Insert not working in forms 6i

Hi
I have a non database block in forms 6i and have the values written into the database using insert statement.
I have a situation where only for a couple parent records, i am not able to insert child records using forms.
I am able to insert through backend.
any ideas.
thanks,
Edited by: 699704 on Sep 22, 2011 12:49 PM
Edited by: 699704 on Sep 27, 2011 7:52 AM

What error do you get?
If you get no error, check if you have proper error handling, not something like "when others than null", or an on-error trigger that doesn't show you the error.

Similar Messages

Ole2 commands not working in forms 10g

OLE2.set_property(Application, 'Visible', true);
above statement not working in forms 10g;

Try to use the OLE2 fuction from WEBUTIL library. There is function in webutil CLIENT_OLE2.
-Ammad

SQL Code not working in Forms Developer?

Hi all,
I'm using Oracle 10g and I have th following code running on iSQL+ but not working on Forms and I got the following erro
The SQL code:
     select returningreason
        from (
                 select returningreason,
                 dense_rank() over (partition by 1 order by count(*) desc) as drnk
                 from returned_goods
                 group by returningreason)
       where drnk = 1;And the error happens near the word over to the right and the error statement is:
Error 103 at line 18, column 19
   Encountered the symbol "(" when expecting one of the following:
         , formThanks in advance :)

Triggers are compiled in forms so need to use only the features available to forms, which doesn't include all the new stuff in the database.
select over partition
NVL2They don't work in forms and reports too.
Also if you use them in record Group
Forms/SQL Compiler was not lined up to the database(10G).
Meanwhile,for example. Pipelined TABLE and relative Select work in Reports AND Forms.

Help is not working in Form Builder 6i

Hi all,
I'm using Forms builder 6i in Windows7 system. When i go to Help menu and click 'Form Builder Help Topics' a error message is coming.
I've reinstalled it many times. In Windows XP system it's working fine. Why it's not working in Windows7?
Any suggestions??

Check this:
http://support.microsoft.com/kb/917607
Regards

TABLE_FROM_BLOCK is not working in forms 10g ??????

Hi all,
How to use TABLE_FROM_BLOCK in forms 10g. its working in forms 6i .
the same form is not working in 10g . i got this error.
frm-40933 Cannot populate table because datatype is incorrect.
pls help me
Regards
Gopinath M

According to Metalink's Developer 2.1 Release Notes (Doc ID #90090.1), section 4.2.1, "TABLE_FROM_BLOCK Built-In":
DO NOT use the TABLE_FROM_BLOCK built-in described in the
documentation. It is reserved for internal use only. No support
for this built-in will be provided under any circumstances.
If you used this built-in, you will need to recode your from(s) for 10g.
Message was edited by:
Mark Roberts

Button based on data is not working in form/ report / region

create or replace procedure "BUT2"
is
begin
declare
cursor c1 is select plot_id,plot_status from re_plot;
tno number;
v1 varchar2(500);
c2 c1%rowtype;
begin
open c1;
loop
tno := nvl(tno,0) + 1;
fetch c1 into c2;
exit when c1%notfound;
if c2.plot_status='BLOCKED' then
v1 := v1 || ' ' ||'<input inline type =submit style="color:BLUE;background-color:RED" value='||c2.plot_id||'>';
else
v1 := v1 || ' ' ||'<input inline type =submit style="color:ORANGE;background-color:GREEN" value='||c2.plot_id||'>';
end if;
if mod(tno, 4)= 0 then
--v1 := v1 || '<br/>' || ' ';
htp.p(v1);
v1 := null;
end if;
end loop;
close c1;
htp.p(v1);
end;
end;this above procedure works fine in SQL Command browser. I am unable to make it as page form / report.
My requirement is i want to bring this images in form / report. Based on click button, the value need to be parsed to other page?
how to do it?
yours
andi_raj

is not working Insufficient information. In what way is it "not working"? The page doesn't render as required? There's an error message? The browser crashes? The server room has been trampled into dust by a herd of buffalo?
>
I am unable to make it as page form / report.
v1 := v1 || ' ' ||'<input inline type =submit style="color:BLUE;background-color:RED" value='||c2.plot_id||'>';
...It is not possible to generate form elements in an APEX page in this way. The [APEX_ITEM API|http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_item.htm#CACEEEJE] is the only way to create APEX items in PL/SQL. However it contains no procedures to generate button items, so an alternative design is required in this case, e.g. a report with links.
(Also what is the intention of "inline" in the above code? [There is no *inline* attribute|http://www.w3.org/TR/1999/REC-html401-19991224/interact/forms.html#h-17.4].)

F7 & F8 key is not working in forms 10g

Dear all,
I am working with oracle application version 10.1.2.3.0, installed on windows server 2003 and database 10gR2 on windows server 2008. When i open any form and tries F8 / F7 to executed & enter
query, its not working. But its owrking with with F11 and shitp + F11. I want to use F7 & F8 for enter/execute the query. I have same another same environment with same configuration, there F7
& F8 is working fine. To enable these keys i rename fmrpcweb.res to fmrweb.res. But guide me with your sincere suggessions & experience.
Regards,
Ahmed.

According to Metalink's Developer 2.1 Release Notes (Doc ID #90090.1), section 4.2.1, "TABLE_FROM_BLOCK Built-In":
DO NOT use the TABLE_FROM_BLOCK built-in described in the
documentation. It is reserved for internal use only. No support
for this built-in will be provided under any circumstances.
If you used this built-in, you will need to recode your from(s) for 10g.
Message was edited by:
Mark Roberts

Enter key not working in forms 10g

Hi guys,
Enter key to select a form is not working
on my application.
I have to double click the form to open it using the mouse.
Then if we try to exit we have to press exit that many number of times as we have pressed enter key.
So it seems to be storing the key processes.
We are using forms 10g.
Please help.
Thanks and Regards,
Rohan

Fixed.
Changed KB.
However, this is still strange as the old KB was working fine in other applications.

SQL (Reverse) not working in Forms 6i

Hi:
Env 6i c/s 8i DB.
SELECT REVERSE ( '321' ) FROM DUAL works in SQL*Plus but does not accept the REVERSE function from within a Trigger. I could put the logic in a Package on the DB but I'd like to know why it does not work in F6i ?
Thanks
N.

Forms 6i uses an older version of PL/SQL than the database, so it does not recognize the newly introduced function. You will need to create a database function to call from the form.

MAXIMIZE WINDOW DOES NOT WORK IN FORMS 9i

Hi,
I am performing forms conversion and developing new forms in Forms 9i. The problem I am running into is that :
the SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, WINDOW_STATE, MAXIMIZE)
and SET_WINDOW_PROPERTY(ROOT_WINDOW, WINDOW_STATE, MAXIMIZE)
in the When_new_form_instance trigger don't work.
I've also tried adding a parameter to initiate the running mode as WEB as suggested in a response that I saw on this
forum, with that parameter I would set the ROOT_WINDOW State to NORMAL
then set WIDHT=800, HEIGHT=600, POSITION=0, 24.........
but it still does not work. When I run the form, the browser opens up as a full screen, but the form only fills up the gray rectangular
area when the Jiniator is running and loading the applet.
If I don't set the Maximize property of the main window to Yes then the vertical and horizontal scroll bars are automatically added,
if I do set so then no scroll bar is added and the form is cut off.
Is it a known problem ? and is there a solution to it?
Any response is greatly appreciated.
Thanks.
TLe

Thanks, it worked, and I've been playing with other parameters, such as replacing the lookandfeel (this works), but splashscreen and background don't when I specified the .GIF file name, it did not display the GIF image.
Thanks again.

pcs:insert not working correctly in Content Server 6.0

Hello,
I'm having a difficult time getting the <pcs:insert> tag working in Content Server 6.0. In the previous version of Content Server, I used <pcs:insert expr="mycontentitem"></pcs:insert> and the content item that I want inserted shows up fine. Now when I try it in Content Server 6.0, the inserted (child) content item tries to reference the parent's content item variables, giving me nothing. Also, I have tried using <pcs:insert path="mycontentitem"> to the same result.
Any help, or example of a working <pcs:insert> for Content Server 6.0 would be a lifesaver!
Thank you,
PK

We have the same problem with "INSERT" tags not working in the newest version CS6.0. I am a bit surprised that anyone had replied to your post to give us some explanations or directions how to solve the problem. It looks as a serious problem to me.

Mouse to switch primary and seconds buttons not working on Forms 6i

Hi All,
I am facing problem while i am using Form6i Application on web.
We have a couple users that they are left hand. When they set their mouse to switch primary and seconds buttons under windows setup.
The menus do not worked on Form6i Application, unless the user uses the keyboard.
On Form10g it's working fine but on Form6i it's not working.
Thanks in Advance.
Uzair

Hi Craig and thanks for replying,
The way I created the roll was under my username, not the administrator user. The first time I was not able to create a roll from my user, but I did this to be able to do it: GRANT CREATE ROLL TO <MY USERNAME>
The way I enabled the the Roles on y menu was as follows:
1) I open menu using Forms 6i.
2) Right click on my menu name and choose Property Palette.
3) Under Menu Security, I choose Use Security and select "Yes".
4) Under Module Roles, I typed a name for that role.
5) I go to SQL and create the new Role under my username giving the role the same name I gave it on Forms. This is how I created: Create role <Role Name>
6) Then I just assign that role to my user, like this: Grant <Rolename> to <username>
Hope this helps!!
Thanks again in advance!!

Buitin RAISE FORM_TRIGGER_FAILURE not working in forms Personalization

Hi,
I create a SIT where i dn't want user to create more than 1 record. I successfully able to set the condition and popup error message in action tab when more than 1 record is entered by the user. Now I want to stop further processing and for that purpose I use built-in RAISE FORM_TRIGGER_FAILURE. But it won't work and user can able to process further easily.
Can any one guide me how I acheive this using forms personalization?

Pl see ML Doc 420518.1 on why this does not work
HTH
Srini

Barcode Carriage Return Function not working in Forms 6i

Dear All,
I m using Oracle Forms 6i with OS Windows 2000 Professional
When I receiving Data from Barcode slot reader RS232 interface, carriage Return funtion not working in the forms 6i for e.g Barcode is *12345$M*
('$M' for carriage return). Full ASCII code enabled in my slot reader and carriage return switch is also on, its working fine on note pad.
Please help me in this regard
Thanks in Advance

Hello Muhammad,
Thanks for your reply, but unfortunately, this would not work.
Indeed, when I scan a barcode, the cursor is already in the text field and no event is triggered.
This idea is not to replace the Carriage Return but to have a When-Validate-Item with the Carriage Return sent by the barcode reader.
In Forms, when I scan in a multi-lines text field, the string is displayed and the cursor goes to the next line
But when I scan in a single line text item, it displays the strings but nothing else.
Kind Regards,
Olivier

ORDER SIBLINGS not working in Forms

This code run fine in Toad BUT giving me error in forms.
SELECT
       LEVEL                           LOC_NAME,
       LOCATION_NAME                   LOC_ID,
       LOCATION_ID                     HLOC_ID,
       HEAD_LOC_ID MUDRA
FROM AS_LOCATION_HDR
CONNECT BY PRIOR LOCATION_ID = HEAD_LOC_ID
START WITH HEAD_LOC_ID is null
ORDER SIBLINGS BY LOC_IDThe error is:
"Encountered sysbol "SIBLINGS" when expecting one of the following:
by
The symbol "by inserted before the "SIBLINGS" to continue.Is the SIBLINGS keyword not acepted in forms? What would be the alternative?
I am using oracle forms 10G (10.1.2.0.2)

hi
Oracle's START WITH and CONNECT BY clauses in the
SELECT statement automatically traverse a hierarchy.
Without this feature, a complex self-join would be required to identify
which rows are logically related to others.
The START WITH clause identifies the row or rows to be considered
the starting points, or "roots," of the hierarchy.
The CONNECT BY PRIOR clause
then indicates how to identify which rows are related to each other.
example, the query in Listing A produces a "Reports To" listing from the EMPLOYEES table in the HR sample schema provided by Oracle.
The LEVEL pseudocolumn indicates how deeply the report is currently nested; here,
I use it to LPAD the employee names to indent them.
The START WITH condition states that only employees 101 and 102 are to be considered as starting points.
The CONNECT BY PRIOR clause then links the employee_id
column in one row to the manager_id column in the next, to indicate who reports to whom.
If you run this query in the HR schema,
you'll notice that the last names are not sorted within the listing for a specific manager;
they are listed in the order Oracle encountered them in processing the hierarchy.
If you want the subordinates in alphabetical order,
you might try to ORDER BY the original last_name column.
However, this would break up the hierarchy, and turn it back into a flat list of names.
You might also try to ORDER BY the pseudocolumn LEVEL first,
which tells how deep a specific row is in the hierarchy. This, too,
breaks up the hierarchy—all the managers will be listed first, followed by people who report to any of them.
In Oracle 10g (both releases),
it's now easy to do this: You can use the new SIBLINGS keyword to create the correct ordering. The syntax is:
ORDER SIBLINGS BY <expression>So adding the clause:
ORDER SIBLINGS BY last_nameto the end of the query will preserve
the hierarchy and also alphabetize the last names within each level.
Note that the original last_name was used not the alias "Reports To."
The extra space padding in "Reports To" would affect the sort, so the original must be used.
Listing B shows the output, both before and after adding ORDER SIBLINGS BY.
The ORDER SIBLINGS BY clause is valid only in a hierarchical query. The optional SIBLINGS keyword specifies an order that first sorts the parent rows, and then sorts the child rows of each parent for every level within the hierarchy.
Rows that have duplicate lists of values in the columns specified after the SIBLINGS BY keywords are arbitrarily ordered among the rows with the same list of values and the same parent. If a hierarchical query includes the ORDER BY clause without the SIBLINGS keyword, rows are ordered according to the sort specifications that follow the ORDER BY keywords. Neither the ORDER BY clause nor the ORDER SIBLINGS BY option to the ORDER BY clause is required in hierarchical queries.
The hierarchical query in the following example returns the subset of rows in the hierarchical data set whose root is Goyal, as listed in the topic Hierarchical Clause. This query includes the ORDER SIBLINGS BY clause to sort by name the employees who report to the same manager:
SELECT empid, name, mgrid, LEVEL
   FROM employee
      START WITH name = 'Goyal'
      CONNECT BY PRIOR empid = mgrid
   ORDER SIBLINGS BY name;The rows returned by this query are sorted in the following order:
         empid name             mgrid       level
         16 Goyal               17           1
         12 Henry               16           2
          7 O'Neil              12           3
          9 Shoeman             12           3
          8 Smith               12           3
         14 Scott               16           2
         11 Zander              16           2
          6 Barnes              11           3
          5 McKeough            11           3
9 row(s) retrieved.Here the START WITH clause returned the Goyal row at the root of this hierarchy. Two subsequent CONNECT BY steps (marked as 2 and 3 in the level pseudocolumn) returned three sets of sibling rows:
Henry, Scott, and Zander are siblings whose parent is Goyal;
O'Neil, Shoeman, and Smith are siblings whose parent is Henry;
Barnes and McKeough are siblings whose parent is Zander.
The next CONNECT BY step returned no rows, because the rows for which level = 3 are leaf nodes within this hierarchy. At this point in the execution of the query, the ORDER SIBLINGS BY clause was applied to the result set, sorting the rows in the order shown above.
Because the sort key, name, is a VARCHAR column, the returned rows within each set of siblings are in the ASCII order of their employee.name values. Only the sets of siblings that are leaf nodes in the hierarchy of returned rows appear consecutively in the sorted result set, because the managers are immediately followed by the employees who report to them, rather than by their siblings. An exception in this example is Scott, whose child nodes form an empty set.
The SIBLINGS keyword in the ORDER BY clause is an extension to the ISO standard syntax for the SQL language. The SELECT statement fails with an error if you include the SIBLINGS keyword in the ORDER BY clause of a query or subquery that does not include a valid CONNECT BY clause. hope this helps u.
sarah

Insert not working in forms 6i

Similar Messages

Maybe you are looking for