP one record failed to load giving bad request. Now i created an error DTP. By default the extraction mode is Delta.
    DTP extraction Mode->Full
    Error DTP Extraction Mode -> Delta; How can i make it full. If i amm trying to change it, The option is disabled.
    Thanks in advance!
    Regards
    Anu

    Hi Anu,
    In my system original DTP is full and when i create error DTP, i got error DTP extraction mode is full.
    Yes you are right, it is disabled.can you check the update mode of your original DTP once.
    once the error DTP is created, we can not change the update of it.
    Regards,
    Venkatesh.

  • I have updated to IOS 6, the App store won't work, is stuck in update mode for 1 day and the battery now goes flat in 3 hrs without use. Can I go back to IOS 5?

    Hi, I was forced to upgrade to IOS 6 due to a restore.
    Since the upgrade, I have lost information, the App store is stuck in update mode, my battery drains in hours and many more problems.
    Is there a way to go back to the VERY RELIABLE IOS 5? This phone is nearly useless now.
    Thanks

    Just FYI - the situation is resolved.  I downloaded the new snow leopard 10.6.8 update for safari and now itunes works.  I have no idea what that has to do with anything - but I saw it on another forum and it actually worked.

  • Segment E1PITYP occurs for each subtype of Infotype 1001 in update mode

    Hi,
    I am using transaction PFAL and IDoc HRMD_A for transferring HR data.
    In update mode the resulting IDoc contains segment E1PITYP for each subtyp (for example A002) of Infotype 1001 even if it contains no segments of type E1P1001.
    Could somebody explain this and is it possible to avoid this behavior?
    Thanks and regards
    Patrick

    Hi,
    thanks for your answer.
    Still I am little bit confused and want give an more detailed description of my problem.
    If I export an organizational unit in initial mode I have for example 5 segments of type E1PITYP and each of them has a subsegment (for example E1P1001).
    Export of the same organizational unit in update mode results in more than 200 segments of type E1PITYP and all of them without subsegment.
    This seems to happen for all infotypes (not only 1001 like I thought before).
    Now I want to understand why this happens and if it's possible to update an organizational unit without segments of type E1PITYP that don't have a subsegment.
    Regards
    Patrick

  • How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating to iOS 8.0.2?

    How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating from iOS 8.0.1 to iOS 8.0.2?

    In you case, the only way is to use data recovery app to get back your lost photos, so the chance is uncertain. It depends on how smart the app it's. The good news is that most of the apps allow you to try them out. You can test them out by yourself. The steps are:
    Install data recovery app on your computer
    connect your iPhone and allow the app scan iphone
    display scanning result
    choose local folder to store recovered items
    You can choose to recover your photos from local disk, iTunes backup or icloud.  More details can be found out here.

  • How to capture the change in the update mode (for Inventory) in a transport

    Hi all,
    I recently changed the update mode for Inventory Controlling  from Unserialized V3 Update to Queued delta in R/3 DEV environment. When I was doing the change it did not prompt for a transport request. Now I have to somehow capture this in a transport and move it to R/3 Quality environment. How do I capture this change in a transport.
    Thanks in advance,
    Ram Kumar.

    there are 2 options
    1) try changing back and forth and see if it prompts for a request
    2) Create a customizing request and add the following entry into the request
    Program ID - R3TR; Object type - TABU; Object name -  TMCEXUPD
    and make the entry ...How ?? Click on the key that you see under the column 'Function'
    client/application component.. if client is 100 and application component is 11
    then the table entry should be 10011
    Assign points if it helps
    P.S:if you check the table TMCEXUPD shows you the update mode
    Edited by: KK on May 28, 2008 1:52 PM

  • How to identify update mode in function module for generic extractor

    Hi All,
    I have created generic extractor using function module which supports delta load.
    Delta logic is handeled in coding...by using ROOSGENDLM table.
    Now problem is we need to identify the update mode, requested from infopackage in our function module in order to apply logic for Repair full.
    I would like to know table or parameter in source system, which contain the update mode (Init , Delta , Full).
    Thanks,
    Niraj

    Hi Niraj
    You can use the FM import parameter "i_updmode" (This is of type "SBIWA_S_INTERFACE-UPDMODE") to determine if infopackage triggerred in full or delta mode.
    I_REQUNR     TYPE     SBIWA_S_INTERFACE-REQUNR                                                                               
    I_ISOURCE     TYPE     SBIWA_S_INTERFACE-ISOURCE                               InfoSource Name
    I_MAXSIZE     TYPE     SBIWA_S_INTERFACE-MAXSIZE                               Data Packet size
    I_INITFLAG     TYPE     SBIWA_S_INTERFACE-INITFLAG                               Initial Flag
    I_UPDMODE     TYPE     SBIWA_S_INTERFACE-UPDMODE                               Update Mode
    I_DATAPAKID     TYPE     SBIWA_S_INTERFACE-DATAPAKID                               Datapacket Id
    I_PRIVATE_MODE                                                                               
    I_CALLMODE     TYPE     ROARCHD200-CALLMODE                               Single-Character Flag
    I_REMOTE_CALL     TYPE     SBIWA_FLAG                                                                               
    Cheers
    Vasu Sattenapalli

Maybe you are looking for