Inserting a clip at the beginning of a edited string of clips?

I have five clips edited together. I need to put one more clip at the beginning of the string. Is there a way to move an entire string of clips forward all at once so that I can slip the clip in? Hope this makes sense?

What CC and Ann recommended is right on the money for your immediate goal of inserting a clip before clips that are already in the timeline. But there will be other occasions when you want to select multiple track items. There are several ways to do so:
To select all track items before or after a given point, select the Track Select Backward or Track Select Forward tool and click the timeline. Those tools select clips on all tracks; if you want to isolate a single track, hold SHIFT while clicking.
With the Selection tool active [V]: click a blank spot in the timeline and drag across the desired clips. This is called "marquee selection." By the way, if you do this with the Ripple Edit or Rolling Edit tool active, the edit points between clips will be selected rather than the clips themselves.
Also with the Selection tool, shift-click the track items. This is the best method when the clips you want select are intermixed with others that you want to leave unselected.

Similar Messages

  • Imovie song does not start at the beginning after I edited the duration of the clip

    my imovie song does not start at the begining after I edited the duration of my clips. The audio clip now starts in the middle of the song. This is occuring with the second song in my video. How do I adjust the audio to start at the beginning of the song.

    For pop ups. From your Safari menu bar click Safari > Preferences then select the Security tab.
    Select:  Block pop-up windows
    safari starts always with top page even I have apple.com as a starting window
    Back to Safari > Preferences. This time select the General tab. You can reset your homepage from there.
    history its not saving or at least not showing when i press the thingy that looks like a little book on the tools bar
    That icon represents your Bookmarks not history.
    To view history, from your Safari menu bar click History > Show History
    Or Option + Command + 2 on your keyboard.

  • Can a single quote be used at the beginning of a query string parameter

    Hi all,
    I am a relative newbie and have a newbie question.
    Can a single quote be used at the beginning of a query string parameter passed to a jsp page? Are there any inherant problems with this? Is there a comprehensive list of characters that must be escaped in a query string parameter?
    Example: http://mysite.com/myjsp.jsp?param1='nghdh
    Thanks

    You'll have to escape most non-letter characters before you can pass them as a URL. I don't know if it's necessary for a single quote, but better safe than sorry.
    Either use java.net.URLEncoder(...) or use javax.servlet.http.HttpServletResponse.encodeURL(String). I wouldn't recommend using unescaped characters in your URLs, that might cause pretty funny behavior that's sometimes hard to trace back. Don't worry about decoding it, your JSP/Servlet container will do it when you call javax.servlet.http.HttpServletRequest.getParameter(String).

  • Inserting other project at the beginning

    I have created two separate iMovie projects on two separate computers. The first is all set to one song. The second has three separate songs, but is all one in one project. I want to insert the first project at the beginning of the second project, including the song. I plan on copying the first over to my external drive which already has the second project on it and then opening both projects at the same time on the same computer. I know I can copy all of the clips and paste it at the beginning of the second project but when I do that the clips all move over but the music stays just as it was and the music from the first project doesn't come over with it. How do I do that?
    Thanks!
    powerbookg4   Mac OS X (10.4.6)  
    powerbookg4   Mac OS X (10.4.6)  

    I read below and wonder if this is the best way to do it:
    "Or, you can save each movie as a QuickTime Full-Quality movie, and open a new iMovie project and drag the QT movies into it. You cannot edit these in the same way as the original iMovies. The QT movies are new movies with the sound/video you put in when editing them the first time. This method will give you a very smooth playback. It will require more free space as you are basically making a copy of each movie. However, once you have created the QT movie, you do not need to save the original iMovie, and can delete it to free up hard drive space.
    Then, you can use the QT movies to make your DVDs, either separately,or as one long movie.
    One thing to remember: if you made chapter markers in your original iMovie, they will not show up in the QT version, so you will have to create them again."
    powerbookg4   Mac OS X (10.4.6)  
    powerbookg4   Mac OS X (10.4.6)  
    powerbookg4   Mac OS X (10.4.6)  

  • How do I insert an image at the beginning of a composition lightbox sequence

    Using v4.1 build 8 on MacBook Pro10.6.8
    I have an existing lightbox,and I want to add an image (trigger) at the beginning of the sequence, displacing the other triggers/ images to the "right", or "down". 
    Alternatively, is there a way to re-order the sequence of the triggers/ images on the page?
    Joan

    Hello,
    You can add the new image and after that select the trigger and Drag it to the left of the first image.
    Please refer to the video : http://trainingwebcom.worldsecuresystems.com/SachinFTP/2013-06-18_2120.swf
    Regards,
    Sachin

  • Insert a line into the beginning of a file without overwriting data

    I would like to dynamically alter/add new headers to a csv file as needed. The code I have below overwrites the previously written data an amount equal to each new header added each time I call the vi below. Any suggestions on how to do this without reading in the file each time? I want to avoid the processing time of reading in the file between processing new data.
    Thanks!
    Attachments:
    R900 - Log Data Stream to File.vi ‏22 KB

    Yes, but you can still write everytime, you dont need to read the file back.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • Getting running total formula result at the beginning of the report

    Hello All,
    I am having an inquiry that if I can get a grand total in the report footer to the report header.
    The grand total is not a direct sum.  I am using three formulas
    the first formula:
    @reset Group Header
    whileprintingrecords;
    numbervar sumpct4;
    if not inrepeatedgroupheader then
    sumpct4 := 0;
    the second formula: Details section
    whileprintingrecords;
    numbervar sumpct4 := sumpct4 + {@Total_Market};   // {@Total_Market}; =  Amount+ Interest
    numbervar grtotal4 := grtotal4 + {@Total_Market};
    Group Footer
    whileprintingrecords;
    numbervar sumpct4;
    Report Footer
    whileprintingrecords;
    numbervar grtotal4;
    All that I need is to show the total which is in the report footer at the top of the page where I am having a summary.
    So, can you please help me.
    Thanks
    Edited by: maas maas on Sep 8, 2010 12:48 PM

    Hello my friend,
    I want this to be controlled in crystal.
    Is there is a way to get the grand total by using multiple formulas or any other way?
    Here is the structure of my report:
    Group Header 1: CCY
    Group Header 2:Type
    @reset Group Header
    whileprintingrecords;
    numbervar sumpct4;
    if not inrepeatedgroupheader then
    sumpct4 := 0;
    Group Header 3A: Deal No
    Group Header 3B: Deal No (subreport to get the {@amount} for each deal)
    I will pass the end_date from the main report to subreport and I will get the sum(amount) for each deal between date (1-1-2008) to end_date. The sum will be as a shared variable to the {@amount} formual in the main report.
    Details:
    Deal No, {@amount}, {@Price}, {@market}, {@Total_Market}
    {@Price}: if {table.price} = 0 then
    100
    else {table.price}
    {@market}: if Type <> "DEP" then
    ({@amount}*{@Price})/100
    else
    {@amount}
    {@Total_Market}:{@market}+ {@Price}
    Running formula to get Total_market: Details section
    whileprintingrecords;
    numbervar sumpct4 := sumpct4 + {@Total_Market};
    numbervar grtotal4 := grtotal4 + {@Total_Market};
    Group Footer 3B: Deal No
    Group Footer 3A: Deal No
    Group Footer 2:Type
    In this group I am placing a running total formula:
    whileprintingrecords;
    numbervar sumpct4;
    Group Footer 1: CCY
    Report Footer:
    @grand_Total
    whileprintingrecords;
    numbervar grtotal4;
    Now, i want this @grand_total formula result to be shown in Group Header 1: CCY.
    I tried to insert a subreport at the beginning which it is a copy of the main report, but I did not get the coorec t result because I am getting the {@amount} from a subreport and in crystal I can't insert a subreport in an existing subreport.

  • Output on existing file at the begining??

    Hi,
    I have a problem about outputing.
    I want to write some texts at the begining of existing file.
    eg... file A
    "Hello
    then i want to insert some texts at the begining
    e.g. insert "YOU"
    then file A
    will become
    "YOU HELLO
    any idea?
    thank alot

    In order to make room for new data at the beginning of a file it is neccessary to shift the original files content towards the end of the file. This cannot be done without copying (read/write) the whole content of the file.
    But as you mentioned the term log-file have a look at other log-files written by applications. The newest entry is always at the end of the file. The reason for this is that people encounterd the same problem you have right now.
    As a matter of fact, if I read any file with log-entries in my editor I jump to the end of the file right away and start reading the entries backwards from there. People are used to it, just append your log-entries to the end of the file.

  • How do I insert Greek characters from the character viewer in Lion?

    In Lion, the Character Viewer shows many more options for different characters than SL.  Of course, it displays Latin, but, as I scientist I often need to insert Greek characters, but I cannot find Greek characters in the Character Viewer.  I don't otherwise need to select Greek as a language.  Inserting Greek characters from some applications like MS Word still works.
    And ... while I'm here ... what happened to the "insert" button?  -j

    Click the gear icon to edit your list:
    Select Customize List:
    and check "Greek"

  • Separate clip flashing at the beginning of each clip

    Each clip I insert into my sequence has a brief flash of another clip at the beginning of it.
    When I select the clip and trim the unwanted piece away, the unwanted piece simply shifts to the the next available point on the clip.
    This repeats for every new clip I insert into my sequence.
    What feature is causing this, and how to I turn it off.
    I am new to Premiere, and I am unsure as to whether this is related to the problem, but the attached picture shows a piece extending right from the marker.
    I don't know if this has any significance, but it seem's relatively close to the length of the unwanted piece, and it's all I can find out of place.

    the Micro photo (not sure about the micro) has what your referring to as long as the screen is on. It's a sad known bug. Just set your screen to turn off ASAP and basicly deal with it. Noone on the Head-Fi forums can find a fix for it either

  • How do I insert a clip into my Primary Storyline?  Every time I try to insert a clip the way instructions say, it goes into the title storyline (at top) instead.

    I have been unable to find out how to select the storyline where I want a clip inserted.  Every time I try to insert a clip at the beginning of my project, it goes into the Title Storyline, not my primary one.

    What does the instruction say? Are you pressing the Insert button? Are you using the W key? Are you tryin to drag into the storyline?
    If you have a secondary storyline, make sure it's not selected when you do the edit.

  • Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  Word was much easier for me

    Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  I found word much easier to use.  Please help. Trying to do a resume.

    On a US keyboard it is Option + 8 (above the letters). •

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • One second of black appearing at the beginning of each clip in timeline.

    I just got FCP and I'm having an issue.  Every time I put a clip from the event brower into the timeline, there's a second of black at the beginning of each clip.  This is only between clips, not the first one.  If I move a clip to the front, there's no second of blackness before it, but now the one that was put second has the blackness that wasn't there before. 
    I see in preferences, there's a transition setting, but it won't let me set it lower than one.  I figured this had to do w/ transistion effects, but could this be doing it?
    Both video and project are 720p HD 30p Stereo.
    I've googled all kinds of word combinations, but can't seem to find a solution.
    Any help?

    Complete mystery to me as well, and when I have something odd like this, I trot out the following suggestion:-
    Corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.

  • How do I insert additional clips into my video timeline in Elements 13?  When clicking 'add media' it added the clips at end of video rather than in their appropriate position.  Could not 'cut and paste'.

    How do I insert additional clips into my video timeline in Elements 13?  When clicking 'add media' it added the clips at end of video rather than in their appropriate position.  Could not 'cut and paste'.

    bhsleadership
    I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
    For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
    1. Are you working from the 8.0/8.0.1 Update of the program?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
    2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
    For Background Rendering option. See Edit Menu/Preferences/General.
    For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
    Is your computer optimized in spite of the fact that  you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
    Looking at the properties of your source media, I see:
    video compression = MPEG1
    audio compression = MPEG-Layer1 (.mp2)
    Frame Size = 640 x 480 (4:3)
    Pixel Aspect Ratio = 1.0
    Frame Rate = 30 progressive frames per second
    With properties like those you are sure to get a red line over that content since there is no project preset with that description.
    But, your choice of the default NTSC DV Standard would have been mine also.
    I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
    To be continued.
    ATR

Maybe you are looking for