Inserting Pull-down into 23.98fps NTSC Video to make it 29.97fps...

Hi all,
I need to convert 23.98fps NTSC Video to 29.97fps NTSC (i.e, add 2:3:2:3 pulldown). How can I do this without having to use a Firewire-connected Recorder?
Basically, is there a software solution involving just Final Cut Studio?
Thanks in advance for your help,
Regards,
Rajnesh

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Similar Messages

Picture card inserted upside down.Help Please.

An XD picture card was inserted upside down into bridge media adapter slot.It is entirely into the slot. Can anyone tell me how to safely remove it? Thanks in advance for any help?

wallflower wrote:
Model: 9360
The other day I needed to take a quick picture but my memory card was full so I quickly changed the settings to save the pictures to the device. Now, I would like to delete some of the pictures but delete isn't even an option in the menu and one of the pictures have a yellow globe infront of the photo name. I would really like to delete these pictures, what should I do?
Suggestions? Similar experiences?
Try renaming, or moving the pictures back.
Another thing to try, is connect the phone via the USB port on your computer. Set the phone to allow it to be used as a USB storage device. See if you can access the phone on your computer as if it is an external storage device. You should be able to explore the memory of the phone with your computer.
For access to a BB phone the drivers have to be first installed for the computer to be able to work with the phone. You can install the desktop manager software. Also if I remember properly, I believe the Desktop manager software can manage the media contents of the BB phone.
Jerry G.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

On imovie, I am trying to save my video, but none of the selections on the "share" pull down are active.

I am trying to save and post a video on Facebook. When I go into the Share menu...none of the pull down choices are active. What do I need to do to be able to save my video and share it?

You need to create a project. You can only share from a Project.

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc, does anyone know how to fix this? The photo's I burnt on the exact same type of disc work fine in both pc and macbook but the videos will only play on the pc.

If you are trying to play these on quicktime then what video format are those videos?
Wmp's? You need to install Flip4Mac.
Most other formats? Install Perian.
Or just use vlc instead. It's a much better, more powerful, and more general video player.

Inserting a pause into a video?

I am looking to insert a pause into a video I am editing using Captivate 6. One section of the video is too pacy and i need to freeze it for a couple of seconds then have it restart automatically, or slow motion etc. Is it possible to do this without a button?

You're editiing in Captivate, correct? My favoirite way to "freeze" while editing this is to:
1. Split the video at the point you want it to freeze.
2. Take a screen capture of the video at the split - insert this image on the timeline.
3. Extend the screenshot for as long as is needed to display the information you needa
4. Move the next video segment to the other end of the image on the timeline.
You just effectively"froze" the screen for as much time as you wanted. There's probably a more elegant solution, but it's my two cents.
Justenuf

Is it possible to have a link/button inserted into the end of my flash video that makes up the first page of my web site

i am not sure if this will make sense so please tell me if it
doesn't. is it possible to have a link/button inserted into the end
of my flash video that makes up the first page of my web site. the
video plays showing the name of the site then fades to show the
text "enter" which i want to make the link to the next page.

> the video plays showing the name of the
> site then fades to show the text "enter"
in FLASH set a gotourl action on the last frame of the move.
If this is a "splash page" and has a dancing company logo and
a throbbing
drumbeat- reconsider. Just make the homepage of the website
the homepage.
Don't make people wait to see some content.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

I have no window into which to type a url. Also there are no pull-down tabs.. options? tools? etc. Do I need to remove Firefor and RE-install?

Firefox worked fine yesterday. Now I have no window into which to type a url. Also there are no pull-down tabs.. options? tools? etc.
== just now when I started Firefox

'''''"...no pull-down tabs.. options? tools? etc."''''': see Menu Bar below.
'''''"...no window into which to type a url"''''': that's the URL/location bar located on the Navigation Toolbar; see below.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

Having trouble inserting a logo into my video

I am having difficulty inserting a logo into my video. Whenever, I am successful, and I go to play the video, the logo moves out of place. I deleted all of the effects but am still having trouble with it.

We have no idea what the problem is or how you applied the logo from that brief description!

How do you insert a picture into an iMovie video?

how do i insert a picture into an iMovie video? (i know it's simple and i've done it before, but i can't figure it out now )

Just drag it onto the Project timeline From iPhoto or outside of iMovie...
rick

Inserting still images into video

I have PS CS4 Extended, and I am pretty new to working with video. I need to insert still images into several continuous frames of video after removing the frames that are there. Can anyone help point me in the right direction?

Hello, wooblesmom. This is actually the forum for Photoshop Elements. Questions about CS4 will get better answers in the appropriate forum. The Photoshop forums are here:
http://forums.adobe.com/community/photoshop
Good luck!
Incidentally, if you really meant to ask about Premiere rather than Photoshop, those forums are here:
http://forums.adobe.com/community/premiere

Video is normal until I drag the clips down into Sequence 01, and then they are severely cropped.

Video is normal until I drag the clips down into Sequence 01, and then they are severely cropped on all sides. What setting do I have wrong?

Hi Brenda44,
Please right click on the clip in the project panel and select new sequence from clip option to create a sequence according to your clips.
Regards,
Vinay

Problem logging into iPlanet Calendar Server from pull-down menu in Communicator

When I run the iPlanet Calendar Server's cstool
utility and enter the command 

cstool -p 80 ping name.of.server
 

I receive the message 

Calendar Server is up and running!

I can also access the LDAP service of the Calendar Server with no problem.
However, if I try to connect to this server using the pull-down menu for
Netscape Communicator 4.7 with Calendar, I receive the error message 

The server is unreachable. Verify that the network is available and that the
server application is running.

To use the iPlanet Calendar Server client, point your browser at the client
port that was specified when the iPlanet Calendar Server was installed.

For example, 

http://your_server_name:80

If you forgot which client port is specified, you can find the value for the
port number in the service.http.port
parameter in the server's
/opt/SUNWicsrv/cal/bin/config/server.conf
file.

So if you accepted the defaults during the installation process who are the database users? ias_admin? system? sys? I've tried all and gotten ORA-01017: invalid username/password; logon denied. These fail in the OEM console as well. I apologize in advance if the answer is embarassingly obvious.

IWeb not showing .Mac web gallery albums in Web Widgets pull down menu

I'm trying to update a webpage and insert a .Mac Web gallery album using the Web Widgets pull down menu. The problem is the menu isn't offering/showing ALL of my .Mac Web Gallery albums. It shows some and I can insert those, however, it isn't showing all of them. I've tried refreshing the list in iPhoto, but it still won't show in iWeb '08. I've even given it several days to refresh, but to no avail.
Any suggestions?

Nice, didn't think of that. I went into iPhoto and, in the Settings, changed it from being only viewable to restricted groups. I opened it up to "Everyone" and, back in iWeb, there it appeared in the Web Widget pull down menu. I then inserted the album and published the web page. I then went back to iPhoto re-instated the restrictions in the Advanced settings.
Thanks.

Help with inserting SWF file into .html page

I created a photo gallery in Flash CS5.5, using the advanced photo gallery template. It works fine as a standalone SWF file but it's not displaying properly when I try and insert it into the Gallery page of my website.
The thumbnails are showing as blank white boxes and the main image holder isn't showing at all, though the controls beneath it are showing. The SWF file and all the images are stored in site/images/gallery/ and my Gallery page is in the root. What's going on here? Can anyone help please?
Thanks

If you are storing any of your Flash assets in sub-folders and having problems... it's most likely because of pathing problems. For review:
Pathing issues
Almost always when it works on the local machine and not the server, it's a pathing problem.
You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location. So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
Best wishes,
Eye for Video
www.cidigitalmedia.com
What it boils down to is that you need to path the Flash assets from the Web page that you place the main .swf on... NOT the physical location of the .swf
Best wishes,
Adninjastrator

Inserting Pull-down into 23.98fps NTSC Video to make it 29.97fps...

Similar Messages

Maybe you are looking for