Inserting an automatic Date and Time

Hello Everyone,
Thanks for all the help in the past.
I own a couple of summer rental duplexes at the Jersey shore
and basically use my website as an advertising billboard of
pictures.
On my "Availability and Rates" page, I display a calendar
with my open weeks shown and also the weekly rental rate for each
week. How can I insert a Date/Time display that automatically shows
visitors that I have updated on such-and-such a day? Here is my
webpage:
http://www.lbibeachrentals.net/2009%20Season%20Calendar.html
TIA for any advice and help.

Use Javascript.
e.g.
http://www.web-source.net/web_design_tips/last_modified_date_web_page_script.htm
http://www.w3schools.com/htmldom/prop_doc_lastmodified.asp
Regards
John Waller

Similar Messages

Samsung Galaxy S 5 - using automatic date and time

Using automatic date and time sets the date to November 27, 2014 instead of the correct date of September 25, 2014. What's going on? I haven't ever had a problem with this setting before.

Clear phone system cache & place phone in Airplane mode then do a power down (not a restart) of the phone. Next remove both SIM card and battery & wait for 1 minute or so. Then reinstall the SIM & battery and power phone on. If your signal is strong this should reset your data channel to the correct time.

Snow Leopard users: Turn off automatic date and time in System Preferences immediately

http://arstechnica.com/apple/2014/12/apple-automatically-patches-macs-to-fix-sev ere-ntp-security-flaw/
When exploited, the NTP flaw can cause buffer overflows that allow remote attackers to execute code on your system.
What this means is that, if you allow date and time to be set automatically by outside servers, you risk having your computer taken over.
This is a critical issue, it's being exploited as we speak, and Apple has not provided the update to Snow Leopard users, only to 10.8/Mountain Lion and above. I strongly doubt Apple will ever get around to issuing an update for Snow Leopard, or they would have already. Chances of that happening are close to zero

To me 10.6.8 is still the best OS X Apple ever released and I patched my system just like the shellshock back in September. It's really easy if you have some basic shell skills and XCODE installed,
Here is what I did, it may save you some time:
open the terminal app
1) Download the source code, apply the patch (I got the source code links from the ntp site)
cd ~
mkdir ntpd-fix
cd ntpd-fix
curl http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-4.2.8.tar.gz | tar zxf -
2) Patch and compile the ntp source code
cd ntp-4.2.8/ntpd
curl http://bugs.ntp.org/attachment.cgi?id=1165 | patch -p1
cd ..
./configure && make
3) Open the system preferences - Date & Time - uncheck Set date and time automatically (to stop the process)
4) Rename the old object and then replace/copy them with the new objects
cd /usr/bin
sudo mv sntp sntp.old
sudo mv ntpq ntpq.old
sudo mv ntp-keygen ntp-keygen.old
cd /usr/sbin
sudo mv ntpdc ntpdc.old
sudo mv ntpdate ntpdate.old
sudo mv ntpd ntpd.old
cd ~/ntpd-fix/ntp-4.2.8
sudo cp sntp/sntp /usr/bin
sudo cp util/ntp-keygen /usr/bin
sudo cp ntpq/ntpq /usr/bin
sudo cp ntpdc/ntpdc /usr/sbin
sudo cp ntpdate/ntpdate /usr/sbin
sudo cp ntpd/ntpd /usr/sbin
sudo chown root:wheel /usr/bin/sntp
sudo chown root:wheel /usr/bin/ntp-keygen
sudo chown root:wheel /usr/bin/ntpq
sudo chown root:wheel /usr/sbin/ntpdc
sudo chown root:wheel /usr/sbin/ntpdate
sudo chown root:wheel /usr/sbin/ntpd
5) Open the system preferences - Date & Time - uncheck Set date and time automatically (to start the process)
6) Done.
-- update time manually
sudo ntpdate -u time.apple.com
-- check ntpd version (should now be: ntpd [email protected])
sudo ntpd --version

Can't remotely connect to my server if I automatically set date and time

Hello.
I have configured my OS X 10.6.2 server and am able to remotely manage it.
The only ports I have opened on my router is for Mail and VPN services.
Things work perfectly because I can connect using VPN to iChat, iCal, Address Book, Server Admin, Workgroup Manager, AFP, FTP and such.
The problem is that on my laptop from home, or wherever, if its time is set to update automatically from an NTP server (I have tried with Apple's as well as my server for the NTP Servers) then I cannot connect to my server at all...
The moment I turn off the auto date and time and reconnect to the office's VPN, I am able to use Server Admin, AFP, FTP, Workgroup Manager, Screen Sharing, etc, etc, etc.
It's utterly frustrating because I have to open system preferences, disable the automatic date and time update, connect to the VPN and do stuff on the server. Then I have to disconnect from VPN and re enable the auto date and time.
Could someone explain why this is happening and any possible solutions I might be able to try?
Thanks in advance,
Felipe.

OK, after some testing things seem to be working now.
I opened the NTP port for my server (So I don't have to be on VPN to update the time)....But regardless of that, Server admin and my corporate site work fine.
Here is my problem, I don't understand why it's working now when 30 minutes ago I was having trouble connecting to my server regardless of what NTP Server I used.
The only service I can't access is Workgroup Manager, but I don't know if that is supposed to be accessible only locally (though it doesn't matter since I can screen share but I would still like to know).
Thanks in advance,
Felipe.

Set Date and Time Automatically...doesn't

We've noticed that the setting to automatically synchronize date and time to Apple's time server doesn't work if the system preference is 'locked'
In other words, if the user that's logged in currently, isn't an admin user, then the machine doesn't set the date and time automatically.
As soon as you unlock the system preference by clicking the padlock at the bottom, the date and time sync as they should.
Anyone else noticed this?

We do want the clock correct. The issue here is that the internal clocks drift - as I understand it, this is the one of the main reasons behind using a network time server.
With the Date and time preferences set to 'Set date and time automatically', the but with the lock at the bottom corner locked- it's as though being locked is preventing the automatic date and time settings from updating.
But the preference is checked on, and so the clock should be 'resetting' itself as necessary.
To give an example- say the machine has been off for a while, and unplugged. This will cause the machine not to know what the Date and Time is. When the machine starts up, the preference should kick in, and the machine should 'Update date and time' automatically.
But it doesn't. So long as that padlock is locked, even though the preference is checked on, the machine will not alter the date and time - until the padlock is unlocked.

Inserting Date and Time into a date field

Okay I am a bit of a Oracle newbie. I am trying to insert the following date and time into a date field and I don't know how to format the second part of the to_Date() function.
Date/Time: 5/29/2003 7:58:45 PM
Thanks,
Branden

I believe you would want
to_date( '5/29/2003 7:58:45 PM', 'MM/DD/YYYY HH:MI:SS AM' )
Note that tahiti.oracle.com has all of Oracle's documentation, including the very useful SQL & PL/SQL reference manuals, available for free.
Justin

Help please on inserting date and time on iWeb

I am using iWeb '09 (which I love) to manage the website for our HomeOwners Assocation.
http://www.seabridgehh.com/seabridgehh.com/Home.html
I have downloaded a script to insert the current date and time - which works, but............
has anyone got a clue on how to re-format the font and colour please?

Julian:
This demo page has examples of date and time added to a page. The text versions are not self updating. The embedded flash version is. There may be a way to have the text version update every second or minute depending on what you have displayed but I've not found it in my searches to date:
OT

Not able to set date and time

I have a problem with automatic date and time will not initiate. I have wireless connection verified; my DHCP is properly configured, the latest i-Tunes software update, homesharing ID matched with computer and security firewall verified configured properly for allowing all incoming connections. Second Apple TV 2 bought in past two days where it will not update wirelessly. Is this a port problem, NTP, or related to software update that went wrong?
Contacted router vendor to troubleshoot their device. Verified with my computer, the wireless router works. Has anyone seen this problem before?
Thanks!

Welcome to the Apple Community.
If you have previously been able to use your Apple TV without this problem, you might try restarting the Apple TV by removing ALL the cables for a 30 seconds. if this doesn't help try a restore.

HT1551 trouble setting date and time

my power went out at home. when it came back on, appletv turns on, is connected to home wireless internet BUT can't access shows because the automatic "date and time" will not reset. FRUSTRATING. This occurred once before and I was able to correct it by hitting "restart" under settings. this "fix" isn't working this time.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Restart the Apple TV (Settings > General > Restart).
    2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    3.    Restart your router.
    4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    5.    Restore the Apple TV (Settings > General > Reset > Restore)

Inserting automatic file name, date and time in Illustrator CS3?

hello all,
is there an option in Illustrator where you could automatically insert inside your file the file name, date and time where it was last created or modified, etc.
I found this option to exist in InDesign, but could not find the same menu in Illustrator. I am using CS3.
help?
thanks a bunch.

Mario,
would you please be so kind to include a reference on your site about the script? As far as I can see, the PutDateandTime.js you are providing here is a copy or a slightly modified copy of the original script that Wolfgang Reszel has provided on our site for about four years.
It is okay that the script is available on your site, but please not without a reference. Thanks.

How to automatically update date and time on Numbers spreadsheet

Would like to have printed version of Numbers spreadsheet reflect present date and time. I know how to do this in Excel, but can't figure out how to get there in Numbers.

Add the date and time to the Header or Footer in the Print Dialog via the Insert menu.
It is only semi-automatic, in that to update the date and time, you must either delete and reinsert the date and time, or you must open the token and update by clicking the Set to Today button.
Jerry

Insert actual date and time

Hi forum,
I want to know if it is possible to insert for example like a field more but hidden the actual date and time, like in abap we use sy-datum...
The attribute visible of a inputfield:
visible Use this attribute to determine whether the input field should be visible or invisible, that is, whether or not the BSP element should be rendered in the BSP.
For example: visible = "X" ¿? (default¿?)
And to generate automatically what i have to do¿?
Thanks and regards!
Mon.
PD: Anybody knows any idea or suggestion about my last topic (tableview-onpinputprocessing)¿

Hi Eddy,
Finally i have used:
      <htmlb:inputField id             = "campo_fecha"
                         type           = "date"
                         required       = "true"
                         size           = "10"
                         showHelp       = "X"
                         value          = "<%= sy-datum %>"
                         visible        = "false" />
Thanks indeed for ur answer...
Regards,
Mon

Unable to insert date and time when using date datatype

Hi
I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
Thanks

user633278 wrote:
Hi
I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
ThanksYou most certainly can save the time. A DATE column, by definition stores date and time. What you describe is a presentation problem, and setting nls_date_format at the system as an init parm is the weakest of all settings as it is overridden by several other locations.
without seeing the exact sql that produced the error (not just your description of what you think you were doing) it is impossible to say for sure.
However, I'd suggest you read http://edstevensdba.wordpress.com/2011/04/07/nls_date_format/

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

Insert date and time into write to spreadsheet

Easy question here
I need save 4 arrays of data and insert the date and time that it was taken (LV 8.6)
for example
9/4/09 10:00:01 AM 4 6 7 2
9/4/09 10:00:02 AM 4 6 7 2
9/4/09 10:00:03 AM 4 6 7 2
9/4/09 10:00:04 AM 4 6 7 2
Any ideas, I can't wire the timestamp or date/time string right into the create array
Thanks
Chris
Solved!
Go to Solution.

Ok
the basic problem that I see is the the LabVIEW TimeStamp type is a cluster. Converting it to a dbl gives you a value in seconds elapsed since 1904 Jan 1 12:00AM GMT and, your spreadsheet cannot interprate that (or display that) as a "TIME." So, you want to convert it to a string (easy TS->String check the help for format options) BUT, you might want to pass all of your data as numbers into your spreadsheet so you can post-calculate or graph other outputs vs. TIME! This little chunk of code .....
converts a LV Timestamp to a number that Excel interperates as "the amount of days elapsed since 0 Jan 1900 @ 12:00AM LOCAL." You will need to format the cell in Excel to display it as a date-time But it can be operated on and graphed against with only Excel's limitations (Excel followed the Lotus bug of erroneously assuming 1900 was a leap year, and Leap seconds are unrecognized)
Enjoy!
Message Edited by Jeff Bohrer on 08-06-2009 02:28 PM
Jeff

Inserting an automatic Date and Time

Similar Messages

Maybe you are looking for