Inserting images in forum message?

Hi,
Is it possible to insert attached images inline in the forum messages (similar to what you can do in the wiki pages)
We in our organization are using forum which comes with portal.
Regards,
Amit

Hi Amit,
its not possible to insert images in forum text, but you can attach images,docs to the forum message. To change attached files size,number of attachments and type you should have forum administrator role.
Forums come with portal are jive forums , you can check administration guides on jive forums in Google.
Regards,
Mahesh.

Similar Messages

Inserting an image to a message post or attaching images to a post or creating a gallery

Hi:
I'm trying to either attach an image to a message post or insert it in-line with a message. I've read several references to this ability perhaps being something that will happen "soon", but those messages that refer to this are dated in August of 2009. Here it is December and I still can't figure out how.
The online help says very clearly:
How do I insert an image in a post?
You insert an image the same way as you did before, but now you have more choices about where the image comes from and how it looks. You can insert an image from your computer (this uploads the image to your gallery), from your image gallery (if the image has been approved), or from another location on the Web.
To insert an image in a post:
Start a new post.
You can insert images anywhere: in messages, replies, blog articles, ideas, or comments.
Click the Insert Image button in the editor's tool bar (it looks like a tree).
Well, I don't know how you could do it "before", but there is no "Insert Image" button in the editor's toolbar at all.
There are also messages in this forum that say you can paste from a Word document (there IS a "Paste from Word" icon on the toolbar.) However, when I paste from word, the images in my Word document are lost.
Finally, I thought I'd post the images in a gallery. Again the online help says:
To upload an image to your image gallery:
Go to your Profile page and click the View Image Gallery link.
Click Browse to select an image file to be uploaded.
If the image is small enough (the size limit is set by your community), the image is uploaded. A preview of the image appears so that you can make sure you uploaded the right image.
There is no "View Image Gallery" link on my profile page.
Now, I am a computer consultant and therefore (hopefully) very computer-savvy, so this is not an issue with me being a forum "novice." But I've always had issues with help documents that say "click on this icon" and don't show a screenshot of where the icon is.
And, I can't PROVE that my profile page doesn't have a gallery link because I can't upload a screenshot! <grin>.
So, can anyone clarify if and how we can upload images? Or if there is a definitive help document that lays this out, provide a link to that document? The help "search" function is pretty weak, because it does a FORUM search on any term you type in, rather than restricting it to help documents.
There's also some references to having to be a "silver member" in order to upload images, but no information on what is required to become such a member.
Thanks
Ron

As stated in the Community Ranking Structure post on the Announcements section:
Many community members will ask (and have asked in the past) exactly what the criteria is for achieving each rank in the hierarchy. To eliminate the likelihood of system abuse or forum ‘rank climbing’, we have decided not to publicize the exact ranking criteria. That said, community members will gain higher ranking by excelling in the activity components below. The list is not in order of importance and some elements are weighted greater than others.
Kudos Given
Kudos Received
Length of Time on the Community
Number of logins
Posts marked as “Accepted Solution”
Total number of Posts (minus deleted posts)
Total Number of Tags applied throughout community
Time spent online in the Community Forums
As members achieve higher rankings within the Community Forums, they will automatically receive additional functionality – while maintaining the functionality rights previously achieved.
This is done to prevent spamming and trolling of the forums and to prevent objectionable content from being uploaded to the site. There are legal issues involved with this and it preserves the integrity of the forums to grant certain permissions at certain ranks.
The ranking structure undergoes periodic review and this may change in the future -- but no guarantees.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Insert image - HTTP error

I've been using Firefox (now 24.0) to browse NI forum and I've never been able to insert images in my messages, and so I always include them as attachments.
I select "Insert/edit image" icon
I select "From My computer >> Browse"
I point to the image file and I get "Error Code: HTTP Error"
Probably there is something I miss, but I don't know what.
Could someone help me, please?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

vix wrote:
Yes, I'm able to attach files to the message, but your approach seems me a little bit long...
Maybe, but it also keeps my picture library clean.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Unable to view in line images embedded in forum messages

Using Firefox 4.01 on win 7 - 64
Viewing a Yahoo forum message the in line images are not visible to me but other users do see them (do not know which browser they use)
I can see the images as attachments - just not when embedded in the message body

*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Why is "insert image" greyed out in "post new thread" in this forum?

I really need to attach a screenshot to show someone what
Acrobat Pro is doing but "insert image" is greyed out.
Any ideas?
Thank you.

gelbuilding wrote:
This is ridiculous, we need to be able to post images
to easily exchange info with one another to show what issues we have.
Wasting too much time trying to explain, rather that showing a pic to easily determine whats happening and most of all for others to learn easily what is the resolution, learning from others.
It's quite ridiculous to follow up with a rant on a post 3 years old. The text "insert image" has been gone for a couple of years now -- perhaps it was there in a previous version of the forum software.
Nowadays (2011 AD) we use the "insert image" button:

Unable to insert images in this forum using Mac OS

I was unable to insert images using safari or firefox. I can navigate to the desired image but cannot choose it (its grayed out).
Tried files with different extensions such as .png .jpg .jpeg .tiff .bmp but to no avail.
Any ideas?

Hi guys,
I'm testing this with my Mac.
Cheers!
KarlaDJR
Attachments:
hp-envy-17-3d.jpg ‏50 KB

Unable to insert image in editor

When I try to insert images in the text editor, by clicking the "insert image icon", a black box appears with the "insert image" message in the top left corner of the box and the close button (X) in the top right hand corner. However, the "insert video" option works OK. Can anyone help me to resolve this problem?

I am referring to the editor used for posting questions etc in Adobe Forums. That is, the editor I am now using to post this reply to you. I have explained as clrearly as I can what happens when I click the icon, which allows for the insertion of images. I hope I have provided a better understanding.

Problem inserting images Dreamweaver CS3

Hi, I have Dreamweaver CS3 and Dreamweaver MX 2004 loaded on
the same machine, iMac G5. My OS is 10.4.10 Tiger and all updates
are current. No particular reason, just never got around to
uninstalling the latter. Here's the problem in CS3, but not MX
2004. I can't insert images into my HTML page by any of the
following methods: insert menu at the top of the screen, or click
and drag the file. Copy and pasting the code from another page
won't even work. The only way it works is by typing in the raw code
into code view. I get a strange warning when I try to copy and
paste: something like Java script error. I thoroughly checked my
mark-up and there's no a single speck of Java Script anywhere. I've
also get other strange warnings while trying to put in images:
floating bugs.html, margin bugs.html, and others (sorry this is not
verbatum, but you get the idea). I've tried shutting dowm the
computer and rebooting, but that didn't help either. When I
switching over to MX 2004, same files, I was able to insert images
in all of the various ways mentioned above. So I'm thinking, maybe
I should uninstall Dreamweaver CS3, and reinstall from disk. So, I
did the uninstall, and emptied my trash, but haven't reinstalled
yet. Thought that I should run this by the forum first. thanks for
any help. Yesterday I got multiple sudden unexpected "quits" while
using both versions, losing unsaved work. thanks for any
suggestions, Deborah North

Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dnorth" <[email protected]> wrote in
message
news:feinqm$173$[email protected]..
> Hi, I have Dreamweaver CS3 and Dreamweaver MX 2004
loaded on the same
> machine,
> iMac G5. My OS is 10.4.10 Tiger and all updates are
current. No particular
> reason, just never got around to uninstalling the
latter. Here's the
> problem in
> CS3, but not MX 2004. I can't insert images into my HTML
page by any of
> the
> following methods: insert menu at the top of the screen,
or click and drag
> the
> file. Copy and pasting the code from another page won't
even work. The
> only way
> it works is by typing in the raw code into code view. I
get a strange
> warning
> when I try to copy and paste: something like Java script
error. I
> thoroughly
> checked my mark-up and there's no a single speck of Java
Script anywhere.
> I've
> also get other strange warnings while trying to put in
images: floating
> bugs.html, margin bugs.html, and others (sorry this is
not verbatum, but
> you
> get the idea). I've tried shutting dowm the computer and
rebooting, but
> that
> didn't help either. When I switching over to MX 2004,
same files, I was
> able to
> insert images in all of the various ways mentioned
above. So I'm thinking,
> maybe I should uninstall Dreamweaver CS3, and reinstall
from disk. So, I
> did
> the uninstall, and emptied my trash, but haven't
reinstalled yet. Thought
> that
> I should run this by the forum first. thanks for any
help. Yesterday I got
> multiple sudden unexpected "quits" while using both
versions, losing
> unsaved
> work. thanks for any suggestions, Deborah North
>

Inserting images in a collapsible panel

Can anybody help with a problem about inserting an image into
the tab of a collapsible panel as a visual clue to users that they
can open/close the panel? I'm trying to ensure that users don't
just see the tab of the panel as a kind of good looking heading but
that the images (two - one for open, one for closed) would give a
visual clue that the tab actually opens when clicked.
I'd be very grateful for any help, thanks, st44

By managing the table's default cellpadding and cellspacing.
Are you
setting them to zero?
If that's not happening then we would need to see your code.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"OxfordFishSalon" <[email protected]> wrote
in message
news:fulior$9i1$[email protected]..
> When I insert images in a table and align them right,
for example, there
> are
> still a few pixels between the edge of the table and the
image on the top
> and
> right.
>
> How do I make an image go to the absolute edge of a
table?
>
> Thanks,
> Chris
>

Inserting Images in a Table

When I insert images in a table and align them right, for
example, there are still a few pixels between the edge of the table
and the image on the top and right.
How do I make an image go to the absolute edge of a table?
Thanks,
Chris

By managing the table's default cellpadding and cellspacing.
Are you
setting them to zero?
If that's not happening then we would need to see your code.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"OxfordFishSalon" <[email protected]> wrote
in message
news:fulior$9i1$[email protected]..
> When I insert images in a table and align them right,
for example, there
> are
> still a few pixels between the edge of the table and the
image on the top
> and
> right.
>
> How do I make an image go to the absolute edge of a
table?
>
> Thanks,
> Chris
>

Inserting images in divtags

Have 2 adjacent divtags one above the other with zero margin
between. I click inside top one and insert image. Then try to click
inside lower one to insert another image but cursor does not
appear. I can select the div by clicking its border but can't
select inside of it to get a cursor.

Can you place your cursor within the DIV in Code View, and
then insert your
image?
<DIV>|</DIV>
"farleysan" <[email protected]> wrote in
message
news:fj29uc$h4l$[email protected]..
> Have 2 adjacent divtags one above the other with zero
margin between. I
> click
> inside top one and insert image. Then try to click
inside lower one to
> insert
> another image but cursor does not appear. I can select
the div by clicking
> its
> border but can't select inside of it to get a cursor.
>

Inserting images in dreamweaver

HELP! :)
when I insert images on my page, large grey box with a grey X
appears...does anyone know how to fix this?

Josie is right - sounds like you are not working in a defined
site within Dreamweaver.
The cross mark means the image is not linked correctly.
If you are working in a defined site, then maybe post a link
to the problem page or post the code to
the probelm area.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
CSS Tutorials for Dreamweaver |
http://www.adobe.com/devnet/dreamweaver/css.html
Book: Ultimate CSS Reference (aff link) |
http://www.sitepoint.com/launch/005dfd4/3/133
"jimmykamal" <[email protected]> wrote in
message
news:gpou26$pva$[email protected]..
> HELP! :)
> when I insert images on my page, large grey box with a
grey X appears...does anyone know how to
> fix this?

Inserting Images in DW

Hi
I've inserted an image (using Insert Image key) as a
"background" using a table cell over which I've put some writing in
a layer. When I load it up in DW usng F12 the image/writing looks
great but when I host it to the web I dont get the image but a
little box in the top left hand corner (the writings fine). Spent
the last hour trying to sort this and now pulling out my hair with
frustration (haven't got much left anyway). Please help!
Many thanks for your comments

perferably jpg, gif or (to a lesser extent PNG) usually 72dpi
and not more
than 50k per image (preferably less)
Gerry
http://www.FinanceExtra.net/SubmitReview
- tell us your experiences with UK
companies.
http://www.UsableHost.co.uk
- UK Windows Hosting
"Steve" <[email protected]> wrote in message
news:[email protected]..
> On Sat, 10 Feb 2007 08:22:49 +0000 (UTC), "Mike93510"
> <[email protected]> wrote:
>
>>Thanks. I hadn't reallized that the image needed to
go to the server as
>>well. Does it need to be saved as a particular format
(jpeg etc).?
>
> The same format as it is on your local computer.
> --
> Steve
> steve at flyingtigerwebdesign dot com

Inserting image in rtf doc

Hi all,
i am trying to make my own rtf editor , I've read the most of the toppics in this forum on this issue,
but I'm stucked on inserting the hex Data into the document.
Do I actually need to override ImageView?
I found a method in RTFReader (instantiated from read(InputStream in,...)) handleBinaryBlob(byte[] data).
RTFReader is private, so I cannot override this method. Should I override the read method in
RTFEditorKit and then call the read method in DefaultEditorKit, or I could just use the doc.insertString(...) with the binary data inside of the overriden RTFEditorKit read method? I will lose the functionallity of the RTFParser this way.
I know I should override read and write methods but how?
So could somebody help me on this?
The code for creating the binary data from buffered image and creating the Icon from StanislavL follows:
ImageIcon icon=(ImageIcon)StyleConstants.getIcon(attr);
if (icon!=null) {
int w=StyleConstants.getIcon(attr).getIconWidth();
int h=StyleConstants.getIcon(attr).getIconHeight();
ByteArrayOutputStream os=new ByteArrayOutputStream();
PNGCodec p=new PNGCodec();
ImageEncoder pe=p.createImageEncoder("PNG",os,null);
BufferedImage bi=new BufferedImage(w,h,BufferedImage.TYPE_INT_RGB);
bi.getGraphics().drawImage(icon.getImage(),0,0,null);
pe.encode(bi);
byte[] ba=os.toByteArray();
int len=ba.length,i;
StringBuffer sb=new StringBuffer(len*2);
for (i=0;i<len;i++) {
String sByte=Integer.toHexString((int)ba & 0xFF);
if (sByte.length()<2)
sb.append('0'+sByte);
else
sb.append(sByte);
String s=sb.toString();
out.write("{\\pict\\pngblip ");
out.write(s);
out.write("}");
extracting image
String content; //<- image representation
int len=content.length();
//converts to binary representation
byte[] buf=new byte[len/2];
for (int j=0; j<len/2 ;j++) {
String c1=content.substring(j*2,j*2+1);
String c2=content.substring(j*2+1,j*2+2);
byte b1=Byte.parseByte(c1,16);
byte b2=Byte.parseByte(c2,16);
buf[j]=(byte)(b1*16+b2);
//creates image from binary
Image img = Toolkit.getDefaultToolkit().createImage(buf);
ImageIcon icon=new ImageIcon();
icon.setImage(img);
if ((icon.getIconHeight()<0) || (icon.getIconWidth()<0))
return;
MutableAttributeSet attr=new SimpleAttributeSet();
StyleConstants.setIcon(attr,icon);
//inserts image in the document
document.insertString(currentOffset," ",attr);
currentOffset++;
I guess these two functions must be implied into the overriden EditKit write and read methods.
Could somebody give me a start idea?
regards
rumpi

Thanks for reply.
It did't helped me a lot or I'dont really understand your idea.
What you say in your postings is build my own reader and writer.
For example to open a rtf file in my jeditorpane I must read from
the input stream each byte and reimplementing AbstractFilter, RTFParser and RTFReader
I could get all headers like \par or \pic and then rtfDoc.insertString(pos, "the label content", attr) with the attributes extracted from header.
When that is the only way I am asking myself what are the swing people for?!?!
I'll try to do that myself, so I'm not asking for code but I would appreciate
some detailed info about it. For example when I dont use RTFReader anymore
I loose everything what I've got untill now. So I should read every byte opening a file
and check like in RTFParser if the first character is "\", then the next couple of bytes
untill I get the header. Then I should check which labels(text) is this header for(until the next header), so
I could insert a string with the according attribute set? For Icon when I get the
\pic header I read the byte sequence and build the picture just like you wrote.
My Editor is an applet so I've hoped I wouldn't send too much code to the client
so reimplementing RTFParser, Reader... would slow it down, but whatever.
Thats really a lot of work only because the given classes are not extendable, grrrr.
Viravan, thanks for the fast reply , but like I said , I 've already read all relevant
postings in this forum and didnt found something really helpful. I already read all
tutorials and articles from sun about this issue and I still have the feeling I'm a freshman
in this area.
I'm still angry with the swing team about it, this bug is noted since 2001 I think. grrr
regards
rumpi

Inserting Images with full web address

I would like to set Dreamweaver so that when I insert images,
it uses the full internet address so that if I copy and paste the
HTML code elsewhere, the images will work. This should be simple,
right?
Presently, when you insert am image, the code is "<img
src="images/terms.jpg" width="370" height="50">" I would like to
insert automatically as "<img
src="www.mysite.com/images/terms.jpg" width="370" height="50">"
Of course I could constantly be doing a find and replace, but
I would rather lear the correct way.
Also, after I do the find and replace, some of the images
show up and others do not, even though the code is correct and when
viewed externally, it all shows up correctly.
Text

> I don't think DW can resolve images that are being
references by the full
> URL locally in design view.
Sure - has done so since DW8. Not just images, either....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"darrel" <[email protected]> wrote in message
news:fg5023$h4g$[email protected]..
>> Presently, when you insert am image, the code is
"<img
>> src="images/terms.jpg"
>> width="370" height="50">" I would like to insert
automatically as "<img
>> src="www.mysite.com/images/terms.jpg" width="370"
height="50">"
>
> Be sure to put the HTTP: in there.
>
>
>> Also, after I do the find and replace, some of the
images show up and
>> others
>> do not, even though the code is correct and when
viewed externally, it
>> all
>> shows up correctly.
Text
>
> I don't think DW can resolve images that are being
references by the full
> URL locally in design view.
>
> -Darrel
>

Inserting images in forum message?

Similar Messages

Maybe you are looking for