Inserting a blank page in webi

Hello All,
I have created a webi report with different sections in report.
My requirement is to insert a blank page before each new section in webi.
E.g If I have report with section Country and Region, then first blank page would get inserted before Coutry-->then country data would get displayed--->Again a blank page gets inserted and then Region data would get displayed.
What would be the way to achive this requirement?
Regards,
Chinmay

Hi Chinmay,
You could use relative positioning and place the second section far enough below the first so that it prints a blank page in between the sections. You might have to play with it some. It will also depend on how you are printing the report - PDF or other.
You may also want to check the section property "Start on a new page"
Thanks

Similar Messages

Acrobat Pro XI - Inserting a blank page creates a bookmark

When I insert a blank page Acrobat automatically creates a bookmark pointing to that blank page. Is there a way to prevent this behavior?

It's likely a HTTPS site or you have an authenticating proxy server where you are required to enter a password to acess the web page.

HT5557 Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

To enable the form to be signed in Reader you will need to open the form in Acrobat; goto Advanced>Enable Usage Rights and then save this copy of the form for sending out to the users.
The user should then be able to edit and digitally sign the form. They can then email the signed/saved pdf as a browsed for attachment or via the email icon in the toolbar. Note - if you have created an email submit button on the form, then unless they have Acrobat they could only return an xml file.
The other way to do this however is to create a dataset by 'distributing' the form. This time the Email Return button will send back a full version of the form. During the distribution setup you will have the option to email the form directly or to save it and send it later,so you can send to users as and when or even post it to a website or intranet.
When you receive and open the returned form it will ask whether you want to add it to the predetermined dataset (or if you want to categorise the returns into geographical areas for example, you could create new additional datasets at this point). If the form is data heavy however, the dataset will become very large and unwieldy pretty quickly, but you can export the data from it (including signatures) in xml format and import this into an Excel spreadsheet.
To simplify the Excel xml import process I'd recommend you carefully structure your form in the hierarchy (LiveCycle) into the order you would want the data items to appear in your spreadsheet and switch off those data items that you will not need by setting the default binding for the irrelevant fields to "None".
Clear as mud? Hope this helps.

Preview keeps freezing when I try to insert a blank page

I have been trying to edit pdf's, all is well until I try to add a blank page in the pdf and preview freezes. When this happens, I force quit, open Preview, and then insert a blank page - sometimes this doesn't work and I have to try multiple times before the page can be added.
Is there a way to fix this?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have a doc with pictures and I want to insert a blank page a top

When I insert a page break the photos within the text stay and do not shift down as I want. Or I insert a blank page and it only inserts at the end of the doc. I want a blank page at the top. How can I keep my text and photos in place and insert simply at blank page at the top? Thanks.

Menu > Insert > Section Break
before and at end of where you want breaks. Not Page breaks.
Your images are floating, if you want them to move with the text you will need to paste them into the text as inline objects.
Peter

Why are bookmarks being created whenever I Insert a blank page?

I am currently using a trial version of Adobe Acrobat Pro XI. I notice that whenever I want to edit my PDF and insert a blank page into the pdf that a bookmark will be created for each blank page that I am adding. I am wondering if the bookmark creation tool was some automatic selection that is applied when you create the blank page? Is it possible to turn it off? This can become quite a hassle if you are adding a number of blank pages sporadically throughout the document.

I am also trying to do this same thing.
I have followed the text as it is stated in
http://otn.oracle.com/products/reports/htdocs/faq9i.htm#43
but it still does not work.
My invisible line prints on every other page, however
my repeating frame prints on every page with no page breaks.
Do you have any suggestions?
Thanks in advance,
Vicki

How to remove blank pages from WebI Report in view page layout option

Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.

Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull.

On an iPad, how do I insert a blank page between two using iWork Pages?

I realize how many times I used the word 'pages' in the question, I was unable to think of a less confusing way to word it. :)
I am using an iPad with Pages loaded on it. All software is up-to-date. I have downloaded a few templates apps to use with it. I have figured out how to add a blank page to the end of the document (by hitting enter at the base of the previous page before it). However, I would like advice or assistance adding a blank page between two existing pages. The other "trick/work around" is not effective. I'd even appreciate learning how to change the order of the pages so I may place the blank sheet where I need it.
Hope this makes sense. Any advice would be appreciated. Thanks in advance,

Position the cursor where desired by touching the screen. In the selection bubble that appears, i.e., Select, Select All, Paste, Insert, choose Insert and from the insert menu choose Page Break. Two Page breaks will produce a blank page.

F4140 Pringting blank page from web pages & pdf

My F4140 is working and printing but is printing blank pages when I try to print from a PDF. I just tried to print a word document and it only printed the black and white section and left the color sections blank. It is also only printing the black and white portion of a web page and not the color portion (tried to print a one-time coupon).
I have done an alignment, cleaned the print heads and my ink levels are fine. The self-test print page prints both in color and black and white just fine. I tried the print as image and it still came out blank. The copier works just fine, too.
Apparently it is not printing anything that is in color. Any idea on what the problem is and how to fix?

Hello @Blue-is-me,
Thank you for visiting the HP Support Forums! I understand when you try to print from Webpages and PDF documents they are printing in black and white. You have done and alignment, and cleaned the printheads with no success. To better help you can you please let me know the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. Do you get any error message when you attempt to print?
3. Have you recently made any changes to the computer or printing preferences?
Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know what the PSDR finds, I hope to hear from you soon.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How do I insert a blank page if my group ends on an odd-numbered page

I have a report that prints out information for 10 regions. We print this report double-sided and put it into a 3-ring binder with 10 divider tabs, one for each region. If the last page for a particular region is an even-numbered page, then everything is OK since the next region begins on an odd-numbered page (the right-hand side of the open 3-ring binder). However, if the last page is an odd-numbered page, this causes the next region to begin on what would be the left-hand side of the open 3-ring binder which is not acceptable. I have considered printing each of the 10 regions separately (a seemingly easy solution, but our pages are required to be numbered consecutively through the regions - and are also of the type Page &Page of &Total_Pages).
How do I create a BLANK PAGE at the end of a region if it ends on an odd-numbered page?
I am using reports version 6i with 9i as my backend database. It just occurred to me that occasionally in printed material, one sees "This page intentionally left blank", usually on the last page of a chapter to permit the following chapter to begin on the right-hand side. If anyone has created a solution to get this "..intentionally left blank" page to print, this seems to be a close fit to what I am trying to do.

I am also trying to do this same thing.
I have followed the text as it is stated in
http://otn.oracle.com/products/reports/htdocs/faq9i.htm#43
but it still does not work.
My invisible line prints on every other page, however
my repeating frame prints on every page with no page breaks.
Do you have any suggestions?
Thanks in advance,
Vicki

Every time I add a section break it inserts a blank page prior to the new section.

Not sure I understand why it does this, and how do I get rid of the blank page?

I cannot duplicate the unwanted extra blank page when adding a new section in Pages v5.5.2. Are you using a template other than blank?
You can remove the unwanted page by choosing View > Show Invisibles. Then, scroll backwards in your document until you get to the first occurrence of the following section or page break. You can tell if it is a page break because in thumbnail view, the page icon is smaller that the section icon.
Double-click this line to select, and then press the delete key. Your extraneous page (or section) is now gone.

Is it possible to insert a blank "page" on my iPhone 4s screen?

I'm trying to reorganize my iPhone app icons and want to make a BIG space, after the home page but before my 4 other "pages."
Is there any way to just INSERT an entire page, after the home page?

Em
I would try doing this in iTunes by arranging the Apps on your device app tab. I have never tried to have a page with nothing on it but I do have a page with only one app on my second page/screen.
Cheers

Blank page from Webi on iPad 6.0.6

Hi everyone,
Intro:
We have a customer system: SAP BO 4.1 sp3 with SAPBI Mobile 5,1.8
They run some webis through iPad until last week, when they updated it to SAPBI Mobile 6.0.6
Symptoms:
When open a Webi on iPad (6.0.6) only show the title of first page blank. It can be refreshed but it doesn't show anything.
Testing:
- We check with an iPad on 5.1.8 version and still works ok.
- We check on iPhone (6.0.6) and works fine (strange isn't it?)
- We create a blank webi document with 3 reports. No connections, no objects, no nothing.... and fails on iPad 6.0.6
- We open a webi with single report page and works fine.
Help (please):
Someone has the same error? Thanks in advance
Attached:
A image of iPad (6.0.6) with blank webi. This webi has 7 reports (pages) but only show the first page.

Hello Juan Liz
This could be a potential "regression" in the app.
Or the fact that the 1st report does not contain anything might cause this.
Try to add an empty Table in the 1st page (Report Tab)
If still an issue please log a support incident (OSS) so that we can investigate further.
Thanks
Edy

Is there any way to insert a blank page in the middle of a document (rather than at the end)?

I can do this in Word, but not Pages. I'm using Pages '09 Version 4.1. Any help would be appreciated.
Thank-you!

You can also click at the end of a section and insert a new section from the Sections link on the toolbar.
Basic rule is if you are clicked in the text, then the new section will go after the current section.
If you are not clicked in the text then the new section will be at the end of the document.
A section obviously does not fit inside an existing section.
Peter

Is it possible to INSERT a blank page Between existing pages? Everytime I try it inserts the page at the END of the document.

Everytime I try it inserts the page at the END of the document. The HELP is no help, and I can't find any other documentation on being able to do this. Appreciate the feedback. Thanks! - ph

AP,
As Fruhulda notes, a Section Break is an Inline character that will move all text below it to the next page. With a combination of graphics and text, and with the graphics having the property of Object Causes Wrap turned on, you will get these apparently odd behaviors. This is why I often favor the Page Layout mode myself. As many experienced users will say, you can do anything in a WP doc that you can do in a PL doc, but in my opinion the WP features often get in the way of simple operation when graphics are involved.
Glad you are on track now.
Jerry

Inserting a blank page in webi

Similar Messages

Maybe you are looking for