Inserted CD is not shown in Finder, neither possible to load nor to get it out... Any idea?
Inserted CD is not shown in Finder, neither possible to load nor to get it out again...
Restart with pressed left Mouse button or Reset didn't help...
Any idea? Thx
Have you tried using Disk Utility? Utilities Folder>Disk Utility, hopefully the CD will be listed on the left. Select it and then click on the 'eject' butoon.
Edit: If that didn't work, here's a few more suggestions: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD
Similar Messages
-
Embedded album art in audio files is not shown in finder since I upgraded to ML (worked fine in SL).
Other peaple report a solution of the problem with elimination of Voice Memos. But in my case this is not evident because I do not have Voice Memos.
Does somebody know the solution of the problem?After hours struggling with this issue I finally found a solution (my setup is iTunes 10.7, OSX 10.8.3):
(But my workaround is only for people who know how to handle iTunes libraries!!! And backup first!!)
Open a new user account on your mac.
Generate a new iTunes library called 'itunes', no other name!
Import some files with embedded album art.
Drag such a file back to desktop and you should see the icon of album art.
Everything is like it should be.
Now copy this new itunes library to your user account of origin.
But first rename your old iTunes library different from 'itunes' e.g. 'itunesorigin'
Open the new iTunes and drag one file to desktop, now miraculosly all audiofiles in all of your itunes libraries should show up album art IN FINDER including preview and quicklook.
But this state is not stable. As soon as you open the old 'itunesorigin' the problem starts up again.
So, the next steps are:
Open the new iTunes and in preferences select the media folder of 'itunesorigin'. OK, say no to 'collate data'. Close iTunes.
Now copy and replace from 'itunesorigin' to the new iTunes the following files:
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.itl
iTunes Library.xml
Open the new iTunes and it should look like the old 'iTunesorigin' with all your playlists etc..
Close again.
Move the media folder from 'iTunesorigin to the new iTunes folder (replace).
Open new iTunes and select in preferences the new location of the media folder.
Now you should have the file iTunes Music Library.xml instead of iTunes Library.xml.
(iTunes Music Library.xml is the default if you have multiple libraries)
Done! For me its stable and I am happy. Your iTunes folder should look like this picture: -
? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?
You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800 -
When downloading itunes 10 in windows xp, I get the following error "There is a problem with this Windoes Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor." - any ideas on how to proceed?
using MSICUU2.exe didn't help me. But, the new replacement app did:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
I fixed my problem like this:
Here's the deal -
1. can you install itunes via the APPLE SOFTWARE updater?
I couldn't so I downloaded ITUNES and tried to install it that way. Hence I got the same error hang as you. Nothing worked, (Multiple attempts at uninstall reinstall, stopping of Services, Reg cleaners etc..)
2. If answer is NO to #1 you must fixe the APPLE SOFTWARE UPDATE Program.
OK so I couldn't find a Download for this. But: if you have WINRAR, open the ITUNES.EXE and extract the APPLESOFTWAREUPDATE.MSI file. Execute the APPLESOFTWAREUPDATE.MSI separately. And you will not be able to install it and have a similar issue as per your Itunes install. This of course leads you to believe that the Itunes.exe install is also installing all of these components including the applesoftwareupdate silently. It must BOMB at that portion of the install and you are done.
3. Your goal now is to get the applesoftwareupdate installed. How do you do this. Well - here is what I did.
a. downloaded and RUN a PC Installer FIX it tool from Microsoft. This is a replacement for the older MSI fixer they used to use.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
b. It will list programs to attempt to fix.
choose AppleSoftwareUpdate.msi
c. Once it is done, then reinstall apple program updater using
AppleSoftwareUpdate.msi
Finally it should install since the Microsoft tool appraently fixed corrupted installation files in your registry for this application.
(Please note: that I also disabled any apple related services such as BONJOUR or IPOD DEvice RUN: services.msc to get there - although this man not be necesarry.)
Hence Launch this APPLE UPDATE SOFTWARE (Click the ICON in your Start menu) it should list ITUNES
select ITUNES from here and it will update.
KEY HERE is to ONLY UPDATE APPLE Stuff via the APPLE SOFTWARE UPDATE program. If that program is not working fix it. Then Bingo.
I am sorry to see folks having this problem for weeks.
APPLE, Spread the word. PC's can get corruption in the registry on your product should the update be stopped or computer shut off during an update. etc... Please improve your software updater program to check for invalid registry upon launching the app. This will prevent people thinking it is an APPLE issue. It appears to be a problem on your PC's registry settings for the APPLE Software update.
Bruno Ricci -
Just upgraded to Yosemite 10.10.3 including Photos 1.0 which is not syncing with Adobe Photoshop Elements 12 Editor (already installed)....any ideas?
....partially resolved, in case anyone else with sim prob.....
....with Photoshop open you click "Open" (top left) and 'Finder' opens up in the window with 'Photos' listed.
Select which pic you want to edit (duplicates must be created first in 'Photos") and it opens in Photoshop Editor
It's all a bit messy but seems to work. -
I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message. -
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
I cannot eject a CD from my MacBook Pro. I tried restarting the computer and holding down the mouse and restarting it to no avail. On Finder, nothing is showing up on the CD Drive. Any ideas on how I can eject it?
How force eject disc: Apple Support Communities
Mac Mini: Eject DVD Apple Support Communities
https://www.macupdate.com/app/mac/49129/forceject-too
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support -
my past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?
You can contact iTunes support and request that they remove the $0.68 from your account here:
http://www.apple.com/support/itunes/contact/
They should respond within 24 hours. -
When I open iTunes I get message 'This version has not been correctly localised for this language. Please run the English version' - any ideas?
Hi there nisbetk,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?
I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
Something doesn't make sense here, though I'm not saying the previous owner is lying....
Time to send your serial # to iTS and let them see what's happening here.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..
Total life saver. Thank you
-
All of my songs have exclamation points next to them but when I go to my iTunes media folder to find the files, there is nothing in the folders. Any idea what happened and how I can get my music back?
I wish I could help. There are numerous threads about missing music but last I looked, no solution. You might want to read through them anyway.
-
I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?
Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.
-
Just hooked up my APPLE TV to my Pioneer Elite Pro 1120 HD Just hooked up my APPLE TV to my Pioneer Elite Pro 1120 HD TV (2004/05). I get picture fine (although only 720p), but I can't get sound. Any ideas? I have a Optical Digital Audio cable, but not sure where to hook up?
how is it connected?
if you use a hdmi to dvi converter then you only get picture and not audio because dvi don't carry audio same with vga
Maybe you are looking for
-
I have already deleted all old downloads of firefox and reinstalled the latest update but i am still getting the same message. What can I do to fix this ? Anyone who can help , please use basic language and explanations as I am no computer whizz Than
-
More than oen apple tv with one computer
I jus bought the Apple TV for my home theater and love it... can I buy a second apple tv for another tv and use the same computer as my first apple tv?
-
Printing Purchase Order in Bulk
Hi all, Is there any way to print the purchase order in Bulk. I have a list of Purchase Order Primary key, and i have to print all the purchase order in bulk, with a click of button . Regards Bikram
-
We've received our Mac and motion is one of the reason we went for Mac and Final Cut Studio. I was instructed by a mac representative so I expected Motion to work properly but motion just quits regularly wile doing basic tasks. Just opening the layer
-
'Purchasing document does not exist' error while testing Inbound PO Idoc
Hi experts, i am working on Inbound PO Idoc scenario. I am testing Idoc in WE19 with ORDRSP mesage type. Idoc type:ORDERS05 Process code:ORDR FM:IDOC_INPUT_ORDRSP while trying to create PO it is giving an error 'Purchasing document does not exist' in