Inserting a logo in the istore sections

Hi all,
How will i insert a company logo when i am creating a speciality site for customers in istore.
Regards,
Prasad

Hey,
This is super easy. If you click and drag the image you want over the top of your clip and select picture in picture you will be able to do this.
Check out this link if you need the steps on how to do this:
http://imovietutorialhelp.com/imovie-picture-in-picture-tutorial.html
It's a great resource if you have questions about iMovie.
I may receive some form of compensation, financial or otherwise, from my video or link.

Similar Messages

Inserting a logo into the header and footer

Hey Team
I have a workbook with 5 worksheets. On sheet1 I have a button programed to open a new Word document; pull information from fields on 3 other sheets and creates a letter from that data. I have two company logos pasted into sheet5,
Pic1 and Pic2.
I want to copy Pic1 and paste it into the header and copy Pic2 and paste it into the footer of the newly created word document and have them both centered and on all pages.
As of now I can copy the Pics and paste them into the document body but have had no luck with the header or footer. Any help is greatly appreciated.
Thanks!

First, when you create a Word doc you should always create it based on a predefined template. The template has all your corporate styles set etc...VBA code should only be used to insert text. I almost never use it manipulate anything that can't
be set in templates. The templates should already have the logos inserted.
Set rptDoc = Documents.Add("C:\templates\example.dotx")
rptDoc.SaveAs fileName:="C:\....................docx", _
FileFormat:=wdFormatDocumentDefault, AddToRecentFiles:=True
If you add a picture I recommend adding at it a predefined bookmark in the template. I do this when adding signatures. The bookmarks can be in the header.
Sub SetBkMarkPic(xDoc As Document, xBkName As String, xFile As String)
' Set bookmark in document. Add file to bookmark
If xDoc.Bookmarks.Exists(xBkName) Then
xDoc.Bookmarks(xBkName).Select
xDoc.Bookmarks(xBkName).Range.Text = ""
Selection.InlineShapes.AddPicture fileName:=xFile
End If
End Sub

How to get SYSDATE in the header section dynamically when we run the report

I have one more issue may i know how can i get the sysdate in the header section when i run the report.
as we have the requirement like this
In the header section
Run Date : ("sysdate").
How to get the sysdate dynamically in the RTF template, when i go across the google i found that header and footer section did not allow form fiields .
So is there any way to do it.
Thanks in Advance.
Have a Nice Day.

You cannot insert form fields in the Header section, but you can just insert the code to achieve this. For example: insert this in the header section to view the sysdate: You could format the date as you would like..
<?xdoxslt: sysdate(‘YYYY-MM-DD’)?>
Since you are new to BI publisher, search the forum, review the Report Designer's guide for BI publisher. You will find that most of your basic questions are answered there and there are examples as well.
Thanks!

Inserting my logo

I am trying to insert my logo into the corner of a video I made and am having troubles. I have the image in a separate video track and it appears alright. The problem is that I want to image to appear all of the time and it does not work with the transitions between scenes. It seems to cancel the transitions out for some reason. Do anyone have any idea how to fix this?

As DH says. We clal this watermarking, sometimes.
I'd do it this way:
Create a new sequence, call it "with watermark."
Go back to your original and delete the logo track.
Render the original sequence completely.
Export the original as a self-contained movie.
Import the new movie.
Drop it on your new "with watermark" sequence and add your watermark logo to V2.
I suggest you do it this way because you will probably be making changes to the original work and you will want to have the ability to deliver it without the logo. Doing the watermark as a last step enables you stay flexible.
you can also use the sophisticated watermark feature of Compressor to burn in logos. It's cool but a bit difficult to grasp at first. Work with short clips til lyou get the hang of it.
bogiesan

How to insert the image or logo into the table as a field in webdynpro abap

Hi Friends,
Please tell me how to insert the image or logo into the table as a field in webdynpro abap.........

Hi Alagappan ,
In your view layout you take table UI element and then you bind it with some context nodes.
The attributes of your nodes comes as a field.
Now in these fields you can set various properties and image is one of them.
Go to ->
1. View Layout -> Right Click on ROOTUIELEMENTCONTAINER -> INSERT ELEMENT -> TABLE
2. Right click on table -> Create Binding.
Here you have to bind it with the appropriate context node.
You will get two properties here
a- Standard Cell Editor :- ( make it image )
b- Standard properties :- ( If required set image properties ).
3. If you want put image from out side then import it as a mime object and set the source of your table field ( used as a image )
also have a look :-
[Image Properties|http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm]
Hope this will solve your problem.
Reply if any case of any issue.
Thanks & Regards,
Monishankar C

How can I insert a logo into my signature but keep the typed signature?

I want to type info & also insert my logo
Example:
Carl Clouser
Director of Sales
TRYST Electronic Smoking Products
[email protected]
724-679-4212
www.enjoytryst.com
www.facebook.com/enjoytryst
www.twitter.com/enjoytryst
Insert logo here
plus I want the links to be hyperlinks which can be clicked on

Hello,
See here information about signature:
*[https://support.mozilla.org/en-US/kb/signatures Signatures]

How do I insert a page in the middle of a section in iBook. The insert always puts it at the end of the section.

I am writing an iBook, and I need to insert a page in the middle of the section without disrupting the layouts on the following pages. I keep trying to insert, but it always sticks a new page at the end of the section. Is there any way to add a page, or move pages around in an iBook?

Using the thumbnail view on the left, select the page you want a new one after, then right click and choose 'Insert Page'....that should do it.

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages - what the **** is going on???

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.

You can not insert a section break into a textbox.
You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
You may find this a usueful resource as well:
http://www.freeforum101.com/iworktipsntrick/
Peter
PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating.

Google tell me to insert their codes a site map in the head section before the first body section.. but where is it on my welcome page?

Google tell me to insert their codes for a site map in the <head> section before the first <body> section.. but where in exact terms is the head & body section on my 09 iwebsite?

It's been a while since I had to verify my sitemap with Google, but if I remember, there were two options for verification. The one I chose was an HTML file verification. That's a file that would be put in your Site Folder in GoDaddy. Google would then crawl your site to verify that way. I found that much easier than putting a file in the website itself.
It would be a file that looks like this: googlebe235d8cb7e91037.html
And would live in your Site Folder on Godaddy like this:

Every time I add a section break it inserts a blank page prior to the new section.

Not sure I understand why it does this, and how do I get rid of the blank page?

I cannot duplicate the unwanted extra blank page when adding a new section in Pages v5.5.2. Are you using a template other than blank?
You can remove the unwanted page by choosing View > Show Invisibles. Then, scroll backwards in your document until you get to the first occurrence of the following section or page break. You can tell if it is a page break because in thumbnail view, the page icon is smaller that the section icon.
Double-click this line to select, and then press the delete key. Your extraneous page (or section) is now gone.

Dynamically changing MAXWSCLIENTS in the MACHINES Section

Hi,
is it possible to change the MAXWSCLIENTS parameter which is in
the MACHINES section of the config file while Tuxedo is running?
I thought this would be possible with tmconfig but I'm not quite
sure.
Any ideas or advises?
Sonja Kolb

Hi,
You can use if condition to switch between logos
Eg:
<?if:VENDOR_NAME="SAM"?>INSERTED IMAGE<?end if?><?if:VENDOR_NAME="JAM"?>INSERTED IMAGE2<?end if?>....and so on
please try this and get back if you have any problems..
--prasanna

How do I add a tiny logo to the tab in the browser?

How do I add a tiny logo to the tab in the browser?

Hello,
You're most possibly referring to "Favicons", and they can be added in a Muse site from the "File -> Site Properties -> Layout" section. Check this screenshot: http://jingsite.businesscatalyst.com/jing/2013-09-05_2332.png
Hope this helps.
Cheers
Parikshit

How to insert a condition in the Graphic Window of a SAP Script ?

Hi,
I need to give a condition inside the Graphic Window for printing the Logo in the SAP Script. Now, my problem is that the Graphic window is only opening in Display mode. How to make it editable and insert a condition in it?
OR
Is there any other way to do it?
Please Help.
Thanks in Advance.
-VRU

Hi
I got your point. I'll provide you solution
In the logo window goto coding part by pressing F9 and give your coding as
IF &BKPF-BUKRS& = 'COM1'
INCLUDE GSPL OBJECT GRAPHICS ID BCOL LANGUAGE DE
BITMAP 'LOGO1' OBJECT GRAPHICS ID BMAP TYPE BCOL
ELSEIF &BKPF-BUKRS& = 'COM2'
BITMAP 'LOGO2' OBJECT GRAPHICS ID BMAP TYPE BCOL
ELSEIF &BKPF-BUKRS& = 'COM3'
BITMAP 'LOGO3' OBJECT GRAPHICS ID BMAP TYPE BCOL
ELSEIF &BKPF-BUKRS& = 'COM3'
BITMAP 'LOGO4' OBJECT GRAPHICS ID BMAP TYPE BCOL
ELSEIF &BKPF-BUKRS& = 'COM4'
BITMAP 'LOGO5' OBJECT GRAPHICS ID BMAP TYPE BCOL
ENDIF
<b>Note:</b>But you have to upload all your logos in se78 then only you can upload and give conditions for this
Regards
Pavan

How to insert a logo in sap script?

How to insert a logo in sap script?

Steps to insert a logo,
I
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
II
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
the graphics to be.
III
1 ) create a bmp file in local system
2 )RSTXLDMC FM to upload image in tiff format.
Also check these links...
Logo in SAP SCRIPT
Re: Uploading a (Image) Logo in your Sap Script
Need Urgent Help for Logo Uploading the Sap Script
sap script logo
http://www.sap-img.com/ts001.htm
Regards,
Sakthi Sri.

Premiere CS3: How can you encode xml cue point data in the chapter section of a marker for FlashVid?

Hi there,
I'm a total newb to this forum, so hello adobe premiere community! I'm perplexed by Adobes documentation on Premiere (and I'm sure I'm not the first ) anyway on the live documents page below:
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS9390BED7-9466-46ea-A0E A-3240F1AFC36C.html
it states that:
“The cue point data in the Chapter field of a sequence marker in Adobe Premiere Pro will be encoded as Flash XML. For the XML protocol required, see Flash Help.”
Which is great…except this information doesn’t exist seemingly in either the Premiere documentation or Flash either for that matter, but as I’m interested in working with the chapter/marker area in Premiere – should I really be told to go off and search the documentation for another application, probably not! What would have been useful would have been a code snippet saying you do it like this, but of course, that would make things too easy!
Basically, I understand that in After FX you can add Flash marker information specifically for interpretation when exporting to Flash Video (i.e. name, type and parameters etc) and it suggests that you can do the same above in Premiere CS3 using some kind of concatenated string in the chapter area…it just doesn’t tell you how anywhere seemingly – WHY ADOBE!
Currently when I export markers as cue points based on the advice in the page above, anything I put in the chapter section to force Premiere to create a cue point is converted to a string, which becomes the cue point ‘name’.
This cue point name is then automatically appended to the ‘time’ the marker was inserted at and is always encoded as type ‘navigation’, with no obvious means of adding ‘parameters’ into the equation.
So (finally) does anyone know if you can insert this information into the chapter area for correct interpretation by flash (i.e. thus allowing you to choose between either 'navigation' or 'event' types, and pass as many 'parameters' as you wish etc) or are you just limited to supplying a name, and it being automatically set to the navigation type with no parameters?
I’m sorry for this long essay but at least the issue is well defined for you to answer, honestly any help you can provide what so ever would really be most appreciated!
Best regards,
Kat
PS – I have utterly no knowledge of XML either just in case you were wondering – and my only interest in XML is getting this basic information encoded into the FLV file from Premiere Pro CS3! Please help, pretty please with daisy’s!!!

Hi dradeke,
Thanks for your reply, which is indeed useful as clearly Adobe have made this task easier and less obscure in CS4 by adding simple interface functionality, however I'm stuck with using CS3 for the moment. Its not majorly a problem as the video material in question can be exported uncompressed then setup with cue points using the Flash encoder as an alternative (i.e. or even After FX CS3 also) which both provide the same features as Premiere CS4 seemingly. It is just that it would be much easier to be able to drop in simple markers whilst working with Premiere CS3, as this is what we are going to be using primarily, I just wondered if anyone knew how to invoke this in CS3 - its possible you can't, the documentation is vague at best!
However I really appreciate your response and help, thanks

Inserting a logo in the istore sections

Similar Messages

Maybe you are looking for