Inserting other project at the beginning

I have created two separate iMovie projects on two separate computers. The first is all set to one song. The second has three separate songs, but is all one in one project. I want to insert the first project at the beginning of the second project, including the song. I plan on copying the first over to my external drive which already has the second project on it and then opening both projects at the same time on the same computer. I know I can copy all of the clips and paste it at the beginning of the second project but when I do that the clips all move over but the music stays just as it was and the music from the first project doesn't come over with it. How do I do that?
Thanks!
powerbookg4 Mac OS X (10.4.6)
powerbookg4 Mac OS X (10.4.6)

I read below and wonder if this is the best way to do it:
"Or, you can save each movie as a QuickTime Full-Quality movie, and open a new iMovie project and drag the QT movies into it. You cannot edit these in the same way as the original iMovies. The QT movies are new movies with the sound/video you put in when editing them the first time. This method will give you a very smooth playback. It will require more free space as you are basically making a copy of each movie. However, once you have created the QT movie, you do not need to save the original iMovie, and can delete it to free up hard drive space.
Then, you can use the QT movies to make your DVDs, either separately,or as one long movie.
One thing to remember: if you made chapter markers in your original iMovie, they will not show up in the QT version, so you will have to create them again."
powerbookg4 Mac OS X (10.4.6)
powerbookg4 Mac OS X (10.4.6)
powerbookg4 Mac OS X (10.4.6)

Similar Messages

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

Can I complete other projects while the download is processing?

Can I complete other projects while the download is processing?

Not sure what you mean. Elaborate! What product do you mean? What download? what kind of work?
Mylenium

Inserting a clip at the beginning of a edited string of clips?

I have five clips edited together. I need to put one more clip at the beginning of the string. Is there a way to move an entire string of clips forward all at once so that I can slip the clip in? Hope this makes sense?

What CC and Ann recommended is right on the money for your immediate goal of inserting a clip before clips that are already in the timeline. But there will be other occasions when you want to select multiple track items. There are several ways to do so:
To select all track items before or after a given point, select the Track Select Backward or Track Select Forward tool and click the timeline. Those tools select clips on all tracks; if you want to isolate a single track, hold SHIFT while clicking.
With the Selection tool active [V]: click a blank spot in the timeline and drag across the desired clips. This is called "marquee selection." By the way, if you do this with the Ripple Edit or Rolling Edit tool active, the edit points between clips will be selected rather than the clips themselves.
Also with the Selection tool, shift-click the track items. This is the best method when the clips you want select are intermixed with others that you want to leave unselected.

How do I insert an image at the beginning of a composition lightbox sequence

Using v4.1 build 8 on MacBook Pro10.6.8
I have an existing lightbox,and I want to add an image (trigger) at the beginning of the sequence, displacing the other triggers/ images to the "right", or "down".
Alternatively, is there a way to re-order the sequence of the triggers/ images on the page?
Joan

Hello,
You can add the new image and after that select the trigger and Drag it to the left of the first image.
Please refer to the video : http://trainingwebcom.worldsecuresystems.com/SachinFTP/2013-06-18_2120.swf
Regards,
Sachin

Insert a line into the beginning of a file without overwriting data

I would like to dynamically alter/add new headers to a csv file as needed. The code I have below overwrites the previously written data an amount equal to each new header added each time I call the vi below. Any suggestions on how to do this without reading in the file each time? I want to avoid the processing time of reading in the file between processing new data.
Thanks!
Attachments:
R900 - Log Data Stream to File.vi ‏22 KB

Yes, but you can still write everytime, you dont need to read the file back.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Spontaneously different projects show pictures (only virtual) hiding the true ones present in other project. clicking on the virtual one appear the era one

Spontaneously different projects show pictures (only virtual) hiding the true ones present in other project. clicking on the virtual one appear the era one

Thanks for your kind interest. The problem seems to be solved. In practice it was a picture (which I have defined virtual) which appeared in the project instead of the one I uploaded. The false images came from other projects in the same library. When I went to click on this false picture, it opened the right file of the image that I had loaded.
I solved the problem with the function "new version from original" applyed for each of the files having this double faces.

Getting running total formula result at the beginning of the report

Hello All,
I am having an inquiry that if I can get a grand total in the report footer to the report header.
The grand total is not a direct sum. I am using three formulas
the first formula:
@reset Group Header
whileprintingrecords;
numbervar sumpct4;
if not inrepeatedgroupheader then
sumpct4 := 0;
the second formula: Details section
whileprintingrecords;
numbervar sumpct4 := sumpct4 + {@Total_Market}; // {@Total_Market}; = Amount+ Interest
numbervar grtotal4 := grtotal4 + {@Total_Market};
Group Footer
whileprintingrecords;
numbervar sumpct4;
Report Footer
whileprintingrecords;
numbervar grtotal4;
All that I need is to show the total which is in the report footer at the top of the page where I am having a summary.
So, can you please help me.
Thanks
Edited by: maas maas on Sep 8, 2010 12:48 PM

Hello my friend,
I want this to be controlled in crystal.
Is there is a way to get the grand total by using multiple formulas or any other way?
Here is the structure of my report:
Group Header 1: CCY
Group Header 2:Type
@reset Group Header
whileprintingrecords;
numbervar sumpct4;
if not inrepeatedgroupheader then
sumpct4 := 0;
Group Header 3A: Deal No
Group Header 3B: Deal No (subreport to get the {@amount} for each deal)
I will pass the end_date from the main report to subreport and I will get the sum(amount) for each deal between date (1-1-2008) to end_date. The sum will be as a shared variable to the {@amount} formual in the main report.
Details:
Deal No, {@amount}, {@Price}, {@market}, {@Total_Market}
{@Price}: if {table.price} = 0 then
100
else {table.price}
{@market}: if Type <> "DEP" then
({@amount}*{@Price})/100
else
{@amount}
{@Total_Market}:{@market}+ {@Price}
Running formula to get Total_market: Details section
whileprintingrecords;
numbervar sumpct4 := sumpct4 + {@Total_Market};
numbervar grtotal4 := grtotal4 + {@Total_Market};
Group Footer 3B: Deal No
Group Footer 3A: Deal No
Group Footer 2:Type
In this group I am placing a running total formula:
whileprintingrecords;
numbervar sumpct4;
Group Footer 1: CCY
Report Footer:
@grand_Total
whileprintingrecords;
numbervar grtotal4;
Now, i want this @grand_total formula result to be shown in Group Header 1: CCY.
I tried to insert a subreport at the beginning which it is a copy of the main report, but I did not get the coorec t result because I am getting the {@amount} from a subreport and in crystal I can't insert a subreport in an existing subreport.

Output on existing file at the begining??

Hi,
I have a problem about outputing.
I want to write some texts at the begining of existing file.
eg... file A
"Hello
then i want to insert some texts at the begining
e.g. insert "YOU"
then file A
will become
"YOU HELLO
any idea?
thank alot

In order to make room for new data at the beginning of a file it is neccessary to shift the original files content towards the end of the file. This cannot be done without copying (read/write) the whole content of the file.
But as you mentioned the term log-file have a look at other log-files written by applications. The newest entry is always at the end of the file. The reason for this is that people encounterd the same problem you have right now.
As a matter of fact, if I read any file with log-entries in my editor I jump to the end of the file right away and start reading the entries backwards from there. People are used to it, just append your log-entries to the end of the file.

When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the resulting segment. What causes this?

When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the bounce. What causes this?

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Problems with "Open other project" in menu builder

Hi everyone,
I have a series of projects that I want to link together
using the menu builder of the "Skin Editor" dialog.
I create my menu items, and for each item choose "Open other
project" in the "On click" dropdown. I then choose the project that
I want the menu item to open. For this example, lets say I chose a
project named "Viewing_Patients"
However, when I publish the project, run it, and then use the
menu to open the next project, it just opens up a browser window
trying to access the URL "
http://Viewing_Patients.htm/
Why is that?
To check my sanity, I created a Click Box in one of the
project's slide where I chose the exact same configuration - "Open
other project" for the "On success" dropdown, and the
"Viewing_Patients" project as the project to open when the box is
clicked.
And this works fine (it opens the "Viewing_Patients" project)
Why is my menu failing but not my click box?
Thanks very much in advance for any help!
- eriiki - tubbs -

Hello Slothrop206,
Try the following steps:
1) Change your Action to be "Open URL or file"
2) Key in the relative URL to the movie you are attempting to
link. If it is in the same directory, simply key in the file name
of the .swf you are attempting to load.
3) Publish and test.
Let us know if this works for you.

How to access code in other projects?

Hi all,
I ran into an issue in FlexBuilder I'm not sure how to resolve, hopefully someone here can help. I have several projects in my workspace right now I'll call them project A and B. I have one project in particular, call that project C, that needs access to code contained in a couple of other projects, A and B. I don't want to copy all those files from the other projects into this one cause there's a lot of files, it's tedious, and unmaintainable. I don't want to make all those files into a flex library either cause it's not really necessary.
I tried adding the folders in project A and B into the source path of project C but when I tried to import those files it did not work. So does anyone know of a way that I can access code from other projects in the same workspace? If you could provide an example also that would be greatly appreciated.
Thanks in advance.
Additional info: The code complete for the import actually shows me the files in the source path are available. In fact, when I hit F3 it points me to the proper file in the other project. However, FlexBuilder keeps telling me the type was not found or it isn't a compile time constant.

Michael Borbor wrote:
I never said don't use OOP, Flex SDK is all about classes, and abstraction, but last time I check there wasn't polimorphism, so AS3 it's not yet a purely OO.
No polymorphism? You should check again. Just because overloading is not supported that does not mean that polymorphism can't be applied. Polymorphism does not start or end with overloading, please read up on polymorphism ( http://www.adobe.com/devnet/actionscript/articles/oop_as3_05.html or find a more generic definition and see that polymorphic principles can be applied in AS 3.0 too ).
No, ActionScript is not purely OOP, but what is? The only language I know of that is considered "a pure OOP language" is Java. Does that make other languages less good? Definitely not. Just because AS 3.0 does not support overloading it does not mean that OOP principles can't be applied and nor does it mean that it's not a valid OOP language.
Michael Borbor wrote:
Instead of learning this architectural stuff If I were new to Flex, first I'll learn what the heck is the Flex SDK, and obviously AS3, then I can move on to design patter, singletons, decorators, PureMVC, and so on.
Well, sice I don't know ehwhoknows and I have no idea how new he is ( he may be new to Flex but that doesn't mean that he is new to programming ), I took "the risk" to add an additional opinion to his post saying that "sure what ntsiii said is totally cool but in the future, you might want to read up on OOP and design patterns because they offer much more than mixing projects in a barbaric manner".
Obviously, if he is new to programming ( a detail that I don't see being mentioned in his post ) then he should stick to the simple things, but does that mean that we can't point out other solutions that may be more complex and harder to understand for a newbie at the moment. At least, he'll now know that there are other solutions out there too. Everything has it's time, but without telling him that "hey, solution A si ok, but solution B would be much better on the long run" then how do you expect him to find out about solution B? By accident?
I wasn't trying to prove anyone wrong, all that I wanted to point out is that there are other solutions out there too that offer much more on the long run. If he can't handle OOP at the moment, no problem, but at least give him the chance to try it out.
@ ATIF FAROOQ: I totally agree that it would be nice if the guys at Adobe would implement overloading and not only, abstract classes would be nice too ( and I mean "real abstract classes" like in Java, not workarounds ).
@ Muzak: Totally agree, I said to use a Library mainly because that's what I use most ( beside simply pasting classes from a project into another; I do this occasionally and sometimes when I'm lazy ). In either case, the final goal is achieved: reusability.
With best regards,
Barna Biro

How to run taskflow of others project in adf uishell

i have main project that have uishell and i want to run taskflow from other project in this uishell
how to do ?

First, deploy TF from other project into the ADF library.
Then, import that the TF library into your current project and use them
Take a look at:
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/52-taskflow-in-lib-169195.pdf
http://docs.oracle.com/cd/E15051_01/web.1111/b31974/reusing_components.htm

"Open Other Project" function failing?

New poster...
I have an issue where I'm using a button on my final slide
that has it's "On success" set to "Open other project." The project
it loads is the same swf that is being published (basically, it
reloads itself into it's same window). I made a bunch of software
simulations using this and it worked, but now all of a sudden it
won't work on ANY of my projects. I've tried setting the "Project"
parameter to the published swf, the .cp project file, and even
using "Open URL or file" and linking to the published html--all
these fail. I've compared the settings in my recent project files
to the project files where it's working to compare/contrast
differences and can't see the difference between the projects that
work and those that don't... any clues?

Welcome to our community, dannyhouk
In this case, I would think you should avoid using the "Open
other project" function and instead use the "Open URL or File"
function. Specify the URL of the page that loaded Captivate to
start with.
Cheers... Rick

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

Inserting other project at the beginning

Similar Messages

Maybe you are looking for