Inserting PIP video into captivate demo - audio problems

Hello,
I am using CP6 and have captured a 1 second demo then imported an FLV file into the demo as a PIP file. It works fine except for some reason it has chopped 1.7 seconds off of the audio at the beginning of the demo:
Any help would greatly be appreciated
thanks
ali

There's a demo here: http://tv.adobe.com/watch/new-in-robohelp10-enterprise-productivity-features/robohelp-10-i ntegration-with-captivate-6/ I followed those instructions and got it to work. The trick is to use both SWF and HTML5 output when you insert the Captivate demo. That's what I wasn't doing. (Also, be sure to download the Captivate patch.)

Similar Messages

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

Inserting MobileMe Videos into IWeb

I have three questions about inserting MobileMe Videos into iweb.
1) I used the "insert from MobileMe" command in iWeb and it allows me to insert a video but I can't change the size of the video. Do you know how I can change the size.
2) I have some movies I have uploaded to the gallery via iMovie and some I uploaded via the mobileme site. The ones via iMovie I can easily insert like I mentioned in Q1 but the others I uploaded are put into an album and iWeb doesn't allow me to select the video I want to insert. It only allows me to insert the whole album which is a small box with links to the album. I want to choose the video to insert into the page. Any ideas How?
3) Is there a way to insert the video from mobileme using the Html Snippet? If so, how?
Thanks
Neil

3) Is there a way to insert the video from mobileme using the Html Snippet? If so, how?
You can use the [OBJECT/EMBED|http://htmlhelp.com/reference/html40/special/object.html] code for inserting media in a page.
When you know the location of the movie you can create a path to it.
Your webgallery is in iDisk>Web>Sites>_gallery>100999>Movie.
[Here's a post that might be helpful.|http://discussions.apple.com/thread.jspa?messageID=7735467&#7735467]
And here you find sample code you may need:
http://www.wyodor.net/MoreEmbed/
+Page is a new design to display all media types in one section.+
And still more here: http://www.wyodor.net/iFrame/

Problem inserting Flash video into DW CS3 template

I would like to insert some flash video into an editable
region inside a DW CS3 template. The template I am using seems to
work for literally hundreds of other pages I have made (none of
which, incidentally, have any media of any kind in them).
I have created the template and then an editable region and
now want to insert the flash video in that editable region. All
goes well until I hit the OK button. then I get this error--Making
this change would require changing code that is locked by a
template or translator The change will be discarded.
Can anyone suggest how I might over come this error??
Thx.
Jane

The problem is the detection option in the video insertion
dialog. If you
disable that option, you will not get the error.
This is a problem because the detection routine requires a
modification to
the <body> tag (insertion of an onload event) which you
cannot easily do in
a template child page.
If you really must have the detection, then you can copy and
past the load
call from a dummy (non-templated) page on which you have also
done the same
insertion. Post back with that page's body tag code, and I'll
show you
how....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jane Smith 2300" <[email protected]> wrote
in message
news:fehcup$e6u$[email protected]..
> Further to my post before--The .htm that I am trying to
insert the Flash
> video
> (converted an AVI file using Flash video encoder) was
built from a .dwt.
>
> The template page has several editable regions in it.
There is also CSS.
> formatting the document. I am trying to insert the Flash
video into one
> of the
> editable regions.
>
> I have no problem installing the video in a page not
built with a template
> or
> without css..
>
> Thanks for any help you can provide.
>
> jane
>

Insert Live Video into a Keynote Presentation?

Is it possible to insert live video and audio from a webcam into a Keynote presentation? I would like to bring a remote participant into a presentation.

Live video can not be played within Keynote.
Switch between Keynpte and the webcam application using; command > tab

Record video into finalcut and audio multitrack into logic in sync

Hi,
I'm an experienced logic user but new to video.
What is the best way to record video and audio multitrack!! synchronously?
Can I record video direct to my harddisc and synchronously record audio into logic or soundtrack pro? We have two separate macs available.
-Can I connect finalcut with logic via rewire or do I need additional sync hardware?
-How can I start record simultaneously for finalcut and logic?
-Do I need finalcut pro?
-Can I record video and audio directly and simultaneously into soundtrack pro or finalcut?
I currently work with a cutter who uses canopus but assign each video take to each audio take is so time consuming. There must be a better solution for video production.
Any feedback appreciated,
Thanks Eddie

I may be wrong about this, but AFAIK…
Can I record video direct to my harddisc and synchronously record audio into logic or soundtrack pro?
No.
-Can I connect finalcut with logic via rewire or do I need additional sync hardware?
FCP is not ReWire compatible.
-How can I start record simultaneously for finalcut and logic?
You can not.
-Do I need finalcut pro?
Maybe, but I can't say one way or the other. What is your goal with video?
-Can I record video and audio directly and simultaneously into soundtrack pro or finalcut?
You can record directly into FCP, either via FW or SDI (if you have supporting hardware)
I currently work with a cutter who uses canopus but assign each video take to each audio take is so time consuming. There must be a better solution for video production.
Not familiar with Canopus, so I can't comment.
Any feedback appreciated,
Some editors find the term "cutter" to be an unfair characterization of what they do. We do waaaaay more than just cut out the bad takes!

Inserting a video into Power Point Slide

I am using Power Point 2011 version 14.4.5 on my MacBook Air with OSX 10.9.5. When I insert a video clip (mp4) into a new slide it plays fine but when I close the reopen the file it is a picture of the first frame and I can't play it.

farmerpete
What version of Premiere Elements are you working with and on what computer operating system is it running? What version of PowerPoint do you have? Background information for now.
A prel file is the project file for a Premiere Elements project. It is not a video file that can be imported into non supported software.
You cannot even open a Premiere Elements project prel in another project.prel.
You can create a Timeline in a Premiere Elements project and export that Timeline to a file saved to a format that is compatible with PowerPoint.
And, then you Insert/Video that file into your PowerPoint presentation. With Microsoft PowerPoint 2010, this seems to be what is supported video-wise
Please review, and then let us know if you need clarification on any of the above.
Thanks.
ATR

How Do You Insert a Video into InDesign CS5.5

What application do you use for making the video?
What are the steps after you make the video to place the video into a web page in InDesign CS5.5?

InDesign cannot place a video into a web page. You might do that in Adobe Dreamweaver, Adobe's premiere program for handling HTML, CSS and JavaScript.
InDesign CAN place a video into an interactive PDF file or a SWF (Flash Player) file.
You can create video in many applications including Adobe Premiere Pro, Adobe Photoshop, Final Cut Pro, iMovie and many more applications.

Inserting Video into Captivate 6

How do you determine how many slides to add to accommodate a video file?

When you upgrade Cp you should also ALWAYS rename or delete the previous versions's preferences folder. Did you do that? If not, close down Cp and do that now, then relaunch and see if it helps.
There are lots of threads on this forum about resetting Preferences. If you can't find one, then look at troubleshooting tip number 8 on this page:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques

Importing Compressed Video into DVD studio Pro: PROBLEM WITH SYNC

Hello,
This post regards software from Final Cut Studio 3
So, I have made a 2 minute clip in FCP7, exported it, compressed it using compressor, and then opened up dvd studio in order to burn it.
I have made sure the lengths of the audio and video were equal in FCP.
The problem is that when i drag the M2v and AC3 files into the DVD studio pro timeline, The audio is slightly longer than the video track.
I am creating a loop and want to duplicate the tracks within DVD studio to make use of the full dvd....so after i have added the files into the timeline a few times, there is a noticable lag, due to the discrepency between the length of audio and the length of the video.
I have even tried to change the length, under 'duration'in the track menu, but this makes no difference.
any help much appreciated.
THanks, Bradley

Bradley Zero wrote:
The looped clip in question is APPROXIMATELY 2 minutes. Infact, the DVDs are for an art installation, with numerous clips all Approx 2 minutes long, set to loop using dvd studio to around 20 minutes. (snip) However the loop is fine tuned so cutting frames to allow for the different frame rates of Ac3 and M2v is not an option.
So far I have only made a test batch, next time to avoid these problems I will Loop the files within FCP7 before exporting and compressing to avoid frame rate discrepancies. good idea??
I'm not surprised to hear that the clips are for an Art installation. I once helped my partner with multiple looped VHSs for a Degree Show & believe me DVDs make life a whole lot easier!
In conclusion I would recommend that you do a separate sound & vision edit, so to speak. Once you have finished your vision edit, lay down the single (compressed) vision clip on a track in DVD SP. Loop it to taste, and make a pencil note of the number of loops. Go back to FCP & duplicate your original final edit (ie the 'lock down') & loop the sound to match. Play out just the complete soundtrack at the new ~20 minutes and encode the resulting mix to AC3. Add it into DVD SP3. Voila! Really this is no different from making a movie; when the sound is going to be worked on by a whole different set of people from the pictures and both added together when complete.
... is there an alternative sound format to export in that is compatible with dvd studio pro that will sync perfectly in the sequence?
Of course uncompressed .aiffs don't suffer from the frame-based problem and are compatible with DVD SP. However using uncompressed sound is not recommended as this can lead to playback problems - especially with DVD-Rs - because of the high bit-rate.
BTW where is the show? Regards, Stedman.

Can I link video into my existing audio podcast stream?

I am a podcast producer for a non-profit and have just started doing videos too. How do I link video-casts into my show's existing podcast stream? I would appreciate help.
Thanks.

My original answer assumed you wanted to use streaming video, but probably I misread what you intended: the term 'stream' doesn't apply to a podcast. You can add video episodes to your podcast feed - there's no problem about some episodes being audio and some video.
Your video file must be .m4v, .mov or .mp4, not .wmv or .swf (Flash). You place them on an ordinary web server, just as you would with a web page, and link to them in the feed, which can be placed on the same server.
You should check that your server is configured to serve these video files - most are: enter the URL in Safari and the files should play in the browser window (you can also use FireFox but you will probably have to wait for the entire file to download before you can play it). If the browser downloads the file, or offers to, the server is not correctly configured and you need to talk to the people running it.
This page give you information on making a podcast, including a sample basic feed:
http://rfwilmut.net/pc

Captivate 3 audio problems after publishing...

Help please... having problems with audio getting messed up after publishing. I'm recording all audio w/in Captivate3. When I publish and put on our browser, the audio is missing on some slides, also if you pause for FF the video, the audio sometimes is overlaping, or not in sync. Any suggestions?
Thank you
Bev

Hey Luke,
I apologize for not getting back sooner, been swamped at work and I'm
moving. OK here is my laundry list of bugs and nice to haves:
   - BUG - If I add silence to the beginning or end of a wavelength, it
   gets cut off when I save and close the wavelength. I then have to reopen
   the wavelength and add it back in and save it again. If I don't add silence
   the audio gets cut off when I publish. This has to be done for every slide
   I have and it's very repetitive.
   - BUG - If I create a movie over say 45 slides, the slides bleed into
   one another and images are lost or added to the next slide. If I use Fade
   for the transition it's even worse.
   - BUG - If I use Fade for a transition between slides with characters
   the characters bleed from one slide to the next.
   - NICE TO HAVE - The ability to set Preferences for characters per
   project or for all projects. For example, set the size and duration
   defaults.
   - NICE TO HAVE - It would be nice to have the default tab on the audio
   wavelengths be Edit not Add or Replace. I do a lot of narrating so having
   to click Edit for each slide becomes tedious.
OK, I want to be clear that I'm not beating up Adobe programmers and I do
LOVE the tool. It would just be a smoother experience if the above worked
or were in place. I do also have to add that I love all of the new widgets
and games!!! Haven't had time to explore them all, but I will soon and I'll
let you know more when I do. BTW are you sharing these email threads with
Adobe? Maybe we should put this online, what do you think?

Inserting a Video into Dreamweaver

There is an option to insert a Flash movie into Dreamwaever
CS3 but there is not an option to insert a Windows Media File or
file with extension .WMV , Could somepne please explain to me how I
accomplish this.
SPECTRA.

Try this:

<script type="text/javascript">
AC_AX_RunContent(
'width','320','height','300','classid','CLSID:22d6f312-b0f6-11d0-94ab-0080c74c7e95','id', 'mediaplayer1','type','application/x-mplayer2','pluginspage','
http://www.microsoft.com/Windows/Downloads/Contents/MediaPlayer/','src','YOUR_VIDEO_FILE.w mv','filename','YOUR_VIDEO_FILE.wmv','autostart','True','showcontrols','True','showstatusb ar','False','showdisplay','False','autorewind','True'
); //end AC code
</script><noscript><object width="320"
height="300"
classid="CLSID:22d6f312-b0f6-11d0-94ab-0080c74c7e95"
id="mediaplayer1"><param name="Filename"
value="YOUR_VIDEO_FILE.wmv"><param name="AutoStart"
value="True"><param name="ShowControls"
value="True"><param name="ShowStatusBar"
value="False"><param name="ShowDisplay"
value="False"><param name="AutoRewind" value="True">
<embed type="application/x-mplayer2"
pluginspage="
http://www.microsoft.com/Windows/Downloads/Contents/MediaPlayer/"
width="320" height="300" src="YOUR_VIDEO_FILE.wmv"
filename="01-Update_Products_nbb.wmv" autostart="True"
showcontrols="True" showstatusbar="False"
showdisplay="False"
autorewind="True"></embed></object></noscript>

Note that you can change the size of the viewer, whether or
not you want controls, etc.

Cannot insert wav files into captivate 6

I'm currently using Captivate 6 on the Mac. I have WAV files that I want to insert for audio. When I try to insert the WAV file I get the following message "Unable to import the audio file . Ensure that the file type is either MP3 or WAV. Also enusre that the file is not damaged." The file is WAV and the file is not damaged. Does anyone know what is going on? Why can't I insert my file. I've tried all of the possible methods i.e. menu, properties panel, etc.
These WAV files were created at a professional sound studio.

Hi there
You need to ensure that the studio encodes the files using PCM encoding. I've seen WAV files encoded as MP3 and that will cause the condition you are describing.
Cheers... Rick

What File format do I need to insert a Video into a Powerpoint?

HI...
Trying to get a video inserted into a power point. Am having a horrible time....Anyone know how to do this??

http://www.microsoft.com/mac/support

Inserting PIP video into captivate demo - audio problems

Similar Messages

Maybe you are looking for