Inserting data into two tables

hi
i have two tables
table1
Column1.........................................     Column2
Primary key     ........................................Foreign key ref to column2 in table2
table2
col1............................................ ............... col2
foriegn key ref to col1 in tab1 ........................ primary key
now my question is how to insert data in to the two tables
thanks in advance
Edited by: [email protected] on Feb 15, 2009 12:13 PM

user_7000005 wrote:
now my question is how to insert data in to the two tablesBy defining the foreign keys as deferrable:
SQL> create table table1
  2  ( col1 int primary key
  3  , col2 int
  4  )
  5  /
Table created.
SQL> create table table2
  2  ( col1 int
  3  , col2 int primary key
  4  )
  5  /
Table created.
SQL> alter table table1 add constraint c1 foreign key (col2) references table2(col2) deferrable initially deferred
  2  /
Table altered.
SQL> alter table table2 add constraint c2 foreign key (col1) references table1(col1) deferrable initially deferred
  2  /
Table altered.
SQL> insert into table1 values (1,1)
  2  /
1 row created.
SQL> insert into table2 values (1,1)
  2  /
1 row created.
SQL> commit
  2  /
Commit complete.Regards,
Rob.

Similar Messages

  • How to insert data into two tables at once using XSJS

    Hello Experts,
    My requirement is to insert data into two tables at once. I have a XS JS app and want to update these tables via xsjs. How can I do this ?
    Is there any mechanism like sql 'transactions' also in Hana ? If yes, how can I call it via xsjs ? If not, what are the ways to populate two different tables at once.
    Please advice. Any help is really appreciated.
    Thanks !

    There is nothing special about inserting into two tables at once in XSJS. Just issue two separate SQL Statements.  Don't execute the COMMIT until after both commands.  That way they are all one transaction.

  • How to insert data into two tables linke with foreign key..

    I have two tables
    1)EMP(emp_ID,username,emp_type_code)
    emp_ID is primary key, emp_type_code is a foreign key references emptype table.
    2)emptype(emp_type_code,emp_type_descripton)
    emp_type_code is primary key
    Could anyone help me ..how to insert data into EMP table. How to insert data into two tables linke with foreign key..

    CREATE TABLE "CATDB"."DWDIMUSER"
    "USER_ID" NUMBER(10,0) NOT NULL ENABLE,
    "SPECIALTY_ID" NUMBER(10,0),
    "FULLNAME" VARCHAR2(20 BYTE),
    "FNAME" VARCHAR2(20 BYTE),
    "LNAME" VARCHAR2(20 BYTE),
    "USER_SUBTYPE" VARCHAR2(20 BYTE),
    CONSTRAINT "DIMUSER_PK" PRIMARY KEY ("USER_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE,
    CONSTRAINT "DIMUSER_DIMSPECIALTY_FK" FOREIGN KEY ("SPECIALTY_ID") REFERENCES "CATDB"."DWDIMSPECIALTY" ("SPECIALTY_ID") DISABLE
    CREATE TABLE "CATDB"."DIMSPECIALTY"
    "SPECIALTY_ID" NUMBER(10,0) NOT NULL ENABLE,
    "SPECIALTY_NAME" VARCHAR2(100 BYTE),
    CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("SPECIALTY_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
    INSERT INTO DIMUSER (FullName, FNAME, LNAME, USER_TYPE, USER_SUBTYPE)
    SELECT DISTINCT
    Engineer AS FullName,
    regexp_substr(Engineer , '[^,| ]+', 1, 1) as FName,
    regexp_substr(Engineer , '[^,| ]+', 1, 2) as LName ,
    'Engineer'
    FROM EMPLOYEELOOKUP;
    INSERT INTO DIMSPECIALTY (SPECIALTY_NAME)
    SELECT DISTINCT SPECIALITY
    FROM EMPLOYEELOOKUP;
    COMMIT;
    CREATE TABLE employeelookup ...IS A TABLE THAT HAS ALL THE DATA NEDED TO BE FILLED IN BOTHE TABLES...
    CREATE TABLE "CATDB"."EMPLOYEELOOKUP"
    "EMPLOYEELOOKUP_ID" NUMBER(10,0) NOT NULL ENABLE,
    "ENGINEER" VARCHAR2(25 BYTE),
    "SPECIALTY" VARCHAR2(20 BYTE),
    CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("EMPLOYEELOOKUP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
    DATA IN EMPLOYEELOOKUP
    Engineer, Specialty,
    John, Dow, Electronis,
    Dow, Jons, Technician
    Stan Smithers Sales
    Mark, Richards Marketing
    Jenny, Lane Marketing
    John, Lee Sales
    I NEED TO LOAD THE FOREIGN KEY IN DIMUSER FROM THE DIMSPECIALTY TABLE?
    BY USING THE LOOKUP TABLE TO MARCH THE NAMES UNDER THE Engineer COLUMN, SPECIALTY COLUMNE DISTICTIVLY BY JOINING THE DIMSPECILTY TO RISTIVE THE PRIMARY KEY AND FILL IT IN THE DIMUSER TABLE AS A FOREIGNE KEY.

  • Insert the data into two tables at a time.

    Hi ,
    i have these two tables
    create table [dbo].[test1](
    [test1_id] [int] identity(1,1) primary key,
    [test2_id] [int] not null
    create table [dbo].[test2](
    [test2_id] [int] identity(1,1) primary key,
    [test1_id] [int] not null
    alter table [dbo].[test1]
    add constraint [fk_test1_test2_id] foreign key([test2_id])
    references [dbo].[test2] ([test2_id])
    alter table [dbo].[test2] add constraint [fk_test2_test2_id] foreign key([test1_id])
    references [dbo].[test1] ([test1_id])
    I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
    Thanks in advance.

    You can INSERT into both tables within one Transaction but not in one statement. By the way, you would need to alter your dbo.Test1 table to allow null for first INSERT test2_id column
    See sample code below:
    CREATE TABLE #test1(test1_ID INT IDENTITY(1,1),test2_id INT NULL)
    CREATE TABLE #test2(test2_ID INT IDENTITY(1,1),test1_ID INT)
    DECLARE @Test1dentity INT
    DECLARE @Test2dentity INT
    BEGIN TRAN
    -- Insert NULL as test2_ID value is unknown
    INSERT INTO #test1(test2_ID)
    SELECT NULL;
    -- get inserted identity value
    SET @Test1dentity = SCOPE_IDENTITY();
    INSERT INTO #test2(test1_ID)
    SELECT @Test1dentity;
    -- get inserted identity value
    SET @Test2dentity = SCOPE_IDENTITY();
    -- Update test1 table
    UPDATE #test1
    SET test2_ID = @Test2dentity
    WHERE test1_ID = @Test1dentity;
    COMMIT
    SELECT * FROM #test1;
    SELECT * FROM #test2;
    -- Drop temp tables
    IF OBJECT_ID('tempdb..#test1') IS NOT NULL
    BEGIN
    DROP TABLE #test1
    END
    IF OBJECT_ID('tempdb..#test2') IS NOT NULL
    BEGIN
    DROP TABLE #test2
    END
    web: www.ronnierahman.com

  • Insert data into multiple tables

    Hi all,
    I've a requirement where i need to insert data into multiple tables using PL/SQL procedure
    Procedure should have two parameters
    1. Table Name (parameter1)
    2. Data (parameter2)
    Based on these two parameters i need to insert data into table (parameter1) using data (parameter2)
    ex:
    Procedure insert_data (p_table  IN VARCHAR2
                          ,p_data   IN -- what should be the datatype?
    IS
    l_statement VARCHAR2(2000);
    BEGIN
    -- insert data into tables
    INSERT INTO p_table
    values (....);
    END insert_data;Thanks in advance!!

    BEDE wrote:
    Amen to that!
    So, I believe a better approach would be the following...
    Suppose you have N datafiles with the same structure, and you wish to insert into the database the data from all those files.
    For that, you should have a single table, named, say incoming_file_data, which should be structured more or less like below:
    create table incoming_file_data (
    filename varchar2(250) not null -- name of the file inserted from
    ,file_time timestamp -- timestamp when the data was inserted
    ,... -- the columns of meaningful data contained in the lines of those files
    );And you will insert the data from all those files in this table, having normally one transaction for each file processed, for otherwise, when shit happens, some file may only get to be partially inserted into the table...
    Maybe one good approach would be to create dynamically an external table for the file to be loaded, and then execute dynamically insert select into the table I said, so that you will have only one insert select for one file instead of using utl_file... RTM on that.If the file structures are the same, and it's just the filename that's changing, I would have a single external table definition, and use the alter table ... location ... statement (through execute immediate) to change the filename(s) as appropriate before querying the data. Of course that's not scalable if there are multiple users intenting to use this, but generally when we talk about importing multiple files, it's a one-user/one-off/once-a-day type of scenario, so multi-user isn't a consideration.

  • How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

    I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
    If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
    What is the best way to do it without increasing overheads?

    This view works:
    SELECT
    i.IDNO,i.[Date],i.[Level]
    FROM
    mytable i
    INNER
    JOIN mytable
    d
    ON
    d.IDNO
    = i.IDNO-1
    WHERE
    i.[Level]
    <> d.[Level]
    on this mytable below.  A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable).  mytable below
    should give 3 lines. The IDNO is an identity column.
    IDNO
    Item
    Date
    Level
    1
    X24
    12/23/13 10:41
    22996
    2
    X24
    12/23/13 10:41
    22996
    3
    X24
    12/23/13 9:21
    23256
    4
    X24
    12/23/13 9:21
    23256
    5
    X24
    12/23/13 9:22
    23256
    6
    X24
    12/23/13 9:22
    23256
    7
    X24
    12/23/13 9:22
    22916

  • How to insert data into a table from an xml document

    using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
    if i use the xmlgen.insertXML(....)
    requires a CLOB file, which i dont have, only the xml doc.
    Cant i insert directly from the doc to the table?
    the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
    Isnt there any other way?

    Your question is little perplexing.
    If you're using XML SQL Utility from
    the commandline, just use putXML.
    java OracleXML putXML
    null

  • Inserting Data into nested table

    I am exploring the differences between OBJECT & RECORD.
    As i am still in process of learning, I found that both are structures which basically groups elements of different datatypes or columns of different datatypes, one is used in SQL and other is used in PL/SQL, please correct me if I am wrong in my understanding.
    Below i am trying to insert data into an table of type object but i am unsuccessful can you please help.
    CREATE OR REPLACE type sam as OBJECT
    v1 NUMBER,
    v2 VARCHAR2(20 CHAR)
    ---Nested Table---
    create or replace type t_sam as table of sam;
    --Inserting data----
    insert into table(t_sam) values(sam(10,'Dsouza'));
    Error Message:
    Error starting at line 22 in command:
    insert into table(t_sam) values(sam(10,'Dsouza'))
    Error at Command Line:22 Column:13
    Error report:
    SQL Error: ORA-00903: invalid table name
    00903. 00000 -  "invalid table name"
    *Cause:   
    *Action:

    Ariean wrote:
    So only purpose of equivalent SQL types concept of nested tables is to use them as one of the data types while defining an actual table?
    Sort of - you can definitely use them for more than just "defining an actual table". (I'm fairly certain you could pass a nested table into a procedure, for example - try it, though - I'm not 100% sure on that - it just "makes sense". If you can define a type, you can use it, pass it around, whatever.).
    Ariean wrote:
    And that nested table could be a record in SQL or an Object in PLSQL or just simple datatype(number,varchar etc)?
    Nested tables are just like any other custom data type. You can create a nested table of other data types. You can create a custom data type of nested tables.
    It could get stupidly .. er, stupid O_0
    CREATE TYPE o_myobj1 AS object ( id1   number, cdate1  date );
    CREATE TYPE t_mytype1 AS table of o_myobj1;
    CREATE TYPE o_myobj2 AS object ( id2   number,  dumb  t_mytype1 );
    CREATE TYPE t_dumber AS table of o_myobj2;
    O_0
    Ok, my brain's starting to hurt - I hope you get the idea
    Ariean wrote:
    Secondly is my understanding correct about OBJECT & RECORD?
    I can't think of any benefit of describing it another way.

  • How do I run a database procedure that inserts data into a table from withi

    How do I run a database procedure that inserts data into a table from within a Crystal report?
    I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department.  However, I'd like to know when a particular report is run and by whom.  To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called.  The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC.  How can I call this procedure from within a report when it's run and provide it with the 2 parameters?  I know the procedure works, I just can't figure out how to call it from with a report.
    I'd be grateful for any help.
    Colin

    Hi Colin, 
    Just so I'm clear about what you want: 
    You have a Stored procedure in your report.  When the report runs, you want that same procedure to write to a table called Report_Log. 
    If this is what you want the simple answer is cannot be done.  Crystal's fundamental prupose is to read only, not write.  That being said, there are ways around this. 
    One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed.  This would be the most efficient.
    The other way would be to have an application run the report and manage the entry. 
    Good luck,
    Brian

  • Is it possible to insert data into two Excel worksheets using Report Generation Toolkit?

    I'm using the toolkit to insert data into two separate worksheets in Excel using named cells. The problem is that it tends to favor one sheet or the other. In other words, one sheet will have data and the other no data and vice versa. (Sometimes I get data in both sheets.) Is there something I can do to clear this up or is what I'm trying to do unreasonable? I would like to use two worksheets so one sheet receives text and data. The other sheet is used to format the data into a printable report. (i.e. using Excel's CONCATENATE function) The second (report) sheet is also used to receive plots (JPEG files) from LabVIEW. I'd send the plot images to the first sheet, but I can
    not see a way to automatically transfer images from sheet to sheet. I'm using LV 7.1, Win2000 and Toolkit v.1.0.1

    Hi,
    You can use the "Excel Get Worksheet.vi" under All Functions >> Report Generation >> Excel Specific >> Excel General to specify a particular worksheet as the current worksheet. Then, you can specify which worksheet you want to write to in your VI.
    Let me know if you have any further questions and good luck!
    Kileen C.
    NI

  • Error while inserting data into a table.

    Hi All,
      I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
    Thanx in advance
    anirudh

    Hi Anirudh,
      Seems there is already an entry in the Table with the same Primary Key.
    INSERT Statement will give short dump if you try to insert data with same key.
    Why dont you use MODIFY statement to achieve the same.
    Reward points if this Helps.
    Manish

  • Its very urgent:how to insert data into database tables

    Hi All,
    I am very new to oaf.
    I have one requirement data insert into database tables.
    here createPG having data that data insert into one custom table.
    but i dont know how to insert data into database tables.
    i wrote the code in am,co as follows.
    in am i wrote the code:
    public void NewoperationManagerLogic()
    ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
    OADBTransaction oadbt=getOADBTransaction();
    if(!vo1.isPreparedForExecution())
    vo1.executeQuery();
    Row row=vo1.createRow();
    vo1.insertRow(row);
    in createPG processrequest co:
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
    am.NewoperationManagerLogic();
    process form request:
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    if(pageContext.getParameter("Submit")!=null)
    ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
    am.getOADBTransaction().commit();
    please help with an example(sample code).
    its very urgent.
    thanks in advance
    Seshu
    Edited by: its urgent on Dec 25, 2011 9:31 PM

    Hi ,
    1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
    2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
    3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
    You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
    Thanks
    Pratap

  • Insert data into nested tables

    Hi,
    Can someone please advice how can I insert data into nested tables using APEX.
    I have a table "employee" and a column addresses of type address_table_type object which has address1, address2, address3 columns. I want to create form in APEX that will collect address1, address2, address3. I wonder how to do this? should the item be based in database item? if yes then how can I point to the column of address_table_type
    Thanks
    --Aali                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Can you post your tabB type, sample data, and your exact insert statement?
    Is it overwriting or not commiting the inserts?
    Have you traced your session to see what is happening?

  • Insert data into fact table from source database tables

    here i try to insert data into fact table from source database tables here is the query 
    ALTER procedure [dbo].[facttable]
    as
    insert into [pp dw].dbo.Dimfact(Prod_ID,Production_ID,Material_ID,Equip_ID,WC_ID,Recipe_ID,Quantity,costprice)
    select Products.[Product ID],[Production ID],Materials.[Material ID],[Equipment ID],[Work Centre ID],[Recipy ID],Quantity,[cost price]
    from
    [PRODUCTION PLANNING 2].dbo.[Products],
    [PRODUCTION PLANNING 2].dbo.[Production Detail],
    [PRODUCTION PLANNING 2].dbo.[Material category],
    [PRODUCTION PLANNING 2].dbo.[Materials],
    [PRODUCTION PLANNING 2].dbo.[Equipment],
    [PRODUCTION PLANNING 2].dbo.[Working Centre] ,
    [PRODUCTION PLANNING 2].dbo.[Recipies]
    where
    Products.[Product ID] in (13, 14, 15, 16, 17) and
    [Production Detail].[Production ID] in (1, 2, 3) and
    [Materials].[Material ID] in (1, 2, 3, 4, 5) and
    [Equipment].[Equipment ID] in (1, 2, 3, 4) and
    [Working Centre].[Work Centre ID] in (1, 2, 3) and
    [Recipies].[Recipy ID] in (1, 2, 3) and
    [Material category].[Category ID] in (8, 9, 10, 11, 12, 13)
    and when i execute query it shows me error 
    The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dimfact_Dimproduct". The conflict occurred in database "pp dw", table "dbo.Dimproduct", column 'Prod_ID'.
    ERD IS
    HOW TO SOLVE THIS PROBLEM?

    I cant see any join conditions in your query posted. Whats the purpose of the query above. It will just bring you a cartesian product (cross join) of tables involved subjected to filters. Are you sure this is the correct query?
    The error you're getting may be because you've not yet populated DimProduct or may be because of logic you used in popultaing DimProduct causing it to miss some records which is what query is referring to in above case.
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Insert data into linked table

    Problem when you try to insert data into linked table.
    I made the view with all linked table columns (field1 is PK, field2, field3......) plus new primary key field "field1_PK" for tabular form wizard primary key field definition. After submit data on tabular form appears:
    "Error in mru internal routine:ORA-2001:Error in MRU: row=1,ORA-00957: duplicate column name ORA-02063:preciding line from "SHEMA_NAME", insert into "field1","field1_PK","field3",........) values (:b1,:b2,:b3.........)
    Error Unable to process update.
    Is it bug too?

    Hi,
    Have you tried to do your updates using an INSTEAD OF TRIGGER on your view? An INSTEAD OF TRIGGER allows you to update a non-updateable view.
    The following book contains an excellent introduction to this topic.
    "Oracle PL/SQL for Dummies"
    written by Rosenblum and Dorsey
    published by Wiley Publishing Inc.
    The following book is also excellant reference that deals with INSTEAD OF TRIGGERS.
    "Oracle PL/SQL programming
    written by Steven Feuerstein
    published by O'Reilly
    Hope this helps.
    Cheers,
    Patrick Cimolini

Maybe you are looking for

  • How to get total number of rows return by query

    hi all i am using forms 6i with oracle 10G in windows environment.... i have a tabular form now i want to know that how many rows return by the query...like when user click on enter query and then give any search criteria and then execute query..it d

  • Save enhancement utilities

    I used to have a utility that gave extra options in the save dialogue box that also placed a thumb nail image of a PDF in the finder window. Apple implemented Thumb nails in the finder and I stoped using it. However one of the great things it did was

  • Problem with a patch for Creative Media Explorer for Ze

    Has anyone had any problems with their PC (rebooting itself after install and getting a blue screen) when downloading and installing the update for Creative Media Explorer for Zen M to fix the album art problem for WMP?I downloaded this update per a

  • Could not load file or assembly 'Oracle.ManagedDataAccessDTC'

    I'm a little bit stuck... I've been trying to replace System.Data.OracleClient in my application for a while now, and was very encouraged to see a managed DLL option. I have followed the quick start instructions in the readme file, but my site return

  • Certificate Error for second server in collection

    I'm running 2012 R2 RD Services. I have Two RD Session hosts: HostRDP1.domain.local HostRDP2.domain.local The External DNS entry is: rdp.mydomain.com I have a wildcard certificate applied to both servers (*.mydomain.com) I have the two servers setup