Insert new tab at front of Tab Set Container

In Xcelsius 2008, I have an existing Tab Set Container with four tabs.
Based on user feedback, I need to add an additional tab at the front/first position of the previously created tabs. I can click on the first existing tab and insert, but the "new" tab is in the "second" position and I cannot seem to move it.
Is there a capability I'm missing that allows me to order the tabs in the Tab Set or re-order to my custom preferences?
Or am I going to have to start from scratch?

Hi Brent,
To get the new tab added on the first position, add the tab as you are doing.
Then go to the object browser,expand the TAB SET.
Select the tab which you want to set on first or any position and then use the "UP/DOWN-Arrow mark" present at the bottom of the Object browser window.
This will enable you to move the tab to any location you want.
Thanks,
Amit Mathur.
Edited by: Amit Mathur on Dec 30, 2008 9:05 PM

Similar Messages

"open a new tab" buttton on the toolbar does not insert new tab after current

I want the open a new tab button at the right end of the tab bar to open a new tab after the currently open tab the same way the browser does when the browser.tabs.insertRelatedAfterCurrent profile option is set to true.
This current behavior is VERY annoying as I always have many tabs open and then have to scroll all the way to the right of the tab bar and drag the new tab back to where I want it, which is always following the currently active tab.
Not sure if this was ever supported but if not I used to run Tabberwoky which no longer works and I've become quite fond of the feature and I need to make Firefox 8 do this.
Please tell me how, not that I can't or should do it some other way.
Thanks.

That did it! Sure saves me trying to figure out how to write an extension to do it but if there is a simple example similar to my request that the source code is available for so I can take a look at it to see how its done the link to it would be appreciated.
Thanks for the help!

When clicking the + tab in the tab bar how do I set new tabs to automatically open my home page

When clicking the + tab in the tab bar how do I set new tabs to automatically open my home page

You can do that by using an add-on such as:
* NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
* New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
Another way of opening the home page in a new tab is to middle click on the home button in the navigation toolbar.

I am trying to set up app tabs, but when I am using one, if I go to a new site from there, the app tab changes to the new site instead of opening in a new tab, then the app tab changes to the new site. Can you help? Thanks

I am trying to set up app tabs, but when I am using one, if I go to a new site from there, the app tab changes to the new site instead of opening in a new tab, then the app tab changes to the new site. i.e. The app tabs don't stay constant. This occurs while still in Firefox, and does not relate to when I close it. Has anyone got any ideas? Thanks

If you backed up the iPhone to either iTunes or the iCloud, restore the backup. If not, the data is gone.
(126342)

New websites do not open in their own tab when left-clicked, despite setting up Firfox to do so - links OK however

From the Google search results , if I left-click a site, firefox does not open new site in a new tab. I have accessed tools/options/tabs and the ticked the box to open new windows in their own tab.

Use Ctrl left click
* or right click and use open in new tab
The open in tab option you have selected is for where the action would otherwise open a new window.

In creating a fillable PDF in XI Pro, can I insert a table which can be tabbed through?

In creating a fillable PDF in XI Pro, can I insert a table which can be tabbed through?

You're in luck. Create the first field and then right-click it (in Form Edit mode) and select Create Multiple Copies. You'll be able to specify how many copies of the fields to generate, and at what intervals. The nice thing is that although the properties of the new fields will be identical to the source one, they'll each have a unique name, so you'll get an instant "table" of fields.

How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?

I have 5 of them all containing nested Apdiv within nested ApDivs (a long storie ) that I would like to insert into 5 tabs in the Spry Tabbed Panel.
Please help.

"Hi Gramp,I realize I have made hard work for myself but I really don't know any better. I also realize now that taking on this project may have been a mistake :-)I taught myself how to use the design side of Dream Weaver. These five ApDivs were created in the content area of the spry tool and it worked fine. (yes a lot of work though)For the first time I looked at the code side. I wanted to try to bring a peace of code from another page for something unrelated and when it didn't work I took it out and without noticing, deleting a line from the Spry tool.Of course like a classic newbe I was working without a backup copy so here I am. Loosing hours of tedious work and on the verve of tears :-)I do have some questions though. My APDiv
What does "apDiv1" stands for and what does "My APDiv" stands for?Is the only thing I have to do is changing this line for my five ApDivs and paste it in the appropriate places in the code? Thanks again,Gilaad
Date: Sat, 16 Jun 2012 20:39:07 -0600
From: [email protected]
To: [email protected]
Subject: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    Re: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    created by Altruistic Gramps in Spry Framework for Ajax - View the full discussion
You have really made hard work for yourself by using APDiv's. I suppose it can be done, but I would not. To answer your question, I have create an example as per#apDiv1
My APDiv
Content 2
Tab 1
Gramps
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4498679#4498679
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4498679#4498679. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Spry Framework for Ajax by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

In FF 7.0.1, the New Tab button on the Tab Strip disappeared after clicking the Tab Group icon and trying to return, so I'm looking for advice on how to get the New Tab to reappear on the Tab Strip.

In Windows Vista, FF 7.0.1, I selected the Tab Group button to try it out. However, when I selected the Tab Group button again to close that view, the New Tab button in the Tab Strip no longer appears. I'm requesting help to restore the New Tab button (has the "+" sign on it) on the Tab Strip just to the right of the currently open tabs.

You can find the New Tab button showing as a '+' on the Tab bar.
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions. 
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it.

Dragging an existing tab to the desktop (or below tab bar) does not open that URL in a new window, only a new window with an empty tab. FF4 RC2 (did it with RC1 as well).

When I drag an existing open tab from the FF4 tab bar onto my desktop, a new window opens as expected but the tab within that window does not load the URL of the tab dragged from the previous window. The tab menu item "Move to New Window" does the same thing as well.
I have disabled Tab Mix Plus add-on but it has made no difference. Is there a setting somewhere that I am missing?

I use Tab Mix Plus and do not have that problem.
 
You may need to try Firefox Safe Mode to see if an add-on is causing the problem; see: http://kb.mozillazine.org/Safe_Mode
*In Firefox 4, to enter Safe Mode, hold the Shift key while clicking on the Firefox 4 desktop icon.
*Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
* If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
* See the following for more information
** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

How do I set the Home Page for a newly open tab using the File Tab Menu??

When I open a new tab, is there a way to set the home page the new tab will use when it is opened, or will new tabs always be opened as blank pages?

I have new windows opening when I click on a link. Or when I click on the FF-Icon. New windows are the default setting.
When a new window opens, I get a Google home page and can instantly type in a search phrase.
With the above in mind, sometimes I want to keep search classes in the same window. In a sense I'm using the Window with no tabs, to generate a tab by using the File Tab option.
When a Tab is selected where new windows will launch a new page, and not a new tab, the process of forcing a new tab onto the window will produce a tab page that is Blank, and the new tab label description displayed in the tab area shows the words "New Tab". That tab's URL address bar is blank. Zip - nothing displayed.
When a blank page tab appears, I click on the HOME button you helped me remodel, and the "New Tab" description in the tab label area changes from "New Tab" to "Google".
My question was to ask, if there was a way I could do something to make FF4 do that Home page assignment on its own. In the early FF days I found you could sometimes go into the bowels of FF, find some form of INI or SETTINGS type file, look for a Keyword reference that would tell FF to do something different, and Viola, emotional issue resolved. In this case, I'm trying to "Gild the Lilly" by asking if you, or someone else might have a rabbit they can pull out of their hat, just like you did when you helped me move my Home button, and have that rabbit show me how to do something that default FF-Options section doesn't support.
Did I do a better job of explaining the issue this time?
Thanks again for the response.
When I

How can i have bookmarks automatically in a new tab rather than the tab i am in when i select a bookmark?

How can I get book marks to automatically open in a new tab rather than the tab I am in when I select the bookmark?

It would be good if this was made a user-defined Option (Tools -> Options -> Tabs) in the next update of Firefox rather than having to install an add-on. I currently keep Firefox open to view my Accuweather.com add-on running or because I know that I will be returning to Firefox in short order. (I do close Firefox if I have visited a sensitive or secure site to ensure better security.) Every time I want to go to a bookmark, I must open a new "(Untitled)" tab before selecting my bookmark using the keyboard (I'm a dedicated keystroker; it's much faster for me). This way, when I close the website, I have an "(Untitled)" tab displaying so that Firefox doesn't close. Why can't I set an Option parameter that will result in me not having to go through this? Alternatively, allow users to set an option to keep Firefox loaded and open in the event only one tab is open and maybe if only one Firefox application window is running (I avoid having more than one Firefox window open as much as possible). I've addressed this last issue in the past but have seen no change when one closes the last tab in a Firefox window. As general practice, I would think that Firefox would run better if options, like I have described above, were part of the Firefox application code and not given to needing an add-on which may cause instability in Firefox as they have in the past, even with author verification and certification.

F.F will not set tabs in the tab bar, always one tab in the L/H corner. one moment it will then it wont. OS is Win 7 Ult

Have set the tabs under options clicking the first 3 items. I was getting the tab bar to work with these settings but suddenly now every new page is under one tab. FF seems to be very unstable under Win 7 Ult. Its OK under Win XP sp3 Home.
== This happened ==
Every time Firefox opened

http://support.mozilla.com/en-US/kb/Safe+Mode
As a solution for your problem (now I understand it), you can:
- middle click links to open them in new tabs;
- right click links and select "Open Link in New Tab" to open them in new tabs;
- open a new tab prior to opening a new link or doing a search or typing something new in the location bar
- press ALT+ENTER instead of ENTER when you type something in the location bar or search bar to open the result in a new tab
- go into Tools > Options > Tabs to configure Firefox to open new links wherever you like.
Hopefully this is the answer you're looking for.

Two problems with tabs: (1) no "x" to close; and (2) unable to open new tab adjacent to current tab

I don't know if this is a change in how Firefox works, a glitch in my download, or an improper setting, but my tabs don't have an "x" on them to close.
Also, tabs now open at the end of the list rather than in the adjacent window as the did recently. Is there any way to switch this back so new tabs open adjacent to the current tab?

You can reset the tab prefs on the about:config page in case they have been changed.
* browser.tabs.insertRelatedAfterCurrent
* browser.tabs.closeButtons
If you want a close X on the first tab if only one tab is open then set browser.tabs.closeWindowWithLastTab to false.
* http://kb.mozillazine.org/about:config
* http://kb.mozillazine.org/Resetting_preferences
If you have tab related extensions then check their settings (Options).
* Tools > Add-ons > Extensions

When I click on "New Page" I get 135 tabs loaded from a bookmark file

How do I stop this from happening?
Kurt

Do you mean the New Tab (+) button on the Tab bar or the Home page or otherwise?
See this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
You can check the home page setting:
*Tools > Options > General > Startup: Home page
Firefox supports multiple home pages separated by '|' (pipe) symbols.
*https://support.mozilla.org/kb/How+to+set+the+home+page

Can we add new logical system in Entitlement tab in SAP Authentication.

Hi ,
We already Installed and configured sap integration kit and every thing works fine. My question is as of now we connected our sap BW Dev system to BOBJ but we would like to connect to BW Prod System to same BOBJ System. What are the steps we need to follow to do this.
Can we just add the new logical system in entitlement tab of sap authentication in BOBJ 3.1? and import the roles and login to BOBJ USING THE Newly added SYSTEM Credentials. Thanks in Advance.
Thanks,
SK.

Hi Ingo,
Thanks for the information.
Are there any specific steps you need to follow when you are adding one more system to sap authentication. can you please give the steps we need to follow to setup this in right way. Thanks in advance.
Is there any thing we need to configure on sap side other than sap logon ticket parametre. If you can please provide the steps it will be great. Thankyou very much In advance.
Thanks,
SK.
Edited by: Vallabhaneni SK on Jul 14, 2009 8:53 AM

Insert new tab at front of Tab Set Container

Similar Messages

Maybe you are looking for