Inserting dynamic image doesn't work for range of records
Hi,
I'm using BI Publisher 5.6.3 and E-business Suite 12.1.3.
I have set up my RTF template so that it brings in a logo image dynamically onto an invoice.
The code in the "alt text" field behind my dummy image is: url:{concat('${OA_MEDIA}/',//CF_LOGO)}
The image is within a repeating loop that loops around the invoices chosen.
It works fine if I run the concurrent request for a single invoice - the correct logo image is shown.
However if I run the concurrent request for a range of invoices which should contain a mixture of both logos it doesn't work and prints the same logo for each invoice regardless of what it should be displaying.
For testing purposes I also output the name of the image, field CF_LOGO (which is calculated in a formula in the RDF file) just before the actual image, and this always displays the correct value even for a range of invoices. As you can see above this is the field that I include in the code to obtain the image.
Does anyone have any idea why a range of invoices will only display one logo image?
Many thanks for any suggestions.
Regards,
Hazel
It's a bug in MDM 5.5 SP04. The fix is in MDM 5.5 SP05.
Similar Messages
-
Dynamic versioning plugin tag doesn't work for Netscape using 1.4.1_01?
When I use dynamic versioning for plugin, for example:
<EMBED
type="application/x-java-applet;version=1.4.1_01"
>
It doesn't work for netscape 7. Although 1.4.1_01 was installed on the machine, the applet was not able to be loaded. Plugin was not found.
Anything wrong with the tag? It is OK for 1.4.1
ThanksWhen I use dynamic versioning for plugin, for
example:
<EMBED
type="application/x-java-applet;version=1.4.1_01"
>
It doesn't work for netscape 7. Although 1.4.1_01 was
installed on the machine, the applet was not able to
be loaded. Plugin was not found.
Anything wrong with the tag? It is OK for 1.4.1
ThanksI lost alot of sleep over this!
I finally got it to "seemingly" work
but by NOT using 1.4.1 attribute..
See my HTML example
http://hyperbyte.ab.ca/JavaZone/
While it doesn't work with the 1.4.1
attribute it does work with Netscape
Good Luck!
Sincerely:
Tony Swain
Senior V.P. of Software Development Hyperbyte inc.
http://www.hyperbyte.ab.ca
Netscape DevEdge Champion Devs-Java Newsgroup
snews://secnews.netscape.com/netscape.devs-java -
Filter doesn't work for filter-servlet name mapping
Filter doesn't work for filter-servlet name mapping.
it only works for filtering url-pattern.
Does anybody has some idea?
BTW, does anybody know if filter will be invoked when
call RequestDispatcher.include/forward?
Version: WLS6.1 SP1 on solaris.
Thanks a lot.
Heng
The Filter defined will only be run in the context that it is defined in. Since you are creating a new context, you will have to assign a new Filter. BTW, why not include the static content in the WAR with the dynamic stuff?
-
SafeSleep doesn't work for Mac mini
I use Mac mini (Mid 2011) with hibernatemode=3.
But my Mac doesn't reboot from sleepimage afer I unplug the power cord. I mean SafeSleep doesn't work for my Mac. It boots normally but every program is initialized.
It is strange that I very rarely watch the very moment that my Mac's progress bar when rebooting from SafeSleep successfully.
Please help me to use SafeSleep and to save energy.
I am sure settings are correct and sleepimage is made by the following commands.
$ ls -l /private/var/vm
total 8519680
-rw------T 1 root wheel 4294967296 9 9 18:01 sleepimage
-rw------- 1 root wheel 67108864 9 9 18:02 swapfile0
$ pmset -g
Active Profiles:
AC Power -1*
Currently in use:
hibernatemode 3
womp 0
networkoversleep 0
sleep 10
powerbutton 1
ttyskeepawake 1
hibernatefile /var/vm/sleepimage
autorestart 0
disksleep 10
displaysleep 10Don't be too dismayed that you can't take advantage of Hibernate the way you did in the past on your PCs. See this chart:
(from here: http://images.apple.com/environment/reports/docs/macmini_per_july2011.pdf)
At most, you're drawing 1.16W in Sleep. For me, that amounts to a cost of about 10p every fortnight. If it's the environmental effects that concern you, further reading of the PDF should show you've got one of the most environmentally-friendly home computers money can buy.
I hope that puts your mind at ease. -
[kde] "Only show tasks from the current desktop" doesn't work for max
Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS) -
My mic for my iPhone 4S only works on speaker phone and doesn't work for Siri. What can I do?
My mic on my 4s only works on speaker phone in calls. It also doesn't work for Siri or voice memos. Is there any way to fix this without having to buy new parts or exchange it?
Hello there, mbrda92.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly of note:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Pickup Clock doesn't work for markers. Any alternatives?
Hello everyone,
It seems that Pickup clock doesn't work for markers (I guess markers are not considered an "event.") Is there a way to move markers as quickly as I do "event" data with pickup clock; e.g. a key command that allows you to write the location start time of your markers? Or even better, a way to move all data within locators to different song positions quickly?
I'm scoring a film and trying to break down my master "spotting" session (in which I placed markers at the beginning of each cue) into separate files. Moving "events" is easy, as I just separate at the marker using "cut at spl" select all following, move SPL to bar 1, and use pickup clock. However, no "global track" data seems to move via pickup clock. Is there an easier way to achieve my goal?
Thanks in advance for your help!musicspirit wrote:
Is it that you want to move Global components that fit with a particular cue ( such as Volume Automation etc) around in the same Song? ie try one piece of music over two different scenes in the film? Or shift an entire cue slightly sooner or later against the picture?
YES!! This would be AMAZING if I could do this easily. As a work around I change the actual movie and of the dialog / sound FX tracks, which can take some time to get them correct and leaves you with multiple song files. It would be much easier if there was a way to grab everything within your Left and Right Locators, and be able to move it around, copy and paste, etc.
I tried experimenting with Split/Cut/Insert Time and a segment of regions which included some volume/fader changes - no dice. Logic can copy automation vertically track to track but not in a Linear way.. though I may be speaking in complete ignorance.
I'm going to read up on Split/Cut Time as well, as this maybe the key. As for your automation issues, I know logic will not copy / paste automation when there is no "node," (i.e. if you are cutting on bar 5, but the last node was on bar 3 and the next on bar 7, it will not "go back to 3" to get the proper levels) so in the past I have placed nodes on the beginning and end of the section I want to copy, and the automation then copied fine. Of course if you have a lot of automation, it can be a PITA to place nodes in each track, but it does seem to work. Hope that helps! -
The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
Sorry, I've forgotten the actions done.
I've restarted the iphone, and I've recovered a previous backup.
Thanks. -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.
download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear
-
I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.
Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception -
Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j
Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
SaiIn a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible). -
Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.
Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP
Maybe you are looking for
-
Weather App Affecting my Data Usage
Hi Community, Back in October 2013 when I changed my IPhone from a 4S to a 5S I had to go from an “Unlimited” plan to Tiered plan. I went to a tiered planned capped at 2 GB per billing cycle. This didn’t bother me because I would never use all of m
-
I upgraded to Mountain lion. I could not open any of my word documents so i downloaded Libre Office. It is downloaded but how do I get it to work with my old documents??
-
Strange error in BAPI_BUSINESS_PARTNER_CHANGE
Hello, trying to use the function module BAPI_BUSINESS_PARTNER_CHANGE i get very strange error. I try to change the authorization group of the Business Partner, so no tables parameters except return are filled. All of obligatory fields are filled wit
-
I have an iphone 6 which says it has Airdrop. I have a brand new iMac (as of yesterday) that also has airdrop in finder. On the iMac I clicked on Airdrop in Finder and it searched for someone to drop with and it isn't finding my phone. I just read th
-
Anyone know how to view my iphone pics on my stupid pc?
anyone know how to view my iphone pics on my stupid pc?