Insert not working in updatable report

I have created an updatable report using the htmldb_item function with the facility to display an extra row (in order to create a new row).
I have then created a Create button that branches to the same page as the updatable reportn and a Branch.
I then created an after submit process that makes the insert of the data.
But apparently the process is not fired when I click the create button.
How do I have to do to fire a Submit on the page in order for my process to be run?
Thanks.

Just to amplify MtD's explanation, if you start to move a SINGLE clip and THEN hold down the Option key, the arrow will change form so that it has a 90 degree bend in it. Then when you release the clip in a new position by letting go of the mouse button, not only will it "insert" into the timeline at that position, but the gap in the timeline (where you pulled it from) will close.
It's really helpful when you are rearranging sound bites and don't want to have to manually close up the holes in the timeline. Unfortunately this only works when you are grabbing a single clip. If you do it with multiple clips it will still insert, but will leave an open hole in the timeline where you pulled the group from. Having Snapping (N) turned on is very helpful for this operation, by the way.

Similar Messages

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

3G is not working after updating to iOS 6.1

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
With this kind of bugs in every update, Apple will no more be THE Apple.
There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
Miss you Sir Jobs.....

I have since managed to sort mine out - when the phone was updated it wiped out the network settings.
I was able to reset them by manually putting the information in:
Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
Hopefully it will work for others too

Share calculation Not working in the report

Iam surprised not to ge the simple share calculation not working at my report.
I have a dimension and corresponding values ( measures) .I made a Total at the end of the report. and I want to calcualte share of Total to each corresponding value.
how to do this, any thougts,...
I have used calculated memebers for this, But I wan to make the percentage of the total ( which is calculated inside Tool itself)
Please help....

Prassad,
Not totally sure what you are trying to achieve but there a couple of possible solutions:
1) Total = total of all dimension members. Assuming you only have three dimension members then you should have a fourth member called ALL_DIMS or something similar. In the Share calculation template you need to specify the Total level as the basis for your share calc. This will generate the following result:
                         Revenue % Share
- All Members     600         100%
     A                  100           17%
     B                  200           33%
     C                  300           50%2) The total you are referring to is in fact a sub total and is the result of adding together only the results for A + B + C, i.e. you have hundreds of dimension members but you specifically want to see a total for just these three members. To do this create a new custom aggregate call "My Total" and add together the dimension members A + B + C - Custom Aggs are a new feature to Discoverer OLAP (Checkout Mark Rittman's excellent blog article for more information on this feature: http://www.rittmanmead.com/2006/11/13/checking-out-the-new-discoverer-101220-features/)
Then in the Share calculation wizard set the basis for your index using the last option in the list "Specific Dimension Member" and select your new custom aggregate member.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

Hi there Juicy Guava,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W.

Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere

Iphone 4s Cellular data not working after updating to ios 6.0 .

How to fix my cellular data, is not working after updating to IOS 6.0 ?

Hey my wifi quit about a month ago, and im running 5.1.1. I thought the fix would be to download 6.0, I guess not
I have a 4s, first it was charging problems now this...argh!

Head phone volume controls are not working after updating to ios 6.1 y?

head phone volume controls are not working after updating to ios 6.1 y?

I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

Insert not working in updatable report

Similar Messages

Maybe you are looking for