Inserting plug-ins/effects to specific portions of track

hey there,
I've been using logic express 8 for a few weeks now and must say i do like it a lot. Although this one issue im not able to figure out on my own. I want to know how to insert a specific plug in to a specific portion of my audio track.
For example....I want to insert a flanger and adjust its parameters to only a small portion of my track 1....(minute 1:30-1:35)?
Is this possible?

Hi,
Logic can do this easily with Automation.
In the arrange window click View > Automation. In the left side of the tracks you'll see buttons pop up, often with "Volume" written on it (be sure that the height of the track is large enough; you may have to zoom in a little to see them). Press-hold the button, and you'll see a "chapter" called main with a little arrow next to it. Behind that you can choose things like "Insert #1 Bypass". Now you can draw automation lines in your track, that will switch you effects on or off.
Or you can choose ANY parameter of ANY plugin to automate.
If you click on Help > Logic Express 8 User Manual, and go to page 605, you can find detailed info on automation.
Kind regards,
Jaap

Similar Messages

  • Plug-ins, effects, fliters on soundtrack

    i was curious where more plug-ins, effects, or filters are available. There are not enough given w/ Soundtrack. Are there any place download some?

    Actually, I came to this forum looking for the very same thing. I would especially like to find normalize for Soundtrack. Thanks -
    iMac intel 20"   Mac OS X (10.4.7)  

  • Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)

    Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
    What can I do?

    Run the cleaner tool and install from scratch.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • Mixing page plug- ins/effects

    Hi
    When you use the effects/mastering plug Ins in the mix page, I know the cpu-intensive ones like SD should be on busses, but for others, like compression, limiters etc.. should you use them on individual channels , or use the insert /mastering settings on the master outputs ?
    It seems, at times, theres' too much to choose from...
    thanks

    Its common practice to use compression on individual channels for the kind of sounds that need it - for example, bass guitar or vocals usually need to be evened out to prevent the sound from fading away or dropping out at times - however, there are occasions when compression might be used as a sound shaping tool on a synthesised or sampled sound, that's where creativity comes in.
    Also common practice to compress different frequency bands (multipressor)on the master output and stick a limiter there last in the chain to stop any peaks over 0dB - you need to be at the 'finishing off' stage before you bother with these though - my autoload song has a track for the master outputs on the arrange page with the multipressor and limiter in bypass mode so that they're ready to bring in before the final bounce.

  • How can I insert a plug-in in front of already inserted plug-ins?

    If I already inserted and edited e. g. 3 plug-ins into an audio object, and now I want to insert another plug-in into the first position (e. g. Melodyne Bridge), how can I do that. In other words: I want the already inserted and edited 3 plug-ins to move to positions 2, 3 and 4, and the new plug-in into position 1.
    Best, Dietmar
    Power Mac G5 Dual 2.5 GHz   Mac OS X (10.4.4)  

    In the Environment you can move plug-ins if you Control click on the plugin, then press the Apple key down and drag. If you hold down the Option key too, you can copy plug-ins.
    Alternatively;
    If you don't have a Channel EQ instanced and it's little icon isn't in the area above the first slot, double clicking here will open the Channel EQ and push all the plug-ins down a slot. You can then replace the Channel EQ with the plug-in of your choice.
    Regards
    Stephen Bennett
    Author of:
    New Making Music with Logic Pro 7
    New Logic Pro Tips and Tricks
    Logic Virtual Instruments
    Making Music with Your Computer
    Published by www.pc-publishing.com

  • Online Videos that need plug-ins of a specific MIME type

    Hello. I'm trying to see some videos and dvd's on the internet but quicktime sends me a message that I need a special plug-in like MIME “application/x-oleobject” or MIME “application/x-mplayer2”. Were can I download this??? Can anyone help?
    Thank you

    I'm trying to see some videos and dvd's
    QT is not a DVD or VIDEO_TS folder player. Use the Apple DVD Player application instead. Most such content is encoded as multiplexed ('muxed") MPEG-2 video with either AC3 or PCM audio. While you could purchase the QT MPEG-2 Player Component ($19.99) and view the video content in the QT Player, it will not play the audio. An alternative to using the DVD player, would be to use the free VLC multimedia player. It would also likely be compatible with most common non-QT formats you may download from the Internet. Alternatively, you could install the Perian component package and/or the Flip4Mac component for viewing various PC/Windows (non-DVD/VIDEO_TS) commonly created files. Otherwise, you have to examine each movie's content and then download the specific required codec which may or may not be available for use on the Mac. (I.e., some codecs are so old that they have never been converted for use in OS X or transcoded for use on Intel Mac systems.)

  • How to insert Plug-Ins in Photoshop CC 2014?

    How do I insert plugins, such as Nik software and Topaz, in Ps CC 2014 so that they show in the filter menu?

    Topaz: Download and Installation Instructions – Topaz Labs Help Center
    Nik: Installation - Nik Collection Help
    Whatever brand of plugin you have, check the maker's website for the proper up to date CC 2014 versions, and look under Support for install and use instructions.
    Those instructions differ by maker, and we can't tell you off hand how to do this if they are not Adobe products.
    Gene

  • "Water Pane" Effect in FCPX freezing animation.  How can I reset FCPX to get my plug-ins/effect to function properly? Tried Pram reset, did nothing. Help!!

    My Water Pane effect in Final Cut Pro animates for a few seconds and then freezes up mid "drip"  and stays frozen.  video still plays fine in background, but Water Pane just sits there.  How can I fix this?

    If you don't get an answer here, you might post the question in the FCPX discussion here.

  • Migration Work Bench Plug-ins

    I got downloaded Oracle Migration Workbench for evaluation. I have installed it.
    It requires plug-ins which support specific other than oracle databases.
    When I consult the documentation, I have found the following information about
    downloading plug-ins at the link given. I haven't found any plug-ins there. I have searched
    for those in the site. where can I get plug-in's?
    Each plug-in available to you is database specific and extends the Migration Workbench to support the migration of a specific database to Oracle. After installing the Migration Workbench you must then install the plug-in for the database you want to migrate. By default, you download the Migration Workbench without any plug-ins. You can download the appropriate plug-ins from the Oracle Technology Network Web site at:
    http://otn.oracle.com/tech/migration/workbench/
    Thanks

    Hi,
    Click on the link you mention and then click on the software link on the left of the page (in the naviagation area). If you follow the next few pages to get through the license agreement etc., you will be presented with the full list of software for the Oracle Migration Workbench. You will find all the available plug-ins here.
    Regards,
    Blair.

  • What can I do to stop Logic from crashing with my plug-ins??

    I'm running...
    Logic Pro v9.0.0
    2Ghz Intel Core 2 Duo iMac
    2GB RAM
    Native Instruments KOMPLETE 5 plugins (mainly Battery3 and Electrik Piano)
    I have no problem with latency in audio recording and never even get crashes when using Logic plug-ins or running a lot of tracks at once.
    But when I use the Native Instruments plug-ins and start turning some knobs on their interface, Logic quits without warning.
    This isn''t all the time. But it does happen frequently, especially when running multiple plug-in instruments.
    I can still get work done if I hit save all the time but it is getting more frustrating as my song grows larger.
    Is there any sort of setting in Preferences that would help me with this?
    I just ordered another GB of RAM. Do you think that will help at all?
    What should I do? The KOMPLETE 5 instruments are too good to go without.
    Thanks.

    I ran Activity Monitor while opening a few projects in Logic. And it seems that I only have about 560MB of RAM left to play with once the song loads. Before I open Logic I have about 1.5GB of RAM that is free. So yeah, I think this is the problem.
    When I get my RAM in the mail, I'll try going plug-in crazy and see what happens. And then I'll post back here with the results for anyone that may be reading this in the future.
    But thanks for letting me know about Activity Monitor. I learn something new about my mac everyday. God bless.
    -Ryan

  • Effects plug-ins, and user preset weirdness

    Here's a headache for you.
    I've noticed that when using VST/DX effects in Audition that it adds its very own load/save preset bar to whatever effects application is in use, and that when saving presets with this quick access bar that it doesn't appear to save the presets anywhere within said efx plug-in's program directory.
    The end result is that user created presets saved in this way won't show up using said plug-ins in any other audio editing program.
    Audition manages to associate the proper user presets with their respective plug-ins, which leads me to believe it's saving the information in specific files/directories pertaining to each plugin.
    I've rooted around a bit in Audition's program directories and so far have come up with no helpful leads.
    This leads me to my question: where the hell Audition is saving these presets on the hard drive?

    Tell me, have you noticed AA not saving your VST/DX plugin settings from session to session? That is, it resets itself to a "default" setting when you exit the session and when you return to the session your effect settings are no longer in the state you left them, but in a "default" state.
    (This doesn't occur in any Pro Tools or Acid Pro, both of which "remember" the state in which I left them...)
    Your observation of AA adding its own preset bar is interesting. Pro Tools and Acid don't do that. I wonder if that has anything to do with the issue I described...?

  • Using After Effects plug-ins

    I've pointed to my After Effects plug-ins in the Motion preferences, but they don't show up in the filters menu. I've restarted several times, pointed to specific plug-in folders, pointed to AE 6.5 plug-ins and 7.0 plug-ins, Motion doesn't see them.
    I think it should. I'm running Motion 2.1.2 on a G5 with 2.5 GB ram.
    Anyone have a solution?

    Once again, for anyone else who might stumble upon this question, third-party filters DO NOT show up in the Add Filters area of the Canvas. They show up ONLY in the library. This fact may be of interest, and is not specified on p 793.

  • Plug-ins on inserts, busses, auxes, and outputs

    when the plug-ins are placed on inserts, busses, auxes, and outputs BUT in BYPASS mode, do they use any portion of CPU/RAM (or processing power)?
    should i be removing them instead of just selecting BYPASS...I do quite a bit of A/B ing.
    According to LP8 manual BYPASS mode does not really help with latency.
    "Note: In the All mode, bypassing plug-ins on busses, auxes, and outputs will not
    eliminate the latency that they create. You must actually remove these plug-ins from
    the Insert slots to eliminate latency."
    Thanks

    hi
    it does save cpu!
    Have a good weekend
    Best
    Steve
    http://www.realworldremixed.com/remixer.php?remixer_id=v8k7o6MtnPQeUMTPCsc

  • 3rd Party Plug-Ins Not Listed Under Inserts

    I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
    Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
    Please help.

    Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
    Cabarete
    Software response:
    validating Audio Unit Stylus RMX by Spectrasonics:
    AU Validation Tool
    Version: 1.2.1b3
    Copyright 2003-2007, Apple, Inc. All Rights Reserved.
    Specify -h (-help) for command options
    VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
    Manufacturer String: Spectrasonics
    AudioUnit name: Stylus RMX
    Component Info: Stylus Audio Unit.
    Component Version: 1.6.1 (0x10601)
    Component's Bundle Version: 1.6.1
    * * PASS
    TESTING OPEN TIMES:
    COLD:
    Time to open AudioUnit: 44.468 ms
    WARM:
    Time to open AudioUnit: 0.124 ms
    FIRST TIME:
    Time for initialization: 0.009 ms
    * * PASS
    VERIFYING DEFAULT SCOPE FORMATS:
    Input Scope Bus Configuration:
    Default Bus Count:0
    Output Scope Bus Configuration:
    Default Bus Count:8
    Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    * * PASS
    VERIFYING REQUIRED PROPERTIES:
    VERIFYING PROPERTY: Sample Rate
    PASS
    VERIFYING PROPERTY: Stream Format
    PASS
    VERIFYING PROPERTY: Maximum Frames Per Slice
    PASS
    VERIFYING PROPERTY: Last Render Error
    PASS
    VERIFYING PROPERTY: Instrument Count
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    * * PASS
    VERIFYING RECOMMENDED PROPERTIES:
    VERIFYING PROPERTY: Latency
    PASS
    * * PASS
    VERIFYING OPTIONAL PROPERTIES:
    VERIFYING PROPERTY Supported Number of Channels
    PASS
    VERIFYING PROPERTY Tail Time
    PASS
    VERIFYING PROPERTY Bypass Effect
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    VERIFYING PROPERTY Render Quality
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    VERIFYING PROPERTY Host Callbacks
    PASS
    * * PASS
    VERIFYING SPECIAL PROPERTIES:
    VERIFYING CUSTOM UI
    Carbon View Components Available: 1
    auvw StyM VST - Spectrasonics View
    PASS
    Cocoa Views Available: 0
    DEFAULT PRESET: 0, Name: unused
    auvaltool(714) malloc: * error for object 0x13d3f850: double free
    * set a breakpoint in mallocerrorbreak to debug
    HAS FACTORY PRESETS
    VERIFYING CLASS INFO
    WARNING: Preset name is not retained in retrieved class data
    PASS
    TESTING HOST CALLBACKS
    PASS
    * * PASS
    PUBLISHED PARAMETER INFO:
    # # # 74 Global Scope Parameters:
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    * * PASS
    FORMAT TESTS:
    Reported Channel Capabilities (explicit):
    [0, 2]
    No Input, Output Chans:
    0-1 0-2 0-4 0-5 0-6 0-7 0-8
    X
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
    * * PASS
    RENDER TESTS:
    Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Render Test at 512 frames
    Slicing Render Test at 64 frames
    PASS
    Render Test at 64 frames, sample rate: 22050 Hz
    Render Test at 137 frames, sample rate: 96000 Hz
    Render Test at 4096 frames, sample rate: 44100 Hz
    Render Test at 4096 frames, sample rate: 192000 Hz
    Render Test at 4096 frames, sample rate: 11025 Hz
    Render Test at 512 frames, sample rate: 48000 Hz
    PASS
    Checking parameter setting
    Using AudioUnitSetParameter
    Using AudioUnitScheduleParameter
    PASS
    * * PASS
    AU VALIDATION SUCCEEDED.
    validation result: successfully validated
    updating properties of AU Stylus RMX by Spectrasonics...done.

  • PproCS3 effects Plug-ins

    Hi, does anyone know which special effects plug-in's file types are supported in Premiere pro?

    My guess is no such things exist. Programmers make plug-ins for specific programs. You're not likely to find any way to change a Final Cut Pro plug-in to a Premiere plug-in. If the developer of the plug-in hasn't made a version specifically for Premiere, chances are you're out of luck.

Maybe you are looking for