Inserting line in video rather than hanging in air in adobe premier pro

I want to draw a line in a video on the last layer of the video.Like if i hv taken a video of a part of roads with vehicles runningOn it and i need to draw a line on the surface of the road.I am trying and the line which i put in the video.it used to hang inThe air with vehicles going down from under the line which i hv drawn.but i need that the line should be look like as if it attached To the roads and vehicle passing over it..which actuallyShould look as real video with line attached to the surfaceOf the road rather than hanging in the airI am very new to adobe.and trying for it and i am in urgent needOf it's solution.thanks in advance.
what i am doing is open the video from premierPro cs5 and drag that video in video 1 pane.and then press Ctrl t and put the line in the imageand save and after that drag that Sequence to video2 pane and then save..after that i click on theExport button..but the desired output of line on the last layer surface ofThe video..i know there r much steps after that like aftereffectWhich i do not know.please help me i am very newbie.please explain itTo do step by step to achieve the desired result.

Thank you for responding.
I took your advice and in the Capture window there’s an option near the bottom right that states “Capture” and below that is a button “In/Out”. I guess this is what you are talking about. So I click on the button, “In/Out” and I get a pop up the states, “Invalid time code range”. How is the average use supposed to know what this cryptic message is saying? (user unfriendly).
I see two icons that look something like brackets that is to the left of the play button. I clicked on these but nothing seems to happen. I don’t know what is going on. (user unfriendly).
Perhaps since I need just a typical You Tube video, I should purchase video capture software that is more users friendly and less intuitive. That being said, MS Movie Maker does not show the option “Capture from video device” I may try video capture software on CNET.com that is recommended and has a money back guarantee. I paid a lot of money for my Adobe Premier, but being that I am in Windows 7, perhaps it is time to retire Adobe.

Similar Messages

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

RTSP stream downloads video rather than displaying...

I've got an internet security cam that I can view on my PC as an RTSP stream with Quicktime, Windows Media Player, Real Player, etc.
My E71x has Real Player and when I enter the same address that streams on my PC, the MediaNet app starts to download the stream, rather than displaying the video. It will go as long as I leave it, downloading MB of data.
Does anybody know how to get this RTSP stream to display as video rather than download? I've tried Opera and Bolt but neither pull up Real Player like MediaNet. I know the RTSP on the phone must be working because the YouTube app works like a champ.

You can specify a folder on a computer (or iPhoto events etc on a Mac) though you may not get perfect control over display order.
Use iTunes>File>Home Sharing>Choose photos to share etc
iTunes would need to be running on teh LAN to support this.
AC

Video controls under video rather than on top?

Any way of making the video controls that Edge make under the video rather than on top of the video?
ie in my example below it's interfering with the white arc and text...
Thanks in advance.

Buttox. I hereby submit a request
Or is there a request area I should be doing that?

When my system upgrade from os x 10.9.4 to os x 10.10.1, the time of shot down in my system is very long rather than pervious os. my system is macbook pro 11.1

when my system upgrade from os x 10.9.4 to os x 10.10.1, the time of shot down in my system is very long rather than pervious os. my system is macbook pro 11.1.
please inform me about this problem

Jan 8 18:36:31 localhost kernel[0]: Previous shutdown cause: 5
Jan 8 18:37:06 Jashan-Mr-2.local shutdown[927]: reboot by apll:
Jan 8 18:37:06 Jashan-Mr-2.local shutdown[927]: SHUTDOWN_TIME: 1420729626 658562
Jan 8 18:39:44 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 8 18:39:45 localhost kernel[0]: Previous shutdown cause: 5
Jan 8 19:02:58 Jashan-Mr-2.local shutdown[1286]: halt by apll:
Jan 8 19:02:58 Jashan-Mr-2.local shutdown[1286]: SHUTDOWN_TIME: 1420731178 850680
Jan 8 19:02:58 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1286<-sessionlogoutd.1285<-launchd.1
Jan 8 19:13:09 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5
Jan 8 20:11:44 Jashan-Mr-2.local shutdown[1927]: halt by apll:
Jan 8 20:11:44 Jashan-Mr-2.local shutdown[1927]: SHUTDOWN_TIME: 1420735304 825738
Jan 8 20:11:44 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1927<-sessionlogoutd.1926<-launchd.1
Jan 9 12:06:41 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 9 12:06:41 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5
Jan 9 12:25:15 Jashan-Mr-2.local shutdown[1868]: halt by apll:
Jan 9 12:25:15 Jashan-Mr-2.local shutdown[1868]: SHUTDOWN_TIME: 1420793715 291375
Jan 9 12:25:15 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1868<-sessionlogoutd.1867<-launchd.1
Jan 9 12:28:47 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 9 12:28:48 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5

How to blur the face of the person in the video using Adobe Premier Pro CS5

Hi
I have a video captured from a flipcam. I have Adobe Premier Pro CS5 and I don't have any knowledge of Adobe Premier Pro CS5 . Please can some one post a tutorial as how to blur the face of the person in the video using Adobe Master Collection CS5
Any help will be grateful .
Thanks

You are not really in the right place. I don't think you can edit video with Photoshop CS5, but Premier Pro CS5 can definitely do it. Off the top of my head, copy the video track on the timeline, (hold down the Alt/Opt key and drag).
Then Effects > Video Effects > Stylize > Mosaic.
Adjust number of blocks in Effects controls.
Then add Video effects > Keying > Four point matte
Adjust position of matte in effects controls.
If you want the matte to track with the video, move to start point on time line and adjust position. Move to end point and edit position. Matte will now move from one point to the other.
If you want more and better help, go to the Prem Pro forum.

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

"Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers." What does this mean? Need help urgently!

Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.

Error "Premiere Pro could not find any capable video play modules" | Startup

How Adobe Premier Pro's linked video clips are ID in Bridge?

I just finished a FEATURE-FILM in HD comprised of 40 + different Adobe Premier Projects;
Obviously, at the end you end up with many video clips associated to manyAdobe Premier Projects (i.e.; one video clip could be being used by 17 Adobe Premier Projects), and some video clips are associated to none.
So this is the thing: I need to delete 5,000 + useless-not associated video clips, however, to make sure that I am not breaking any link, I need to know that they are, or they are not associated with any of my Adobe Premier Projects.
How does Bridge indicate that a video clip is or is not associated (linked) to an Adobe Premier Project?
Thank you in advance for your help
Barro-THX

Have you tried posting on the Premier Pro forum?
A hint for future posts. If you do not get a response in a reasonalble time rather than reposting, just reply to it yourself with anything and it will be moved to the top of the list again.

No audio on Adobe Premier pro for some video

I have recorded a series of videos as an .MTS format and imported them on my computer. Some of the videos use audio from the onboard camera mic and some interview footage use a clip-on audio mic. When I play back the videos on premier pro cc, the onboard mic recordings are fine--but I hear nothing from the videos where I used the clip on mic. (the videos with the clip-on mic are in mono)
For the videos I recorded with the mono mic:
-I can clearly see levels that indicate audio is there.
-When I play back the video on the camera, the audio is also there, clear as day.
-For some reason, there is no audio when the computer plays back, even when I use VLC.
I searched on-line, but there does not to be much info on my specific issue. Can you suggest anything?

Try this - I had the same problem and it worked for me. Can you see waveforms in the suspect audio track in the Premiere timeline? If so, it's there and it's just a playback issue which could be a couple of things. Eg,
- you won't hear audio if Premiere is still generating peak files (to check if this is your problem, check in the bottom right hand of the corner and you'll see a little yellow bar progressing and a message saying 'generating peak audio'). This can take several hours or even over night for a big project, eg with lots of Red .r3d media.
- another reason is if the audio can't be played back without rendering. Is the playback bar at the top of the timeline yellow, green or red? If green, this could be your issue. When you go to the go to the sequence menu and go to select 'render audio' is it greyed out? If so, you need to select the 'render audio' box in the 'general' tab of the 'preferences' pane from the menu. Then render your audio and you should be fine to play back. Does this help?

Which video capture card/divice need to use for adobe premier pro

which video capture card/divice need to use for adobe premier pro

For DVD, I prefer this merthod:
http://www.videohelp.com/tools/XviD4PSP
For DV cameras, you just need to hook it up via FireWire.

Any futures plans to include a real video editing software for hp sprout, like Adobe premiere pro?

Very simple question.
Is there any plans to include a real video editing software for HP Sprout?
Video editing software like Adobe premire Pro?
It will be amazing if you (HP people) can develop and integrate a video editing software like Adobe premiere Pro into the HP Sprout.
Thank you in advance!

Diodio wrote:
Very simple question.
Is there any plans to include a real video editing software for HP Sprout?
Video editing software like Adobe premire Pro?
It will be amazing if you (HP people) can develop and integrate a video editing software like Adobe premiere Pro into the HP Sprout.
Thank you in advance!
HP is pretty reticent to revealing "Future Plans". It would be a real shot in the arm though if this happens!
How about it @Ty1 ? Can you shed any light on the subject?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

In imovie how do I seperate all my videos from the photos from iphoto? I have thousands of photos so finding the odd video here or there is like finding a needle in a haystack! Is there a way I can simply import the videos rather than all the photos

Imovies - how do I seperate the videos from the photos. My library has bundled them all together from iphoto

One way I was able to do this, was to make a Smart Album in iPhoto, with the rule of showing just the movie files. This will work, once you know what format the movie files are in.
In iPhoto, select one of your movies, and right click it. Look for the option: "Reveal in Finder" or "Show in Finder" (this depends on the version of iPhoto).
Once you see the file, look for the three letters AFTER the period. Like this:
.mov (QuickTime movie)
.avi (Uncompressed Windows Video)
.mpg (MPEG video)
Back in iPhoto, when you make your Smart Album, set it up like this:
Once you have it set like this, press RETURN (or click "Ok").
What you'll see is all the videos that have that file extension (.mov, .avi, .mpg, etc.) listed. Now the nice thing is this: Every new movie you add to iPhoto will automatically get listed here, regardless of where in iPhoto they live!
Integration with iMovie:
By making this album in iPhoto, when you get to iMovie, you'll be able to see the movies when you select your Videos Smart Album.
I hope this helps you out. They have iPhoto and iMovie workshops at Apple Stores that cover this too. They're free, and you can learn a lot.
Sincerely,
Brian K. James

Is it possible to have a button that will insert a table row rather than add it to the end?

I have an add row button that works correctly using addinstance, but I would like to have the add row button at the end of each row so a user could insert a row into the middle of existing/fiilled out rows. Is this possible? I would like to be able to do this using Formcalc as that is what all of my scripting in the form currently is.

Hi,
Yes, it is possible, but in effect what the script does is add a new row at the end of the table AND then move the row up to the approrpiate position.
See the examples here: http://assure.ly/gk8Q7a. Table 5 is a Table object, whereas Table 6 is built using subforms. In both cases the Index number is a button, that adds a row below the existing one clicked.
See does that help,
Niall

Took a video rather than still pic by mistake. How do I print one frame?

Took a video by mistake instead of a single pic. How do I print one frame?

There are apps such as Video 2 Photo (I haven't tried it) that apparently allow you to extract frames from a video

Inserting line in video rather than hanging in air in adobe premier pro

Similar Messages

Maybe you are looking for