Inserting multiple documents

When I 'insert' multiple documents into one, they are added to the original in
reverse order. how do I get them in the correct order without moving them individually one at a
time after they are inserted?

In Windows Explorer use the menu entry 'Combine supported files in Acrobat...'.

Similar Messages

How do I insert multiple photos into an excel document vs inserting each individually? Insert, Picture, From FIle...now what? it only allows me to choose 1 at a time.

Help - How do I insert multiple photos into an excel document vs inserting each individually? Insert, Picture, From FIle...now what? it only allows me to choose 1 at a time.

https://discussions.apple.com/thread/3383532?tstart=0
Stefan

Inserting multiple pages, in order, into a document

I have a pdf document that I want to insert multiple single pdf's after the first page, in the order I select them. For some reason thet are inserted in random order. Not the order they were selected as. i have adobe acrobat creator 9 pro
Where is a good place to buy non drm pdf techinocal books.

In Acrobat use File > Create PDF > From Multiple Files...

Inserting Multiple Page PDF in Word Document

I've been searching for an answer to what I thing ought to be a rather simple question and I can find nothing. I have a couple of users who have attempted to insert a multiple page PDF into a Word document and found that only the first page of the PDF
shows up in their document. Is there any method to insert multiple page PDFs into Word as multiple pages without splitting the PDF into individual single page files and inserting individually?
Thanks...Ray

A quick and dirty way to do this is to open the pdf document in question with word separately. You get the following warning message.
I can then select all and copy/paste in to my word document.
The few pdfs I tried this with pretty much turned in to all images when I did this, but it worked my purposes.
I did end up having to resize one that didn't seem to want to fit when I pasted it in. There may be a method to select an image and automatically fit it within the margins of the page it is on that would help that.
The file size on my resulting word document seemed to grow quite a bit as well. Again, not really an issue in my case though.

Insert multiple images

How to insert multiple images into html document ?
From the menu Insert > Image you can't choose more than 1 image... how strange is that ?!?

Well ... here's one way you can put 100 photos onto a page in DWCS4
First - be sure all photos are web ready - I had one straight from my camera and at 4+MB it was a bit TOO LARGE!)
Next - have them in a folder outside of DW and select them.
Next - drag them into Design View and drop them and answer all the popup screens
Like this:
Respond to the following:
And Picture One is there .... continue several hundred more times (though is goes pretty fast)
and now there are five ....
And in a browser -
And browser resized -
Hope this helps ..... But like Nancy says "Happy Clicking"

Insert multiple records into database through internal table

Hi
please help me how to insert multiple records into database through internal table

Hi,
Welcome to SCN.
Press F1 on INSERT statement and you will teh syntax as well the docu for the same.

Insert Multiple Rows into a Database

Hi,
I've been working on a project that takes an xml document from JMS queue and inserts the data into db. But the problem here is that there can be any number of data sets. I've been using OEPE for my task, but no matter what I do, the data simply isn't inserted. Could any body please help me? Here is a sample message that I'm trying to insert, as well as the XSDs for the JCA and the input documents.
XSD for JMS Message:
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified">
<xsd:element name="cannonical">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="orders">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="data" maxOccurs="unbounded">
     <xsd:complexType>
          <xsd:sequence>
               <xsd:element name="rowCode" type="xsd:string"/>
               <xsd:element name="productNumber" type="xsd:string"/>
               <xsd:element name="attributeType" type="xsd:string"/>
               <xsd:element name="attributeCode" type="xsd:string"/>
               <xsd:element name="transactionType" type="xsd:string"/>
               <xsd:element name="timestamp" type="xsd:dateTime"/>
          </xsd:sequence>
     </xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
JCA XSD:
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/InsertData" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/InsertData" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="OrderDataCollection" type="OrderDataCollection"/>
<xs:complexType name="OrderDataCollection">
<xs:sequence>
<xs:element name="OrderData" type="OrderData" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="OrderData">
<xs:sequence>
<xs:element name="prodnum" type="xs:decimal"/>
<xs:element name="attrtype" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="20"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="attrcode" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="10"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="transtype" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="1"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ordertime" type="xs:dateTime" minOccurs="0" nillable="true"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
Sample Input:
<?xml version="1.0" encoding="windows-1252"?>
<ProductData>
<header>
<rowCode>H</rowCode>
<interfaceCode>H6D9J7</interfaceCode>
<createdOn>
<date>
<year>2011</year>
<month>05</month>
<day>23</day>
</date>
<time>
<hour>02</hour>
<minute>05</minute>
<seconds>11</seconds>
</time>
</createdOn>
<description>Front Shop Item Attributes from FMS to JDA PMM</description>
</header>
<body>
<data>
<rowCode>D</rowCode>
<productNumber>0004567</productNumber>
     <attributeType>TTTTTT</attributeType>
<attributeCode>CCCCCCCjjj</attributeCode>
     <transactionType>A</transactionType>
<timestamp>
<date>
          <year>2011</year>
<month>02</month>
          <day>19</day>
     </date>
     <time>
     <hour>02</hour>
<minute>05</minute>
<seconds>11</seconds>
</time>
</timestamp>
</data>
     <data>
<rowCode>D</rowCode>
<productNumber>0004567</productNumber>
<attributeType>TTTTTT2</attributeType>
<attributeCode>CCCCCCjjj2</attributeCode>
<transactionType>A</transactionType>
<timestamp>
<date>
          <year>2011</year>
<month>02</month>
          <day>19</day>
     </date>
     <time>
     <hour>02</hour>
<minute>05</minute>
<seconds>11</seconds>
</time>
</timestamp>
</data>
</body>
<footer>
<rowCode>Z</rowCode>
<interfaceCode>H6D9J7</interfaceCode>
<numberOfRows>000000000002</numberOfRows>
</footer>
</ProductData>
I'll be really grateful if anybody can help me out. Thank you.

Check below link it may help you out
how to Insert multiple records using single DB Adapter
Thanks
AJ

I have multiple documents how can I combine them into one document?

I have multiple document files in Pages. How can I combine them into one document?

Menu > View > Page Thumbnails > click on the thumbnails > Copy/Paste into thumbnails of other document
Peter

Display data from multiple document Libraries in List View Webpart

Hi All,
I want to display data from multiple document libraries into one list view webpart(custom i have created)
I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
but it tells to display only from one document library.
My motive behind displaying data in the list view webpart is to achieve the functionality of Check In ,Check Out and other OOB features.
With Regards,
Jaskaran Singh

Hi,
As there is no such OOTB feature, a workaround is to create a visual web part to gather items from libraries and implement functionalities like Check in, Check out files
in different libraries.
The links below will provide more details:
Create Visual Web Parts in SharePoint
2010
A demo about displaying list items in visual web part:
http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx
About the Check In and Check Out:
How to Check In a document programmatically
SPFile.CheckIn method
and SPFile.CheckOut method
Best regards
Patrick Liang
TechNet Community Support

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time?

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time? Right now, when I'm trying to highlight documents to export, I have to click on each document individually. Is there a way to highlight one document while scrolling down the list until all desired documents are highlighted? I would like to rapidly be able to do this to save time when I am exporting or saving multiple files from my documents to an external drive, CD-Rom or cloud storage.

Click on the first item
Hold the Shift key
Click on the Last Item.
All the items in between will be selected.

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

One TOC for Multiple Documents

Working on a book project where each chapter must be its own document (due to multiple large graphics). Is it possible for the Table of Contents (TOC) can contain info from multiple documents, or will I have to create the TOC manually when I'm done with the book?
Thanks!

You will have to create the TOC manually when you're done with the book.
You could however, as a work around, amalgamate the book without the graphics (but leaving the frames to hold their place), generate the TOC and then add that to your collection of chapters.
Peter

How do I delete multiple documents at the same time

How do I delete several or multiple documents at the same time. Do I have to delete each one individully?

You can select multiple adjacent files or folders by clicking on the first one then shift-click on the last one. Multiple non-adjacent files or folders can be selected one at a time by command clicking on each one. Click on any selected file or folder then drag/drop to trash.

How do I scan multiple documents to a single pdf from the ADF on my MX922?

How do I scan multiple documents to a single pdf from the ADF on my MX922?
Solved!
Go to Solution.

Hi Riceburner1,
Since you have had difficulty scanning using My Image Garden, you can scan using the IJ Scan Utility program that also comes with the printer. To do this, please follow these steps:
1. Place the documents in the ADF or on the platen glass of the printer.
2. Start the IJ Scan Utility.
For Windows 8.1:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it, then continue with Step 3 below.
For Windows XP:
1. Go to your START MENU, then select ALL PROGRAMS, then CANON UTILITIES, then the IJ SCAN UTILITY program.
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears. Please continue with Step 3 below.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window. In the Select Source field of the Scan Options section, select DOCUMENT (ADF/PLATEN) to scan items placed directly on the platen glass, DOCUMENT (ADF SIMPLEX) to perform single-sided scanning from the ADF, or DOCUMENT (ADF DUPLEX) to perform double-sided scanning using the ADF. You can then set the item size, resolution, etc. in the Scan Options section as desired.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file. Please note that the filename that you give the document here will be the default filename for all items scanned until you change the file name. If you leave the file name the same in the field, the scanned item will have a sequential number appended to the end of whatever name you give it.
b.) In the DATA FORMAT field, use the drop-down arrow to select the desired option. If you are scanning a multipage document, select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. In the APPLICATION SETTINGS section of the window, please select the DO NOT START ANY APPLICATION option.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Once the scan is completed, scanned images are saved in the previously selected folder location specified in the SETTINGS... window.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I insert multiple rows from a single form ...

How do I insert multiple rows from a single form?
This form is organised by a table. (just as in an excel format)
I have 20 items on a form each row item has five field
+++++++++++ FORM AREA+++++++++++++++++++++++++++++++++++++++++++++++++++++
+Product| qty In | Qty Out | Balance | Date +
+------------------------------------------------------------------------+
+Item1 | textbox1 | textbox2 | textbox3 | date +
+ |value = $qty_in1|value= &qty_out1|value=$balance1|value=$date1 +
+------------------------------------------------------------------------+
+Item 2 | textbox1 | textbox2 | textbox4 | date +
+ |value = $qty_in2|value= $qty_out1|value=$balance2|value=$date2 +
+------------------------------------------------------------------------+
+ Item3 | textbox1 | textbox2 | textbox3 | date +
+------------------------------------------------------------------------+
+ contd | | | +
+------------------------------------------------------------------------+
+ item20| | | | +
+------------------------------------------------------------------------+
+ + + SUBMIT + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Database Structure
+++++++++++++++++
+ Stock_tabe +
+---------------+
+ refid +
+---------------+
+ item +
+---------------+
+ Qty In +
+---------------+
+ Qty Out +
+---------------+
+ Balance +
+---------------+
+ Date +
+++++++++++++++++
Let's say for example user have to the use the form to enter all 10 items or few like 5 on their stock form into 4 different textbox field each lines of your form, however these items go into a "Stock_table" under Single insert transaction query when submit button is pressed.
Please anyone help me out, on how to get this concept started.

Hello,
I have a way to do this, but it would take some hand coding on your part. If you feel comfortable hand writing php code and doing manual database calls, specificaly database INSERT calls you should be fine.
Create a custom form using the ADDT Custom Form Wizard that has all the rows and fields you need. This may take a bit if you are adding the ability for up to 20 rows, as per your diagram of the form area. The nice thing about using ADDT to create the form is that you can setup the form validation at the same time. Leave the last step in the Custom Form Wizard blank. You can add a custom database call here, but I would leave it blank.
Next, under ADDT's Forms Server Behaviors, select Custom Trigger. At the Basic tab, you enter your custom php code that will be executed. Here you are going to want to put your code that will check if a value has been entered in the form and then do a database INSERT operation on the Stock_table with that row. The advanced tab lets you set the order of operations and the name of the Custom Trigger. By default, it is set to AFTER. This means that the Custom Trigger will get executed AFTER the form data is processed by the Custom Form Transaction.
I usually just enter TEST into the "Basic" tab of the Custom Trigger. Then set my order of operations in the "Advanced" tab and close the Custom Trigger. Then I go to the code view for that page in Dreamweaver and find the Custom Trigger function and edit the code manually. It's much easier this way because the Custom Trigger wizard does not show you formatting on the code, and you don't have to keep opening the Wizard to edit and test your code.
Your going to have to have the Custom Trigger fuction do a test on the submitted form data. If data is present, then INSERT into database. Here's a basic example of what you need to do:
In your code view, the Custom Trigger will look something like this:
function Trigger_Custom(&$tNG) {
if($tNG->getColumnValue("Item_1")) {
$item1 = $tNG->getColumnValue("Item_1");
$textbox1_1 = $tNG->getColumnValue("Textbox_1");
$textbox1_2 = $tNG->getColumnValue("Textbox_2");
$textbox1_3 = $tNG->getColumnValue("Textbox_3");
$date1 = $tNG->getColumnValue("Textbox_3");
$queryAdd = "INSERT INTO Stock_table
(item, Qty_In, Qty_Out, Balance, Date) VALUES($item1, $textbox1_1, $textbox1_2, $textbox1_3, $date1)"
$result = mysql_query($queryAdd) or die(mysql_error());
This code checks to see if the form input field named Item_1 is set. If so, then get the rest of the values for the first item and insert them into the database. You would need to do this for each row in your form. So the if you let the customer add 20 rows, you would need to check 20 times to see if the data is there or write the code so that it stops once it encounters an empty Item field. To exit a Custom Trigger, you can return NULL; and it will jump out of the function. You can also throw custom error message out of triggers, but this post is already way to long to get into that.
$tNG->getColumnValue("Item_1") is used to retrieve the value that was set by the form input field named Item_1. This field is named by the Custom Form Wizard when you create your form. You can see what all the input filed names are by looking in the code view for something like:
// Add columns
$customTransaction->addColumn("Item_1", "STRING_TYPE", "POST", "Item_1");
There will be one for each field you created with the Custom Form Wizard.
Unfortunately, I don't have an easy way to do what you need. Maybe there is a way, but since none of the experts have responded, I thought I would point you in a direction. You should read all you can about Custom Triggers in the ADDT documentation/help pdf to give you more detailed information about how Custom Triggers work.
Hope this helps.
Shane

Inserting multiple documents

Similar Messages

Maybe you are looking for